Uttikal

Condition: ready for operation (used), Year of construction: 2012, Available immediately from Swiss toolmaking facility: Vertical 5-axis simultaneous machining center Unitech Type: HSM – IC 5 Axis Year of manufacture: 2012 Control: Heidenhain iTNC 530 Table size: 1100 x 600 mm Travel (X/Y/Z): 1080/610/810 mm Rotary table diameter: 600 mm Spindle speeds: up to 15,000 rpm Feed rates: up to 30,000 mm/min Table load capacity: 500 kg Tool holder: BT 40 Magazine: 40 stations Through-spindle coolant (IKZ) 60 bar Ijdpeyayk Usfx Ah Netb Chip conveyor Compressed air through spindle Spindle hours: 8,200 / Spindle will be completely overhauled in 2025, then reset to 0 hours Glass scales on X and Y axes Zero point measuring system in rotary table Infrared measuring system Zero point clamping system integrated in rotary table with 10 clamping pots by Schunk Weight: 10 tons Offered at the price of EUR 15,000 -- plus VAT, ex works

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex location: Vertical Machining Center Sigma Type Zenit 3 Year of manufacture 2001 Heidenhain TNC 426 – M Table 1200 x 500 mm Travel X/Y/Z 1000/500/550 mm SK 40 Tool magazine for 50 tools Spindle speeds up to 12,000 rpm Through-spindle coolant Weight 6.5 tonnes Priced at EUR 7,000,-- plus VAT ex location. Ijdpfxeyaykus Ah Nstb

Condition: used, Year of construction: 2005, 1 unit 3-axis machining center, make Bridgeport model VMC 760 XP³, year 2005, serial number 310B107, machine weight 6,780 kg, control Heidenhain iTNC 530, recorded operating hours 13,983, control on time 14,538 h, program run time 5,923 h, milling table approx. 1,000x600 mm, 5 T-slots, XYZ travels approx. 760x610x610 mm, chip conveyor, 30-position tool changer, internal no. 10 Itjdpfx Aeyaw Nhjh Nsb

Condition: used, Year of construction: 2012, 1 unit universal milling machine, manufacturer Kunzmann, model B 1000 - 810 Z Vario, year 2012, serial no. 101166, machine weight 10,100 kg, XYZ travel – 1,020 x 620 x 810 mm, control unit Heidenhain iTNC 530, recorded operating hours 26,337, program run time 22 h, spindle run time 21 h, Heidenhain HR 410 electronic handwheel, TS 640 probe, Renishaw laser control system, milling table approx. 1,200 x 600 mm, 6 T-slots, 32-position ATC, chip conveyor by Mayfran BA 800/1000, band filter system, internal no. 11 Category: Machinery and Technical Equipment Isdoyaw Iwepfx Ah Netb Sale subject to reservation: The sale of this item is subject to reservation and independent of the achievement of the minimum price. A decision regarding the acceptance of the bid will be made as soon as possible.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,060 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, controller manufacturer: FANUC, controller model: Series Oi-MC, table load: 1,000 kg, number of axes: 3, This 3-axis Yida MV-1060 vertical machining center was manufactured in 2008. It features a 1060 × 620 × 620 mm travel range, 10,000 rpm spindle speed, ISO 40 spindle taper, and through-spindle coolant at 20 bar. The table supports up to 1000 kg and measures approximately 1200 × 600 mm. Equipped with linear guides, a chip conveyor, and a coolant system. If you are looking to get high-quality milling capabilities consider the Yida MV-1060 machine we have for tact us for more information. Additional equipment • Equipped with chip conveyor and coolant system Machine Benefits Technical Machine Benefits • Table clamping area: approx. 1200 × 600 mm • Tool magazine: usually 24–30 tools (to be confirmed) • Through-spindle coolant: 20 bar • Through-spindle coolant: 20 bar • Ce certified Extra Information Machine still under power Itodpfx Ahsyar A Nj Njb Technical Specification Through-spindle Coolant Yes

Condition: used, Year of construction: 1996, Saeilo Contur 1000, year of manufacture 1996, Heidenhain TNC 407 control, travels X/Y/Z 1016/610/508 mm, 40-position tool changer, SK 40, spindle speed up to 8,000 rpm, 2-speed gearbox, table size 1080 x 580 mm, 3-jaw chuck Ø 250 mm with jaws, 3-jaw chuck Ø 310 mm with jaws, machine weight 5,800 kg. Iodpjyaqtysfx Ah Njtb

Condition: good (used), Year of construction: 2014, Spinner MCV 1000, year of manufacture 2014, Heidenhain TNC 620 control, travel X/Y/Z 1016/610/508 mm, 32-position tool changer, SK 40 spindle taper, prepared for internal coolant, table size 1200 x 500 mm, max. table load 800 kg, spindle speed up to 10,000 rpm, SK 40 spindle taper, chip conveyor, 4-jaw chuck Ø 250 mm with jaws, 3-jaw chuck Ø 315 mm with jaws. Isdpfx Ajyaqn Deh Notb

Condition: not inspected (used), Year of construction: 2013, functionality: unexamined, machine/vehicle number: 131057, overall weight: 6,900 kg, number of axes: 3, Equipment: chip conveyor, cooling unit, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 3 Tool changer: 30 positions Control: SIEMENS Sinumerik 828D MACHINE DETAILS Machine weight: 6,900 kg EQUIPMENT Chip conveyor Itodpsyaqlisfx Ah Nsb Cooling units

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: ML 964F08, controller manufacturer: Siemens, controller model: SIEMENS Sinumerik, number of axes: 3, Equipment: chip conveyor, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 3 Control: SIEMENS Sinumerik EQUIPMENT Tool changer Chip conveyor Ijdpfx Aeyaqi Ieh Netb

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: MCV 600, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Fanuc, controller model: 0IMC, table width: 600 mm, table length: 1,200 mm, spindle speed (max.): 3,000 rpm, input voltage: 440 V, type of input current: AC, Equipment: chip conveyor, Machine VMC 011 Iedoyamxlopfx Ah Nstb 1 Make AMS 2 Model MCV 600 - Pallet Change 3 Pallet change type Linear 4 Fanuc Series OI MC 5 Table Size 1200 X 600 6 Year of Mfg 2007 7 X axis stroke in mm 1020 8 Y axis stroke in mm 600 9 Z axis stroke in mm 600 10 Spindle BT 40 11 ATC - No of Tools 24 nos 12 4th axis Option Interface NA 13 Coolant Tank Available 14 Chip conveyor Available 15 Nozzle coolant Available 16 Present Condition Running

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller manufacturer: FANUC, controller model: 21i-MB, This 3-axis Victor Vcenter A-110 was manufactured in 2009. It features a FANUC 21i-MB CNC, with a working range of X 1100, Y 600, Z 560, and a spindle speed up to 12000 rpm. It includes an ISO 40 tool holder and a 30-tool magazine, complemented by a conveyor and high-pressure system. Consider the opportunity to buy this Victor Vcenter A-110 vertical machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Number of tools: 30 Itjdpfx Aheyallwe Nsb • High pressure

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: na, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis FIRST MCV-1000 was manufactured in 2002. A vertical machining centre with a working area of 1020 × 510 × 510 mm, it features a 24-tool arm type magazine and a spindle speed of 8,000 rpm. If you are looking to get high quality milling capabilities consider the FIRST MCV-1000 machine we have for sale. Contact us for more information. Itedpfxoyalkge Ah Neb Machine Benefits Technical Machine Benefits • Tool magazine: 24 tools, arm type (random access) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, total height: 2,692 mm, table load: 700 kg, overall weight: 5,500 kg, number of axes: 3, This 3-axis Mazak VTC-20B was manufactured in 1996. It features a Mazatrol M-Plus or M-32B controller, with axis travels of X=1120 mm, Y=510 mm, and Z=510 mm. The table supports up to 800 kg, and the spindle operates at speeds up to 10,000 rpm. Note: the handwheel requires repair. Contact us for more information about this machine. Machine Benefits Ijdpfx Ajyalicjh Netb Technical Machine Benefits • Size: 1460 × 510 mm • Tool magazine: 24 pocket Extra Information The handwheel is not fully operative and needs a repair. Dimensions Machine Depth 2997 mm

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,931 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, This 4-axis HAAS VF-3SSYT with HRT 210 4X was manufactured in 2018. It features a 12,000-rpm spindle, 30+1 side-mount tool changer, and through-spindle coolant at 300 psi. The machine includes a 4th-axis drive, wireless probing system, and high-speed machining capabilities. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SSYT machine we have for sale. Contact us for more information about this machine. Additional equipment • High-Speed 30+1 Side-Mount Tool Changer / Advanced Tool Management / Early Power-Failure Detection Module / Multi-Stage Coolant Pump / Rigid Tapping Safe Run / Media Display M-Code; M130 / Power Surge Protection / Window Air Blast / Visual Part Programming System / User-Definable Macros / Spindle Orientation / Coordinate Rotation and Scaling / Chip Tray Filter Kit / CT-Style Tool Changer Grippers / Through-Spindle Coolant, 300 psi (21 bar) / 4th-Axis Drive and Wiring / Wireless Intuitive Probing System / Chip Auger / Programmable Coolant Nozzle / High-Speed Machining / Large Remote Jog Handle with Touchscreen Display / High-Volt Transformer, Non-USA Machine Benefits Itjdpfxeyalh Es Ah Neb Technical Machine Benefits • Spindle speed: 12000 rpm • Standard program memory: 1 gb / control widescreen monitor • Remote monitoring: haasconnect / ethernet interface / wifi connection for the haas control

Condition: good (used), Year of construction: 2006, functionality: fully functional, Offered here is a machining center from the manufacturer Quaser. The machine is in very good condition and can be inspected under power at our facility. Spindle hours can be read off. Free loaded on truck. Manufacturer: Quaser Model: MV154PL/12 Control: Heidenhain iTNC 530 Year of manufacture: 2006 Technical data: Itsdpfeyak D Sex Ah Nob Travel (X-Y-Z): 1020x500x560 mm Rapid traverse: 40 m/min Table clamping surface: 1200x550 mm Spindle taper: BT 40 Big Plus Tool magazine: 30 positions Spindle speed: max. 12,000 rpm, stepless Spindle motor: 18.5 kW Transport dimensions: 2600x2450x2600 mm Weight: approx. 6.5 t Internal coolant supply (IKZ/CTS)

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, This 4-axis DMG Mori Seiki NVX-5100 II was manufactured in 2013. It features a Fanuc control unit, a table size of 1350 x 600 mm, and a maximum table load of 1100 kg. The spindle operates at 12,000 rpm with a motor power of 15 kW. It includes a 60-tool magazine, rapid traverse speed of 30,000 mm/min, and a Daikin oil cooler. Consider the opportunity to buy this DMG Mori Seiki NVX-5100 II vertical machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Spindle speed: 12000 rpm / spindle motor power: 15 kw Itsdpfx Aheyaipyo Njb • Rapid traverse speed: 30000 mm/min • Max load on table: 1100 kg • Dimensions: 1350 x 600 mm • Tool magazine capacity: 60 tools / tool change time: 0. 5 sec / chip-to-chip time: 5 sec • Cooling system: daikin oil cooler • Prism guides with automatic oil lubrication / renishaw tool measurement / automatic tool collision protection / automatic force and torque control / usb/pcmcia/rs232 ports / chip extractor system • Weight: 6400 kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 23 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: Oi, overall weight: 8,000 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis SMTCL vmc 1100B was manufactured in 2015, featuring a robust 1100mm X-axis, 610mm Y-axis, and 650mm Z-axis. It boasts a spindle speed of 10,000 rpm and a 24-tool magazine. Equipped with a Fanuc 0i control and a table surface of 1300 x 610, consider the opportunity to buy this SMTCL vmc 1100B vertical machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Table surface: 1300 x 610 mm • Number of tools in magazine: 24 Ijdsyaa Tcjpfx Ah Njtb • Tools come with the machine Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 15,000 rpm, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, CNC Fanuc 30-tool changer, BT40 spindle, max speed 15,000 rpm travels 1000x600x600 mm chip conveyor Itsdpfsx U Urwsx Ah Njb set of tools weight 7,000 kg

Condition: good (used), functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, CNC control Heidenhain Itjdpfx Ahox U Sd Rs Neb 4. axis electronical hand wheel 20-fold automatic tool changer chip tank Technische Daten / technical details: Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 1200x450 mm Werkzeugschaft / spindle taper BT40 Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 20 Gewicht der Maschine ca. / weight ca. 5000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, CNC control Heidenhain iTNC 530 electronical hand wheel 20-fold automatic tool changer chip tank Technische Daten / technical details: Iodox U Rxyspfx Ah Netb Verfahrweg X / X-Travel 1000 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 500 mm Tischgröße / table size 1150x540 mm Werkzeugschaft / spindle taper BT40 Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 20 Gewicht der Maschine ca. / weight ca. 5000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2011, x-travel 1020 mm y-travel 610 mm z-travel 610 mm control Heidenhain iTNC 530 table surface area 1200 x 600 mm Iedpfjx U Elzox Ah Njtb table load capacity 500 kg spindle drive 25 kW max. torque on the milling spindle 159 Nm spindle turning speed - stepless 30 - 12.000 U/min numbers of tools in magazin 60 Stck. / pcs tool taper SK 40 Big Plus rapid traverse 40 / 40 / 36 m/min total power requirement 25 kVA weight of the machine ca. 8,0 t dimensions of the machine ca. 5,50 x 3,50 x 2,90 m Universal machining center for complete machining in good condition:(perfect for low-manpower / unmanned production) Equipment: • Heidenhain iTNC 530 cnc control system • 60-position tool changer with double-arm gripper • LEHMANN 5-axis precision rotary table mounted on machine table • INDUMATIC - Light25 workpiece pallet changer • Automatic system for loading and unloading up to 50 workpieces • Storage and retrieval station • INDUNORM setup truck – mobile setup station • 3D measuring probe for workpiece and tool measurement (wireless) • Coolant supply through the spindle 50 bar / switchable 20/50 bar • Oil mist extraction system • Spindle oil cooler • 2 internal spiral conveyors inside • 1 Chip conveyor • Portable electric handwheel The machine can be inspected under power!

Condition: used, Year of construction: 2010, functionality: fully functional, HAAS VF6 5 AXIS WHEEL MACHINE CNC MACHINE £45K PLUS VAT Itjdjx U Earspfx Ah Nsb This machine is set up for the five axis machining of automotive wheels. Extra Z height machine to allow full use of 5 axis 2010 machine. 10k spindle side mount tool changer High speed machining enabled Networking enabled. we can set up the machine if required.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 16,051 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, This 3-axis SPINNER VC 1000 was manufactured in 2011. It features a Siemens 840DE-SolutionLine control, a 15" color screen, and a high-speed milling spindle up to 12,000 rpm. The machine offers X=1000 mm, Y=650 mm, Z=650 mm travels, and a rapid tool changer for 24 tools. Ideal for precise and efficient machining. If you are looking to get high-quality milling capabilities consider the SPINNER VC 1000 machine we have for sale. Contact us for more information. • Milling spindle up to 12000 rpm with "in-line" direct drive Itodpfx Aox Ut Hgoh Neb • Travels: X=1000 mm, Y=650 mm, Z=650 mm • Linear guides in all three axes • Tool taper size 40 according to DIN 69871-A • High-speed automatic tool changer for 24 tools • Spindle taper blow-out device • Full splash guard enclosure • Work area light • Chip conveyor VC 1000-HS • Coolant transfer to tool according to DIN 69871A • High-pressure pump and gravity paper filter with capacitive level switch • Tool holder SK40 for TC 50 touch probe

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, total height: 2,785 mm, overall weight: 6,900 kg, product length (max.): 2,280 mm, This 3-axis Mazak VCS 530C was manufactured in 2012. It features a table size of 1300 × 550 mm, X/Y/Z travels of 1050/530/510 mm, and a high-speed spindle up to 12,000 rpm. The tool magazine holds 30 tools, enhancing productivity. Ideal for detailed machining tasks, consider the opportunity to buy this Mazak VCS 530C vertical machining centre. Contact us for more information. • Rapid Traverse X-Axis: 36000 mm/min • Rapid Traverse Y-Axis: 36000 mm/min • Rapid Traverse Z-Axis: 36000 mm/min • Table Size: 1300 x 550 mm • Tool Magazine (ATC): 30 tools • Automatic Tool Presetter: Yes, contact type • Through-Spindle Coolant (High Pressure): 15 bar • Chip Conveyor: Belt type Iedpfx Ahsx Utwrj Netb Dimensions Machine Depth 2835 mm

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: PC-Fusion CNC 640 M, workpiece height (max.): 640 mm, table width: 655 mm, table length: 2,820 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, This 3-axis Mazak VTC-200B was manufactured in 1999. It features a Mazatrol PC-Fusion CNC 640 M control system, with X, Y, Z travels of 1120 mm, 510 mm, and 510 mm respectively. The machine includes a swarf conveyor, cooling through the spindle, and probes for tools and workpieces. Consider the opportunity to buy this Mazak VTC-200B vertical machining centre. Contact us for more information about this machine. • Workpiece probe Itjdpjx Utwlofx Ah Nsb • Table dimensions: 2820 x 655 mm • Table capacity: 800 kg • Tool probe • Cooling through the spindle • Swarf conveyor Technical Specification Through-spindle Coolant Yes