Gebra Gitterrostbau GmbH

Condition: used, Year of construction: 2007, Wire EDM machine MITSUBISHI FA20S, No. 07F2A056, year of manufacture 2007, working area 500 x 350 x 300 mm Dcedpfx Aceyhql Eo Nsc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iA Dedeyhb D Eepfx Ac Nocc

Condition: reconditioned (used), Year of construction: 2006, operating hours: 17,800 h, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 420 mm, type of input current: three-phase, overall weight: 2,650 kg, table load: 400 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 17 A, positioning accuracy: 0.001 mm, We offer this reconditioned AGIE AGIECUT PROGRESS 3 wire EDM machine, year of manufacture 2006. Serial number: 214 Machine list: 033.300 Year of manufacture: 2006 Electrical diagram: 630.972 Weight: 2650 kg Voltage: 3 x 400 V Frequency: 50 Hz Power: 12.1 kVA Dcsdpoyghmwofx Ac Nec Rated current: 17.5 A Short-circuit current: 10 kA If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Table dimensions: 700 x 450 mm Z-axis travel: 255 mm Y-axis travel: 250 mm X-axis travel: 350 mm MACHINE DIMENSIONS: L: 2100 mm x W: 2000 mm x H: 2200 mm Dcedpfxeycidpe Ac Noc

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000X Year of manufacture: 2021 Travel distances: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Dcjdpfxoych Rze Ac Nsc Achievable surface finish: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading With automatically lowering work tank (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D Incl. automatic wire changer AWC (use of 2 wire spools) Incl. Conic-Plus option Incl. Fast-Threading option Incl. Smart-Threading option VISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be fully cleaned, overhauled, and thoroughly tested after receipt of order. We conduct laser measurement of the axes at our premises. On request, we are also happy to carry out a custom test on the CUT 3000 for you. Includes user training at Techma on your overhauled machine We are happy to optionally offer: - Transport - Commissioning - Chiller unit - Clamping devices - Consumables

Condition: good (used), Year of construction: 2017, Datasheet: en-datasheet-robocut-ds-c600ib     FANUC ALPHA C600iB – 2017 Wire Cutting EDM Machine Standard specifications – Maximum workpiece dimensions: 1050 × 820 × 300 mm – Maximum workpiece weight: 1000 kg – XY axis table travel: 600 × 400 mm – Z axis travel: 310 mm – UV axis travel: 200 × 200 mm – Maximum taper angle: ±30° / 150 mm – Minimum step increment: 0.0001 mm – Wire diameter: Ø 0.10 to Ø 0.30 mm – Maximum wire weight: 16 kg – Footprint (W × D): 2440 × 2680 mm Dedpfxeyccqis Ac Nscc – Machine weight (approx.): 3000 kg – Controller: FANUC 31i-WB – Part program storage size: 4 MB Acoustic noise level – LPA: 64 dB – LPCpeak: 81 dB Optional equipment Z axis 400 – Z axis travel: 410 mm – Maximum workpiece dimensions without automatic front door: 1050 × 820 × 400 mm – Footprint: 2790 × 2680 mm Automatic front door – Maximum workpiece dimensions: 1050 × 775 × 300 mm 45° die guide – Maximum taper angle: ±45° / 70 mm 30 kg wire feed unit – Maximum wire weight: 30 kg

Condition: refurbished (used), Year of construction: 2010, operating hours: 9,563 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,100 mm, total width: 2,800 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 4,440 kg, table length: 950 mm, GF CUT30P - 2010. Available for inspection at our premises in Semsales (Switzerland). Viewing by appointment. More information upon request. Dodsyazkcopfx Ac Nocc

Condition: used, Year of construction: 2004, 1 wire EDM machine, manufacturer Mitsubishi, model FA 20, year 2004, with filtration unit, internal no. 13 Djdpeyaw Siofx Ac Nocc

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, controller manufacturer: FANUC, controller model: 310is-WA, number of axes: 5, This 5-axis FANUC Alpha 1ID wire EDM machine was manufactured in 2008. It offers precision and efficiency for intricate metalworking tasks. If you are looking to get high-quality EDM capabilities, consider the FANUC Alpha 1ID machine we have for sale. Contact us for more information. Additional equipment • Includes all accessories in the photos • Includes digital documentation Machine Benefits Technical Machine Benefits • Internal dimensions of the work tank: 1100 x 800 mm • Wire diameter: 0. 1 mm to 0. 3 mm (0. 25 mm present on the machine) • Wire spool capacity: up to 16 kg • Automatic wire cutting and feeding Extra Information Dodeyali Ajpfx Ac Nocc Machine still under power

