Unosand Ltd.

Condition: good (used), Aging/brushing machine Houfek Twingo 300 Redpfey Ifqkjx Aa Dot Working width: 300 mm, Max height: 340 mm, 2 upper brushing units, 2 vertical units, Feed with frequency inverter control, Unit speeds controlled by frequency inverter, Brushes shown on the pallet are included with the machine, Good condition, fully operational, ready for work.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1503, working width: 1,000 mm, workpiece height (max.): 100 mm, workpiece width (max.): 800 mm, workpiece length (max.): 4,000 mm, TECHNICAL DETAILS Working width: 1,000 mm Brushes: Fladder grit 100 Maximum workpiece width: 800 mm Maximum workpiece height: 100 mm Maximum workpiece length: 4,000 mm MACHINE DETAILS Voltage: 3 × 400 V Frequency: 50 Hz Current: 50 A Protection class: IP54 Rjdpfx Asyx Hrdja Det EQUIPMENT Vacuum conveyor belt Vacuum pump Additional brush set, grit 100

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. Rodpfx Aasyw Rqzo Djt - Upper cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Lower cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Max working width mm 2000

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. - Top cleaning system (motorized rubbered cross belt with brushes) Redpfxjyw Rqhs Aa Dst Motor power: Kw 0.75 - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.75 - Upper (top) section lifting motor: 0.25 kW - Max working width mm 1300 ca. - Built-in control panel

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. - Upper cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Lower cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 Redpfx Aasyw Rpqo Dst - Max working width mm 1500 ca.

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. To be positioned on a motorised roller conveyor following a drilling machine, a double-sided edge bander or double-end tenoner - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 Rsdpfxeyw Rnyo Aa Det - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 - Max useful working width mm 3500

Condition: excellent (used), CATALOGUE NUMBER 7928 TECHNICAL DATA - Max. workpiece height: 120 mm - Max. workpiece width: 1900 mm - Top unit with 6 brushes - Unit adjustable up/down - Oscillating unit - Rotating star-shaped sanding unit arrangement - Infinitely adjustable brush speed via inverter - Infinitely adjustable feed, rotation, and oscillation speeds - Main motor: 7.5 kW - Vacuum table - Two vacuum pumps: 2×7.5 kW - Pump dimensions: 1100x800x940 mm - Extraction port diameter: 4x150 mm, 4x200 mm - Overall machine dimensions (L/W/H): 2850x2100x2400 mm - Weight approx. 2500 kg ADVANTAGES – Two vacuum pumps – With oscillation – Rotating aggregate Redpfx Aajyu Tmls Det – German-made – Unpainted – Original DTR documentation – Used sander, very good condition Net price: 45,900 PLN Net price: 10,900 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: like new (used), Working width 600 mm Rsdpfx Asytp Tfea Dot Two brushing rollers Two 4 kW motors Infinitely variable feed speed Roller height adjustment (up/down) Power supply 400V 650 kg Year of manufacture: 2021

Condition: used, Year of construction: 2008, total length: 2,800 mm, total width: 800 mm, total height: 1,600 mm, Empty weight: 500 kg - Year: 2008 - Documentation available: No - CE certificate present: No - Serial number: 1917295 - Min. working width [mm]: 400 Redpfsytfr Rsx Aa Dot - Max. working width [mm]: 1630 - Max. passage height [mm]: 100 - Voltage [V]: 400 - Current consumption [A]: 16 - Fuse [A]: 20 - Power [kW]: 5.2 - Transport dimensions: 2800mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Type 1000-2S metal Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Metal shaft 7.5KW Grinding motor 2.2KW Feed motor 1.5 kW Lifting motor 0.37KW Total motor power 11,57 kW Transport dimensions 1600x1650x1450mm Weight 750 kg Redpfx Aoyqx Dbsa Dot Price 6700 Eur (EXW Jonava, Lithuania)

Condition: ready for operation (used), Year of construction: 1977, A roller wide belt brushing machine Tilleke is available. Working width: 700mm, Machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, Weight: approx. 750kg. An on-site inspection is possible. Rodpfxsynltqe Aa Det

