Mashlazer

Condition: ready for operation (used), Year of construction: 2004, Immediately available from Swiss operation: CNC Punch – Nibbling Machine Boschert Lajdpfx Ajxqbhzeb Uoh Type TWIN 750 CNC/Z Year of manufacture: 2004 Working area: 810 x 1500 mm Sheet length with repositioning up to 9999 mm Table: 750 x 3500 mm Revotol 6 Hydraulic punching force: 28 tons Max. workpiece weight: 200 kg Strokes/min: 250 Strokes/min with fast cycling: 800 X-axis speed: 60 m/min Y-axis speed: 30 m/min Simultaneous X & Y-axis speed: 67 m/min Trumpf tooling Accuracy: plus/minus 0.05 mm Connection: 4.8 / 11 kW Complete tooling included Weight: 11.5 tons Price: EUR 9,000.– plus VAT ex location

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm Laedpexn Tywjfx Ab Uoh SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute - Programmable support table - Good parts container - Scrap container - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch - Punch slug extraction - Forming - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 60 h, functionality: fully functional, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Laedoxmfc Ujpfx Ab Ueh Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Maximum sheet thickness: 6.4 mm Punching diameter: 76.2 mm X-axis travel: 2,500 mm Y-axis travel: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed rotary axis: 360 °/sec Workpiece weight: 150 kg Lsdpfsxhfu Hjx Ab Ujah Smallest programmable increment: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions: 6,400 x 5,800 x 2,100 mm Approx. machine weight: 11,050 kg Operating hours: 30,430 h

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 11.22-LP6122804, The Finn-Power LP6 SWT is a combined laser and punching CNC machine designed for high-efficiency sheet metal processing. Manufactured in 2004, this model integrates hydraulic punching and CO₂ laser cutting technologies, making it suitable for complex and versatile manufacturing tasks. Ledpfx Aexcnipeb Usah

Condition: good (used), Year of construction: 1988, operating hours: 41,994 h, functionality: fully functional, X working area max.: 2500 mm Y working area max.: 1300 mm Operating hours: 41,994 h Control unit: Bosch Trumagraph CC300 Standard equipment: - 10 tool cassettes - 10 die plates - Rotation of all tools - Automatic repositioning - Tool length compensation - Small part chute 500x500 mm - Punch slug extraction - Forming capability - Programmable punching tool lubrication - Programmable hold-down device - Safety devices + Retractable clamps Lsdpfjxbcqfex Ab Ueah

Condition: ready for operation (used), Year of construction: 2000, operating hours: 20,000 h, functionality: fully functional, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Sheet size: 1,500 x 3,000 mm MACHINE DETAILS Operating hours: 20,000 h Laedpfx Aew Swdisb Uoh EQUIPMENT Material handling Tools Grinding machine

Condition: good (used), Year of construction: 1999, functionality: fully functional, Product Description FINN POWER TP 250 CNC Travel distances: Ljdpfx Aowxw Uijb Usah X: 1020 mm Y: 1020 mm Control System: Sinumerik 3N Punching force: 250 kN Max. punching diameter: 85 mm Max. sheet thickness: 8 mm Machine dimensions: 3500 x 2300 x 2300 mm Machine weight: 5800 kg

