BerlinSicherheitsGlas BSG GmbH

Condition: like new (used), Year of construction: 2021, Functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport - tilting table (discharge) Description of Line Components Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated for by tilting the suction frame. The suction frame has a rotating function to collect short formats in an upright position and to place them down on the long edge. Light crane Trolley crane with a lift system traveling on rails by hand, which are standing on steel supports. lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustic signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulkollan transport rollers. In vertical position transport rollers with Perbunan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Driven by a geared motor, A.C., frequency-controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. Gbslhowii Hfecdw Ijl Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Transport rollers, which are individually driven by worm gear wheels are placed on a solid welded frame. The transport rollers are arranged in drag bearings. Tilting arms are in horizontal position. The integrated tilting table is made of several profile arms which can be tilted (electro-mechanical by crank mechanism) from the horizontal position by 84°. The tilting speed has its lowest speed at the beginning and at the end of the movement. The glass is tilted from vertical to the horizontal position. If no glass happens to be in the Pre-Heating oven the glass runs into the oven.

Year of construction: 2009, Condition: ready for operation (used), A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible. Gbslewihzujhcdw Iol

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: V3097, Tecnocat lifter for 250Kg with 2 spare vacuum cups and incl. ABUS hoist. Golhcdwswg E E Se Ijbl

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 2000.4 Max. Glas-height: 2.000 mm Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Golhewd Raiocdw Iebl Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Hydro 3000.6 Max. Glas-height: 3.000 mm Thickness: 3-22 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 6 brushes (150 mm) maid out of one piece with Incl. water tanks Gbslhcjwd N Urodw Iol incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: used, Functionality: fully functional, Vacuum lifter for DLF and PLF sheets Max 1200Kg Double Bush vacuum circuit. Gbjlhswc T Tvjcdw Ijl Trolley with support incl.

Condition: like new (used), Functionality: fully functional, overall weight: 2,430 kg, Year of construction: 2023, operating hours: 160 h, Vertical flat glass washing machine Passage height: 2000 mm (max. glass height: 2000 mm) Running direction: right to left Brushes: 3 pairs of brushes Gslhjwc Abijcdw Isbl Low-e: Front brushes are for low-e glass (low-e capability) Transport distance: EL and AL 3000 mm (inlet and outlet transport each 3000 mm) Glass transport height vertical: 520 mm from the floor Water tank underneath the machine: Cascade system, first tank heated Voltage: 400 V/50 Hz Connected power: 30 KW Total length with inlet and outlet: 8100 mm

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, total length: 6,000 mm, total width: 4,000 mm, total height: 2,000 mm, overall weight: 1,000 kg, A functioning dishwasher. In very good working condition. Gjlhcdwswbz A As Isbl

Year of construction: 2020, operating hours: 500 h, Condition: like new (used), Functionality: fully functional, For sale a line for collecting and receiving glass with a turntable, very little used, for testing in our company the concept has changed and we are selling Gbjlowavnqshcdw Isl

Condition: used, Year of construction: 2019, Type: SG-3000-2DD Gjljwarqzjhcdw Iobl Info: Max.Glass Dimension: 1800*2800mm (bottom floor); 2000*3000mm (top floor) Max.Glass Thickness: 15+15mm Min. Glass Thickness: 3+3mm EVA Film Thickness: 0.25-0.76mm Machine dimension: 3680*2260*1650mm Machine weight:2ton Installed Power: 46KW Heating power: 43KW Heating temperature 0-130C Electricity 380V 50HZ Sensors: 8 Available glass: float glass +float glass; tempered glass + float glass Vacuum value: -0.1Mpa

Condition: like new (used), Functionality: fully functional, Year of construction: 2022, EVA and PVB laminaition furnace Golhcdswarqhjw Isbl used in lab for test only very good condition as new 12 KW max glass dimension 1200 x 2000 mm dimensions 2800 mm x 1650mm closed and if opened 2900 mm

Year of construction: 2022, Condition: good (used), LAMMY BASIC Mod. SMART size MEDIUM glass 1250 x 2400 mm 400V Gslhjwarp Recdw Iebl 50Hz 16 KW H1250 x L2950 x W2140mm Internal height 530mm Open W = 2770mm Weight 750 kg

Year of construction: 2023, Condition: used, machine/vehicle number: 22230057, with roller support, material infeed, washing unit, make MALNATI, type: 2300TN, year of manufacture 2023, serial no. 22230057, power: 50 kW, attached extraction unit, separate control cabinet, discharge table, control make WEINTEC Golhewactgocdw Iebl

Year of construction: 2023, Condition: used, Consisting of: Cleanroom access with 1-door, glazed, with SIEMENS control system and touch panel, as well as enclosure, integrated ceiling crane system, on 2 travel rails, mounted on vertical struts, bolted, with electric chain hoist, ABUS, and manipulator, HEGLA, type: VHG-500H, built in 2023, load capacity: 500 kg, extraction, temperature control, and vacuum traverse, HEGLA, built in 2023, max. load capacity: 250 kg Gbelhcewacrijdw Ijl

