Panzer Kenet Makinaları Ticaret Limited Şirketi

Condition: ready for operation (used), Year of construction: 1993, A Dreistern roll forming machine is offered. Main drive power: 9.2kW, production direction: right to left, roll shaft diameter: 30mm, roll shaft connection: 20mm, tooling width of roll stand type 1: 135mm, center distance of type 1: 130mm, adjustment range of type 1: 60mm-100mm, tooling width of roll stand type 2: 210mm, center distance of type 2: 260mm, adjustment range of type 2: 80mm-130mm, control system: Siemens SIMATIC HMI. The gearbox has been fully overhauled. Inspection by appointment is possible. Dedpfx Aszta Edsc Hjck

Condition: like new (used), Year of construction: 2026, operating hours: 12 h, functionality: fully functional, rollform line for elevator rails production Dcedpfx Aszry R Doc Hsk

Condition: new, Year of construction: 2026, Automatic Roll Forming Line for Light Gauge Steel Frame Production This automatic roll forming line is designed for manufacturing Light Gauge Steel (LGS) and Cold Formed Steel (CFS) structural profiles used for steel frame houses, modular buildings, commercial buildings and prefabricated construction systems. The production line automatically performs feeding, leveling, punching, roll forming, profile marking and hydraulic cutting according to digital production data. It is an ideal solution for manufacturers of: Dsdpfx Acszrt Ivo Hjck Light Gauge Steel structures Steel frame houses Prefabricated buildings Modular buildings Tiny houses Commercial steel structures Residential steel framing Cold formed steel construction systems Flexible Machine Configuration The roll forming line can be supplied in two different configurations depending on production requirements. Fixed Profile Machine Designed for manufacturers producing one profile size with maximum productivity and simplified machine setup. Multi-Profile Roll Forming Machine An adjustable roll forming system capable of producing several profile widths on one machine by changing the roll forming configuration. This solution provides greater production flexibility while reducing investment costs compared with purchasing multiple dedicated production lines. Complete Automatic Production Process The machine automatically performs the following operations: Coil feeding Strip leveling Servo punching Hole punching Slot punching Service hole punching Roll forming Profile identification marking Hydraulic cutting to length Finished profile discharge The production line is designed to work with professional steel frame design software. The operator imports production data generated from a building design into the machine control system. Based on this information the machine automatically manufactures every structural member including: wall studs tracks floor joists roof trusses rafters beams structural reinforcements Each component is produced with the correct length, punching pattern and identification marking required for final assembly. Automatic Profile Marking Each profile can be automatically marked during production. Typical marking information includes: Profile number Wall identification Member position Assembly reference Project identification Automatic marking significantly simplifies profile sorting and speeds up on-site assembly. Instead of manually identifying every component, installers receive a complete production kit with every profile clearly identified. Automatic Punching System All punching operations are synchronized with the roll forming process to achieve high accuracy and repeatability. Main Advantages Fully automatic production Computer controlled manufacturing Automatic profile marking Servo punching system Hydraulic cutting High dimensional accuracy Reduced material waste Fast production Flexible profile sizes Suitable for custom house projects Reduced manual labour Easy assembly thanks to profile identification Applications Technical Specifications Typical options include: Single-profile roll forming machine Multi-profile adjustable machine Automatic profile marking Servo punching Hydraulic cutting Automatic decoiler Hydraulic decoiler Computer control system Production management software compatibility

