BOCO PARDUBICE machines, s.r.o.

Year of construction: 2023, operating hours: 300 h, condition: excellent (used), functionality: fully functional, This robotic cell is used for tending an injection molding machine for insert molding. Fgsdez N Iq Eepfx Al Ajh

Year of construction: 2008, condition: ready for operation (used), This linear handing Krauss Maffei LRX150-MC5 was manufactured in 2008. It features an X-axis travel of 900 mm, Y-axis travel of 700 mm, and Z-axis travel of 2000 mm. The machine offers a versatile C-axis rotation of 0-180 degrees and an A-axis rotation of 0-270 degrees. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei LRX150-MC5 machine we have for sale. Contact us for further details. X-Achse: 900mmZ-Achse: 2000mmY-Achse: 700/700mm Teleskop C-Achse: 0-180 Grad stufenlos A-Achse: 0-270 Grad stufenlos 8 digitale Eingänge / 8 digitale Ausgänge Fedpfx Alez N A Hzo Aegh

Condition: used, Krauss-Maffei Door Foaming Carousel (Unused), Wet Box System, Fixture Dimensions Length x Width x Height 2300/950/200mm, Cycle Time 12 Seconds, 24 Foaming Fixtures, 2 x Mixing Heads, Mould Change Over/Storage System, ABBiRB 6700 Loading & Unloading Location: These lots are located in Porcia, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Fgsdpfx Aoz I S Dfsl Aeh

Year of construction: 2022, condition: ready for operation (used), overall weight: 1,140 kg, Plastic processing machine manufactured in 2022. This Other AMIS GSE 300/600 features a rotor diameter of 300 mm and a rotor width of 600 mm, designed for high-speed recycling of plastic waste. It has a feed opening of 400 x 590 mm and a throughput rate of approximately 150 – 250 kg/h, depending on material type. If you are looking to get high-quality plastic recycling capabilities, consider the Other AMIS GSE 300/600 machine we have for sale. Contact us for further details. Fodpfx Aloz E R Rxe Aogh • Rotor diameter: 300 mm • Rotor width: 600 mm (actual cutting length: 590 mm) • Drive capacity (motor): 11 kW or 15 kW (depending on application) • Feed opening: 400 x 590 mm • Throughput rate: Approx. 150–250 kg/h (material and screen size dependent) • Rotor knives: 3 rows, V-cut geometry (3 x 2 segmented knives) • Stator knives: 2 rows, reversible with dual cutting edges • Standard screen mesh: > 6 mm (interchangeable; multiple sizes available)

Year of construction: 2006, condition: ready for operation (used), screw diameter: 130 mm, Single-screw extruder manufactured in 2005. This TECNOVA ES130/37D DEG features a screw diameter of Ø 130 mm and an L/D ratio of 37:1. It includes a powerful main motor rated at 246 HP and a degassing system for enhanced processing. The barrel temperature control offers individually controlled heating and cooling zones, ensuring optimal performance. If you are looking to get high-quality plastic processing capabilities, consider the TECNOVA ES130/37D DEG machine we have for sale. Contact us for further details. • L/D ratio: 37:1* • Main motor power: 246 HP (approx. 181 kW) • Degassing system: Yes • Barrel temperature control: Individually controlled heating and cooling zones • Barrel cooling: Forced-air cooling with fans • Barrel heating capacity: approx. 110.6 kW total • Electrical supply: 380 V / 50 Hz / 3-phase • Main electrical rating: 630 A • Control voltage: 110 V Fgedpfxez Az Ace Al Ajh • Electrical cabinet protection: IP44 • Extruder length: approx. 4,635 mm Additional equipment • Vacuum pump (included)

Condition: excellent (used), functionality: fully functional, Good working condition washing line with Weima shredder WLK1500 and Rotajet dryer and 2 sink float tanks Output capacity 750kg p/h Fedpoz Azz Ejfx Al Aegh

Year of construction: 2021, condition: used, overall weight: 27 kg, terms of delivery: FCA Pegnitz Fgedoz Ali Hspfx Al Ash delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 2026, condition: new, The Vacuum Auto Loader is designed for the automatic conveying of plastic granules and powdered materials to drying hoppers, extruders, injection molding machines, and other processing equipment. Technical Specifications Model 300G • Vacuum pressure: 10,000 Pa • Air flow: 1 m³/min • Motor power: 1.1 kW • Motor speed: 2800 rpm • Power supply: 380 V, 3-phase, 50 Hz • Conveying capacity: 100 kg/h • Material hose diameter: 50 mm • Suction hose diameter: 60 mm • Conveying method: Vacuum suction Fodpfxjzvzf Ro Al Aogh Model 800G • Vacuum pressure: 10,000 Pa • Air flow: 3 m³/min • Motor power: 3.0 kW • Motor speed: 2800 rpm • Power supply: 380 V, 3-phase, 50 Hz • Conveying capacity: 300 kg/h • Material hose diameter: 50 mm • Suction hose diameter: 60 mm • Conveying method: Vacuum suction