Year of construction: 1999, Condition: used, machine/vehicle number: 19084, Weight: approx. 3500 kg, max. load capacity: 750 kg, with vacuum beam, span: approx. 20,000 mm, with 15 two-sided storage racks, mostly made by HEGLA, built approx. 1990 - 1995, load capacity: 10 kg per side, mobile shelving, metal, painted, green, with 12 units and electric drive, rail-guided, with stationary loading, built in 2006 Golhcewacr Asdw Isbl

Year of construction: 2021, Condition: ready for operation (used), Functionality: fully functional, Machine no longer required. Ideal dual sided protective film applicator. Gjlhov U Spbscdw Isbl

Condition: new, Functionality: fully functional, Electric Potters Disc Machine New. 230 V With chair and shapers. Good working condition. Please check out our other listings as well. Gbolov U Emgohcdw Isl

Condition: excellent (used), Automatic molding for plates and/or salad bowls with drying tank and complete with various accessories. Brand: JOB FORNI Gslhcdsv Upkcew Iobl

Year of construction: 2009, Condition: like new (used), Functionality: fully functional, Still in CLEANROOM at the moment!!! with S!MPATI software with vacuum connection Gbeljv T I I Rehcdw Iel Vötsch Drying Cabinet VTLF 160/150/110. Max temp 190°C. Drying format 1000x1400 mm. Stainless steel equipment. Filter H13. Function The VTLF cleanroom dryer for coating materials is designed and constructed according to EN 1539. After the load has been placed in the dryer and the doors are closed, the circulating air flows around the load in the dryer's usable space. The turbulent flow ensures good and spatially uniform heat transfer to the load. Technical Specifications Interior (usable space) m3 2.78 Internal dimensions Width Height Depth mm 1600 1500 1100 Weight (net) kg approx. 1400 Recirculation fan speed Min. setting range Max. setting range % 50 120 Minimum exhaust air flow rate (extraction mode) Reduced exhaust air flow rate (recirculation mode) m3/h 360 90 Flushing time 5 air changes per second 300 Total steam volume m3 4.5

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, Dual Chamber During Oven 1,700 x 1,400mm (2,40m2) Process area based on largest substrate; 4.1. Process area (minimal); 1,700 x 1,400mm (2,40m2) 4.2. Substrates are (non-) heat treated, (non-) TCO coated optical white (or standard) float glass sheets with straight or pencil edges and (non-) edge delete patterns (1) 4.3. Substrates are rectangular shaped (2) general Electrical diagram (see appendix 1) Main power supply voltage 3x400 ± 5% + earth, 50Hz ± 5% Control voltage 230Vac 50Hz and 24Vdc Main fuse 140A Engine power Circulation fan motor 2.2 kW (2 pcs.) Drive motor vertical transport 0.39 kW Drive motor horizontal transport 0.09kW 1.5.3 Heating system Heating Heating type Electric with closed tube elements Power 30 kW per room Gbslhjv T I Iqecdw Iol Overall, the system consists of two parts, viz: - The furnace consists of two chambers each with an air circulation fan and adjustable air inlet. - The conveying system consists of a trolley with vertical and horizontal movement. The oven is suitable for curing heat treatments under air atmosphere with cleanroom classification in the temperature range from 50ºC to 250ºC. One heat cycle per chamber can be programmed. The cart can place glass from the conveyer position into one of the two chambers where the products undergo a selected heat cycle. And then removed from the oven and placed back in the conveyor position.

Condition: used, • The assembled machine can be viewed in D. Weisense until the end of April. • Type - PARTICA GLP 3000 • Year of manufacture – 2013 • No. GG 1800-0690 • With 3 axes • Numerous diamond and polishing tools • Dimensions: W 5200 x D 2900 x H 2000 mm • Travels approx. 3150 x 1415 mm • 16-station tool changer • Weight: 4300 kg Very good condition, little used, from a small company. Gbelsv Tya Sjhcdw Ijl

Condition: used, • Good condition • Print area approx. 3000 x 1800 x 1100 mm Gslov Sar Eehcdw Iebl

Condition: like new (used), Year of construction: 2023, 4000 x 3000 mm 280 kW 1 x Basic machine 3 x Additional transfer plate 1 x Cistern with open air cooling 1 x Tubing of the cistern and open air cooling 1 x m² Roller conveyor ROF 1 x Scissor lift table Hub 1 x Roller conveyor ROF Gbolsv R H Nujhcdw Iel

Condition: used, Cutting head for Hegla Formline KT-19I Replacement cutting head, model cutting system. Gbjlev Rattshcdw Isl Little second-hand. SK. No.: 1611-10-138 Length: 225 mm. Width: 120 mm. Height: 320 mm. Weight: 9260 g.

Condition: used, Year of construction: 1998, For glass dimensions: 6000 x 3210 mm. Frame served as a shelf for glass loading forks. Load capacity: 24000 kg. Max. Loading height: 3210 mm. Gjlhcdjv N I E Uew Iobl Length: 5800 mm. Depth: 1250 mm. Height: 3430 mm.