Condition: new, Year of construction: 2026, total width: 750 mm, total length: 2,900 mm, total height: 1,160 mm, warranty duration: 12 months, overall weight: 400 kg, Compact roll forming equipment for producing metal rainwater downpipes This portable roll forming machine is designed for the production of rectangular metal downspouts and rainwater downpipes from pre-painted or coated sheet steel. The machine progressively forms a flat metal strip into a finished rectangular profile suitable for residential, commercial and industrial rainwater drainage systems. The dimensions and geometry of the finished downpipe can be manufactured according to the customer’s technical requirements. The roll tooling is designed for a specific rectangular profile, taking into account the required width, height, corner shape, surface pattern, material thickness and connection type. The machine is suitable for manufacturers of: rectangular metal downspouts; rainwater downpipes; roof drainage systems; gutter and downspout components; roofing accessories; façade and sheet-metal products; custom cold-formed metal profiles. Its compact size and relatively low weight make it suitable for small workshops, roofing companies and production sites where a large stationary roll forming line is not required. Custom profile dimensions Dcedpfx Acozrnxcj Hok The finished profile is produced according to the customer’s drawing, sample or technical specification. The machine is therefore supplied as a custom rectangular downspout roll former, configured for the required finished product. The basic production process is: Decoiler → Roll forming system → Manual saw cutting Main advantages Compact and portable construction Custom tooling for the required downpipe size Production directly from coated sheet steel Suitable for pre-painted and galvanized material Gradual roll forming with controlled material deformation Low installed motor power Simple operation and maintenance Suitable for small-batch and regular production Finished products can be cut to the required length Reduced dependence on purchased ready-made downpipes Suitable for workshops with limited production space Material The standard configuration is designed for coated sheet steel with a thickness of approximately 0.4–0.5 mm. Depending on the agreed configuration, the machine may process: pre-painted steel; galvanized steel; polymer-coated sheet steel; other thin sheet-metal materials after technical approval. The exact material grade, tensile strength, thickness and coating must be specified before the roll tooling is designed. Technical specifications: Machine type Portable roll forming machine Finished product Rectangular metal downspout / downpipe Profile dimensions According to customer specification Material Coated sheet steel Material thickness Approx. 0.4–0.5 mm Forming speed Approx. 3–8 m/min Main motor power 3 kW Transmission Gear and sprocket drive Auxiliary forming elements Polyurethane wheels Cutting system Manual circular saw Machine dimensions Approx. 2860 × 730 × 1160 mm Machine weight Approx. 400 kg Electrical supply 380 V, 50 Hz, 3-phase* Compact machine design This makes it suitable for: roofing contractors; rainwater system manufacturers; sheet-metal workshops; gutter and downpipe producers; building component manufacturers; small and medium-sized production facilities; companies producing custom roofing accessories. Scope of supply A custom set of roll forming tools will then be designed for the required product.

Condition: excellent (used), We are offering a Schlebach RBM circular arc forming machine for pre-profiled blades, ready for immediate use. It is the “Porsche” among profiling machines. Djdpfx Acozq R Hgs Hsck Delivery is possible. For more information, please send me a WhatsApp message or call me. Net price plus VAT. An invoice with VAT shown is available.

Condition: excellent (used), We are selling a Schlebach EHA here. The machine is in perfect working order. Prices are net. Delivery is possible. You will receive an invoice with VAT shown separately. Dcodpfx Acszq R E No Hok

Condition: ready for operation (used), Year of construction: 1989, - USED - ROLL FORMING MACHINE STEPS: N. 20 WEIGHT: 25000 Kg OVERALL DIMENSIONS: 7300 x 2400 x 1500 mm Dodpezqwf Njfx Ac Hock NOTE: PROFILE: WIDTH FROM 85 mm TO 670 mm; LENGTH FROM 2000 TO 5000 mm; THICKNESS FROM 0,6 TO 1,5 mm IN AUTOMATIC; No 5 4-STEPS HEADS; FORMING LINE FOR CABLE TROUGHS AND CABLE TRAY COVERS PRODUCTION; EQUIPPED WITH LOADING/UNLOADING ROLLER CONVEYORS

