Wds

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 2,768 h, load capacity: 1,400 kg, lifting height: 5,220 mm, free lift: 1,845 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load centre: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Refurbished without warranty Dwedpfex Ennmsx Ab Tof Technical condition: Very good Front tyre type: Superelastic Front tyre size: brand new Front tyre condition: New Rear tyre type: Superelastic Rear tyre size: brand new Rear tyre condition: New Battery voltage: 48V Battery capacity: 625Ah Battery type: PzS Battery year: 2019 Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Side shifter, third valve, rear working light, front working light, roof cover, front windscreen, half-cab, safety light, beacon, windscreen wiper,

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,218 h, load capacity: 3,500 kg, lifting height: 5,380 mm, free lift: 1,690 mm, fuel type: electric, mast type: triplex, construction height: 2,600 mm, fork carriage width: 1,400 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Refurbished, without warranty Technical condition: Very good Front tires type: Non-marking Front tires condition: 80 - 100% Rear tires type: Non-marking Rear tires condition: 80 - 100% Battery voltage: 80V Dedpox Enngsfx Ab Tewf Battery capacity: 930Ah Battery manufacturer: tested with 94% residual capacity Battery type: PzS Battery year: 2019 Battery condition: 80 - 100% Description: Overhauled, serviced, and inspected in accordance with FEM 4.004 (UVV). Completely repaired, serviced, and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, road legal (STVZO), full cabin, non-marking tires, joystick, LED lighting.

Condition: used, mileage: 311,810 km, power: 390 kW (530.25 HP), first registration: 05/2020, fuel type: diesel, maximum load weight: 17,375 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 2,650 mm, brakes: retarder, color: silver, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: air conditioning, all wheel drive, cruise control, parking heater, This offer is non-binding. Errors and prior sale are reserved. If a foreign currency is specified, it is based on the current daily exchange rate. The currency of the vehicle location is valid. Waste heat utilization, OM471 engine, inline 6, 12.8 l, 390 kW (530 HP), 2600 Nm, High Performance Engine Brake, axle configuration 6x2/4 VLA 22.5, Predictive Powertrain Control, front axle 8.0 t, rear axle 13 t, lift axle, 7.5 t, steered, liftable, cab suspension, comfort, air-suspended, air suspension, rear axle, axle load measuring system, light alloy wheels, secondary water retarder, 450 l aluminum tank, 30 l AdBlue tank, fifth wheel height H = 150 mm, L cab, cab width 2.30 m, StreamSpace, exterior transparent sun visor, LED daytime running lights, interactive multimedia cockpit, refrigerator in pull-out drawer under the bed, automatic climate control, auxiliary hot-water heater, comfort driver's air-suspended seat, rain sensor, Bi-Xenon headlights, automatic main/dipped beam and cornering lights, fog lights, LED tail lights, lane keeping assist, distance control assist, attention assist, traffic sign assist, driver's airbag, cruise control, 68t GVW, steered and liftable lift axle. Dwodpfxex Ennao Ab Tof