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, number of axes: 5, This 5-axis Mitsubishi MV2400 S wire EDM machine was manufactured in 2016. It features a 600 mm X-axis travel, 400 mm Y-axis travel, and 310 mm Z-axis travel. Capable of handling workpieces up to 1500 kg, it offers dimensions up to 1050 mm in length and 820 mm in width. Consider the opportunity to buy this Mitsubishi MV2400 S wire EDM machine. Contact us for more information. • Maximum workpiece length: 1050 mm • Maximum workpiece width: 820 mm • Maximum workpiece height: 305 mm • Maximum workpiece weight: 1500 kg Dedjx Urafspfx Ac Nscc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece weight (max.): 200 kg, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 2,455 mm, total length: 3,000 mm, total width: 3,760 mm, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, type of input current: three-phase, overall weight: 3,700 kg, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, Equipment: cooling unit, documentation/manual, Wire EDM system GF AgieCharmilles CUT 2000 with loading robot Power on time: 91,716 h Operating hours: 17,889 h The system consists of a CNC wire EDM machine GF AgieCharmilles CUT 2000 with integrated automation/loading robot (WorkPartner) and is ideally suited for precise series and single-part production. The CUT 2000 is designed for highly accurate contour cutting with excellent surface quality and stable process control. It features the Vision-5 control unit (Windows XP), automatic wire threading system, integrated dielectric unit, and coaxial flushing, enabling reliable, low-manned operation. Dcjdpex S Ehkjfx Ac Nsc The loading robot (GF WorkPartner) transforms the machine into an automated production cell. Depending on the magazine version, workpieces weighing approximately 400 to 800 kg in total can be handled. Automatic loading and unloading allow for extended run times without operator intervention and significantly increase productivity.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Progress VP3 Year of manufacture: 2011 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V-axis travel paths: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in the water tank) / 800 kg (without tank) Dcodpfxsx Sxa Tj Ac Nec Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side only) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V Generator AGIEVISION 5 CNC control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and fully overhauled after receipt of your order. You will receive a 6-month warranty on all machine parts. Commissioning and training services are also available on request.

Condition: like new (used), Year of construction: 2022, operating hours: 3,973 h, functionality: fully functional, Worktable size: 700 x 500 mm Travel (X, Y, Z): 400 x 300 x 300 mm Dcodjx Sd N Tspfx Ac Nec Maximum electrode weight: 50 kg Maximum workpiece size: 900 x 650 x 350 mm Machine dimensions (L x W x H): 2315 x 2200 x 2420 mm Machine weight: 3,500 kg Controller: MITSUBISHI M800 D-Cubes CNC Dimensional accuracy: X, Y, Z / C: 0.1 µm / 0.0001° Standard accessories: - MITSUBISHI M800 D-Cubes CNC controller with 19" color multi-touch screen - FUZZY LOGIC control design - GV80 high-performance pulse generator - IDPM3 generator (standard) for graphite electrode machining, controls processing, reduces machining time and electrode wear - ESPER D-Cubes integrated programming system - Linear scale on Z axis - Controlled "C" axis with EROWA quick-clamping for positioning - Dielectric cooling system - Automatic central lubrication - Fire extinguishing system - Wide linear guides (THK) - Large-diameter direct-drive ball screw - CE-compliant design The machine comes with 18 EROWA collet holders and 2 EROWA clamp bases for electrode manufacturing, as well as one electrode measurement device and one workpiece measurement device. The machine is equipped with a 20-position tool changer and linear scales on all axes. Approximately 300 liters of dielectric fluid are also included. All factory accessories, machine manual, add-ons, and tool set are included. The machine is almost like new.

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 250 mm, For sale: Mitsubishi FA20S wire EDM. For all information, please contact us via email or phone. Additionally, we have several spare parts available for a Mitsubishi FX20, year 2000. Dodpex Rprqofx Ac Njcc

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Djdox I Akuspfx Ac Nscc Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, GF AgieCharmilles Classic V3 Year of manufacture: 2006 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-Axis Travels: +/- 70 mm Maximum taper: 30° at 100 mm height Dedpjx Hzvyofx Ac Nscc Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine has already been cleaned, overhauled and tested by us. We are happy to perform a customized test cut for you. You will receive a 6-month warranty on all machine parts. Commissioning and training are also available upon request.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, GF Charmilles EDM FO 550 Sp c/w ATC 16 - 2 units Year 2010 c/w RTC 16 (Robot Tool Change) X-Axis Travel 600mm Y-Axis Travel 400mm Z-Axis Travel 450mm Control Charmilles Touch Tool Changer - RTC16 Power Source 64 AMP Djdpfx Acox Hp Ukj Njcc C-Axis - Yes Chuck System 3R

