Kvinta BCL LTD

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for processed wood: diameter 160mm - Rotor working width: 980mm - Main motor: 18.5kW - Number of knives: 24 pcs - Knife size: 30x30mm Codpfsy Nyx Eox Akcorb - Screen: 20mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approx. 2500kg ADVANTAGES – Made in Germany – Auto-reverse – Feed drawer – Very good condition – Used chipper Net price: 85,900 PLN Net price: 20,450 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, mileage: 658,000 km, emission class: euro6, Year of construction: 2014, Year of construction: 2014 Crodey Nyv Rspfx Akcjb

Condition: ready for operation (used), functionality: fully functional, mileage: 470,000 km, power: 323.62 kW (440.00 HP), first registration: 10/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x4, fuel: diesel, gearing type: automatic, suspension: steel-air, Year of construction: 2009, Equipment: ABS, AdBlue, EBS, air conditioning, central locking, crane, cruise control, differential lock, full service history, non-smoking vehicle, parking heater, retarder, trailer coupling, truck registration, Special Equipment: Battery 220 Ah, aluminum air reservoir, air horn, cab: movable cab entry, long-distance package, urea tank (AdBlue): 95 liters, fuel tank: 500 liters aluminum, DuoMatic coupling heads, air filter: construction vehicle filter, MB 2C PTO, programmable special module, Voith retarder, acoustic reverse warning (external warning signal), cab seats: driver’s comfort suspension seat with horizontal suspension, 12-volt socket, stone guard mesh, twin-disc clutch, transmission oil cooler Crjdey Nyv Dopfx Akcsb Additional Equipment: EURO 5 emission standard, axle configuration: 6x4, trailer brake 2-line, tow coupling: recovery coupling, tow coupling: G 150, trailer socket 24V / 15-pin, electrically adjustable and heated exterior mirrors, wide-angle and heated exterior mirror, left, outside temperature display, roof hatch (steel), rear axle differential lock, cab: bad-road suspension (6.0 HZ), cab: M (medium length), generator 80 A, body/chassis: chassis, model update from 06/2008, engine 12.0 L - 320 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4500 mm, disc brakes, steel rims 9.00x22.5, Telligent gearbox, Telligent brake system with ABS+ASR, front underride guard, CB radio preparation, telephone/fax preparation, cranked front axle, immobilizer, heat-insulating glazing, central locking with key, permitted gross weight 26.0 t

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: HEIDENHAIN, overall weight: 15,070 kg, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG DECKEL MAHO DMF 260|11 was manufactured in 2010. It features a spindle speed of 14,000 RPM and a tool magazine with 30 stations, providing efficient tool management. The machine is equipped with a swivel milling head and an NC rotary table for enhanced versatility. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMF 260|11 vertical machining centre we have for sale. Contact us for further details. • Power consumption: 46 kVA • Voltage: 400 V 3/N, PE • Frequency: 50/60 Hz Codpjy Nyvwefx Akcerb • Nominal current (In max): 66 A • Maximum fuse: 80 A • B-axis: Swivel milling head • C-axis: NC rotary table (left side) • Cooling: Cooling unit for drives • Lighting: LED machine light • Axis drives: X/Y/Z feed drives Additional equipment • Spray gun Technical Specification Taper Size SK 40

Condition: excellent (used), functionality: fully functional, mileage: 70,137 km, number of beds: 2, number of seats: 4, fuel type: diesel, gearing type: automatic, color: white, chassis manufacturer: Fiat, chassis model: Ducato 2.2 Mjet, total length: 5,990 mm, total width: 2,050 mm, total height: 2,520 mm, axle configuration: 2 axles, emission class: euro6, fuel tank capacity: 90 l, overall weight: 3,500 kg, operation weight: 2,810 kg, steering wheel position: left, number of previous owners: 1, Year of construction: 2023, machine/vehicle number: ZFA25000002W62383, Equipment: ABS, air conditioning, airbag, bathroom, bunk beds, car registration, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, full service history, lift bed, middle seating arrangement, navigation system, onboard kitchen, parking sensors, power assisted steering, second-hand vehicle warranty, shower, soot filter, traction control, We offer flexible consumer credit options for easy, stress-free purchases! The Nomad camper is designed for travelers seeking freedom and comfort on the road. Whether you're planning a weekend getaway or a long road trip, this camper is engineered to meet all your travel needs with reliability and convenience. 💰 Warranty and Money-Back Guarantee ✔ 1-year Indie Campers warranty 🛡️ ✔ Satisfaction guaranteed! Try it for 14 days, and if you're not satisfied, we'll refund your money! ✔ Vehicle inspection up to date and ready to hit the road! What makes this camper special? ✅ Spacious and comfortable: With a length of 599 cm and a height of 252 cm, it offers plenty of space to relax. ✅ Fuel-efficient and powerful: 2.2 MJet diesel engine, 120 HP, manual transmission, and Euro 6 emissions class. Crodpfx Asy Nyuyskcjb ✅ Ideal for 4 people: Features 4 seats and 2 beds, perfect for families or group travel. ✅ Fully equipped for the road: Includes gas heating, auxiliary heater, air conditioning, and a separate shower. ✅ Safety and convenience: Equipped with ABS, ESP, rear parking sensors, and power steering for a smooth drive. ✅ Try before you buy – Not sure if it’s right for you? You can rent the camper for as many days as you need to get familiar with it and ensure it’s perfect for your travels. Hit the road with the Nomad! The Nomad camper is in high demand! Don’t wait: book a viewing and make it yours today.