Condition: good (used), Year of construction: 2018, Equipment: documentation/manual, MAAG M-USG 600 H – PET Pelletizing Line, 6,500 kg/h – 2018 MAAG Automatik M-USG 600 H pelletizing line, manufactured in 2018, designed as an underwater strand pelletizing system for the continuous production of polymer pellets and originally used for PET. The line integrates automatic strand feeding and cutting, water cooling, hydraulic conveying, centrifugal drying and pellet classification, with an approximate nominal capacity of 5,300 kg/h and a maximum design capacity of up to 6,500 kg/h. Equipped with an 80-strand die head, automatic feeding system and strand pelletizer/cutter, hydraulic conveying system, MAAG CENTRO 1600 centrifugal dryer, exhaust fan, VIBRA Schultheis SRK 15/7.5-I-V-S vibrating screen, and control system with Siemens SIMATIC HMI. Fsdpezvc R Uofx Al Asgh Predominantly stainless-steel construction in the areas in contact with the product and process water. Suitable for PET pellet production and potentially for recycled PET (rPET) pelletizing applications, subject to process configuration and material characteristics. Two identical lines available, fitted with MAAG CENTRO 1600 dryers, machine numbers CE-0468 and CE-0469.

Condition: ready for operation (used), A plastic laser sintering unit is available. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1500mm, weight: approx. 300kg. An on-site inspection is possible. Fgedpfoztxz Rjx Al Aoh

Condition: used, Transport platform K140 1-82745500 €329 Weight per unit: 21 kg 4 swivel shackles €1,291 1774874610 Weight per unit: 2.35 kg The invoice can be found in the documents! Fjdpjztw Iisfx Al Aogh

Year of construction: 2025, condition: new, functionality: fully functional, Equipment: CE marking, ROTARY PYROLYSIS FURNACE FOR TIRES OR PLASTICS, 4-TON CAPACITY PER BATCH, BRAND NEW, NEVER USED, WITH PYROLYSIS OIL BURNERS, SOFTWARE-CONTROLLED, TIRE LOADING SYSTEM AVAILABLE. ALSO AVAILABLE: 10 KG TEST PYROLYSIS FURNACE FOR CONVERTING TIRES AND PLASTIC MATERIALS INTO PYROLYSIS OIL. ALSO AVAILABLE: MINI REFINERY FOR CONVERTING PYROLYSIS OIL INTO DIESEL, 10 KG CAPACITY. ALSO PRODUCES BLACK CARBON AND RECYCLES STEEL. Fgsdpfozmlqljx Al Aoh AVAILABLE FOR VIEWING BY APPOINTMENT IN BORDEAUX, FRANCE.

Condition: new, Year of construction: 2022, TITTAL Filter fan SK3323 100 Fgodpfx Alszl S Sae Aeh Year of manufacture approx. 2019

Year of construction: 2022, condition: new, functionality: fully functional, Littelfuse fuse The fuses are designed for a voltage of 250 VAC. Fsdpfx Aezl R Exsl Aegh 10 pieces – price €5

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Powder extraction hood Fedpfxezhvyaj Al Aegh The Interflow powder extraction hood protects the user from solid contaminants that may be released during various operations. Due to its robustness and reliability, the unit requires a minimum amount of maintenance. Furthermore, the unit has a sturdy appearance and optimal ease of operation. Specifically, for example, during weighing operations, you can continuously adjust the air velocity from the touchscreen control panel, ensuring that the airflow does not affect the weighing process. The operation of the powder extraction hood is based on the principle that air is extracted from the work area through a pre-filter installed in the back panel. This creates a horizontal airflow from the user towards the back panel. All airborne particles are carried along in the airflow and cannot therefore be released uncontrollably into the environment. The airflow is filtered through an easily replaceable pre-filter and an absolute filter and then returned to the surrounding area. Specifications: Made of high-quality HPL material Smooth finish both inside and out Custom solutions possible Installation and validation on-site Complies with all laws and regulations Fail-safe design Hermetic sealing Dimensions: 1838 × 610 × 600 mm, ESD tested, filter tested

Condition: used, Year of construction: 2001, machine/vehicle number: 21012101, functionality: fully functional, operating hours: 49,849 h, input voltage: 415 V, input current: 36 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 2,250 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 1,000 mm, workpiece weight (max.): 420 kg, number of axes: 5, number of slots in tool magazine: 10, controller manufacturer: Siemens, actuation type: electric, total height: 4,000 mm, total length: 7,300 mm, total width: 7,000 mm, table length: 2,250 mm, table width: 1,500 mm, control voltage: 24 V, 5-axis CNC machining center for wood or plastic. The machine was used for contour milling of plastic components. It is equipped with an HSD spindle, and the tool holder is of the HSK63 type. The machine can be purchased with or without an extraction system, depending on the intended application. The dimensions specified for the machine include the extraction system. Fodezhtpfjpfx Al Aegh An inspection of the machine is possible at any time; it is currently still in production.