Condition: excellent (used), Schlebach Mini Prof ☑️Immediately available, no delivery time☑️ ☑️Drive rollers have already been replaced☑️ Universal machine for the production of double standing seam profiles (25 mm) from sheet material, coils, or cut pieces in a single pass. The machine is equipped with: ✅Profiling rollers for 25 mm seam height ✅Rollers including transport handles for easy transport Dcedjzphfqopfx Ac Hsk ✅Bending capacity: 0.8 mm (zinc, aluminum & copper), 0.7 mm steel sheet Condition: • Very good technical condition • Very good visual condition • Weight: approx. 220 kg An inspection and test run are possible by arrangement.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: TEL-178600-558-98, working width: 1,250 mm, The production line was fully operational until it was dismantled. It was taken out of service solely due to a production upgrade/change in manufacturing technology. The machine is currently dismantled and prepared for transport; therefore, a live demonstration is not possible. Prior to dismantling, the line operated without any issues and was regularly maintained. Dsdpfszmzhmjx Ac Heck We offer two complete roll forming lines for sale, available either individually or as a package. Manufacturer: SAMESOR Year of manufacture: 1998 SERIAL: TEL-178600-558-98 Manufacturer: AJV-MACHINE Year of manufacture: 2006 SERIAL: AJV24/1100-169

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0630, type of input current: three-phase, input voltage: 400 V, coil weight: 6,000 kg, overall weight: 12,000 kg, Machine available immediately. We are offering a new TR32 trapezoidal roll forming machine. The machine is new and ready for collection. Type: TR32 Year of Manufacture: 2026 Serial Number: 0630 Weight: 12,000 kg Maximum power: 12 kW Supply voltage: 3x400 V Supply frequency: (50–60) Hz THE MACHINE INCLUDES: - Electric decoiler with manual tension release, manually operated, capacity Q=6,000 kg; - Sheet metal feed with circular (rotary) knives - Profiling unit - Electromechanical guillotine Dodpfezl A I Sex Ac Heck - 6-meter sheet metal stacker + 6-meter transport cart - Control cabinet - Safety guards If you have any questions or require additional information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 7 mm, total width: 1,700 mm, total length: 31,000 mm, total height: 2,000 mm, input voltage: 400 V, working width: 1,250 mm, coil weight: 5,000 kg, overall weight: 8,800 kg, T20 Trapezoidal Sheet Roll Forming Line for Sale * Model: T20 Trapezoidal Sheet Roll Forming Line * Year of Manufacture: 2018 * 5-ton hydraulic decoiler included Dsdpfx Aozhip Ioc Hjck * Automatic stacker at the end of the production line The machine has seen very little use and is in excellent working condition. It has been well maintained and is fully operational. The production line is currently dismantled, making it ready for transport. If you need any additional information, photos, or videos of the machine in operation, feel free to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 24 kW (32.63 HP), coil weight: 10,000 kg, overall weight: 12,000 kg, The machine is available for immediate delivery. We offer a new D23 sheet metal roofing profiling machine with a 3D shear. The machine is new and ready for pickup. Type: D23 Year of manufacture: 2026 Dedpfx Ajzfi Thjc Heck Serial number: 2502242007 Weight: 12,000 kg Maximum power: 24 kW Supply voltage: 3x400 V Supply frequency: (50÷60) Hz The machine consists of: Hydraulic unwinder, 10 tons + cross-over carriage, 10 tons; Sheet feeding system with rotary shears; Profiling section; Hydraulic press for embossing; 3D profiling shear for cutting; Sheet collector, 5 m + collection carriage; Control cabinet. If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1895, SWAH SLV-3 – Corner Insertion Machine A specialized, highly efficient pneumatic/electric machine designed for the automatic insertion and clamping of corner pieces into rectangular duct flanges (TDC/TDF/Slide-on profiles). Manufactured by the European specialist SWAH, the SLV-3 significantly speeds up the final assembly of rectangular ductwork while ensuring rigid, airtight joints. Specifications • Manufacturer: SWAH s.r.o. (Czech Republic) • Model / Typ: SLV-3 • Year of Manufacture: 2001 • Serial No.: 1895 • Application: Fast and automated press-fitting of metal corners into rectangular ventilation ducts. Dedpozbipvefx Ac Hjck • Voltage: 400 V • Current: 1.1 A • Machine Weight: 96 kg Key Features & Components • High-Speed Assembly: Eliminates manual hammering, allowing the operator to lock ventilation corners into the profile in seconds with consistent, high-quality results. • Heavy-Duty Pressing Mechanism: Delivers a secure, tight seal between the duct profile and the corner piece without deforming the sheet metal or damaging the zinc coating. Condition & Availability • Status: Fully operational and in good working condition. • Ready for delivery

