Eterix Sweden AB

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Blsdpfxezikcfs Adroi Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Bodszikb Ujpfx Adroli Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Deflection): 1% Full Deflection: 1.0 ms 10% Full Deflection: 4.5 ms Accuracy: Repeatability (RMS): < 4 µrad Max. Positioning Resolution: 18 Bit for XY, 16 Bit for Z* Nonlinearity: < 2.1 mrad / 44° 8-hr Drift (after 30 min): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Power Supply: (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan Axes: 3-axis system with integrated varioSCAN Housing Variants: Scan head Connector Positions: Opposite to beam exit Weight without Lens (standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Technical data subject to change. Information may contain errors!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. For further questions, we will be happy to assist you by phone.

Year of construction: 2026, condition: new, Technical specifications: Demonstration machine Pipe segment turning device for welding pipe bends in long pipeline sections Load capacity: 5 tons Pipe diameter: 150 – 920 mm Turning speed: 100 – 1000 mm/min. Frequency inverter: DANFOSS Bledpfx Adozid Riorsi CE marking Dimensions (length x width x height): approx. 1550 x 500 x 2580 mm Note: If required, a boom with a submerged arc welding head or for MIG welding processes can be added (at an extra cost). Warranty: 12 months The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2008, condition: ready for operation (used), Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible. Bjdpfxezhnucs Adrjli

Condition: used, Welding Rotator SARAZIN type HD 100 Blsdpfx Ajzg Hvpodrji Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Height in horizontal position: 1700 mm Weight: approx 4 T

Year of construction: 2020, condition: ready for operation (used), A mobile welding fume extraction unit is offered. Max. air volume flow: 3000m³/h, max. pressure: 3000Pa, motor power: 1.5kW, separation efficiency: >=99%, noise level: approx. 70dB(A), filter cleaning: automatically shaken off, filter type: washable filter cartridges, control system: digital control with display. Equipped with filtoo mobile extraction unit, year of manufacture 2022, incl. 3000mm extraction arm, spark protection screen. Inspection possible by appointment. Bsdpfx Adjzgwy Ejrsli

Condition: excellent (used), Tucker Nimak MF180: Robotic welding tongs for single-sided resistance spot welding The robotic welding tongs for single-sided resistance spot welding from NIMAK utilize state-of-the-art medium-frequency transformers, a control system with adaptive welding current regulation, and finely adjustable welding cylinders for gentle power. Bljdpfxozgcm Rj Adrsi Here, the right amount of force is crucial to reliably join materials without deforming them or leaving marks on the visible side. Our systems master this task perfectly. Tucker Stanley Punch Riveting Tool, C-Frame With the Tucker® SPR equipment, you can join materials that cannot be easily welded, including aluminum-aluminum, aluminum-steel, and high-strength steel, by combining two technologies in a modular system: punch riveting with semi-hollow rivets and solid punch rivets. AEG SVS Welding Technology Electrode Grinding Device EF310-01E-S-D-Fix Grinding of spot welding electrodes Automatic rivet feed With controller: The brain of every SPR system. It manages, thinks, remembers, and communicates in an Industry 4.0 environment. The lung – small, quiet, and fast rivet feed for your SPR tool. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Year of construction: 2019, condition: ready for operation (used), overall weight: 300 kg, total width: 730 mm, total height: 1,585 mm, laser power: 300 W, This 3-axis ALPHA LASER ALM 300 was manufactured in 2019. It features a powerful Nd:YAG laser with an average power of 300 W and a peak pulse power of 9 kW. The movement range is 120 × 110 × 800 mm, allowing for versatile applications. If you are looking to get high-quality laser welding capabilities, consider the ALPHA LASER ALM 300 machine we have for sale. Contact us for further details. • Laser type / wavelength: Nd:YAG, 1,064 nm • Operating mode: Pulsed • Average power: 300 W • Peak pulse power: 9 kW • Pulse energy: 90 J • Pulse duration: 0.5–20 ms • Pulse frequency: Single pulse up to 100 Hz • Welding spot diameter: 0.2–2.0 mm • Focusing objective: 150 mm (further lenses per lens data sheet) • Work area / axes: • Movement speed (X/Y/Z): 0–25 mm/s • Movement range (X/Y/Z): 120 × 110 × 800 mm • Lowest working point: 530 mm • Highest working point: 1590 mm Bedpfx Aezf A Ifjdrsli • Arm deflection: 1300 mm • Observation lens / ergonomics: Microscope attachment with eyepieces for glasses wearers 10× • Electrical connection: 3 × 400 V / 50–60 Hz / 3 × 16 A • Condition: Demo/showroom use only; excellent technical and visual condition