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 5,574 h, load capacity: 5,000 kg, lifting height: 4,150 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,970 mm, fork carriage width: 1,350 mm, fork length: 2,400 mm, drive type: Diesel, construction width: 1,350 mm, Diesel forklift Load center: 500 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Dual pedal Speed class: 20 Condition: Refurbished, without warranty Technical condition: Good Front tires type: Superelastic Front tires size: 355/65-15 Front tires condition: 40 - 60% Rear tires type: Superelastic Rear tires size: 250-15 Rear tires condition: 60 - 80% Description: Handover with new FEM 4.004 inspection including inspection book. For further questions, please feel free to call us. In addition to this model, we also have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to provide offers for leasing & financing as well as delivery at attractive rates. Trade-in of Linde equipment is also possible – even if you do not purchase a machine from us. The operating hours shown were recorded at the time of listing. Subject to prior sale, changes, and errors. Side shifter, fork positioner, Durwen RZV45GS, fork positioner with side shift 3rd valve, 4th valve, rear working lights, front working lights, heater, road approval (STVZO), full cab, air conditioning, seat heating, LED, Dodpfxex Enm Ns Ab Tewf Comfort seat: active fabric, air suspension and seat heating, seat ventilation, pre-dust separator, clipboard with LED, beacon.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,527 h, load capacity: 3,000 kg, lifting height: 5,350 mm, free lift: 1,645 mm, fuel type: gas, mast type: triplex, construction height: 2,440 mm, fork carriage width: 1,150 mm, fork length: 1,150 mm, drive type: Treibgas, LPG forklift Load center: 500 Dodpfox Enm Ajx Ab Tjwf ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Double pedal Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Superelastic Front tire size: 27x10-12 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 23x9-10 Rear tire condition: 40 - 60% Description: Handover with new FEM 4.004 inspection including inspection book. If you have any further questions, feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We can also provide leasing & financing as well as delivery at favorable conditions upon request. Trade-in of Linde equipment is also possible – even if you do not purchase a device from us. Operating hours stated are as of the listing date. Subject to prior sale, modifications, and errors. Clamp fork, sideshift, fork positioner, Durwen fork positioner with independent sideshift 3rd valve, 4th valve, rear work light, front work light, heater, road homologation (STVZO), full cabin, full free lift, safety light,

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 10,127 h, load capacity: 3,000 kg, lifting height: 6,455 mm, free lift: 2,074 mm, fuel type: gas, mast type: triplex, construction height: 2,841 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, LPG Forklift Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Transmission: Double Pedal Condition: Ready for use and fully functional Technical Condition: Good Front Tires Type: Super Elastic Front Tires Size: 27x10-12 Front Tires Condition: 80 - 100% Rear Tires Type: Super Elastic Rear Tires Size: 23x9-10 NEW Rear Tires Condition: 80 - 100% Dedpfxox Enmvj Ab Tewf Description: Delivered with a new FEM 4.004 inspection including inspection booklet. If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to discuss leasing & financing as well as delivery at favorable conditions. Linde equipment can also be traded in – even without purchasing it from us. Reported operating hours were read as of the date listed. Subject to prior sale, changes and errors excepted. Fork clamp, sideshift, fork positioner, Durwen fork clamp with separate sideshift 3rd valve, 4th valve, rear work light, front work light, heating, German Road Traffic Licensing Regulations (StVZO), full cab, full free lift, safety light,

Condition: new, power: 103 kW (140.04 HP), number of beds: 2, number of seats: 4, fuel type: diesel, gearing type: automatic, color: grey, total length: 599 mm, total width: 2,050 mm, total height: 2,650 mm, overall weight: 3,500 kg, Equipment: onboard kitchen, Forster Van 599 HB – Model Year 2026 Vehicle expected to be available from early April 2026 Photos will be provided as soon as the vehicle arrives on our premises Chassis: • Fiat chassis • 140 hp engine • Fiat automatic transmission Travel-Line Package: • Electrically folding exterior mirrors • Rear parking sensors • Radio pre-installation DAB • DAB antenna • Steering wheel controls • Cab blackout blinds • Mosquito screen door • Midi-Heki rooflight • Electric entry step • Foldable table extension Comfort-Line Package: • Adaptive cruise control (ACC) with Stop & Go • Lane keeping assist • Traffic jam assist • Automatic climate control • Inductive charging station • Digital cockpit • Leather steering wheel Dwodpfx Aex Enmieb Tof • 16" diamond-black alloy wheels • Painted front bumper • Fog lights • Rain and light sensors • Electric parking brake Optional Equipment: • Pioneer DAB radio • Exterior paint: Lanzarote • Waste water tank, insulated and heated • Awning • Truma Combi D4 diesel heater Including gas inspection certificate, vehicle documents, and TÜV (roadworthiness certificate) Errors and prior sale excepted We look forward to your visit Your team at Wohnmobilpark Am Petersberg (a division of Autohaus Am Petersberg GmbH) Model/Year: 2026, Available from: 04.04.2026, Internal ID: 90, Base vehicle: FIAT Ducato, Transmission: Automatic, Beds: Transverse double bed, Sleeping area: Rear (186x149 cm), Seats with seatbelt: 4, Heating: Truma Combi 4D diesel heater, Refrigerator capacity: 84 l, Fresh water tank: 85 l, Waste water tank: 75 l