Condition: like new (used), functionality: fully functional, power: 3 kW (4.08 HP), High-Gloss Polishing Machine / Polishing Stand Manufacturer: Bauerrichter Model: PM 88 This machine comes from a kitchen manufacturer and was used for, among other things, high-gloss fronts. The ultimate solution for stationary polishing! Rodpfx Aeym Atroa Dst Motor approx. 3 kW, 230/400V Polishing shaft height / working height approx. 900 mm Polishing ring diameter max. 450 mm Usable polishing width 140 mm Storage table for e.g. polishing agents, tools... approx. 350 x 350 mm Execution - Stable, welded steel construction with mounting flange for floor fastening - One continuous polishing shaft, with polishing rings mounted on both right and left sides - Integrated storage table for polishing materials - Cover/protective hoods over the polishing rings Dimensions approx. 1600 x 1000 x 1200 mm (LxWxH) Weight approx. 400 kg Including brand-new pleated polishing mop set

Condition: good (used), QUICK WOOD RO800 structuring brush machine or intermediate sanding machine Working width 700 mm, working height 200 mm 2x4 special brushes Brush rotation speed control Redpfx Aeyk H Easa Det Rotation speed control for the 2 blocks of 4 brushes each Feed speed adjustment Electric adjustment of the spacing of the 2 conveyor belts Electric raising and lowering of the brushes

Condition: excellent (used), Year of construction: 2014, Polishing Machine for Furniture Fronts – Emme Elle Model 1350 For sale: Industrial polishing and buffing machine by Emme Elle, model 1350, ideal for furniture manufacturing plants, joineries, and spray shops. The machine is designed for the automatic processing and finishing of furniture fronts, lacquered panels, polyurethane coatings, and other surfaces, ensuring a smooth, even, and high-quality finish. — 📌 Key Product Features • Manufacturer: Emme Elle – a renowned brand in the Italian and European woodworking machinery sector. • Model: 1350 – working width up to 1350 mm, ideal for furniture fronts and large panels. • Condition: negotiable (used, in working order) – detailed information available upon request. • CE compliance: yes. — 🛠️ Technical Specifications • Working width: approx. 1350 mm – suitable for wide fronts and panels. • Table dimensions: approx. 1350 × 3200 mm. • Polishing components: – 4 rotating shafts with Ø 350 mm cotton discs, Rodpfxsyk Dfwo Aa Dot – 4 polishing drums Ø 180 mm. • Wax distribution system: automatic module for the application of polish/wax compound. • Motors: multimotor configuration ensuring power and stable operation. • Suction/de-dusting system: efficient extraction unit for dust and debris, improving finish quality. — ✅ Applications The machine is dedicated to polishing and finishing furniture fronts, lacquered and veneered panels in production lines. Suitable for: • joinery and furniture manufacturing plants, • spray shops and finishing departments, • serial production as well as individual elements. It ensures uniform, high-quality surface finishes, reducing operator time and increasing production efficiency.

