Wichmann & Ullrich GmbH

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Technical data : 2-stage saw motor 2.0 / 2.6 kW Njdpfx Aoxmuzasbrown Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: good (used), functionality: fully functional, . Fully hydraulic automatic circular saw, manufactured by TRENNJAEGER . Technical data : Saw motor, pole-switchable 1.5 / 2.0 kW Saw blade 275 mm Nwodpfsxg A Iuex Abrjn 6 cutting speeds 16 , 20 , 25 m/min + 32 , 40 , 50 m/min . - Integrated hydraulic system - Protective housing, limit switch-protected - 6 sawing speeds . .

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0811759, • Cutting diameter (round tubes): 8 to 90 mm • Square tube profile capacity: 10 × 10 mm to 80 × 80 mm • Cut speed / feed speed: 50 to 300 m/min • Saw blade diameter: approx. 350 mm • Motor power (saw drive): approx. 5.5 kW • Clamping system: BEWO Prisma jaw system (four-point clamping, allows simultaneous clamping of multiple tubes) • Controller / automation: Siemens CNC / centralized Siemens controller; fully automatic setting adjustments based on entered tube parameters. • Deburring: Often integrated (the machine is used together with a deburring unit/system) Njdsxcwc Sjpfx Abrown • Throughput: up to 8,000 pieces per hour in some configurations.

Condition: good (used), functionality: fully functional, Technical data : Saw motor, pole-changing 1.0 / 1.6 kW 6 cutting speeds : Motor speed 1/2 8 , 10 , 12.5 m/min and 16 , 20 , 25 m/min Cutting range 90 degrees with blade size 360 mm : round 110 mm flat 200 x 80 mm . Saw blades 315 / 360 mm Hydraulic saw feed Hydraulic material feed, min. 10 mm Njdpfoxbbi Tsx Abrswn Hydraulic material clamping 2 additional saw blades . --> --> Special price : EUR 4.150,-- net , free loaded ! . .

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping Nsdpfx Abjxabzyorown - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, saw blade diameter: 315 mm, IMET SIRIO 315 circular saw with 3 m roller conveyor on the loading side and 3 m electronic stop on the unloading side Nwsdpowzhnlofx Abren

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm Nwsdpowvbk Ajfx Abrjn total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm *

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3092102159, cutting height (max.): 70 mm, cutting width (max.): 60 mm, saw blade diameter: 285 mm, saw drive: 6 W, cutting speed: 160,000 mm/min, TECHNICAL DETAILS Material type: Construction steels, stainless steels, tool steels Saw blade type: Carbide tipped Cutting diameter: 50 – 70 mm Material width: 60 mm Material height: 70 mm Cutting area Round cutting area: 15 – 70 mm Square cutting area: 15 – 60 mm Flat cutting area: 15 x 15 – 70 x 60 mm Min. remnant length: 65 mm Saw blade and fixture Saw blade sizes: 250x80 T / 250x60 T / 285x60 T mm Saw blade holder: 32/4x9/50 mm Saw blade clamping flange: 110 mm Performance Cutting speed: 40 – 160 m/min Saw blade drive: 5.5 kW Saw feed Feed speed (infinitely variable): approx. 25 – 1,000 mm/min Rapid movement: approx. 8,000 mm/min Material feed Trolley feed speed: 15 – 40 m/min Rapid movement approx.: 95 m/min Loading table Bar lengths: 1,600 – 6,000 mm Support depth: 750 mm Max. single bar weight: 200 kg Max. total load: 2,000 kg Working height: 1,000 mm MACHINE DETAILS Machine weight: 1 t Cutting direction: Straight cut Nodpfx Abjwm Hr Horown Automation: automatic Weight: 980 kg

Condition: used, Year of construction: 1999, gebraucht 1999 6173 Deutschland 11900 € Njdpfx Abswirfdsrown 1 10700 € 500 mm 2800 U/Min Rund 180 mm, Quadratprofi Rund 120 mm, Quadratprofi 1100 mm 1450 mm 1350 mm 490 kg hydropneumatic saw feed new HM saw blade pneumatic material clamping device vertical automatically opening protective cover Discharge roller conveyor with stop and measuring system, display E 110, 1/10mm, 4.5 m long, plastic rollers b = 250 x Ø 50mm, pneum. clamping, handwheel drive and locking in the operator area, stop can be folded up user manual in GERMAN COMPLY WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO & UVV)

Condition: new, Year of construction: 2025, Schnittbereich rund: 20 - 100 mm Schnittbereich quadratisch (B x H): 20 x 70 mm Kürzeste Länge des abgeschnittenen Stücks : 5 mm Kürzeste Reststücklänge im automatischen Betrieb*: 65 mm Kürzeste Reststücklänge im Einzelschnitt: 30 mm Length: 2300 mm Breite inkl. Späneförderer : 2260 mm Height: 22100 mm Höhe der Materialauflage: 925 mm Weight of machine approx.: 3950 kg Electrical connected load: 26 kW Leistung des Sägemotors: 18,5 kW Leistung hydraulischer Motor: 2,2 kW Schnittgeschwindigkeit stufenlos regelbar: 30-160 rpm Vorschubgeschwindigkeit der Säge: 0,3-30 mm / sec Nwodpfjwaa Dvjx Abron Automatische Materialvorschublänge, Einzelhub: 800 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Sägeblattdurchmesser: 360 mm Sägeblattbohrung: 40 mm Sägeblattdicke: 2,25 mm

Condition: like new (used), Year of construction: 2002, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 0213101, saw blade diameter: 350 mm, cutting height (max.): 90 mm, input voltage: 380 V, working range: 4,000 mm, A used high class refurbished 2002 BEWO Automatic Circular Sawing including BEWO deburring machine DB-90. Machine Model FCH-90-M serial number 0213101 Including: BUNDLE LOADER: • Max. bundle diameter 650 mm, max lifting capacity 4000 kgs equally divided over 5 lifting units (max starting length 7500 mm). • The bundle loader has 5 new lifting belts. • The bundle loader is equipped with new sensors. CUTTING UNIT: • Heavy duty, high speed roller drive tube transport system, including new transport rollers. • Transport system is provided with new tooth belts. • Automatic setting of saw blade stroke. • Cutting speed sawblade chosen by customer (RPM) + new blade motor drive tooth belt. • 3 KW cutting head motor + frequency converter. • 1 saw blade, spindle 40 mm + clamping flange. • Micro lube blade coolant system c/w spray mist blade cooler. • Hydraulic material clamping system. • Tube discharge system, Max cut length capacity = 4000 mm. • 2 man length stops with new DRO + hydraulic clamping. • Siemens Simatic Panel operator HMI display and Siemens S7-300 PLC. NOTE: Control in METRIC. • 1 set of jaws included with machine. • Electrics built to European standard 400V 50Hz • Feed trough motor + new encoder + frequency converter. New plexiglass windows + new gas springs. • New steel plate for ejection table top including new table nose. • Transport system and material stops are equipped with new sensors. • New tooth belts for encoders. • New chip brush for saw blade. • New hold down finger system. • New hydraulic filters. • FAT at our workshop with material supplied by the end user. • De commissioning • Packing and loading/securing into customers container/truck. Delivery FCA. Nsdpfx Absv Sycqsrjwn • No transport and installation but can be quoted additionally and be done by our experienced team.

Condition: used, Year of construction: 2004, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm Nwodpsv Rgxpefx Abren 180 x 95 mm Working height 940 mm saw blade turning speeds 15-30-45-90 U/min total power requirement 3,15 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 1,1 x 2,1 m Electro-pneumatic, linear-guided sawing machine - Feed roller conveyor 1500mm - Micro spraying device - good condition

Condition: used, Year of construction: 2004, saw blade diameter 360 / 425 / 460 mm cutting diameter 10 - 140 mm cutting speed 25 - 160 m/min total power requirement 35 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m Nedpfev Nq Rtex Abrewn

Condition: used, Year of construction: 2016, saw blade diameter 360 mm cutting width at round material 15 - 100 mm cutting width at rectangle material 15 - 80 mm cutting speed 17 - 175 m/min Control Easy Control KASTO total power requirement 21 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 3,3 x 1,6 x 2,2 m The saw blade drive gearbox was renewed in 03/2023 by the manufacturer Material feed Material discharge Nwsdpfxov Nq Rmj Abron Chip conveyor

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 0612072, saw blade diameter: 350 mm, cutting height (max.): 90 mm, controller manufacturer: Siemens, controller model: Simatic Multi Panel, BEWO prism clamping system for simultaneous sawing of multiple tubes TECHNICAL DETAILS Control: Siemens Simatic Multi Panel Cutting capacity Round tubes: 8 - 90 mm Square tubes: 10 x 10 mm - 80 x 80 mm Nwsdpfxjv Nagde Abren Maximum capacity: 8,000 tubes per hour Saw motor Power: 5.5 kW Cutting speed: 50 - 300 m/min EQUIPMENT - Integrated deburring machine for seamless processing - BEWO prism clamping system for simultaneous sawing of multiple tubes

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 26045, saw blade diameter: 420 mm, It performs cuts with double angle. It is supplied complete with input roller conveyor and output roller conveyor equipped with measurement reader. Nwodpfx Asv Hfc Eebrjn

Condition: new, Year of construction: 2025, saw blade diameter 370 x 3,0 x 40 mm cutting diameter 120 mm stroke -- mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 180 x 100 mm capacity 45 degrees: round li. 120 / re. 105 mm capacity 45 degrees: square li. 100 / re. 100 mm capacity 45 degrees: flat li. 130x100 / re . 130x10 mm capacity 60 degrees: round 110 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 90 x 100 mm total power requirement 1,8 / 2,2 kW weight of the machine ca. 392 kg dimensions of the machine ca. 700 x 900 x 1800 mm Description: - Mitre left 60° + right 45° Nwodpevuz Rnjfx Abron - Clamping block with double clamping arm - Robust prism guide for the saw head (adjustable dovetail guide) - Chip brush - Automatic cooling - Metal handle for high clamping force - Solid, strong cast iron table

Condition: like new (used), Used automatic hydraulic bandsaw IMET BS 350 AFI-E +ESC Blade dimensions: 3370x27x0.9 mm Cutting capacity at 0°: round 305 mm, square 250x250 mm, rectangular 350x200 mm Nedpfevguyyox Abrown Cutting angle: from -45° to +60° Blade speed: two speeds Vertical vise

Condition: new, Year of construction: 2024, saw blade diameter: 285 mm, cutting height (max.): 75 mm, warranty duration: 12 months, Capacity / Capacitiy Ø10mm - Ø75mm Saw Body / Saw Body 30 Degree Angle Linear Slide 30 Degree Angle Linear Slide Nwjdpjvbzp Rjfx Abrjn Saw Engine Power / Saw Engine Power 11 KW Hydraulic Pump Engine Power / Hydraulic Pump Engine Power 3 KW Saw Feeding Servo / Saw Feeding Servo 1.5 KW SIEMENS Material Feeding Servo / Material Feeding Servo 1.5 KW SIEMENS Saw Speed / Saw Speed 70-160 (r./min.) / (RPM / Min) Saw Blade Dimensions Ø285x2,0x1,7x32mm Saw Cutting Feed / Saw Cutting Feed Servo Motor With Brake and Screw Spindle Movement Servo Motor With Brake, Screw Spindle Movement Part Feed System / Part Feed System Servo Motor and Screw Spindle Movement Servo Motor Screw Spindle Movement Automatic Part Feed Length / Auto Part Feed Length Single Feed 10-1000mm / Single Feed Part Length to be Auto Cut / Part Length to be Auto Cut 7000mm (Max) 1500mm (Min) Chip Conveyor / Chip Conveyor Palletized / Pallets Cooling System / Cooling System Pulverized Cutting Oil / Pulverized Cutting Oil Machine Weight / Machine Weight 3.500KG Bench Dimensions / Bench Size (Machine Capacity) 2595mm x 6781mm (with Loading Table and Chip Conveyor) Lubrication / Lubrication Automatic and Manual / Auto and Manual Control System / Control System Siemens PLC, Screen, Servo and Drivers, Touch Color Screen / Siemens PLC Screen, Servo and Drivers, Touch Color Screen Hydraulic System / Hydraulic System Rexroth Valves, Cooled Hydraulic Unit / Rexroth Valve, Cooled Hydraulic Unit

Condition: good (used), Year of construction: 2019, functionality: fully functional, Machine type: Amada - Schubert High Performance Saw used Make: AMADA - Schubert Type: CMB-100 CNC / TRB-SAV Year of construction: 2019 with thin blade technology in standard version, fully automatic Nwsdpfxouv Hlke Abrsn Cutting range: 25-101 mm Blade feed: 0-30 mm/sec Saw blade: 360 x 40 x 2.5 Cutting speed: 56-210 min Weight: 2800 kg further technical details on request Heavy duty feeding system for automatic separation of round and square material from 30 - 100 (140) mm and up to 8 m in length Brief description: Our feeding systems are particularly low-maintenance and robust. They are mainly used in heavy-duty areas and forging operations. 1 piece SAV 140/8 V-conveyor in standard design for processing bars up to 8 m in length. Make: Schubert General: Dimensions (L/W/H): 6500 mm/ 1500 mm/ 1500 mm Support weight: approx. 5 tons Transfer height: variable Number of supports: 4 pieces at a distance of approx. 1600 mm Drive: 2.2 kW geared motor with brake + friction clutch

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, saw blade diameter: 200 mm, Fully automatic metal circular saw for burr-free cuts and high sawing performance in thin-walled material Manufacturer: Rohbi Series: RKA-86 Njdpfxotxlxuj Abrswn Control system: Siemens Year of manufacture: 2007 Origin: Switzerland technical data: ----- - High-speed spindle for saw blade 500 - 3,900 rpm (2.0 kW) - Clamping cylinder pneum. 2.000 N - Cutting range round solid material with HSS saw blade: 2-60 mm - Cutting range profiles solid material with HSS saw blade: 60x40 mm - Cutting range round pipe material with HSS saw blade: 2-70 mm - Cutting range profile material with HSS saw blade: 80x40 mm - Material feed carriage max. stroke: 1,250 mm Drive via gear wheel / gear rack - Clamping vice clamping: hydraulic - Minimum quantity lubrication - Saw blade dimensions: 100 - 200 mm (HSS or solid carbide) - Saw blade monitoring via load pick-up - Chip removal via external extraction possible - Material removal via retracting chute - Weight: 900 kg Accessories: ----- - Operating instructions - 3x sets of clamping jaws with drawings

Condition: new, capacity Ø 10 - 75 mm sawing motor 11 kW hydraulic motor 3 kW Saw Feeding Servo 1,5 KW Siemens Material Feeding Motor 1,5 KW Siemens Saw speed 70-160 rpm /min saw-blade dia. Ø285 x 2,0 x 1,7 x 32 mm cutting range min. 1000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 2950x6800 m weight of the machine ca. 3500 kg GERD WOLFF GLS-75 High-performance circular saw From 10 to 75 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine German with turkish mechanical engineering. Nedpfxotq Du Hj Abrown

Condition: good (used), Year of construction: 2008, Cutting range round Sawing capacity round 115 mm Max. Saw blade diameter Max. saw blade diameter 350 mm Cutting area rectangular Sawing capacity rectangular 200 x 70 mm Cutting area square Sawing capacity square 105 x 105 mm Sawing unit Sawing unit power 6.5/8 kw Saw shaft speed Speed on sawing shaft 1700/3400 rpm/rpm Maximum feed length Maximum feed length 9999 mm Shortest feed length Shortest feed length 10 mm Weight Weight 2300 kg Ausstattung / equipment: BEHRINGER SPS Steuerung / SPS Control Micro-Sprüheinrichtung / micro lubrication Controlled zero edge Nwedpfx Asrz Rw Rsbren Cutting gap extension Maschinenleuchte / machine light Vertikale Hauptspannung / vertical main clamping Rücklaufsperre / non-return-device Extraction system prepared - (basement extraction unit is not part of the delivery) Roller conveyor infeed approx. 5000 mm -roller conveyor infeed selfmade length 5000 mm

Condition: used, Year of construction: 1989, cutting diameter 260 mm serial number 109967 Nsdpfepxri Uox Abrewn volt 380 V frequency 50 Hz weight of the machine ca. 500 t

Condition: new, Year of construction: 2025, Fully automatic cutting of hardened and stainless steels with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of steel lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. Nedpfxsma Dfaj Abrjwn • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Automatic optimiser operation with input material laser length measure and auto-optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • In-line direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture Model: S200 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.