Porlammin Meijeri Oy

Condition: used, mileage: 36,265 km, power: 70 kW (95.17 HP), first registration: 07/2022, fuel type: electric, empty load weight: 2,776 kg, maximum load weight: 724 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,924 mm, fuel: electricity, color: white, gearing type: automatic, suspension: other, number of seats: 3, total length: 5,932 mm, loading space length: 3,273 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Equipment: air conditioning, airbag, central locking, sliding door, Disc brakes, double passenger seat, rear step, interior trim, high roof, partition, electric, 3-door, 1st owner, front-wheel drive, green environmental badge (4), steel rims, reversing camera, anthracite color, sliding door on the right, parking assist camera, electric windows (2), seat heating, radio, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, power steering, electric exterior mirrors, speed limiter, 3rd brake light, German version, additional equipment available, errors and prior sale excepted, trade-in possible, financing possible, please contact us, we will prepare a customized offer for you. "The vehicle has a battery certificate." B25 Parking brake, electric BH1 Hold function CE8 Higher roof CL1 Steering wheel adjustable in inclination and height D03 High roof D50 Full partition E07 Hill-start assist E1D Digital radio (DAB) E1OM Audio system E4T High-voltage battery (47 kWh) E6LAC Charging 7.4 kW / DC charging 80 kW E9L Charging cable Mode 3 (Type 2, 3x32A) 8m ED4 Fleece battery 12 V 92 Ah ES0 Jump start assistance EW6 Digital extra: Remote Services Plus EW8 Digital extra: Remote and Navigation Services EY5 Mercedes-Benz emergency call system EY6 Breakdown management F4 Heated windshield F68 Heated and electrically adjustable exterior mirrors FF5 Storage compartment above windshield FJ4 Storage compartment under dashboard FR3 Reversing camera with display in interior mirror FY7 Multi-button remote control H16 Seat heating for driver H21 Heat-reflecting glass with band filter on the windshield HH9 Semi-automatic climate control system TEMPMATIC IK0 Complete vehicle ISR Wheelbase 3924 mm IT4 3.5-ton vehicle J1W Service interval 1 year J2A Acoustic environmental protection J55 Seatbelt warning system for passenger seat J58 Seatbelt warning system for driver seat J65 Outside temperature display JA Crosswind assist JF1 Rain sensor JHK Communication module (LTE) for digital services JI6 Start mileage, service interval 40,000 km L65 Roof light(s) LD-/FG-compartment with door contact LA2 Driving light assistant LB1 Kdsdpfx Aaoy Twmuj Del

Condition: used, mileage: 44,414 km, power: 70 kW (95.17 HP), first registration: 10/2022, fuel type: electric, empty load weight: 2,778 kg, maximum load weight: 722 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,924 mm, fuel: electricity, color: white, gearing type: automatic, suspension: other, number of seats: 1, total length: 5,932 mm, loading space length: 3,273 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Equipment: air conditioning, airbag, central locking, had accident, sliding door, Disc brakes, rear step, interior trim, wooden cargo floor, L2 chassis length, H2 height type, high roof, partition, electric, clock & tachometer, 3-door, 1st owner, front-wheel drive, blue environmental badge (6), steel rims, rearview camera, anthracite, sliding door on the right, parking assist camera, electric windows (2), seat heating, radio, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, power steering, electric exterior mirrors, speed limiter, 3rd brake light, center armrest, country version Germany, additional features available, errors and prior sale excepted, trade-ins possible, financing possible, please contact us, we will prepare a customized offer for you. "The vehicle has a battery certificate." B25 Parking brake, electric BH1 Hold function CE8 Body raised D03 High roof D64 Partition with sliding door E0 Hill start assist E1D Digital radio (DAB) E1O Audio system E1Q Selection of regeneration levels deactivated E4T High-voltage battery (47 kWh) E6LAC Charging 7.4 kW / DC charging 80 kW E9L Charging cable Mode 3 (Type 2, 3x32A) 8m ED1 Fleece battery 12 V 70 Ah ES0 Jump start assistance - contact EW6 Digital extra: Remote Services Plus EW8 Digital extra: Remote and Navigation Services EY5 Mercedes-Benz emergency call system EYP Failure management F68 Exterior mirrors, heated and electrically adjustable FR3 Rearview camera with display in the interior mirror H16 Seat heating for driver H2W Heat-reflecting glass with band filter on the windshield HH9 Semi-automatic climate control system TEMPMATIC IS3 Wheelbase 3924 mm IT4 3.5-ton vehicle J1W Maintenance interval 1 year J2A Acoustic environmental protection J58 Seatbelt warning system for driver's seat J6 Outside temperature display JA8 Crosswind assist JH3 Communication module (LTE) for digital services JI6 Start-up mileage Maintenance interval 40,000 km L65 Ceiling lights LD-/FG compartment with door contact LA2 Headlight assistant LB1 Side marker lights LB5 3rd brake light LC2 LED strip in the cargo area LE1 Adaptive brake light ME0 Electric motor 85 kW MK5 Speed Kjdpjy Twmnsfx Aa Dedl