Condition: good (used), Year of construction: 2007, functionality: fully functional, The Italmeccanica MacPower 6TE/480/1600 is an industrial brushing machine / surface processing line for panels and sheet elements (e.g., MDF, chipboard, wood). The unit is designed for brushing, structuring, and finishing panel surfaces in woodworking and furniture manufacturing processes. Main features and parameters (typical for the MacPower series): Redoykzigspfx Aa Dst • Working width: approx. 1600 mm • Multi-head brushing system (longitudinal and transverse brush groups) • Capable of processing both surfaces and panel edges • Designed for continuous operation in production lines • Robust industrial build, high efficiency, and consistent processing quality • Industrial 3-phase power supply • Typical applications: surface structuring, finishing of furniture panels, door components, wood-based boards The MecPower/MacPower series by Italmeccanica is used in industrial panel brushing lines. Machines are often equipped with multiple brush groups and a working width of 1600 mm, allowing the processing of large sheet elements. Italmeccanica MacPower 6TE/480/1600 Machine type: brushing / structure sanding machine for panels Manufacturer: Italmeccanica (Italy) 🔧 Working data • Working width: 1600 mm • Material pass-through height: approx. 130 mm (typical for the series) • Minimum piece length: approx. 400 mm • Number of working units: 6 • Top units: 2 • Side units: 3 • Longitudinal/transverse units: combination of longitudinal and transverse brushes • Edge processing: yes • Rollers/brushes: multizone horizontal and transverse brushes ⚡ Electrical data • Installed power: approx. 11–17 kW (depending on configuration) • Power supply: 3-phase 400 V, 50 Hz • Extraction system: dust extraction ports on the working units 📏 Dimensions and weight (typical for 1600 version) • Length: approx. 3300 mm • Width: approx. 2450 mm • Height: approx. 2250 mm • Weight: approx. 1500–3000 kg (depending on equipment)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KR 500, total length: 2,650 mm, total width: 1,800 mm, total height: 1,780 mm, overall weight: 1,700 kg, power: 6.25 kW (8.50 HP), warranty duration: 12 months, workpiece height (max.): 80 mm, workpiece width (max.): 1,000 mm, workpiece length (max.): 9,999 mm, KAMA Buerstenschleifmaschine KF FZM 1006 Flexa, Baujahr 2026, Lieferung ab Werk Die KR FZM 1006 Flexa Bürstenschleifmaschine wurde für das Roh- und Grundierschleifen von rustikalen und CNC-gefrästen Oberflächen entwickelt und erzielt mit ihrer flexiblen Schleiffunktion auch auf schwierigsten Oberflächen erfolgreiche Ergebnisse. Scheibenbuerstenschleifeinheit, bestehend aus 8 asymetrisch angeordneten Buersten. Position und Drehzahl stufenlos einstellbar. Kreuzbuerstenschleifeinheit, bestehend aus 2 Buersten, die sich in entgegengesetze Richtungen drehen. Druck und Drehzahl stufenlos einstellbar. Zylindrische Buerstenschleifeinheit, bestehend aus zwei zylindrischen Buersten, die sich in entgegengesetzte Richtungen drehen. Druck und Drehzahl stufenlos einstellbar. Rodpfeyh E Sdsx Aa Dst Schleifpapierkoernung 40 - 600 Lieferzeit: 4 Wochen

Condition: new, Sarmax CHEYENNE SP2 600 Brush Aging Machine Working width: 600 mm Redeyf Dclspfx Aa Dst Maximum working height: 300 mm Transport belt with adjustable speed: 3–15 m/min Includes: steel brush + tynex brush Total power: 9 kW Technical documentation CE certificate Brand new machine available on order

Condition: new, functionality: fully functional, Aging brush machine Sarmax CHEYENNE SP2 400 working width 400 mm maximum working height 300 mm conveyor belt with adjustable speed 3–15 m/min includes steel brush and tynex brush Total power 7 kW technical documentation CE certificate Rsdpfsyf Av Rex Aa Dot Brand new machine available on order

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, brushing unit diameter: 450 mm, total length: 2,300 mm, total width: 2,200 mm, total height: 2,000 mm, height adjustment type: mechanical, overall weight: 850 kg, extraction nozzle diameter: 80 mm, grinding width: 1,200 mm, ITALMECCANICA Polywood Brush Sander – fully serviced, ready for operation Specification: • Condition – used, fully serviced and calibrated • Manufacturer – ITALMECCANICA • Model – Polywood • Working width – 1200 mm • 4 sanding units: - two side brushes for edge sanding with adjustable angle setting - traversing cross brush (left-right movement) - large cross brush spanning full conveyor width, dia. 450 mm • Brushes with interchangeable strips • Stepless feed speed adjustment – variator • Stepless brush speed adjustment – frequency inverters • Original paintwork • Extraction ports dia. 80 mm • Weight – 850 kg • Year of manufacture – 2003 • CE compliant • Overall dimensions: 230 x 220 x 200 cm (L x W x H) Additional information: Rsdpfoyfcrxox Aa Det • Excellent, factory-level technical and visual condition • The photographs show the actual item offered for sale • Machine can be powered up and inspected on site • Listing price excludes VAT and transport costs Financing and transport: • We organise delivery via our own MDD fleet, courier services, or third-party carriers • Financing available by lease or lease loan