Condition: used, mileage: 186,110 km, power: 66 kW (89.73 HP), first registration: 08/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,750 mm, fuel: diesel, CO₂ emissions: 133 g/km, fuel tank capacity: 60 l, color: white, gearing type: mechanical, number of gears: 5, emission class: euro5, number of seats: 2, total length: 4,740 mm, total width: 1,830 mm, total height: 2,130 mm, Year of construction: 2012, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, power mirror, sliding door, General information Number of doors: 5 Model range: Jan 2009 - Dec 2014 Cab: single Technical information Torque: 200 Nm Number of cylinders: 4 Engine capacity: 1.248 cc Top speed: 156 km/h Measures length/height: L1H1 Weights Empty weight: 1.245 kg Carrying capacity: 775 kg GVW: 2.020 kg Interior Interior: black Consumption Average fuel consumption: 5 l/100km (56 MPG) Urban fuel consumption: 6,5 l/100km (43 MPG) Extra urban fuel consumption: 4,2 l/100km (67 MPG) Maintenance, history and condition Number of owners: 2 Number of keys: 3 (1 hand transmitter) Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Bluetooth car kit - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Front fog lights - Heated door mirrors - Height adjustable steering wheel - Immobiliser - Loading floor - Partition - Radio/CD player Crjdpjy Nyutefx Akcob - Rear doors - Rear parking sensor - Remote central locking - Sliding side door right - Third brake light

Condition: excellent (used), strip width: max. 1.750 mm strip thickness: 0,4 - 3 mm cross cut swivelling range: +/- 34° Crodpfey Nyugsx Akcob coil weight: max. 25 t Coil OD: max. 2.000 mm mandrel Ø: 508 mm year: 1971/2004/2020/2023

Condition: used, mileage: 676,312 km, first registration: 10/2020, fuel type: diesel, tire size: 315/80 R22.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: ABS, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, soot filter, spoiler, = Additional options and equipment = - CD player - Roof spoiler - Spare key - Speed limiter - Aluminum fuel tank - Power take-off (PTO) - Particle filter - Headlights - Stability control - Standard air conditioning - Sun visor - Alternating current - Toolbox - Xenon lights = Further information = Tire size: 315/80 R22.5 Codpsy Nyt Aefx Akcjrb Axle brand: Different Brakes: Disc brakes Front axle: Steered; Tire tread left: 7 mm; Tire tread right: 8 mm; Suspension: Leaf spring Rear axle: Dual tires; Left inner tire tread: 14 mm; Left outer tire tread: 12 mm; Right inner tire tread: 13 mm; Right outer tire tread: 12 mm; Suspension: Air suspension Unladen weight: 7,260 kg Payload: 11,740 kg Gross vehicle weight: 19,000 kg Damages: None

Condition: used, axle configuration: 3 axles, first registration: 12/2008, suspension: air, tire size: 385/55 R22.5, color: other, Year of construction: 2008, Tyre size: 385/55 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Crodpfjy Nytvox Akcob Rear axle 1: Lift axle; tyre tread left: 3 mm; tyre tread right: 3 mm Rear axle 2: tyre tread left: 1 mm; tyre tread right: 3 mm Rear axle 3: tyre tread left: 4 mm; tyre tread right: 4 mm Damage: none

