Schmiedemeister Bernd Bauer

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control: SIEMENS 840D Solution Line (electrical overhaul 2017) x-travel: 7.000 mm y-travel: 2.100 mm z-travel: 1.500 mm z-travel vertical: 1.200 mm Universal milling head (orthogonal design) Swivel range of milling head holder: 340 °Grad Swivel range of milling head: 180 °Grad Mounting cone for tools with steep taper: SK50 spindle truning speed range: 22 - 2.240 U/min Feed rate x,y and z-axis: 2 - 12.000 mm/min Lrsdpsxphm Uefx Af Eou Rapid traverse rate x,y, and z-axis: 12.000 mm/min Drive power 100% ED / 60 % ED: 31,5 / 39 kW Clamping plate dimensions of clamping plate: 6.000 x 1.500 x 300 mm Number of T-slots: 6 T-slot distance: 250 mm max. load: 10 t/m² Equipped with: NC dividing head PEISELER AWU 650 with vertical faceplate, diameter 650 mm automatic universal milling head, orthogonal, (Completely refurbished 2017, rarely used since then) SIEMENS electronic handwheel 3 support tables various prism support blocks MAYFRAN hinged belt conveyor Coolant system with paper belt filter Work platform moving in the X direction, protective cover with viewing window The machine is in exceptionally good condition and can be viewed while under power. In 2017, a new SIEMENS 840D Solution line control system was installed, all drive motors and the control cabinet were replaced at the same time.

Condition: used, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 475 mm, overall weight: 1,850 kg, table length: 1,100 mm, table width: 250 mm, Spindle taper: ISO 40 RPM.: 35-1800 (variable) Travel: X750 Y280 Z475 mm. Table size: 1100 x 250 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 5 HP. Digital readout: Heidenhain Positip 850 (X, Y & Z) Lsdpfxoxpfy Ej Af Eeru Country of origin: Spain. Size (L x W x H): 1850 x 2100 x 2000 mm. Weight: 1850 kg. Variable speed with digital readout in 2 gear ranges, variable feed speed with digital readout, work ligth and 3-axis Heidenhain digital readout. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 1987, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 450 mm, overall weight: 2,300 kg, table length: 1,300 mm, table width: 280 mm, power: 3.7 kW (5.03 HP), Spindle taper: ISO 40 RPM.: 85-1300. Lrodexpftfepfx Af Eeu Travel: X1000 Y315 Z450 mm. Table size: 1300 x 280 mm. Automatic feed: X & Y Rapid speed: X, Y & Z. Motor: 3,7 kW. Digital readout: Newall DP 700 (X, Y & Z). Year: 1987 Country of origin: Taiwan. Size (L x W x H): 1650 x 2100 x 2000 mm. Weight: 2300 kg. All our machines are tested and serviced before delivery.

Condition: used, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 8 rpm, overall weight: 3,850 kg, Spindle taper: ISO 40 Lredpfxsxn R U So Af Eeu RPM.: 8-1200. Travel: X1500 Y700 Z500 mm. Table size: 2000 x 420 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Country of origin: France. Size (L x W x H): 2000 x 2200 x 1700 mm. Weight: 3850 kg. Rapid speed, and automatic feed in X, Y & Z. With vice. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 35 rpm, overall weight: 2,600 kg, table length: 1,525 mm, table width: 325 mm, Spindle taper: ISO 50 Lrsdpfxjxn R Tnj Af Eou RPM.: 35-1800 variable. Travel: X1050 Y330 Z475 mm. Table size: 1525 x 325 mm. Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 5,5 kW. Digital readout: Fagor Innova (Z). Year: 2002 Country of origin: Spain. Size (L x W x H): 2400 x 2500 x 2200 mm. Weight: 2600 kg. Variable speed in 2 gears. All our machines are tested and serviced before delivery.

Condition: ready for operation (used), functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, rotational speed (max.): 2,900 rpm, rotational speed (min.): 100 rpm, spindle mount: MK 3, type of input current: three-phase, overall weight: 260 kg, table length: 560 mm, table width: 250 mm, 3-phase 380V, 2-speed motor is running perfectly! Spindle RPM adjustable from 100 up to 2900. Geared head. 115mm drilling depth. MT3 spindle taper. Head adjustable in height and angle. Coolant pump in base. Cross table in good condition. Table dimensions: 560x250mm Made in Sweden! Ledpfxsxnvrvo Af Ejru Overall dimensions: 100x75x170cm Includes all accessories shown in the pictures. Contact us for shipping options! €2,800.00 EX VAT!