Condition: good (used), 3DGENCE Fjdjzg Tzlspfx Al Aegh Type: Industry F420 Year of manufacture: 2021 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with automatic cleaning system Filament diameter: 1.75 mm Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic swapping system Print head temperature (max.): 500°C Heated bed temperature (max.): 180°C Build chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Year of construction: 2024, condition: ready for operation (used), Glazing bead saw manufactured in 2024. This ROTOX GLA 401 features simultaneous cutting of 4 glazing beads at 45° and milling of fixing holes. It includes pneumatic material clamping and an electric locking machine cover for enhanced safety. The machine accommodates PVC profiles with a maximum section of 375 × 45 mm and offers a cutting length of up to 260 mm with a length stop. If you are looking to get high-quality cutting capabilities, consider the ROTOX GLA 401 machine we have for sale. Contact us for further details. • Function: Simultaneous cutting of 4 glazing beads (45°) and milling of fixing holes • Pneumatic material clamping: Yes • Pneumatic pressure: 2 bar Fgodpozg Igpsfx Al Ash • Pneumatic pressure gauge with filter: Yes • Electric locking of machine cover: Yes • Clamping plates: Tool-free • PVC profile section capacity: Min 50 × 50 mm; Max 375 × 45 mm • Cutting length: 200 mm (without length stop); 260 mm (with length stop) • Electrical connection: 400 V / 50 Hz • Installed power: 1.1 kW • Profile list: Available • Operating instructions: English • Machine inscription: Italian • Attachment side: Right

Condition: excellent (used), Fill 3D Ultrasonic Cutter Here we offer a Fill 3D ultrasonic cutting system. FILL 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour cutting of fiber-reinforced plastics using ultrasound-actuated cutting systems. Your advantages: Ergonomic loading and unloading Simple creation of cutting programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic cutter with low space requirements and simple kinematics. The Siemens CNC 840 D control system allows the cutting device to be programmed like a machine tool. Tool corrections or path changes can be easily carried out directly on the machine. As standard, the machine is equipped with a 20 kHz ultrasonic cutting unit. However, it can also be equipped with alternative systems. The cutter is equipped with a separate rotary axis to allow cutting of tight radii and to save other axis movements (5 + 1 axes). Technical data: Machine data Part length max. 1,000 mm Part width max. 900 mm Part height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control Siemens Sinumerik 840D sl Technical data overall system: Fill 5-axis guided CFRP cutting system Type: SM - 03 Electricity: Supply voltage: 3 x 400 V AC Supply frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3,920 mm Width: approx. 3,400 mm Height: approx. 3,500 mm Weight: Total weight: approx. 1,500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Fgsdjzdy Iaepfx Al Aeh Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Type: Fill 5-axis guided CFRP cutting system Type: SM - 03 Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, Feller hot runner controller, 70-channel. Prepared for expansion to 80 channels! In excellent condition, sourced from a cleanroom injection molding facility in the medical technology sector. Fgodpfx Alezdu Hqs Ash The original new price was over €20,000.

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Fgedpfjzdiz Nox Al Aoh Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.

Year of construction: 2026, condition: new, functionality: fully functional, IG BAG DISCHARGING STATION Industrial system designed for the safe and efficient emptying of bags and Big Bags containing bulk materials and powders. Main Features: Heavy-duty steel frame construction Adjustable material vacuum system 4 pneumatic cylinders for complete bag emptying Safety access door for bag opening and handling Integrated collection hopper Suitable for powders, granules, and bulk materials Easy maintenance and cleaning Applications: Suitable for: Food industry Chemical industry Plastics industry Pharmaceutical industry Feed and pet food industry Powder and bulk material handling Approximate Dimensions: Fgsdpfxoy Ubu Ss Al Ajh Structure footprint: approx. 1400 x 1400 mm Total height: approx. 3200 mm Custom solutions are available according to material type and production requirements. Contact us for further information, technical specifications, or a customized quotation.

Year of construction: 2021, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: PROJECT NO : 21 P 10 082 00, In December 2021, we installed an electric oven for EPP products. Unfortunately, the business with that particular customer did not work out. Fgsdpfx Aloy E R Ucj Aeh Beautiful electric oven (December 2021) which has never been used. 125,000 + 12,375 + 39,150 = €176,525 This was the price for the oven and trolleys. Please have a look at the attached pictures and documents. I can assure you everything is still in brand new condition.

Condition: ready for operation (used), An inkjet-based industrial PolyJet/material jetting 3D printer Keyence for photopolymers is available. Build volume dimensions X/Y/Z: 297mm/210mm/200mm, resolution: 635dpi/400dpi, XY resolution: 63.5µm/40µm, layer thickness range: 15µm-30µm, machine dimensions X/Y/Z: approx. 950mm/700mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Fsdpfx Aloy Anunj Asgh

Condition: good (used), Manufacturer: Mil-tek Model: 205 TS Machine type: Plastic press / Film press Operating pressure: 8 bar Test pressure: 11 bar Fgodpfx Aleyx Skrs Ajh Material container: 20 l Drive: pneumatic CE marking: present Quantity: 4