Year of construction: 2020, condition: ready for operation (used), A handheld fiber laser welding machine Sitolaser with a Reycus laser source is available. Laser power: 1000W, cooling: water, welding capacity steel/copper/aluminum: 4mm/2mm/2mm, min. sheet thickness: 0.2mm, wavelength: 1080nm. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1200mm, weight: approx. 250kg. Including various copper nozzles, spare lenses and heavy-duty casters for mobility. The item is a demonstration unit with few operating hours. Documentation available. An on-site inspection is possible. Bodpfx Aezfaaredrjli

Condition: excellent (used), Here, we offer you a Ytterbium fiber laser. Blsdpfozd Rinsx Adroi The LSS5 M laser welding tongs complement the product series as a compact welding tool. With laser powers ranging from one to four kilowatts, integrated cooling technology, and a user-friendly control unit, this combined welding and clamping tool is an ideal tool for welding high-strength steels, galvanized sheet metal pairings, or aluminum. Trifocal technology 3500W laser tongs Controller 3F Operating mode CW/Modulated Wavelength 1070 nm Laser power main beam 3.0kW Laser power secondary beams 2 × 0.25 kW Spot size (depending on fiber and optics), µm 250 – 600 Power requirement 3500 W laser power Laser duty cycle 30% (with cooler) 3.5 kW Dimensions, controller W × D × H, mm 608 × 808 × 1335 Weight 250 kg Lss-5M-3500-3F 400-460V AC 3P/PE 50/60Hz 32A/120k Type: Laser welding tongs LSS-5M-3500-3F Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have by phone.

Year of construction: 2014, condition: ready for operation (used), laser power: 260,000 W, Laser welding machine manufactured in 2014. This RONDA IMPIANTO CHIUSURA E SALDATURA LASER is designed for tube processing, currently configured for TIG welding and tack welding operations. It features a tube diameter range of 219 – 1,500 mm and a tube thickness of 3 – 12 mm. The machine operates with 8 pushers and is controlled from an external workstation. If you are looking to get high-quality welding capabilities, consider the RONDA IMPIANTO CHIUSURA E SALDATURA LASER machine we have for sale. Contact us for further details. • Current application: TIG welding / tack welding • Original application: Laser system (currently disabled) • Tube diameter capacity: 219 – 1,500 mm • Tube thickness capacity: 3 – 12 mm • Tube length capacity: 3,000 – 13,000 mm • Working system: 8 pushers (4 lateral + 4 upper) • Torch: TIG torch on front head • TIG wire diameter: 1.2 mm • Shielding gas: Argon • Machine control: External workstation with cycle start Bsdpfszdz Nxsx Adroli • Laser status: Laser element disabled in the current configuration Additional equipment • Former laser equipment available in stock: laser generator and extractor (can be included in the sale)