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 320 mm z-travel 450 mm Control Haidenhain TNC 124 drive of main spindle 3 kW number of spindle speeds 63-3150 u/min tool taper SK 40 stroke of quill vertical 60 mm feed speeds 5-2000 mm/min rapid traverse 2 m/min Lredpfxexndahj Af Eju work table: 800x320 mm coolant 20 l/min total power requirement 5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,2x2,4x1,6 m

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, feed length X-axis: 350 mm, travel distance X-axis: 6,500 mm, rapid traverse Z-axis: 350 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 1,000 rpm, overall weight: 4,500 kg, working range: 6,500 mm, spindle motor power: 7 W, Headline Options: - Boost Your Production with the Refurbished NEXUS REV 8000 4-Axis CNC Machining Center! - Precision & Power: The Ultimate 4-Axis CNC Solution for Aluminum Doors & Windows Lodsxfqg Njpfx Af Esru - Maximize Efficiency: High-Speed, Double-Station CNC Machining Center Key Selling Points (Short & Punchy): - 4-Axis CNC Power: Machine complex profiles from the top and all angles (±90°) with incredible precision. - High-Speed Spindle: 7.5 kW spindle reaching 24,000 rpm for fast, clean cuts even on thick profiles. - Double-Station Design: Two independent 6.5-meter workstations for non-stop productivity—machine one profile while setting up the next. - Exceptional Accuracy: Advanced gantry system with dual servo motors ensures perfect alignment and vibration-free operation. - Smart Tool Management: 8-position automatic tool magazine handles tools from 1 mm up to 300 mm disc cutters. - Plug-and-Play Software: Included UNILINK CAD-CAM software streamlines operation from design (DXF) to finished part with automatic tool and clamp management. - Fully Refurbished & Guaranteed: Completely overhauled by NEXUS TECHNICA experts, backed by a 6-month warranty and full future support. Technical Highlights for the Ad: - Work Envelope (X, Y, Z): 6,500 mm x 350 mm x 350 mm (Double Station) - Spindle: 7.5 kW, 24,000 rpm - Control: Advanced CNC with movable terminal (PC, keyboard, mouse included) - Tool Magazine: 8 positions (handles large disc cutters) - Clamping: 10 manually positioned pneumatic clamps (automatic positioning optional) - Software: UNILINK 3D CAD-CAM software - Condition: Professionally refurbished and modernized Ideal For: - Manufacturers of aluminum windows, doors, and sliding systems - Companies working with long aluminum profiles - Businesses aiming to automate and boost production capacity Call to Action: Ready to revolutionize your profile machining? Contact us today for more information and to arrange a viewing!

Condition: excellent (used), Year of construction: 1983, x-travel 450 mm y-travel 200 mm Ljdpfxoxdnple Af Ejru z-travel 465 mm total power requirement 2,6 kW weight of the machine ca. 1.2 t

Condition: used, functionality: fully functional, spindle speed (max.): 2,900 rpm, spindle speed (min.): 100 rpm, total height: 1,700 mm, total length: 1,000 mm, total width: 750 mm, spindle mount: MK 3, type of input current: three-phase, table length: 560 mm, table width: 250 mm, 3 Phase 380V, 2-speed motor is running fine! Geared head with 8 spindle speeds. Spindle RPM adjustable from 100 up to 2900. Drilling & milling possible. Table size: 560x250mm MT3 spindle taper. Head height adjustable. Lrjdpfjxdb T Dox Af Eeu Head can be angled. Maximum drilling depth: 115mm Made in Sweden. Overall dimensions: 100x75x170cm Weight: 260KG – Return spring is not functioning properly. Contact us for shipping possibilities! € 2.850,00

Condition: reconditioned (used), Year of construction: 1999, Universal Tool Milling Machine TOS FNGJ 32 3-axis Heidenhain digital readout Year of manufacture: 1999 Travel: X 600 Y 400 Z 400 mm Spindle speed range: 40 – 2000 rpm Lrsdsxc It Iopfx Af Eju Supplied with the following accessories: Fixed angle table, 800 x 400 mm clamping surface Vertical milling head Extendable quill Various SK 40 tool holders Safety guard Chip tray Machine lamp Automatic central lubrication pump for X, Y, Z axes Coolant system 4 machine leveling pads