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Codpfx Akey Nytpjcsrb Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: excellent (used), Catalogue number 7259 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW - Conveyor belt feeder: 0.55 kW Crsdey Nytiepfx Akcjb - Feeder belt length: 3000 mm - Feeder belt width: 410 mm - Main motor: 45 kW - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on exchange rate 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2020, overall weight: 25 kg, load capacity: 5 kg, arm reach: 1,200 mm, number of axes: 7, This 7-axis KASSOW ROBOTS KR1205 was manufactured in 2020. It features a reach of 1200 mm and a payload capacity of 5 kg, making it suitable for various applications. The robot arm includes an original Kassow Controller and a tablet teach pendant for ease of use. If you are looking to get high-quality automation capabilities, consider the KASSOW ROBOTS KR1205 robot arm we have for sale. Contact us for further details. • Joint speed: 225 deg/sec • Joint ranges (J1, J3, J5, J6, J7): +/- 360° • Joint ranges (J2, J4): -70°/+180° • Repeatability: +/- 0.1 mm • Power consumption: 400–600 W (with max load) • Supply voltage: 100–120 or 200–240 VAC (50/60 Hz) • Supply current: 16 A • Operating temperature: 0–45°C • Operating humidity: 30–85 %RH non-condensing • Protection rating: IP54 • Sound level: Below 70 dB(A) • Footprint: 130 x 130 mm • Operating hours: < 300 hours • Body material: Anodized aluminum • Controller: Original Kassow controller included • Teach pendant: Included (tablet) • Cable lengths: 5 m (controller to arm), 4.5 m (controller to teach pendant) Cjdpfoy Nytcox Akcorb Additional equipment • Schunk Co-act EGP-C 64 gripper

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Year of manufacture 1988, cutting capacity 5300 x 2200 mm, cutting thickness 80 mm, horizontal cutting height 2100 mm, integrated extraction unit, manual or automatic feed 11/17/22/33 m/min, machine width 6300 mm, saw blade 300 ø, 7.5 HP motor, digital measuring system horizontal and vertical, machine ready for immediate use, very good condition ex location Cjdpfx Aksy Nyr Sscjrb Transport possible at extra cost!

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Codpfxjy Nyrxs Akcjrb Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode Credpfxoy Nyq Ue Akceb - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Year of construction: 1994, condition: good (used), Ilapak Packaging Machine - used - year of manufacture: 1994 Codoy Nyq Ijpfx Akcsrb - model: DUE S - machine previously in production, complete and in good working order - collection from warehouse / shipping option available - price: €3,900 EXW

Condition: new, Year of construction: 2026, For sale is a high-quality Robland multi-combination machine. This unit integrates several woodworking functions in a compact and extremely robust design—ideal for workshops, joineries, or ambitious woodworkers. General Data: + Weight: 560 kg + Motor power: 3 kW (4 HP) Circular Saw: + Saw blade diameter: 250 mm + Speed: 4500 rpm + Max. cutting height: 85 mm + Swivel range: 90° – 45° + Sliding table: 1450 mm + Rip fence cutting width: 655 mm + Extraction ports: 100 mm + 60 mm Cjdpsy Nyqusfx Akcjrb Spindle Moulder: + Spindle diameter: 30 / 32 / 50 mm / 1¼" + Spindle speeds: 3000 – 6000 rpm + Max. tool diameter: 180 mm + Max. tool height: 120 mm + Travel: 140 mm + Tilting up to 90° + Optional tenoning hood up to 250 mm + Extraction port: 100 mm Planer & Thicknesser: + Cutter block diameter: 70 mm + Cutter block speed: 5500 rpm + Working width: 310 mm + Planer table: 1320 x 310 mm + Thicknessing height: up to 230 mm + Number of knives: 3 + Tersa cutter block + Planer knives: 310 x 25 x 3 mm + Feed speed: 6 m/min + Extraction port: 100 mm + Mortising unit (optional) + Drill chuck: 0 – 16 mm + Travel: 165 x 140 mm + Drilling depth: 85 mm Location: 39340 Haldensleben Price: €5,750 net

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: Crsdsy Nyqnjpfx Akceb - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 2013, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 920 mm, workpiece height (max.): 50 mm, number of axes: 3, actuation type: electric, overall weight: 720 kg, Equipment: CE marking, Drilling machine, compact CNC machining center Vitap Point 2, year 2013. The listed price is gross. The machine is operational and ready for inspection. It has been with our company since new, used on one shift as an auxiliary machine, and has not been in operation for the last 5 years. Comes with a new toothed drive belt installed plus 1 spare new belt. TECHNICAL DATA Drilling and milling unit: - Number of independent vertical spindles: 8 - Number of horizontal spindles in X axis: 4 - Number of horizontal spindles in Y axis: 2 - Saw unit – blade diameter: 100 mm - Milling head: 3.6 kW, ISO 30 – 12,000/24,000 rpm - Spindle speed: 3,600 rpm - Saw speed: 7,000 rpm - Maximum horizontal drilling depth in X and Y axes: 30 mm - Maximum vertical drilling depth: 45 mm - Maximum horizontal tool diameter: 12 mm Cjdjy Nyqhepfx Akcorb - Maximum vertical tool diameter: 35 mm - Number of controlled axes: 3 - Motor power: 1.5 kW Workpiece: - Maximum panel thickness: 50 mm - Maximum panel weight: 25 kg - Maximum panel size: X 1,100 mm, Y 50 mm - Minimum panel size: X 270 mm, Y 150 mm, Z 12 mm - Panel feed speed: 25 m/min MACHINE PARAMETERS Electrical Specifications: - Rated voltage: 400 V - Frequency: 50 Hz - Rated current: 21.1 A - Total power: 6.4 kW Air pressure: 7 bar Weight: approx. 715 kg