Condition: excellent (used), Ytterbium Fiber Laser Type: YLR-2400 S2-WW Description: Laser module (fiber laser IPG YLR-2400 S2-WW with cooling) Bledezdrw Hopfx Adrji Year of manufacture: 2017 Serial number: 7121450 Laser source 2.4 kW Laser structuring system, cooling unit KKW; without 3D scanning head and without laser spy sensors and cables. 400 VAC +/-10% 3P/PE 50/60 Hz 80A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Trumpf HAAS Type: HAAS Laser HL556D Wavelength of laser light: 1064nm Minimum power: 5 W Maximum regulated power: 550 W Beam parameter product: 25 mm-mrd External dimensions: Width 1250mm, Height 1580, Depth 720m Power cable with plug: Blsdpfxozdrwgj Adroi Length: 5.5 m Plug: CEE round plug, 5-pole 63A-6h Cooling water hoses: Connections for supply and return: 1 inch The hoses are connected to the connections and sealed with 2 hose clamps each. Electrical interfaces: Serial interfaces for service purposes Ethernet interface for operating PC Interface of the analog input card ASV interfaces for safety circuits Output for measured values of laser power Interface for connecting the control panel Emergency stop interface Electrical connection values: Mains 20-01-37-00 400 V ± 10 %, 3P + PE, 50 Hz 20-01-38-00 400 V ± 10 %, 3P + PE, 60 Hz Scope of supply: (Laser system, laser head and replacement cable…) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), CORIMPEX BEAM WELDING MACHINE TYPE BWM TC 2000-1000 3-15 machine. WEB : Height 200 -:- 2000mm (flanges included). Thickness 5 -:- 25mm FLANGE : Width 150 -1000mm Thickness 8-40mm Max. post-deforming thickness = 35 mm on 1000 mm flange width MAX. BEAM WEIGHT : 1000 Kg / metre MIN. BEAM LENGTH : 3000 mm MAX. BEAM LENGTH : 15.000 mm. HYDRAULIC CYLINDER : 1800 mm. TACK-WELDING : Not needed. POWERED ROLLS IN THE : speed = 12 m/min. ENTRY/EXIT CONVEYORS PISTON WORKING : 6/9 Tons. Bodpezc Rl Ujfx Adroli TRAVEL SPEED RANGE : 0,2 -:- 2,1 m/min WELDING PROCESS : submerged Arc Tandem.

Year of construction: 2017, condition: ready for operation (used), A CNC 5-axis hydro-abrasive waterjet cutting system C.M.S. Tecnocut is available. Working dimensions X/Y/Z: 3300mm/1705mm/150mm, table dimensions X/Y: 3700mm/2050mm, max. table load: 1000kg/m², rapid traverse: 40m/min, pump: CMS GreenJet Evo Electric, max. operating pressure: 4139bar, power: 34kW. Overall system dimensions X/Y/Z: approx. 5700mm/2550mm/3900mm, weight: approx. 11200kg, operating hours: approx. 1500h. The system is fully equipped except for a clamping unit for pipes. Documentation available. An on-site inspection is possible. Bjdpfx Adjzc Rc Toroli

Year of construction: 2007, condition: ready for operation (used), A Trumpf CNC 2D laser cutting machine is available. Laser type: CO2, laser source: Trumpf TruFlow 5000, laser power: 5000W, wavelength: 10.6µm, travel path X/Y/Z: 4000mm/2000mm/115mm, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, max. table load: 1250kg. Machine dimensions X/Y/Z: approx. 12000mm/5300mm/2400mm, weight: approx. 14000kg. Documentation available. An on-site inspection is possible. Bodpezcyrqefx Adreli

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, laser type: fiber laser, laser source manufacturer: Rofin, laser source model: FL40, laser power: 4,000 W, laser wavelength: 1,070 nm, input voltage: 400 V, input current: 40 A, input frequency: 60 Hz, type of input current: three-phase, We offer this Rofin FL40 laser welding machine in very good condition, manufactured in 2017. Nominal power: 4000 W Power range: 10 - 100% Laser beam quality: 3 - 4 (Multi Mode 100 µm) mm·mrad Power stability: ±2% Pulse frequency range: CW - 5 kHz Wavelength: 1070 ±10 nm Maximum possible power (950-1100 nm): 8000 W Maximum possible power (1100-1150 nm): ≤100 W Supply voltage: 3 x 230/400 V ±10% or 3 x 277/480 V ±10% Mains frequency: 50 or 60 Hz Apparent power at the beginning of module life: 12.7 kVA Active power at the beginning of module life: 11.8 kW Current consumption at 400 V at the beginning of module life: 18.4 / CCU: +0.5 A Apparent power at the end of module life: 15.2 kVA Active power at the end of module life: 14.2 kW Current consumption at 400 V at the end of module life: 22 / CCU: +0.5 A Blodpszcf T Tsfx Adrji Current consumption at 480 V at the end of module life: 18.3 / CCU: +0.5 A Fuses: 40 A If you have any questions or need further information, please do not hesitate to send us a message or call us.