Condition: used, Milling machine DUFOUR 61 Ledpfx Ajxbt Eajf Ejru

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 220 mm, travel distance Y-axis: 400 mm, spindle speed (max.): 3,800 rpm, spindle speed (min.): 85 rpm, total height: 1,800 mm, total length: 1,100 mm, total width: 1,050 mm, type of input current: three-phase, table width: 780 mm, 3 Phase 380V motor is running fine! Stepless speed adjustment due to the variomatic spindle drive. Spindle RPM adjustable from 85 up to 3800. Large cross table in very good condition! Table size: 780x300mm Adjustable drilling depth. Maximum drilling depth: 130mm Head is height adjustable and can swing left & right. Maximum distance between table and spindle: 430mm Travel X axis: 220mm Travel Y axis: 400mm ISO 30 spindle taper. Lrjdpfew Th S Tox Af Eju Overall dimensions: 110x105x180cm Includes accessories as shown in the pictures next to the machine. Contact us for shipping options! € 2,400.00 EX VAT

Condition: good (used), Year of construction: 2003, 🔧 FOR SALE – DEBER MDM6 Milling Machine 🔧 📍 Immediately available: a machine in excellent condition, ready to join your workshop! 📌 Main features: ✅ Brand: DEBER ✅ Type: milling machine ✅ CNC: SELCA ✅ Model: MDM6 ✅ X-axis travel: 6,000 mm ✅ Y-axis travel: 1,000 mm ✅ Z-axis travel: 2,200 mm ✅ Table dimensions: 7,000 x 1,500 x 330 mm ✅ Spindle: ISO 50 – 28 kW ✅ Chip conveyor Ledpfjw Hy Dcjx Af Eeru ✅ Automatic head TA2 ✅ Year: 2003 📸 See photo below (machine can be inspected on site) 📦 Condition: Very good 💰 Price: on request 👉 Please do not hesitate to contact us for more technical information, additional photos, or to arrange a viewing.

Condition: excellent (used), Year of construction: 2021, Manufacturer: Emerson Macchine Torino Model: Carrera 700 Year of manufacture: 2021 Specification: Table size: 1,320 x 320 mm • X - Y travel: 1,000 x 290 mm • Z table travel: 400 mm • Spindle-to-table distance: 140 - 540 mm • Spindle-to-column distance: 200 - 550 mm • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M16 • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2 / 1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard equipment: • Automatic tool screwdriver • Gearbox • Horizontal spindle • Automatic feed on axes • Automatic quill feed • Cooling unit • Lamp Main features: • Three-axis digital readout (Z with head movement) • Tapping attachment (reverse unit) Lrsdpfxjw Ew Dwe Af Eou • Table guard Accessories: Documentation Tool Please submit inquiries by email only. All information provided to the best of our knowledge. Subject to error. This offer is directed exclusively to businesses within the meaning of § 14 BGB. Sale is made excluding any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller, or for injury to life, body, or health. For further information, please refer to the Witzenmann GmbH website under the keywords "Impressum", "AGB" and "Datenschutz".

Condition: excellent (used), functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, spindle speed (max.): 3,000 rpm, table length: 4,000 mm, table width: 1,000 mm, CNC ECS 2301 (with the possibility of retrofitting) SPINDLE ISO 50 DIN 2080 taper AC motor: 28 kW (S1/100%) Constant torque from 0 to 250 rpm Constant power from 250 to 3.000 rpm Two automatic ranges TABLE (X-axis) Length 4.000 mm Width 1.000 mm Travel 4.000 mm Number of T-slots: 7 Width of slots: 18 mm Ledpfx Aew Axmnef Ejru Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' HEAD (Y-axis RAM) Y-axis travel 1.000 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' VERTICAL CARRIAGE (Z-axis) Z-axis travel 1.500 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' COLUMN (W-axis) W-axis travel mm 1.300 Working feed mm/1' 0 – 8.000 Rapid feed mm/1' - 15.000 ACCESSORIES: 40-position tool magazine