Condition: used, mileage: 78,000 km, power: 375 kW (509.86 HP), first registration: 12/2021, fuel type: diesel, empty load weight: 12,680 kg, maximum load weight: 13,320 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, seat heater, traction control, trailer coupling, Vehicle location: in transit, internal code. Features include: 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, air horn, ABS (Anti-lock Braking System), traction control (ASR), constant throttle, PTO (power take-off), automatic transmission, differential lock, fog lights, work lights, leaf-air suspension, trailer coupling air-light-hydraulic, underrun protection, side aluminum underride guard, roof hatch, green environmental badge. Wheelbase: 3900 mm. Superstructure: interchangeable system consisting of a 21t hooklift system Hiab Ultima ULT21S46 for containers from 4.5m to 6m, Dautel 3-way tipper body (optional at extra cost) & fifth wheel (optional at extra cost). NN driver's cab, construction package, trailer package, EBS, ABS, full emergency braking assistant, disc brakes on front axle, drum brakes on both rear axles, high-performance engine brake MAN EVBec, brake pad wear indicator, lower radiator guard, gearbox MAN TipMatic 12.28 OD, driving programs MAN TipMatic Performance, Efficiency and Offroad, LED daytime running lights, cornering lights, ESP, ASR, MAN sound system, MAN Media System Navigation, KSM, PTO NH/4c without flange f=1.14. Matching Dautel 3-way tipper body (interchangeable system) available at extra cost of €24,900 net! Matching fifth wheel (interchangeable system) available at extra cost of €6,900 net! Matching Liebherr concrete mixer (interchangeable system) available at extra cost of €14,900 net! Original new price of vehicle with interchangeable system approx. €235,000! All information provided without guarantee as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted. Kodpoy Twmhsfx Aa Djdl - .

Condition: used, empty load weight: 11,860 kg, maximum load weight: 22,140 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 07/2008, next inspection (TÜV): 07/2026, suspension: air, tire size: 385/65R22.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, 1st axle liftable, last axle steering, ABS (anti-lock braking system), catwalk, side underrun protection, supports, storage box, rotating beacon, rear discharge. Superstructure: Suction and pressure tank semi-trailer with 1 compartment approx. 26,000 l with ADR (FL/AT), 3x 9t BPW axles, disc brakes, 1st axle liftable, 3rd axle steered! Next tank inspection: 07/2026! Leakage and functional test valid until 07/2029! Accessory information without guarantee. Subject to change, prior sale and errors excepted! Kdedpjy Twmbjfx Aa Djl