Condition: used, Year of construction: 2017, Technical details: travel -x axis: 600 mm travel -y axis: 400 mm travel -z axis: 310 mm max. size of workpiece LxWxH: 1.050 x 800 x 295 mm max. workpiece weight: 1.500 kg table-size: 840 x 640 mm U-axis: + / - 75 mm V-axis: + / - 75 mm conical grinding: 15° / 260mm rapid traverse: 1,3 m/min wire dia.: 0,1 - 0,3 mm wire-forward-feed: max. 23 m/min weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,7 x 3,1 x 2,2 m wire eroding machine, autom. wire threading (AWT), chiller, tank incl. ion-exchange resins, clamping devices, reference tooling, aligning tools for wire, documentation aüürox. 9.100 h "machine on", approx. 4.200 h "working hours" Dcsdpfx Asx Hp Nhsc Noc *

Condition: used, Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Dcsdpfjx Hgg Dex Ac Nec

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 03DR2150, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, overall weight: 3,500 kg, Equipment: cooling unit, Wire-Cut EDM Machine The machine comes from productive operation and is in fully functional, used condition. All relevant assemblies are complete; the generator cabinet, control system, wire feed, and AT system (Automatic Threader) are all present and complete. Running times according to control system: Processing time: approx. 29,062 h NC on-time: approx. 43,836 h Ready-/TFT downtime: approx. 8,966 h Maintenance records (excerpt): Filter change: last performed at 176 h / 200 h Resin change: 21 h / 1000 h Oil refill: 742 h / 1000 h Conductivity sensor: 742 h / 1000 h Current supply rotation: 57 h / 80 h The machine is complete but shows typical signs of use after more than 10 years in operation Accessories are extensive and well organized Servicing always confirmed as per control system Automatic threading system included Accessories / Equipment: Original Mitsubishi nozzle & roller/bearing kit: various guide rollers upper and lower diamond guides nozzle set (upper/lower nozzle) drying stones / assembly tools NSK/Japan replacement bearings spare tension rollers Manufacturer’s wooden box Mitsubishi Electric Spare and consumables: resin container (packed) filter elements quick adhesive components A/B pH test strips process chemicals (for EDM) logbook / maintenance records Documentation / manuals: complete folders: Operator’s Manual MV Part 1 & 2 training materials “Advance Series” Dcjdpsx Hadvefx Ac Noc operating instructions (German) maintenance and AT maintenance sheets Travels (X / Y / Z): 600 × 400 × 310 mm Working table / workspace: table size: 840 × 640 mm (square table) max. workpiece dimensions: 1050 × 800 × 295 mm max. workpiece weight: 1,500 kg Wire data: wire diameter: 0.1–0.3 mm max. wire feed: 23 m/min tension: 0.5–25 N automatic threading (AT), including fine-threading Taper cutting: opto-linear T/C device, ±75 mm (X/Y), max. taper angle 15° at 260 mm workpiece height Generator / Control system: transistor-controlled pulse generator 15" LCD touch control 6-axis simultaneous control integrated 2D and 3D CAM (Parasolid viewer) NC memory up to 1 GB USB interfaces (2×) Dielectric system tank capacity: 860 l filter flow rate: 50 l/min paper filters (2 pcs) resin container 10 l (ion exchanger)

Condition: excellent (used), Year of construction: 2015, operating hours: 5,090 h, functionality: fully functional, machine/vehicle number: T0298, workpiece weight (max.): 850 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 245 mm, workpiece length (max.): 670 mm, type of input current: three-phase, table width: 960 mm, input frequency: 50 Hz, Equipment: cooling unit, The Sodick VZ500L is a wire-cut EDM (Electrical Discharge Machining) machine from Sodick, designed for electro-erosive machining of metals. This is a wire-type machine equipped with linear drives, enabling precise cutting of intricate shapes at an angle based on CAD files (e.g., DXF, STEP, IGES). Main features: Type: Wire-cut EDM Manufacturer: Sodick Model: VZ500L Drives: Linear Working range (X x Y x Z): 500mm 350mm 250mm Maximum workpiece dimensions: 960mm 670mm 245mm Dcjdpfex Ekcysx Ac Noc Maximum workpiece weight: 850 kg Capabilities: Angular wire cutting (based on 3D models) Additional features: Automatic wire feeding (AWF) Immersion in dielectric fluid