Condition: used, mileage: 2,000 km, power: 125 kW (169.95 HP), number of beds: 2, number of seats: 4, fuel type: diesel, gearing type: automatic, color: black, first registration: 04/2025, total length: 784 mm, total width: 2,320 mm, total height: 2,920 mm, emission class: euro6, overall weight: 4,500 kg, Equipment: onboard kitchen, Eura Mobil Contura 766 EF - Model Year 2024 - Only about 2,000 km Top-spec configuration – List price: €166,800 For sale on behalf of customer Vehicle available at short notice Luminary Package CT: * Bumpers & attachments painted in body color * Electric exterior mirrors * 17" alloy wheels * Comfort seats in cab * MBUX 10" navigation receiver with dual-lens reversing camera * Electric parking brake * Chrome radiator grille * Mercedes-Benz 9G-Tronic automatic transmission * 170 HP engine (upgrade from 150 HP) * 92-liter diesel tank * Thermally insulating glass with band filter * Exterior design in carbon * Storage compartment under dashboard * Acoustic package * Climatronic automatic climate control * Dashboard charging package * Leather steering wheel * Inductive charging station * Traffic sign recognition assistant * Active distance assistant Distronic * Obsidian black exterior paint * Body door with 2-point locking and central locking * Starlight dome * Electric roof ventilator * Manual cab darkening system * Mosquito screen door * Pre-wiring for solar system Dwjdpfx Abjx Enmcj Tjf * Range hood Driver Assistance Package: * Active lane keeping assistant * High beam assistant * Fog lights * Tire pressure sensors * LED high-performance headlights Additional equipment: * Upholstery "Beige leather" * "Maka" decorative trim * "Navarra" furniture decor * 5.0 m awning * Lithium batteries (2 pcs.) * Twin satellite system, fully automatic, with 2 smart TVs * Truma Aventa roof-mounted air conditioning * Dometic inverter * Solar package 240 Watt incl. I-Boost 370 Watt * Additional 12 V lighting in garage * Towbar * Goldschmitt hydraulic leveling jacks * SOG toilet ventilation * External gas connection * Outdoor shower Incl. gas inspection certificate and vehicle documents Errors and prior sale excepted We look forward to your visit Your team from Autohaus Am Petersberg Model/year: 2024, Internal ID: 800, Emission class/standard: Euro 6d-final, Base vehicle: Mercedes, Transmission: automatic, Beds: single beds, Sleeping areas: rear (195x80 & 200x80), Seats with belt: 4, Heating: Alde hot water heating, Fridge volume: 177 l, Fresh water tank: 138 l, Waste water tank: 100 l, Battery: lithium battery Ah, Note: for sale on behalf of customer, CHASSIS: fixed towbar

Year of construction: 2007, condition: ready for operation (used), This MEP SHARK 330 NC eco was manufactured in 2007. A robust metal band saw, it features a maximum vise opening of 335 mm and can handle round materials up to 300 mm, square materials up to 250 mm, and flat materials up to 330 x 250 mm. It operates with a 0.75 kW motor at 380 V and weighs 52 kg. Contact us for more information about this machine. Dwsdpfox Enl Sox Ab Tof Application Types Sawing