Condition: good (used), functionality: fully functional, machine/vehicle number: 0577, spindle bore: 80 mm, center height: 280 mm, quill diameter: 75 mm, total length: 3,400 mm, total width: 1,100 mm, total height: 1,700 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 20 rpm, bed width: 345 mm, overall weight: 4,000 kg, spindle mount: MK 7, JESSEY MAYOR 2280 Lead Screw and Lathe Spindle Turning Machine - Voltage: 400 V - Frequency: 50 Hz - Distance between centers: 2000 mm - Swing over bed: 560 mm - Swing over cross slide: 390 mm - Swing in the crotch: 810 mm - Center height: MK 5 Kdjdpfx Aoy Twl Rea Del - Motor power: 7.5 kW - Bed width: 345 mm - Bed length: 2650 mm - Cross slide travel: 265 mm - Top slide travel: 135 mm - Tailstock travel: 180 mm - Tailstock spindle diameter: 75 mm - Lead screw diameter: 35 mm - Lead screw pitch: 6 mm - Includes two-axis digital readout, manufacturer EASSON, type: ES-8, as well as a three-jaw chuck, diameter: approx. 400 mm - With Multifix base and tailstock, plus an additional steady rest and a side cabinet with a stock of turning tools, tool holders, reducing sleeves and additional chuck jaws Note: The item must be collected between July 14 and July 16, 2026, on a date to be arranged. FCA D-45883 Gelsenkirchen - loaded onto a truck.

Condition: good (used), functionality: fully functional, machine/vehicle number: RCF145, mileage: 76,709 km, power: 75 kW (101.97 HP), first registration: 05/2023, fuel type: diesel, empty load weight: 1,468 kg, maximum load weight: 572 kg, overall weight: 2,040 kg, tire condition: 100 %, next inspection (TÜV): 05/2028, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 4,403 mm, total width: 1,848 mm, total height: 1,880 mm, Equipment: ABS, EBS, air conditioning, airbag, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, sliding door, soot filter, start-stop system, truck registration, Special equipment: - Front electric windows with pinch protection - Load compartment flooring (plastic) - Rear parking pilot system - Tyre pressure monitoring system - Passenger side seat belt warning system - Drive type: front-wheel drive - Steering wheel audio controls - Audio system BT (Bluetooth/USB interface) - Electronic Stability Program (ESP) - Driver assistance system: Hill Start Assist (HSA) - Cruise control - 6-speed transmission - Rear wing doors without glazing - Body type: panel van - Air conditioning - Full partition wall for load compartment - Leather sport steering wheel (3-spoke, flat-bottomed) with multifunction - Engine: 1.5 L - 75 kW CDTI DPF - Fog lights - Wheel covers - Wheelbase: 2,785 mm - Diesel particulate filter - Low emissions according to Euro 6d standard Kdodpfx Aaey Twlks Djl - Halogen headlights - Sliding door on the right

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Two-crank mechanical press with a rigid frame structure. Manufactured by: SIMPAC INC., South Korea – 2019. 3-in-1 feeder line TAE IN TECH TNCL-5042 with an unwinder. Pressing force: 300 tons. Maximum pressing point (R.T.P.): 6.0 mm before the lower dead center. Slider stroke: 250 mm. Kdedpfsy Twk Tox Aa Dsl Working speed: 22 – 45 strokes/minute (continuously adjustable with a frequency converter). Maximum die height: 650 mm. Slider adjustment: 120 mm. Work table: 2650 x 1100 mm, thickness 200 mm. Slider: 2350 x 1000 mm. Air pressure: 5 bar. Overall dimensions (L x W x H): 3600 x 2800 x 4650 mm. Machine weight: 50,000 kg. Motor power: 37 kW. Total weight of the line: approximately 56 tons. Total power consumption of the line: approximately 55-60 kW.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 417 h, Amada HFE M2 5012 press brake (2021) Manufacturer: Amada Type: HFE M2 5012 press brake Condition: used, in production and operational Year of manufacture: 10/2020 Operating hours: 6830 hours Working hours: 417 hours (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without punch holder (mm): 480 Kdjdpfsy Twk Hex Aa Del Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600 Video available.