Condition: excellent (used), Year of construction: 2019, operating hours: 4,247 h, functionality: fully functional, machine/vehicle number: T1284, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 370 mm, total height: 2,570 mm, total length: 1,852 mm, total width: 2,825 mm, workpiece height (max.): 400 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, type of input current: three-phase, table width: 750 mm, overall weight: 5,350 kg, table length: 550 mm, table height: 400 mm, empty load weight: 5,350 kg, table load: 1,500 kg, input voltage: 400 V, input frequency: 50 Hz, The Sodick AG60L die-sinking EDM was manufactured in 2019. It features a ceramic table measuring 750 x 550 mm and can handle a maximum workpiece weight of 1,500 kg. The machine is equipped with a linear motor, glass scales, and a remote control unit, which enhance both precision and operator convenience. We invite you to purchase the Sodick AG60L die-sinking EDM. Please contact us for further details about this machine. Axis travel (X/Y/Z): 600 / 420 / 370 mm Equipment includes: replaceable paper filter, SEC-10 (C-axis), SGF2 Nano Wear Unit, fire extinguisher, TMM3 Power Generator, dielectric cooling unit, 15" TFT touchscreen, linear motors (X, Y, Z axes), glass scales (X, Y, Z axes), ceramic work area, remote control. Machine dimensions (LxWxH): 1852 x 2825 x 2570 mm / Machine weight: 5,350 kg Max. workpiece weight: 1,500 kg / Ceramic table size (W x D): 750 x 550 mm Distance floor-to-table: 850 mm / Max. electrode weight: 50 kg Dcedpox Ekb Nofx Ac Noc Dielectric fluid level (min-max): 150 – 400 mm / Dielectric capacity: 465 liters

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, overall weight: 3,000 kg, controller manufacturer: FANUC, controller model: RoboCut α-C600iA, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis FANUC RoboCut alpha C600iA was manufactured in 2015, featuring X/Y axis travel of 600 mm × 400 mm and a Z-axis option up to 410 mm. It supports a maximum workpiece weight of 1000 kg and utilizes a FANUC Series 31i-W MODEL B CNC for precise control. Equipped with AI technology for enhanced accuracy and automatic wire threading, it's ideal for detailed machining tasks. Consider the opportunity to buy this FANUC RoboCut alpha C600iA wire edm machine. Contact us for more information. Dcedpfex D Duqjx Ac Nec • Axis travels: X/Y 600 × 400 mm; Z 310 mm (optional 410 mm); U/V ±100 × ±100 mm • Max workpiece size: 1050 × 800 × 310 mm (standard) • Max workpiece weight: 1000 kg • Max taper angle: ±30° at 150 mm (optional ±45° at 70 mm) • Positioning/minimum step size: 0.0001 mm • Achievable surface roughness: up to Ra 0.3 µm • Automatic wire threading (AWF): approx. 10 s under water; rethreading inside submerged cuts • AI Corner Control: optimizes cutting speed and flushing in sharp corners • ECO Mode: energy and wire consumption reduction functions • Applications/materials: steel, aluminum, titanium, nickel alloys; mold & die, aerospace, medical, precision parts

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 530 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.35 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis ONA KE350 wire EDM machine was manufactured in 2002. It features X/Y/Z travels of 530 × 350 × 400 mm and U/V travels of 140 × 140 mm, supporting a maximum workpiece size of 1050 × 800 × 400 mm and weight up to 3000 kg. It includes high-precision closed diamond guides and capabilities for automatic wire threading and water temperature control. Consider the opportunity to buy this ONA KE350 wire EDM machine. Contact us for more information. • U/V axis travel: 140 × 140 mm • Maximum workpiece size (X, Y, Z): 1050 × 800 × 400 mm • Maximum workpiece weight: 3,000 kg Dsdpfjx D D Tasx Ac Nscc • Taper cut angle (400 mm Z): 9° / 400 mm • Maximum taper cut angle: 30° / 100 mm • Wire spool types: DIN 100, DIN 125, DIN 160, DIN 200, DIN 355 • Guide type: closed diamond, high-precision, zero backlash • Positioning resolution (X, Y, U, V): 0.001 mm • Minimum programmable increment: 0.001 mm • Wire cutter: yes • Automatic wire threading: yes Additional equipment • Water chiller / temperature control: yes • Water/sludge cleaning system: yes

Condition: excellent (used), Year of construction: 2017, Manufacturer Fanuc Model Robocut ∝-C 600iB Year 2017 Dsdsx Avh Hspfx Ac Nocc Condition Used Maximum weight of the part 1000 kg X 600 mm Y 400 mm Z 310 mm Z (optional) 410 mm U ±100 mm V ±100 mm Maximum tapered cutting angle ±30° in 150 mm Wire diameter 0.10 to 0.30 mm CNC System FANUC Series 31i-WB Machine dimensions (W x D x H) 2440 x 2430 x 2160 mm Machine weight 3000 kg