Condition: refurbished (used), Year of construction: 2014, operating hours: 35,418 h, functionality: fully functional, punching force: 18 t, sheet thickness (max.): 6 mm, feed length X-axis: 2,500 mm, feed length Y-axis: 1,250 mm, HIGHLIGHTS - Last maintenance in February - Punch head: stripper holder and seals replaced - Lower clamping piston replaced - C1K encoder and needle bearing renewed - All wear parts and maintenance items serviced TECHNICAL DETAILS Max. punching force: 180 kN Ledpfewu Evyjx Ab Ueah Working area: 2,500 x 1,250 mm Max. sheet thickness: 6.4 mm Control: Bosch MTX CMP70 Tool system: 18 tool stations, with 2 clamps Part chute: 500 x 500 mm Hydraulic single tool holder: 360° rotation Programmable hold-down device: active / passive / re-track MACHINE DETAILS Operating hours: 35,418 h (28.02.2025) Space requirements: 6,500 x 6,000 x 2,230 mm Machine weight: 9,800 kg Total connected load: 18 kVA EQUIPMENT - Rigid, easily accessible C-frame - Linear magazine for tool stations - Foot switch for clamp closing - Servo-electric punching head - Punch lubricator (spray lubrication) - Punch slug extraction - Adjustable hold-down force - 17" touch screen - Teleservice via Internet - Automatic shutdown - USB interface - CE marking - Multi-beam safety light barriers - Hydraulic quick shut-off - Multitool function - Deburring and roller technology function - Thread forming function - Engraving tool function - Marking/fast bead forming function - Sensor for part chute - Vibration-dampened installation

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, punching force: 28 t, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, punching diameter: 105 mm, TECHNICAL DETAILS Punching force: 280 kN Working area: 1500 x 3000 mm Sheet thickness: 6.4 mm Workpiece weight: 200 kg Punching diameter: 105 mm X-axis: 60 m/min Y-axis: 30 m/min MACHINE DETAILS Machine weight: approx. 16,000 kg Ledpfx Aswuryljb Ujah EQUIPMENT No further information available.

Condition: good (used), Year of construction: 2009, operating hours: 44,287 h, functionality: fully functional, X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 44,287 hours Control system: Bosch PNC-P Standard equipment: Machine - Stable, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 18 tool positions including 2 clamps - Drives with maintenance-free three-phase motors - Reloading device with programmable hold-down device - Ball tables - Part chute 180 x 150 mm - Automatic shut-off Punching head - Hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down device - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming Control system - Open control system based on Bosch PNC-P - Control panel with 15" TFT color screen - Program management - Integrated Technology Data - Teleservice Data Transfer - USB Interface and Network Connection Safety - CE Marking - Multi-Beam Light Barriers Lajdpfx Ajwlifmob Ueh - Hydraulic Quick Shutdown + Multitool Function + MultiShear Function + MultiBend Function + Thread Forming Function + Marking/Fast Beading Function + Deburring and Rolling Technology Function + Soft Punch Function + Movable Support Table + Part Slide Sensor + Vibration-Dampened Installation + 2nd Stop Pin + Bow Detection

Condition: excellent (used), Year of construction: 2006, punching force: 28 t, punching diameter: 105 mm, throat depth: 1,500 mm, Boschert TWIN 1500x2000 Rota-Index TRUMPF quick-change tool system Station 1: Rotation with index option for Boschert Multitool Max. punching diameter 105 mm. Tool continuously rotatable. Station 2: Max. punching diameter 105 mm with Boschert Multitool Revotool insert option. Incl. 8-way tool holder. Punching force: Yes, 280 kN (28 tons). Travel range x- 2050 mm (repositioning up to 9999 mm). Y- 1580 mm. Punching arm reach: 1750 mm. Tool system: Trumpf Gr1-3 (105 mm) and Boschert Revotool. Labod 32060 graphic control system / workshop programmable. Max. sheet thickness: 6 mm (clamp opening). Max. stroke height: 90 mm, continuously programmable up and down. Table width left + right: 2250 mm each Table depth: 3250 mm Table height: 900 mm Total width: 4900 mm Total depth: 4800 mm Total height: 2080 mm Drive power: 20 kVA Machine weight: 15,000 kg Hydraulic oil capacity: 160 l Color: Blue RAL5017/Light gray RAL7035 Machine built in 2006 Ball transfer table Slug extraction system Fast hydraulics Very well-maintained condition Laodpfewdmwqjx Ab Ujh With accessories