Condition: good (used), Year of construction: 2004, functionality: fully functional, NATGRAPH UV DRYER Kjdpfx Aey Twkmoa Dodl Automatic Stacker: NATGRAPH Raised

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES CUT 2000 AWC WIRE EDM MACHINE (DOUBLE HEAD) MANUFACTURED IN 2012 TRAVEL: X 350, Y 250, Z 256, U, V +- 70 MM MAXIMUM TAPER: 30º/100 MM LINEAR GUIDES AUTOMATIC THREADING AND RE-THREADING Ksdpfx Aoy Twkasa Dodl DOUBLE HEAD OPTION TO WORK WITH 0.05 AND 0.07 MM WIRES ACCEPTABLE WIRE RANGE: 0.05 - 0.33 MM AGIEVISION 5 GENERATOR SUPERFINISH MODULE FOR FINISHES UP TO 0.05Ra RE-THREADING HEIGHT: 220 MM COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical Details Measuring range X-axis: 300 mm Measuring range Y-axis: 250 mm Measuring range Z-axis: 600 mm Tool diameter: mm Table size: mm Control: Weight: 700 kg Machine dimensions: 2600 x 1400 x 1900 mm Coolant tank: 800 x 600 x 920 mm Additional information Combined setting, shrinking, and measuring device, induction coil with tailstock and cooling system CNC control Software: Saturn 1 Zoller Multivision II Automatic length stop system in the Z-axis for setting and shrinking to the target dimension Cooling system with water for cooling times of max. 40 seconds Kdjdpey Twi Asfx Aa Djl Setting to the target dimension, shrinking, and inspection measurement for one tool in max. 2 minutes, including cooling Without tool holders (attachment holders). On May 30, 2022, the machine was inspected by a technician from ZOLLER. Shrinking is currently not possible. The induction coil and drive unit would need to be replaced. The purchase price of a comparable new machine (including software) from ZOLLER is approximately EUR 100,000.00, with a current delivery time of approx. 52 weeks!

Condition: ready for operation (used), Year of construction: 2016, product length (max.): 5,015 mm, Edge and profile sandingr manufactured in 2017. This HEESEMANN UKP 20 features a total conveyor length of 5015 mm and a feed speed range of 5-25 m/min. It includes two belt sanding units for sanding straight edges and small profiles, with electronic frequency control for speed adjustment. If you are looking to get high-quality sanding capabilities, consider the HEESEMANN UKP 20 machine we have for sale. Contact us for further details. Kdedpey Twhxjfx Aa Del Workpiece conveyor system • Total length: 5015 mm • Drive: 1.5 kW three-phase motor, double chain transport • Feed speed: 5–25 m/min, frequency-controlled • Working height: 880 mm (constant) • Integrated control cabinets • Adjustable stop rail with digital display and counter rail with central width adjustment • 4 side guide rollers between sanding units for safe strip transportControl • Industrial PC, 10.4" LCD-TFT touchscreen • Production and downtime display • Program memory for 100 programsSanding units • 2 x belt sanding units “M4” (Positions 1 and 2) • Application: Straight edge sanding • Belt: 2300 x 80 mm • Speed: 0.7–12 m/s, stepless via electronic frequency control • Motor power: 3.0 kW • Electronic sanding pressure control from terminal • 2 x oscillation units for “M4” (Positions 1 and 2) • Purpose: Full utilization of sanding belt • 2 x belt sanding units “K4” (Positions 3 and 4) • Application: Small profile sections; chamfering • Swivel range: +90° upward / -45° downward • Belt break switch • Tool holder with quick-change mechanism • Intermittent belt feed mechanism • Belt: 2000 x 50 mm • Speed: 0.5–8 m/s, stepless via electronic frequency control • Motor power: 1.1 kW • Electronic sanding pressure control from terminalAutomation/line control • 4 electronic line controls for fully automatic timing of tool contact/lift-off based on set feed rate, sanding pressure, and unit angle