Condition: new, Year of construction: 2026, For sale: a robust, professional brushing machine Kusing K2L-600e with electric lift and digital tool-height adjustment. It is the heaviest brushing machine in its category – it withstands any vibrations even when removing material more aggressively. The machine is designed for intensive daily use, ideal for wooden-floor manufacturers or other operations where brushing is required every day. Main advantages: • Absolute stability: a massive construction prevents vibrations even under heavy material removal. • Precise tool-height adjustment: digital lift with accuracy to tenths of a millimeter. • Long service life and reliability: built from durable materials, engineered for harsh operating conditions. • Easy operation: intuitive control of speed, RPM, and lift, with minimal maintenance. ––– Technical specifications • Main motor power: 4 – 5.5 – 7.5 kW (adjustable as needed) • Feed motor power: 0.75 kW • Lift motor power: 2 × 0.37 kW • Feeding speed: 2 – 12 m/min (adjusted via a frequency inverter) • Shaft length: 600 mm • Shaft diameter: 40 mm Rjdsx Utudspfx Aa Dst • Conveyor belt width: 600 mm • Machine weight: 950 kg

Condition: new, Year of construction: 2026, I am selling this basic, easy-to-use brushing machine from the K1S-400 / K2S-400 model line. It is ideal for companies that are just starting with brushing or are looking for a low-maintenance machine to streamline their brushing process. This machine is well suited for sawmill operations that need to brush cladding or boards to enhance the material’s value. Main Advantages: • Easy Operation: Requires only basic maintenance. • Low Initial Investment: Minimal upfront costs. • Long Service Life and Reliability: Built from durable materials and engineered for harsh operating conditions. Technical Specifications • Main Motor Power: 3–4 kW (adjustable as needed) Rjdpex Utt Tefx Aa Dot • Shaft Length: 400 mm • Shaft Diameter: 40 mm • Tool Diameter: 250 mm • Machine Weight: 350 kg

Condition: new, Year of construction: 2026, I am selling this basic, easy-to-use brushing machine from the K1S-400 / K2S-400 model line. It is ideal for companies that are just starting with brushing or are looking for a low-maintenance machine to streamline their brushing process. This machine is well suited for sawmill operations that need to brush cladding or boards to enhance the material’s value. Main Advantages: • Easy Operation: Requires only basic maintenance. • Low Initial Investment: Minimal upfront costs. Rjdpjx Utttofx Aa Djt • Long Service Life and Reliability: Built from durable materials and engineered for harsh operating conditions. Technical Specifications • Main Motor Power: 3–4 kW (adjustable as needed) • Shaft Length: 400 mm • Shaft Diameter: 40 mm • Tool Diameter: 250 mm • Machine Weight: 350 kg

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 177, SECOND-HAND BRUSHING MACHINE CAMAM MOD. CAM - CE RULES Rodpfox Rn Tyox Aa Dot - S/N 177 - Year 2000

Condition: new, Year of construction: 2025, Working width: 600 mm Working height: 300 mm Minimum workpiece length: 250 mm Redpfjxwnilsx Aa Dst Units: 2 brush units, centrally adjustable electrically with fine offset adjustment 1st brush: Metal brush, diameter 210 mm 2nd brush: Tynex brush, grit 80, diameter 210 mm Height adjustment: electric Height display: mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 4 kW Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 centrally electrically adjustable brush units with fine offset adjustment Rodpfx Aajxwnifo Det 1st brush: Metal brush, diameter 210 mm 2nd brush: Tynex brush, grit 80, diameter 210 mm Height adjustment: electric Height display: mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW Feed motor power: 0.37 kW Machine length: Machine width: Weight: