Gusania, UAB

Condition: like new (used), Year of construction: 2016, load capacity: 510 kg, arm reach: 3,080 mm, ROBOT ARM MANUFACTURER: KUKA MACHINE TYPE: KR510 3080 fortec Crodpfjztdbcox Aqljf TECHNICAL SPECIFICATIONS PAYLOAD: 510 kg REACH: 3080 mm CONTROLLER: KRC4 DELIVERY FROM GERMANY WAREHOUSE

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Crjdpfx Asztda Seqlsf Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1994, Clamping Unit: Clamping force: 7,000 kN Crsdpfx Aqoztda Eolef Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: good (used), FANUC 31i-B control system C-axis on both spindles Milling drive on the upper turret Milling drive on the lower turret B-axis on the upper turret: +/- 91° Y-axis on the upper turret: +/- 40 mm Y-axis on the lower turret: +/- 32.5 mm Larger main spindle: A5 Credpfoztdaxjx Aqlsf Bar diameter: 51 mm Larger counter spindle: A5 Bar diameter: 51 mm Polygon turning function Unloading with gripper hand on the upper turret Intelligent handwheel AME inclined bed filter system 10-70 bar

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler Csdpjztdarsfx Aqlsrf

Condition: good (used), Profile projector MITUTOYO PJ-A3000, with MITUTOYO QM-Data 200 control system. Crsdpfxsztdalj Aqljf

Condition: new, functionality: fully functional, empty load weight: 1,010 kg, maximum load weight: 2,490 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 3,640 mm, loading space width: 1,700 mm, loading space height: 400 mm, tire size: 13 Zoll, trailer brake: trailer braked, Year of construction: 2026, Martz Tipper 360/2 C S 3.5T Codpfxoztdafs Aqljrf NEW VEHICLE Internal dimensions: 364cm x 170cm Side wall height: 40cm Total weight: 3500kg Payload: 2490kg Braked tandem axle trailer Overrun brake and handbrake by AL-KO 2x 1800kg axle and brake Fully welded, hot-dip galvanized steel frame 40cm double-walled steel side walls Can be folded down and removed on all sides Floor made of 3mm galvanized steel Heavy-duty automatic jockey wheel with 500kg support load 8 lashing eyes with 600kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin plug Rear lamps with reversing light and triangular reflectors Large tipping angle of 50 degrees backwards Side tipping by repositioning the safety pins Electric tipping operation with plug for charging the 12V battery Main switch 12V Electric limitation of the tipping angle to the side Folding crank for rear support OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - Spare wheel with holder - Battery charger - Anti-theft device - Net, fine or coarse mesh - H-frame - Leaf grid in various heights, also closed - Extension side walls 40cm with tensioning fastener - Flat cover with or without rails - Loading ramps, steel or aluminum Further accessories available on request! Plus vehicle registration document and pre-carriage to Gera: €500.00 net Pictures are for illustrative purposes and may show optional accessories at an additional cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate collection. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. We offer a wide selection of rental trailers. Visit us online or come by!

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Cjdpfxoztc U Uj Aqljrf Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Crodpfxsztc U Is Aqlef Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Control system: SIEMENS 840D Turning diameter: 2,800 mm Turning height: 1,000 mm Load capacity: 16,000 kg Credpsztc Uzofx Aqlsf Max. turning diameter, approx.: 2,800 mm Turning diameter - external, max.: 2,800 mm Spindle speed: 63 min-1 Travel of the cross slide: 620 mm Ram stroke - max.: 690 mm ► INCLUDED Chip conveyor 4-position tool turret Hydraulic chuck: 2800 mm ► EQUIPMENT Tool holder CAPTO 6 Electric handwheel Retrofit in 2009 ► DESCRIPTION The machine is in very good condition and was used for hard turning of roller bearings. In 2009, the machine underwent a mechanical overhaul by Maschinenbau HELLWIG. As part of this general overhaul, the control system was also upgraded to a SIEMENS 840 Powerline.

Condition: like new (used), Year of construction: 2006, load capacity: 16 kg, arm reach: 1,611 mm, ROBOTIC ARM Cedpfeztc Uuex Aqlsrf

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Control system: SIEMENS 840D Machining diameter: 4,000 mm Machining height: 1,400 mm Travel distance of rotary table: 850 mm Max. turning diameter, approx.: 4,200 mm Turning diameter – external, max.: 4,000 mm Travel distance of cross slide: 850 mm Ram stroke – max.: 950 mm ► EQUIPMENT - Hydraulic chuck - Tool holder CAPTO 6 - Electric handwheel - Retrofit in 2007 ► INCLUDED Chip conveyor 4-position tool turret ► DESCRIPTION The machine is in very good condition and was used for hard turning of 4m cylindrical roller bearings. In 2007, the machine underwent mechanical overhaul by Maschinenbau HELLWIG. As part of this general overhaul, the control system was also upgraded to a SIEMENS 840 Powerline. Cedpfxeztc Unj Aqlerf

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Turning diameter: 3,000 mm Turning height: 500 mm Z-axis travel, left support: 551 mm Z-axis travel, right support: 350 mm X-axis travel: 1,100 mm Crodpjztc Uhofx Aqljf Spindle speed, left/right: 2,000 rpm Max. table load: 6,000 kg 2x grinding supports – swiveling 2x diamond dressing tools Magnetic clamping plate by SAV Control system updated in 2004 Control system: R&D

Condition: good (used), SCHAUBLIN 102 lathe, serial number 258639, securely mounted on a workbench (wooden work surface, metal frame, drawer, hinged door, 2 shelves), belt drive. Csdpfeztc Ubox Aqlerf

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Machining diameter: 4,200 mm Machining height: 550 mm Diameter of magnetic chuck: 4,000 mm Max. rotational speed of rotary table: 13 min-1 Control system: SIEMENS SINUMERIK 840D PL ► RIGHT GRINDING HEAD Swiveling range, external: 50° Swiveling range, internal: 47° Max. grinding wheel diameter: 610 mm Max. grinding wheel height: 255 mm Max. workpiece height: 550 mm Travel - X: 2,820 mm Travel - Z: 820 mm Rapid traverse X + Z axes: 10,000 mm/min ► LEFT GRINDING HEAD Max. grinding wheel diameter: 610 mm Max. grinding wheel height: 255 mm Max. workpiece height: 540 mm Travel - U: 2,870 mm Travel - W: 790 mm Rapid traverse U + W axes: 10,000 mm/min ► GRINDING WHEEL MAGAZINE Right magazine: quantity: 5 Left magazine, quantity: 4 ► DIMENSIONS AND WEIGHTS Operating platform height: approx. 2,605 mm Crodjztc T Rspfx Aqlof Machine weight: approx. 143,000 kg Machine dimensions (L x W x H): approx. 13,400 x 8,945 x 4,250 mm ► ACCESSORIES - Automatic grinding wheel changer, left side (4 wheels) & right side (5 wheels) - Automatic dressing unit for both grinding heads, MARPOSS P7 - Various grinding wheels and arbors - Oil mist emulsion extraction system - Automatic balancing device - Hydrostatic guide in all machining axes ► DESCRIPTION The machine is in exceptionally good condition and was used exclusively for the highly precise final machining of large bearings for offshore wind turbines. The machining operations included grinding the inner and outer diameters as well as the highly precise raceways of the roller bearings. The machining results achieved demonstrate the machine's exceptional performance. Inner and outer diameters with a workpiece diameter of up to 4,000 mm were ground within a tolerance of ±20 µm. A profile accuracy of 2–3 µm was achieved for the raceways.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Working diameter: 4,000 mm Csdpfsztc T Djx Aqlorf Working height: 730 mm X-axis: 1,110 mm Control system: SIMATIC S7-300 Tool holder: Grinding segments Integrated dressing unit on the grinding head In 2010, the machine underwent a comprehensive mechanical and electrical overhaul. As part of this modernization, the entire automation and drive technology was converted to Siemens technology. The machine is equipped with a MARPOSS P7 in-process measuring system. The measuring system is fully integrated into the Siemens SIMATIC S7-300 PLC control system via PROFIBUS.

Condition: reconditioned (used), functionality: fully functional, working width: 430 mm, overall weight: 33 kg, warranty duration: 12 months, HAKO CLEANSERV SD 43/180 SINGLE DISC SCRUBBER The 430mm cleaning head is equipped with a new medium-hard brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The powerful centrally located motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 430 Rotation speed (rpm/min): 180 Power consumption (W): 1200 Weight (kg): 33 Cable length (m): 12 INCLUDED: NEW 430mm PPL 0.5 disc brush 5 liters of TENZI NORMAL fluid - FREE Cjdsztc Twopfx Aqljrf KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: excellent (used), mileage: 733,472 km, power: 338 kW (459.55 HP), first registration: 02/2001, fuel type: diesel, tire condition: 50 %, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 9,000 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 2001, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, = Additional options and accessories = - 1 fuel tank - 1 sleeping place Crjdeztc Tqepfx Aqlef - Airbag - Armrest - Front suspension: Leaf - Hydraulics - Open roof - PTO - Rear suspension: Leaf - Sleeper cabin - Sper - Tipping hydraulics = More information = Tyre profile: 50% Brakes: disc brakes Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Differential lock Rear axle 2: Double wheels Technical condition: very good Visual appearance: very good

Condition: good (used), Year of construction: 2001, Steady rest in good condition, today's new price 55.000,- EUR span range max.: 400 mm span range min.: 50mm Crsdpfxsztc Tke Aqljf steady rest width: 170 mm steady rest height: 730 mm

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Peeler Table / Deflector Roll Csdpfeztc Tdjx Aqlerf Newcor Strip Welder with Planishing 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Edge Guides Andritz Slitter Head New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics

Condition: good (used), Year of construction: 2007, Turning center GILDEMEISTER/DMG Sprint 42 linear with DMG FANUC 160 control, serial number 2601-0386, year of manufacture 2007, operating hours estimated by management at approximately 41,295 hours, chip conveyor, bar feeder FMB Turbo 5-55. Credpfx Aeztc Sysqlsf

Condition: new, functionality: fully functional, empty load weight: 155 kg, maximum load weight: 595 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,300 mm, loading space width: 1,550 mm, trailer brake: trailer unbraked, Year of construction: 2026, MARTZ GP 2 Premium NEW VEHICLE Internal dimensions: 230cm x 155cm Total weight: 750 kg Payload: 581 kg Unbraked, single-axle flatbed trailer Bolted and galvanized steel frame Folding loading platform 13-pole electrical system Cjdeztc Stspfx Aqljrf Plastic mudguards Support wheel 13-inch M+S tires 2x motorcycle stands Ramp Numerous lashing points Front marker light Rear lights with reversing light and triangular reflectors Optional accessories: - 100 km/h upgrade - Rear supports - Spare wheel with bracket - Silk-screen printed wooden floor - Aluminum floor - Tool box More accessories available upon request! Images are examples and may show optional accessories that incur an extra charge. Plus vehicle registration document and transport to Gera: €100 net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pickup. The workshop is open from 8:00 a.m. to 5:00 p.m. on weekdays for all types of repairs. Specialist in axle repairs, also for caravans. Ijbquowvi Ehopd Nfean Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: good (used), Year of construction: 2018, TSUGAMI B0206E-III multi-axis automatic lathe with FANUC 32i Model B control, serial number 22024A, year of manufacture 2018, operating hours estimated at approximately 12,457 hours according to management, chip conveyor, bar feeder LNS Alpha ST320 S3. Cedpfsztc Smsx Aqljrf

Condition: excellent (used), Fully automatic filling machine, De Vree V 156 Filling capacity: 1-20 liters Automatic cap feeder Automatic cap closer In very good condition, directly from production!!! Cedpfx Aoztc Sgoqlorf

Condition: ready for operation (used), Year of construction: 2004, Edgebander manufactured in 2004. This BRANDT KDF 560 features automatic unit adjustment via PC control and is suitable for thin and thick edging, accommodating edge thicknesses from 0.4 to 8 mm and workpiece heights of 8 to 50 mm. It includes various installed units such as a pre-milling unit, glue application unit, and polishing units. If you are looking to get high-quality edging capabilities, consider the BRANDT KDF 560 machine we have for sale. Contact us for further details. • Type of drive: 400 V / 50 Hz / 3-phase • Main electronic connection: 400 V / 50 Hz / 3-phase • Power consumption: 13.2 kW • Used edge banding machine • Year of manufacture: 2004 • Fuse rating: 35 A • Automatic unit adjustment via PC control • Suitable for thin and thick edging (ABS, PVC, veneer, and solid wood edging) • Edge thickness: approx. 0.4 to 8 mm • Workpiece height: approx. 8 to 50 mm • Pre-milling unit • Glue application unit (hot melt) • Pressure zone with pressure rollers • Crosscut saw • Flush/radius milling units (top and bottom) • Corner rounding unit Crjdpfx Aqoztc Saelef • Radius scraper • Glue scraper • Polishing units • The technical data and descriptions are copies of the original order confirmation • The information is provided for informational purposes only and is not binding