Condition: ready for operation (used), machine/vehicle number: YS2P6X20009207888, mileage: 362,192 km, first registration: 05/2016, fuel type: diesel, empty load weight: 14,181 kg, overall weight: 26,000 kg, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, total length: 9,300 mm, total width: 2,500 mm, total height: 3,400 mm, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, electric window regulation, onboard computer, retarder, tachograph, Dear Sir/Madam, The subject of this advertisement is a Scania P320 truck with a FAUN refuse collection body. VIN: YS2P6X20009207888 First registration date: 18/05/2016 EURO 6 Mileage: 362,192 km Power: 235 kW Engine capacity: 9291 cm3 Fuel: diesel Drive: 6x2 Gearbox: Scania automatic Suspension: leaf spring and pneumatic GVWR: 26,000 kg Payload: 11,819 kg Curb weight: 14,181 kg Body: FAUN VR5 LEV Factory number: 80299-2 Capacity: 18.5 m3 Dimensions: Length: 9.3 m Width: 2.5 m Height: 3.4 m Equipment: ABS Differential lock Central lubrication system Electric windows Electric, heated mirrors Hydraulic power steering Engine brake Hydraulics Immobilizer Retarder On-board computer Manual air conditioning Rear view camera Fog lights Sun visor Speed limiter Radio Adjustable suspension Reversing signal LED lights Rotating lights Tachograph Cruise control Multi-function steering wheel Dual rear wheels Lane departure warning system We offer: Vehicle service after purchase Maintenance and repairs for equipment purchased from us Transportation to any location worldwide Kedpfjy Twhfox Aa Dedl Upon your request, we will perform: Filter and oil changes in the vehicle Filter and oil changes in the body Additional service: As a leader in the Central European market, specializing in the sale of municipal vehicles and equipment, we would like to offer you the opportunity to benefit from our many years of experience in this field and sell your surplus municipal equipment through us. On your behalf, we will take care of: - Contact with the customer in several foreign languages - Preparation of sales and after-sales documentation - Organization of road and sea transport - Organization of customs documentation (customs clearance, Eur 1, T1) - Preparation of the vehicle for sale Leasing options are available for older vehicles, even those up to 18 years old. If you would like to know more, please contact us.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, AGIECHARMILLES CUT 300 SP WIRE EDM MACHINE, YEAR OF MANUFACTURE 2014 FIXED TABLE TRAVEL: X 550, Y 350, Z 400, U 550, V 350 MM MAXIMUM TAPER 30°/400 MM LINEAR SCALES Kjdpfx Asy Twg Uea Dsdl AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 400 MM WIRE SPOOLS UP TO 16 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: new, Year of construction: 2026, pressing force: 15 t, C-Press – 15 T – 300 × 300 mm For sale is a C-press from the manufacturer DURENDUS with a maximum pressing force of 15 tons. The machine has a table size of 300 × 300 mm, a maximum installation height of 350 mm, and a stroke of 250 mm, making it suitable for insertion work, assembly processes, and small-batch production in industrial applications. ##### Technical Data + Information: ==== General Information - Design: C-frame / Single-column press - Manufacturer: DURENDUS - Pressing force: 15 T - Table size: 300 × 300 mm - Plunger plate: 300 × 300 mm - Installation height max.: 350 mm - Working height: 800 mm - Overall height: approx. 2,000 mm - Overall width with control cabinet: approx. 