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 5820387, punching force: 30 t, sheet thickness steel (max.): 8 mm, working range: 3,000 mm, travel distance X-axis: 2,500 mm, CNC punching machine with fully automatic loading system TECHNICAL DETAILS Control: CNC AMADAN 04 P-C Automation & Safety Loading system: LKI L III 250 automatic loader Unloading system: PR III automatic unloader Sorting: Automatic part sorting on pallets possible Noise protection: Noise protection hood Safety equipment: SICK photoelectric sensors, original safety fences Processing capacity Punching force: 30 t Max. material thickness (steel): 8 mm Working area: 3,000 mm X-axis travel: 2,500 mm Table system Table type: Brush table for quiet operation and scratch-free processing Repositioning: Automatic sheet repositioning Tool lubrication: Air Blow automatic lubrication Punching Pneumatic punches: 2 pieces MACHINE DETAILS Power supply: Three-phase Overall length: 15,000 mm Total width: 5,000 mm Total height: 2,000 mm Punching machine weight: 16 t Loader weight: 2.3 t EQUIPMENT - Automatic loader LKI L III 250, built in 2011 - Automatic unloader PR III - Noise protection hood - SICK photoelectric sensors - Original safety fences - Brush table - Automatic sheet repositioning - Air blow lubrication - Two pneumatic punches Further technical details according to the manufacturer - without guarantee Ram stroke: 31.9 mm Max. hole diameter: 114.3 mm Lsdpfswc S R Hsx Ab Ueah Punching frequency (X/Y direction) Stroke length: 8.0 mm – Pitch: 25.4 mm – Stroke frequency: 300 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 25.4 mm – Stroke rate: 375 / 375 strokes/min Stroke length: 4.5 mm – Pitch: 2.0 mm – Stroke rate: 600 / 600 strokes/min Tool turret Tool type: Amada Thick Turret Turret speed: 25 rpm Turret capacity: 58 stations (4 of which are auto-indexable) Accuracies Punching accuracy: ± 0.10 mm Positioning accuracy: ± 0.025 mm Repeat accuracy: ± 0.025 mm

Condition: ready for operation (used), Year of construction: 2001, operating hours: 62,433 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,250 mm, workpiece weight (max.): 200 kg, TECHNICAL DETAILS Control: Siemens Sinumerik 840 D Punching force: 220 kN Max. sheet thickness: 8 mm Max. Sheet thickness for stainless steel: 8 mm Max. Punching diameter: 76.2 mm Lsdpfxowcqf Ns Ab Uoah Working area and workpiece Working area: 2,585 x 1,250 mm Max. Workpiece weight: 200 kg Speed and precision Max. Speeds: 100 / 60 / 116 m/min Accuracy: 0.1 mm MACHINE DETAILS Operating hours: 62,433 h Length: 6,100 mm Width: 6,760 mm Height: 2,500 mm Weight: 13,000 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, workpiece weight (max.): 230 kg, TECHNICAL DETAILS Cutting force: 220 kN Working area: 3,085 x 1,650 mm Ljdpfx Abowcqfps Usah Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Control Control: Bosch Trumagraph CC 220 MACHINE DETAILS Machine weight: 13,800 kg Space required: approx. 7,900 x 6,300 x 2,200 mm Electrical specifications Mains connection: 400 V, 50 Hz Connection power: 19 kVA Supply voltage: 400 V Control voltage: 24 V Required fuse: 3 x 35 A Compressed air Compressed air connection: 6 bar

Condition: used, Year of construction: 2005, Used CNC punch press Finn-Power, type F6 SV, built in 2005 Press force: 300 kN Max. workpiece width: 4061 mm Max. workpiece length: 1528 mm Max. workpiece thickness: 8 mm Max. workpiece weight: 200 kg X/Y speed chuck: 80 m/min/60 m/min Turret head positions: 20 Turret head speed: 30 rpm Travel speed: 100 m/min Oil tank capacity: 330 l Max. operating pressure: 300 bar Lasdpfx Abowayzue Ueh Dimensions X/Y/Z: approx. 5900 mm, 6300 mm, 2500 mm Weight: approx. 13500 kg Control system: Siemens Sinumerik 840D The machine table has been extended. (Without machine housing)

Condition: used, Year of construction: 2019, functionality: fully functional, total height: 2,100 mm, total width: 9,000 mm, sheet thickness (max.): 6 mm, punching diameter: 105 mm, overall weight: 17,500 kg, table height: 900 mm, color: blue, power of feed motor: 20,000 W, Punching machine equipped with two independent tool stations with electrohydraulic heads and HiFocus 160i plasma unit from Kjellberg. The machine is characterized by: - automatic adjustment of the plasma torch height, - TRUMF quick tool change system - short changeover time; - X-axis movement range from 0 to 3000 mm, - Y-axis movement range 0d 0 to 1500 mm, - stepless adjustment of feed speeds, - possibility of nibbling, punching and embossing, - stepless adjustment of stroke height up to 90 mm, - tool punching up to 6 mm thick, - plasma torch cutting up to 12 mm thick, - easy programming. Available functions: - single hole, - row of holes, - circle of holes, - circle nibbling, - rectangular chipping, - matrix, - nibbling of cuts, - object rescaling, Lasdpfxswayilj Ab Ujh - contour program (in combination with Rotation station), - subroutines, - object repetition, - trimming, - hole-free zone, - ellipse, - V-belt, - mirror image, - waste removal. High-quality plasma cutting unit for structural steel, high-alloy steel and aluminum. Reduces the use of additional processing due to the appropriate cutting surface. Water-cooled PerCut 210 plasma torch with high heat dissipation efficiency and long nozzle durability thanks to the use of swirl gas technology.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, punching force: 30 t, Punching force: 30 tons Max sheet size: 3000x1500mm Turret: 20pos with 10pcs. 89mm station Multi-Tool 24/8 2 pcs. C index Lsdjv Rnqaepfx Ab Ueah 3 pcs. B index 2 pcs. D index Manufacturing year: 2011 Very good set of tools & tool holders included.

Condition: good (used), Year of construction: 2008, operating hours: 59,000 h, functionality: fully functional, punching force: 18 t, punching diameter: 76 mm, workpiece weight (max.): 150 kg, controller model: Bosch Typ 3, TECHNICAL DETAILS Working area: 2540 x 1270 mm Punching force: 18 t Ljdpfx Aov E N S Uob Ujah Max. sheet thickness: 6.4 mm Max. workpiece weight: 150 kg Max. punching diameter: 76.2 mm Control: Bosch Type 3 Positioning accuracy: 0.1 mm Speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous movement (X/Y): 108 m/min MACHINE DETAILS Machine dimensions (LxWxH): 5500 x 5900 x 2200 mm Machine weight: 11,400 kg EQUIPMENT - stable, easily accessible C-frame - coordinate guide for high-precision machining - linear magazine with 19 tool positions, 2 clamping claws - drives with maintenance-free Three-phase servo motors - Follow-up device with programmable hold-down - Ball tables - Part slide 180 x 200 mm - 2 good parts containers - Chip container - Automatic shutdown

Condition: ready for operation (used), Year of construction: 2010, operating hours: 57,504 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, AUTOMATION - SheetMaster - loading and unloading in parallel with main time - Toolmaster 70 - setting up in parallel with main time - GripMaster with scissor lift table - Good part conveyor TECHNICAL DETAILS Travel paths X / Y: 2500 / 1250 mm Sheet thickness: 8 mm Ledpfx Abevxi Suo Uoah Punching force: 220 kN Active hold-down clamps: 4.5 - 20 kN Workpiece weight: 200 kg Control: Siemens Sinumerik 840D  Part flap: 500 x 500 mm Speed X / Y / simultaneous: 100 / 60 / 116 m/min C-axis: 500 rpm Stroke sequence punching / marking: 1600 / 3000 1/min Position deviation Pa: ±0.1 mm Position spread Ps: ±0.03 mm Linear magazine: 21 tools with 3 clamps Tool change time for single tool / multi-tool: 3 / 0.3 s MACHINE DETAILS Space requirement: 6,760 x 6,100 mm Average power consumption: 9.5 kW Operating hours: 57,504 h EQUIPMENT - Stable, easily accessible C-frame - Moving ball roller tables - Linear magazine for tool stations and clamping clamps - Foot switch for clamp closing - Good parts container - Hydraulic single tool holder, 360° rotation - Manually adjustable holding down force - Programmable holding down device - active/passive/repositioning - Spray lubrication of punch - Punch slug extraction - Level monitoring for thread forming and tool lubrication - CE marking - Multi-beam light barriers - Quick shutdown of hydraulics - Bulge detection ADDITIONAL EQUIPMENT - Function MultiTool - MultiBend function - Thread forming function - Roller technology function - Marking - Multishear - Adaptive stroke calibration - Active die - Repositioning cylinder - Spray lubrication of die with level monitoring - Repositioning cylinder - Sensor for parts chute - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts

Condition: used, Year of construction: 2001, machine/vehicle number: 258116, Working hours machine: 36101 h Max. punching force: 200 kN Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg Standard configuration Traversing speed X/Y: 65 / 50 m/minAxis simultaneous: 82 m/min Position deviation: +/- 0.1 mm Number of turret stations: 31 of which AutoIndex stations: 3 (2 x B, 1 x C) Turret rotation speed: 25 1/min 2 Max. number of punching strokes: 520/min Machine frame: Bridge frame Press drive: hydraulic Drives turret + table drive: AC servo motors Laedpfx Abovmfzzs Uoh Clamping of clamping claws: pneumatic Electrical connection: 400V / 50Hz Electrical consumption machine: 30 kVA Compressed air consumption machine: 6 bar, 250 l/min  Extended machine accessories

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Sheet thickness: 8 mm Punching force: 220 kN Working area: 3,000 x 1,500 mm Control system: Siemens MACHINE DETAILS Machine weight: approx. 17,500 kg Lsdjvi Iw Rjpfx Ab Uoah EQUIPMENT - Scraper alternating position control - Thread forming - Marking - fast beading - Slotting - Multishear - Multibend - Offset resetting - Roller tools - Set-up cassettes - Ball transfer table

Condition: good (used), Year of construction: 1997, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 5820387, punching force: 30 t, total height: 2,000 mm, total width: 5,000 mm, total length: 15,000 mm, sheet thickness steel (max.): 8 mm, working range: 3,000 mm, type of input current: three-phase, travel distance X-axis: 2,500 mm, Amada VIPROS 358 KING + LKI L III 250 automatic loader + PR III automatic unloader + noise protection cover . It can work complete automatic , also sorting your parts on the pallet . The machine was verry well mentained , we bought this machine and did not finish installation because we bought a new machine . The machine has SICK light barriers and original protection fences . For more informations please contact me . CNC AMADAN 04 P-C N. 2 pneumatic punches Lasdpfxovb Dn Ae Ab Ujh Brush table for low noise operation & scratch free processing Device for automatic repositioning of the sheet metal Air Blow automatic tool lubrication

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, punching force: 28 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, punching diameter: 105 mm, throat depth: 1,500 mm, Equipment: safety light barrier, Color: RAL 5017 blue Configuration heads: Head 1: Standard (RevoTool or single tool) Head 2: Rotation (RevoTool or single tool) Lodpouu Ddgjfx Ab Ueah - X axis: 3000mm - Y axis: 1500mm - Labod control - 2 standard collets (clamping plate with gripper) - Repositioning device - Steel table with ball rollers - Punching slug extraction - Spraying device - Automatic gripper adjustment - HBL hydraulics - Vibration damper - Light barrier (included) - Set of keys and operating instructions Laser equipment: - IPG laser - Laser power: BLS 2000 (2 kW) - Powerful extraction system for the fiber laser - Automatic height adjustment of the laser head The punching machine is technically checked at Boschert and defective parts are replaced accordingly. We grant a factory guarantee of 6 months on punching machines that have been technically checked and offered by us. Commissioning, training and service can be offered at any time on request.

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Punching force (ton)22 Laodpfx Astltl Hsb Uoh Capable of taking multi tool Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999