Condition: excellent (used), Universal milling machine SK 40 Table size 1300 x 300 mm X travel 750 mm Y travel 250 mm Z vertical travel 450 mm Ljdpfx Afjwxu Nws Eeru Spindle mount vertical SK 40 horizontal SK 40

Condition: ready for operation (used), Year of construction: 2002, 1 GOGLIO MX 60 moving column milling machine from 2002 CNC SELCA 4045D X 6000 Z 1800 Y 1100 Lrsdpfxewxacvs Af Eeu Fixed table 6000 x 2000 Automatic head 1°X 3° Speed 3000 rpm - 24 kW Through-spindle coolant 20 bar ATC 40 tools ISO 50 Chip conveyor Still in operation at the customer

Condition: good (used), 🔧 FOR SALE – BORING MACHINE GRAFFENSTADEN PRA 731 🔧 📍 Available immediately: a machine in perfect condition, ready to be added to your workshop! 📌 Main Features: ✅ Brand: GRAFFENSTADEN ✅ Type: CNC BORING MACHINE ✅ Model: PRA 731 ✅ CNC : NUM 760 ✅ X-axis travel: 1 800 mm ✅ Y-axis travel: 1 200 mm ✅ Z-axis travel: 700 mm ✅ Table :1400 x 1600 mm ✅ Permissible weight : 8t ✅ Spindle: 105mm - ISO 50 - 1450rpm - 800mm stroke - spindle cooler ✅ Machine in very good condition 📸 See the real photo below (machine can be viewed on site) 📦 Condition: Very good 💰 Price: on request 👉 Feel free to contact us for more technical information, additional photos or a visit. Lsdpfxjww Hl Is Af Esru

Condition: used, x-travel 600 mm y-travel 400 mm Ljdpfx Afjwqrxmo Ejru z-travel 500 mm total power requirement 6 kW

Condition: used, Year of construction: 2006, x-travel 320 mm y-travel 240 mm z-travel 300 mm total power requirement 3 kW weight of the machine ca. 1 t Lrsdpfx Aswp S Sdef Eou

Condition: repair required (used), Year of construction: 1996, functionality: not functional, machine/vehicle number: 340547, travel distance X-axis: 400 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, quill stroke: 60 mm, overall weight: 1,300 kg, table length: 650 mm, workpiece weight (max.): 250 kg, table width: 350 mm, power: 10 kW (13.60 HP), controller model: TNC 124, Equipment: rotational speed infinitely variable, The milling machine advertised is being sold as defective. The reported error: Gross positioning error on the Z-axis. The machine is otherwise in good condition and was used exclusively for training purposes. The following parts were newly installed by the service department: -Supply module -Z-axis assembly with brake -Z-axis position measuring system - Wipers on all axes - Filter mats -Synchronous belts -X-axis position measuring system - Signal converter for the measuring system The total cost for maintenance and repairs was €15,000. Lrjdjwlqtfopfx Af Eju The error is still present. Due to the age of the machine and the modernization of the workshop, repairs have been discontinued. You are welcome to inspect the machine. All information is provided without any warranty.

Condition: used, Year of construction: 1990, Motor output 5 kW Weight 1.500 kg Ljdpfowgnz Nox Af Eoru Control cnc

Condition: ready for operation (used), machine/vehicle number: SH-1206, Hölzer LOW mini depanelling machine for asle. Serviced, ready to go. Including PC software to generate machine program. Lrodpfjwd Spxex Af Esu Excellent condition. KVMS is the authorised representative for Hölzer in Belgium. So you can reply on the quality. System is complete with Nilfisk EX safe exhaust system.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 410 mm, spindle speed (max.): 2,400 rpm, spindle speed (min.): 120 rpm, type of input current: three-phase, table length: 670 mm, table width: 300 mm, Sixis S-103-R 3 Phase 380v motor runs fine. 9 Spindle speeds adjustable from 120 up to 2400 RPM. Power feed on the X & Z axis. Stepless adjustable feed rate. Axis travel: X: 450mm Y: 170mm Z: 410mm Table can also slide over the apron. Table size: 670x300mm Head is under degree adjustable. Lrjdpewbkpfofx Af Esu ISO30 Spindle intake. Coolant pump in machine base. Overall dimensions: 115x110x150cm Swiss made machine tool. Include's accessories as shown on pictures! Contact us for shipping options! €4,750.00