Condition: ready for operation (used), Year of construction: 2011, operating hours: 42,991 h, General Data Machine weight 4700 kg Main Drive Spindle speed range 12000 rpm Spindle motor power 9 kW Tool taper SK40 Number of axis 5 Movement X-Axis Movement 610 mm X-Axis Rapid Traverse 35 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 35 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 30 m/min Table Table load 1000 kg Additional Equipment 24-fold changer Chipping screw Electrical handwheel Incl. KITAGAWA round table IHK 30 bar This 5-axis Hurco VMX24t was manufactured in 2011. Ideal for complex and precise machining tasks, this vertical machining center offers advanced control technology and robust construction. Consider the opportunity to buy this Hurco VMX24t vertical machining center. Contact us for more information about this machine. Dwodox Enl Ejpfx Ab Tsf Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 21000 kg Table Table load 160 kg Main Drive Number of axis 2 Movement X-Axis Movement 2500 mm Y-Axis Movement 1525 mm Djdpfsx Enlxox Ab Towf This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Application Types Punching

Condition: ready for operation (used), Year of construction: 2003, General Data Machine weight 6000 kg Main Drive Number of axis 3 Spindle Speed 12000 RPM Tool taper SK 40 Dwodpfx Ajx Enlreb Tef Movement X-Axis Movement 1050 mm Z-Axis Movement 500 mm Y-Axis Movement 500 mm This 3-axis Mazak VCN 510C was manufactured in 2003. It features a spindle speed of 12,000 rpm with an SK40 taper and a tool magazine with 30 positions. The table size is approximately 1300 × 550 mm, and it includes a cooling system with 15 bar internal pressure. Consider the opportunity to buy this Mazak VCN 510C vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,321 h, Control Unit Brand MAZATROL Model SmoothG Djdpfox Enllox Ab Tswf Main Drive Number of axis 4 Spindle Speed 18000 RPM Spindle motor power 35 kW Tool taper SK 40 Movement X-Axis Movement 560 mm Z-Axis Movement 640 mm Y-Axis Movement 640 mm Tools Slots in storage 60 This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle cooling at 32 bar, and a Renishaw OMP 60 touch probe. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, it's ideal for precise and efficient machining. Consider the opportunity to buy this Mazak HCN 4000 horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2019, Main Drive Number of axis 3 Dwedjx Enlfspfx Ab Tef This 3-axis ACCURL CPL 2040 plasma cutting machine was manufactured in 2019. It features a cutting width of 2000 mm and a length of 4000 mm. It utilizes a Hypertherm Powermax 125 source, capable of cutting mild steel up to 36 mm, stainless steel up to 20 mm, and aluminum up to 18 mm. Consider the opportunity to buy this ACCURL CPL 2040 plasma cutting machine. Contact us for more information. Application Types Cutting

Year of construction: 2010, operating hours: 640 h, condition: ready for operation (used), This ERMAK EPP 1270 was manufactured in 2010. A CNC punching machine in excellent condition, it has been used for only 640 hours. Regularly maintained and fully functional, it is ready for any type of inspection and testing. Includes a tool sharpener and numerous tools. Reach out for more information about this machine. Dwjdpfxsx Enk Uo Ab Tsf Application Types Punching

Year of construction: 1999, condition: ready for operation (used), Main Drive Spindle Speed 6000 RPM Spindle motor power 11 kW This WEINIG QUATTROMAT 23 P was manufactured in 1999. A robust wood mill, it features a working width of 13-230 mm and height of 6-120 mm. It includes four spindles with motor powers ranging from 4 to 11 kW, ensuring efficient operation. The feed speed is 8 m/min, and the spindle speed reaches 6000 rpm. Consider the opportunity to buy this WEINIG QUATTROMAT 23 P wood mill. Contact us for more information. Dwedpfsx Enk Iex Ab Tjf Application Types Milling (Wood)

Year of construction: 2018, condition: ready for operation (used), General Data Machine weight 5650 kg Measurements height 2370 mm Measurements depth 1644 mm Dimensions Machine Length 2587 mm Movement X-Axis Movement 600 mm Y-Axis Movement 200 mm This 6-axis TRUMPF TruBend 3066 B26 press brake was manufactured in 2018. It features a press force of 660 kN, a bending length of 2600 mm, and a stroke of 200 mm. The machine includes a 4-axis backgauge (X/R/Z1/Z2) and operates with a rapid approach speed of 200 mm/s. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 3066 B26 machine we have for sale. Contact us for more information. Application Types Dwsdsx Enkzepfx Ab Tof Bending