Condition: reconditioned (used), Year of construction: 2006, Jufeba Doughnut Fryer - Semi-automatic - used - year of manufacture: 2006 - refurbished in 2023 - capacity: 48 pieces - proofing cabinet - trolley with proofing trays - manual control - good technical condition Crjdpfx Aey Nyp Rokcsb - pickup from warehouse/shipping option - price on request

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL DATA - Feed opening width: 720 mm - Feed opening height: 160 mm - Thickness of material to be shredded: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Entry pressure feed roller: 0.75 kW - Bottom gear-driven feed roller: 1.8 kW - Top gear-driven feed roller: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German-made – Very low hours of use Cedpfx Akoy Nypqecjrb – Original documentation - Autoreverse (adjustable) – Used shredder, in very good / excellent condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm No. of strips: max. 11 Codpfx Akey Nypkocerb coil weight: max. 25 t coil OD: max. 2.000 mm mandrel Ø: 508/610 mm year: 1990/2002/2006/2016/2019

Condition: excellent (used), mileage: 676,173 km, power: 191 kW (259.69 HP), first registration: 06/1991, fuel type: diesel, tire condition: 50 %, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 8,000 mm, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 1991, Equipment: ABS, differential lock, electric window regulation, = Additional options and accessories = - 1 fuel tank - Armrest - Day Cabin - Drum brakes - Front suspension: Leaf - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Sper - Tipping hydraulics = More information = Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Differential lock Rear axle 2: Double wheels; Differential lock Tipper: Back Crsdpfsy Nyn Tjx Akcsb Technical condition: very good Visual appearance: very good

Condition: ready for operation (used), Year of construction: 2002, operating hours: 22,542 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 570 mm, travel distance Z-axis: 635 mm, controller manufacturer: FANUC, controller model: Series 21i-T, number of axes: 3, This 3-axis Gildemeister CTX 400 Serie 2 was manufactured in 2002. It features a spindle speed of up to 5,000 rpm and a z-axis travel of 635 mm, along with an x-axis travel of 570 mm over the bed. The machine includes a 12-position turret and is equipped with a 3-jaw chuck, chip conveyor, and coolant system. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 Serie 2 machine we have for sale. Contact us for further details. • X-axis travel: max. 570 mm (over bed) / 420 mm (over slide) • Voltage: 400 V • Frequency: 50 Hz • Power capacity: 44 kVA • Rated current: 64 A • Main fuse: 80 A • Control voltage: 230 V (AC) / 244 V (DC) • Working hours: 22,542 hours • Feed time: 8 hours 4 minutes • Turret: 12-position turret • Tooling capability: driven tools; C-axis displayed on screen Additional equipment • 3-jaw chuck • Chip conveyor • Coolant system • Workspace lighting • Optional: Tool Holder Package Cjdpfx Akey Nynyocorb • Optional: Schunk Rota NCD 210-66 three-jaw chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: new, Year of construction: 2025, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 380 V, input current: 63 A, type of input current: three-phase, travel distance X-axis: 4,200 mm, travel distance Y-axis: 2,100 mm, number of axes: 3, number of slots in tool magazine: 8, actuation type: electric, total length: 4,200 mm, total width: 4,000 mm, overall weight: 5,000 kg, table length: 3,200 mm, table width: 2,100 mm, Equipment: CE marking, documentation/manual, SUPER NOVA 2132 - CNC ROUTER Brand new and ready for pick-up. Showroom packaged machine including NC Hops 8 and 2*250 m³/h vacuum pumps. EXW BELGIUM. Super Nova 7.5 - 9 kW Spindle (ISO 30) Super Nova 9-Spindle Vertical Boring Unit Super Nova Handwheel Unit Credpfx Ajy Nynmskcob Super Nova Automatic Lubrication Unit Rotary Tool Changer Unit (8-tool capacity) 2 x 250m³/h Vacuum Pumps 6-Zone Vacuum Table NC HOPS - 3-Axis CNC Router (with nesting) Safety Lights (1 set) Tool Holder/Collet Kit (8 pcs) Super Nova HMI - English Interface Super Nova 2132 Seaworthy Packaging System