900 mm - Overall depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Plunger plate guidance: 2-way ==== Hydraulic Cylinder - Stroke: 0–250 mm - Working pressure: 250 bar - Starting speed: 17 mm/s - Return speed: 25 mm/s ==== Hydraulics & Drive - Hydraulic unit: DUPLOMATIC - Hydraulic pump: ASC - Flow rate: 7.5 l/min - Tank volume: 50 l - Cooling: Air cooler - Oil level monitoring: electronic - Hydraulic unit: mounted on top of the machine ==== Control - PLC: SIEMENS S7-1200 - Touchscreen: SIEMENS 7" - Pressure setting via touchscreen - Stroke setting via touchscreen - Temperature monitoring of hydraulic oil - Error display on display - Remote service / remote maintenance possible - Operation: Two-hand operation ==== Safety - Light curtain - Two-hand operation - Temperature monitoring - Automatic shutdown in case of overheating - CE-compliant design ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 2.2 kW - Lighting: LED - Protection class control cabinet: IP 54 ##### Application areas: Insertion, assembly work, small-batch production, jig and fixture construction, toolmaking, metalworking, fine assembly, testing, workshop applications (Hydraulic press, C-press, C-frame press, Single-column press, 15 T press, 15-ton press, assembly press, insertion press, small-batch press, workshop press, industrial press) Kdedpfx Aaoy Twg Ie Dol Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly attractive prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 160 t, stroke length: 150 mm, overall weight: 19,000 kg, Equipment: CE marking, Single-point hydraulic knuckle press, complete with accessories. Uncoiler, straightener, feeder, and safety guards. Manufactured by HANIL KNUCKLE PRESS CO LTD, South Korea – 2018. Model HKCA-160. Pressing force: 1600 kN. Maximum pressing point (R.T.P.): 4.0 mm before the lower dead center. Slider stroke: 180 mm. Working speed: 80 strokes/minute. Maximum die height: 450 mm. Slider adjustment: 100 mm. Work table: 1300 x 700 mm x 14 mm thick. Working slider: 900 x 600 mm. Air pressure: 5 bar. Dimensions (Width x Length x Height): 2100 x 1800 x 3450 mm. Ksdpfx Ajy Twgzea Dodl Weight: 19 tons. Main motor: 15 kW.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 127094, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, total height: 2,000 mm, total length: 7,200 mm, total width: 2,000 mm, overall weight: 7,000 kg, spindle nose: JIS A2-S, controller manufacturer: OKUMA, controller model: OSP-P 200 L, operating hours of spindle: 5,000 h, number of slots in tool magazine: 12, OKUMA LB 300-M CNC lathe - Turning diameter over bed: 530 mm - Turning diameter over cross slide: 530 mm - Turning diameter over tool rest: 420 mm - Distance between centers: 1020 mm - Spindle bore: 100 mm - Feed range Z-axis: 0.001 to 1000 mm/min - Rapid traverse Z-axis: 25,000 mm/min - Feed range X-axis: 0.001 to 1000 mm/min - Rapid traverse X-axis: 20,000 mm/min - Speed range of driven tools: 45 to 4500 rpm (infinitely adjustable) - C-axis adjustment: 360° - Rapid traverse of the C-axis: 200 rpm - Diameter of the tailstock: 90 mm - Including the tools located on the turret, two foot switches, operating manual (if available) Kdodpfxjy Twghj Aa Del - With chip conveyor and bar feeder SAMSYS, type: MULTI-3000 Note: the item must be collected between July 14th and 16th, 2026, on a date to be agreed upon. FCA D-45883 Gelsenkirchen - loaded onto a truck.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, AGIECHARMILLES CUT 200 MS WIRE EDM MACHINE, MANUFACTURED IN 2015 MS MACHINE (THERMOSTABILIZED) FIXED TABLE TRAVEL: X 350, Y 250, Z 220, U 350, V 250 MM MAXIMUM TAPER: 30°/220 MM LINEAR GUIDES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT: 220 MM Kedpfx Aajy Twf Re Dodl COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Kdodoy Twfwopfx Aa Dol Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Kdedpfx Aaey Twfqj Del Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch - Electrical safety control Optional equipment: - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: new, IVECO Trakker Tway 540, Construction vehicle, New, 540 hp, Automatic transmission, Retarder-intarder, Towing capacity, Power take-off, Radio/navigation system, Sun visor, Differential lock, Electrically heated mirrors, Euro 6, Air-suspended driver's seat, Air conditioning, Leaf spring suspension, Fully equipped, complete with EMILCAMION S5 tipper body with a round container, 8 mm Hardox steel bed, 6 mm Hardox steel sideboards, Hydraulic tailgate with gull-wing design, Marcolin cover and uncover system with remote control. Kedpfx Ajy Twfkea Dsdl