Condition: ready for operation (used), Year of construction: 2000, Main Drive Number of axis 3 Spindle Speed 10000 RPM Movement X-Axis Movement 1000 mm Z-Axis Movement 600 mm Y-Axis Movement 600 mm This 3-axis Quaser MV 204 II was manufactured in 2000. It features a spindle speed of 10,000 rpm and a CNC control system by Selca 3045 PD. The machine includes a magnetic table measuring 630 mm x 400 mm and a tool magazine with 20 positions. If you are looking to get high-quality milling capabilities, consider the Quaser MV 204 II machine we have for sale. Contact us for more information. Djdpex Enkuofx Ab Tswf Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information. Application Types Robotics Dwodex Enknjpfx Ab Tsf

Year of construction: 2011, condition: ready for operation (used), This Husky Hypet 120 was manufactured in 2011. A PET preform injection moulding machine with a clamp force of 1,200 kN and tie-bar spacing of 500 × 500 mm. It features a CNC control system and an electric injection system, ideal for high-volume production of PET preforms for bottles. Consider the opportunity to buy this Husky Hypet 120. Contact us for more information. Application Types Dsdjx Enkhjpfx Ab Tewf Injection Moulding

Condition: ready for operation (used), Year of construction: 2006, This HOMAG Brandt Profiline KDF - 780 was manufactured in 2006. It features a swiveling control panel, durable keypad, and a color graphic flat screen. The edgebander handles edge thickness from 0.4 to 12 mm and workpiece thickness up to 60 mm. Variable feed rate is 20 m/min. Overall length is 7360 mm. Contact us for more information about this machine. Application Types Dwsdpsx Enkbjfx Ab Tsf Edge Banding

Condition: ready for operation (used), Year of construction: 2000, Control Unit Brand FANUC Model 18-M Main Drive Number of axis 3 Movement X-Axis Movement 560 mm Z-Axis Movement 570 mm Y-Axis Movement 400 mm This 3-axis DAEWOO ACE-V400 vertical machining center was manufactured in 2000. It features a working envelope of XYZ dimensions 560 x 400 x 570 mm and includes a hand wheel. If you are looking to get high-quality milling capabilities, consider the DAEWOO ACE-V400 machine we have for sale. Contact us for more information. Dwjdpfx Abox Eni Ro Tjf Application Types Milling

Year of construction: 2012, condition: ready for operation (used), This BOMAR Induvidual 620.460 Ganc was manufactured in 2012. It features a chip conveyor, enhancing its functionality as a metal band saw. Consider the opportunity to buy this BOMAR Induvidual 620.460 Ganc metal band saw. Contact us for more information. Dedpfxex Eni Dj Ab Towf Application Types Sawing

Condition: ready for operation (used), Year of construction: 2017, This FORMAT4 Tempora 60.08 edgebander was manufactured in 2017. It features a feed speed of 12 m/min with a chain feed system and can handle edge thicknesses from 0.4 to 8 mm. Designed for professional furniture manufacturing, it includes milling and scraper units for precise edge finishing and a heated glue pot for consistent adhesive application. Ideal for high-quality, reliable edgebanding performance. Contact us for more information. Application Types Dedox Eniwopfx Ab Towf Edge Banding

Year of construction: 2017, condition: ready for operation (used), This FORMAT4 Kappa Automatic 80 panel saw was manufactured in 2017. It features a cutting length of 3200 mm, a saw blade diameter of 320 mm, and a blade protrusion of 80 mm. The saw carriage is heavy-duty, designed for continuous and serial production. It includes an automatic feeding and clamping system for efficient workflow, and an extraction system suited for high-demand environments. Ideal for cutting furniture boards, MDF, plywood, and wood-based panel materials. Contact us for more information. Dwodex Eniqepfx Ab Tef Application Types Sawing (Wood)