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A Blsdpfx Adszbvn Eeroi output 36 kw compressed air 4,5 bar weight 3.200 kg In our assessment, the laser welding system is in like-new condition. Technical features: - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2023, condition: used, control Siemens Bedpfjzbvnfox Adreli voltage 400V 50 Hz V current intensivity 63 A In our assessment, the robotic welding system is in like-new condition. Technical Specifications: - MIG welding of individual components onto cooling plates using a robot - Automatic torch cleaning and wire cutting - 2-station rotary table for loading during the welding process - Siemens control system Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: S 10054, A professional, high-precision longitudinal seam welding machine designed specifically for the ventilation and ducting industry. The WAMMES SW 1250 provides airtight, high-strength overlapping stitch and continuous seam welds on round ducts and fittings, ensuring compliance with strict industrial leakage standards. Specifications: - Manufacturer: WAMMES Machining (Germany) - Model: SW 1250 - Application: High-efficiency stitch and continuous welding for ventilation ducts, chimneys, and round fittings. - Welding Length (Max): 1250 mm Bljdezbh Hyopfx Adrei - Material Thickness Range: Galvanized Steel: 0.4 mm – 1.0 mm (approx.) Stainless Steel: 0.4 mm – 0.8 mm (approx.) Key Features & Components: - Airtight Seam Quality: Engineered to deliver tight, consistent welds without damaging the zinc coating on galvanized sheets. - Robust Clamping System: Heavy-duty pneumatic or mechanical clamping bars hold the rolled cylinder perfectly in place for uniform seam alignment. - Adjustable Overlap: Allows for precise calibration of the joint overlap, minimizing material waste. - Industrial Control Panel: Simple, operator-friendly interface for adjusting welding speed, current, and stitch intervals. - Foot Pedal Operation: Facilitates safe, hands-free workpiece positioning and cycle activation. Condition & Availability - Status: Fully operational and in good working condition. - Ready for delivery

Year of construction: 2016, condition: used, machine/vehicle number: SN106552, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania Bodpfx Adeza T Hioroli The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: used, Year of construction: 2016, machine/vehicle number: 107198, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. Blodpjza T D Isfx Adrei You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: used, Year of construction: 2011, functionality: limited functionality, laser power: 6,000 W, laser source model: TruFlow 6000, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 6,000 W Laser source: TruFlow 6000 MACHINE DETAILS Connection power: 114 kVA Mains connection: 400 V Control voltage: 24 V Fusing: 200 A Compressed air connection: 6 - 14 bar Bedozaqzkspfx Adrjli Package dimensions Cabinet: 2600 x 800 x 1200 mm Laser head: 1200 x 1200 x 1200 mm Laser: 3000 x 1600 x 2800 mm 800 x 800 x 2000 mm 1400 x 1000 x 2000 mm 2 x 1200 x 800 x 2200 mm Note: The machine's dongle is defective.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: GN2.372.44.32, Schlatter roll seam welding machine, type no. GN2.372.44.32 Bsdpfxjy U Uz Ss Adroli Very well-maintained machine in good working order, with product cooling and extraction system. Complete documentation is available. See the photo of the type plate for all details. For more information, please contact Theo Ligtenberg.

Year of construction: 2007, condition: ready for operation (used), Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible. Blsdpsy U Nrfefx Adroi