Condition: ready for operation (used), Year of construction: 2008, operating hours: 2,502 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 6,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis KONDIA A10 vertical machining centre was manufactured in 2011. It features a travel of 1000 mm on the X-axis, 500 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed of 8000 rpm and a tool capacity of 24 slots. If you are looking to get high-quality machining capabilities, consider the KONDIA A10 machine we have for sale. Contact us for further details. Kdodjy Twd Tspfx Aa Djl - Travel X-Axis: 1000 mm- Travel Y-Axis: 500 mm- Travel Z-Axis: 500 mm- Rapid Traverse: 20 m/min- Spindle Speed: 8000 rpm - Tool Capacity: 24 slots- CNC Control: Heidenhain iTNC 530- TE Electronic Unit Type: TE 520B- Control On Hours: 17849 h- Machine On Hours: 11292 h- Program Run Hours: 2726 h- Spindle Run Time: 2502 h- Total Power Installed: 37 kW- Year of Manufacture: 2011- Machine Weight: 6000 kg- Voltage / Frequency: 400 V / 50 Hz- Air Pressure: 6 bar- Scope of Delivery: touch probe

Condition: good (used), Year of construction: 2002, functionality: fully functional, Technical details x-travel 2800 mm y-travel 2200 mm z-travel 800 mm Control Heidenhain iTNC 530 table surface area 3000 x 1200 mm Kdedpfx Aajy Twdmo Djl tool taper HSK-A-63 spindle turning speed range 12000 U/min power capacity 18 kW feed range 35000 mm/min total power requirement 68,7 kW dimensions of the machine ca. 12,4 x 3,5 x 4,6 m Additional information The FPT DINO is a 5-axis portal milling machine designed for the precise machining of large components. With a cross travel of 2200 mm and a high-speed spindle with 12,000 rpm, this machine combines high machining volume with outstanding dynamics in finishing. Heidenhain iTNC 530 CNC path control Number of controlled axes (simultaneously): X/Y/Z/C/B Travels: X-axis (longitudinal travel) 2800 mm Y-axis (cross travel) 2200 mm Z-axis (vertical travel) 800 mm Machine length: 12,434 mm Machine width: 3,597 mm Machine height: 4,622 mm Coolant equipment (no coolant through spindle) Chip conveyor

Condition: good (used), mileage: 58,895 km, power: 121 kW (164.51 HP), first registration: 10/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 105 l, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, total length: 6,850 mm, total width: 2,090 mm, total height: 2,400 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,800 kg, Year of construction: 2020, Equipment: ABS, EBS, air conditioning, central locking, electric window regulation, power assisted steering, power mirror, = Additional Options and Accessories = - Automatic low beam headlights - Heated exterior mirrors - Co-driver's bench seat - Euro 6 emission standard - Driver airbag - Remote-controlled central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Front center armrest - Rain sensor - Engine immobilizer - Partition = Additional Information = General Information Number of doors: 2 Cab: single Registration number: V-78-PLN Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Front axle: Max. axle load: 1850 kg; Steered Kdodpfx Aaey Twdgj Djl Rear axle: Twin tires; Max. axle load: 2800 kg Weights Unladen weight: 2,570 kg Payload: 930 kg GVW: 3,500 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 01/2027 Technical condition: good Optical condition: good

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,779 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 1,250 mm, spindle motor power: 28,000 W, overall weight: 6,000 kg, controller manufacturer: SIEMENS, controller model: 840D SL, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine includes a 12-station disc turret and live tooling capabilities for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG NEF 600 horizontal turning machine we have for sale. Contact us for further details. • Turning length: 1200 mm • Main spindle: Integrated spindle motor • Turret: 12-station disc turret • Tool holder standard: VDI 40 • C-axis brake: Hydraulic • Tailstock: Automatic • Coolant system: Coolant equipment with chip pan • Operating software: ShopTurn • Control panel: ERGOline operating panel • CAD reader: External PC compatible • Hydraulic unit: Included for clamping device and steady rest • Hollow clamping device: Hydraulic • Max draw tube diameter: 95 mm • Coolant spray gun: Included • Chip conveyor: Right side discharge • Chip conveyor discharge height: 1250 mm • Steady rest type: Self-centering steady rest • Steady rest range: Ø 50–200 mm • Chuck type: 3-jaw power chuck • Chuck model: ROTA-NCK plus • Tool spindle 1: Angled 90° live tool holder • Tool spindle 2: Straight 0° live tool holder • Tool spindle application: Drilling, milling and tapping • Tool holder shaft standard: DIN 69880-40 • Electrical cabinet cooling unit: Up to 40°C • DMG Netservice onboard: Installed Ksdpfx Aajy Twc Ns Dsdl OPTIONAL approximately 100 different tool holders (VDI holders) Technical Specification Counter Spindle No Driven Tools Yes