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 56 kW (76.14 HP), coil weight: 10,000 kg, A high-performance profiling line (roll forming machine) T153 for the production of sheet metal profiles (153 mm) is for sale. Year of manufacture: 2022 Condition: Excellent (practically new equipment). The machine has only undergone minimal operation – it has processed a maximum of 50 tons of material. Main advantage: The line is completely set up, connected, and ready for immediate testing. You don’t have to wait months for delivery from the factory, nor spend large sums of money on commissioning and adjustment. The equipment is ready to be integrated into your production immediately! ⚙️ Technical specifications: Material thickness: 0.7 – 1.5 mm Line speed: 8 – 12 m/min (high productivity) Main motor: Powerful 18 kW x 2 drive Hydraulic unit motor: 5.5 kW Overall dimensions of the line: Length 50 m x Width 2 m x Height 1.2 m 📦 Complete line assembly: - Coil unwinder: Designed for heavy coils up to 10 tons, motor power – 11 kW. - Profiling machine T153: Main forming unit. - Automatic stacker: Length 12 m, power 4 kW (enables the automation of receiving and storing finished long products, which significantly reduces personnel costs). 🔥 Why this is a beneficial offer for your business: Minimal wear and tear: Processing only about 50 tons is considered test operation for machines of this class. You are buying a practically new machine at the price of a used one. Ready for testing: The equipment is currently connected. You can bring your own material, start the line, and personally verify the perfect geometry of the finished profile. Fast start: The machine is located directly in the Czech Republic, and it is ready for dismantling and shipment. No lengthy international paperwork or customs duties. 📍 Location: Hradec Králové, Czech Republic. Dcodpfxoy Uzzfo Ac Hjk Upon request, we will gladly provide additional photos and a video of the machine in operation. Call or write to inquire about the price, dismantling, and shipping conditions. We will be happy to answer all technical and organizational questions!

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Strip infeed basket with strip guide Driven feed, lower roller driven Upper roller adjustable manually Internal lateral strip guides Dcsdpfx Ajy Szlxjc Hsk 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Strip outfeed basket Scrap conveyor Wheel displacement for transferring material from the machine line to rollers Protective covers with safety interlocks Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. It operated flawlessly in production at the customer's plant until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other applications.

Condition: used, Original profiling frames with quick-change plates for Dreistern P3.100 profiling systems Profiling frame characteristics: Tool width of frame: 275 mm Working spindle diameter: 50 mm Working spindle connection: 30 mm with keyway Axial adjustment Adjustment range of working spindle: 80 - 170 mm Dodpfxjy Szgio Ac Hsck The following quantities are available: 44 pieces, fixed lower spindle 4 pieces, adjustable lower spindle Always mounted on 2- or 4-plate systems Price applies per frame stand and quick-change plate.

Condition: used, Rotary punching machine, model BRS, with accessories Production direction: left to right Strip infeed basket with strip guide Driven feed, driven lower roller Upper roller adjustable manually Internal lateral strip guides 2 rotary punches, numerous adjustment options Strip outfeed basket Scrap conveyor belt Wheel displacement for transferring material out of the production line to rolls Protective covers with safety interlocks Including punching tools Including control system and operating panel Including electrical documentation The machine was used to punch C-rails and hat sections from 2 mm sheet metal. Dodpjy Syivsfx Ac Hjck It operated flawlessly in the customer's production facility until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other equipment.

Condition: used, Original quick-change plates for Dreistern P3.125 profiling systems. Production direction: left to right. The following quantities and sizes are available: 3 pieces for 2 profiling frames (795x790) 3 pieces for 6 profiling frames (2385x790) Dsdpfx Acey Sxx As Hjck Some of the groove blocks are missing, but can be re-manufactured if required. Price per piece.

Condition: new, Year of construction: 2026, functionality: fully functional, HawkTech LC-5005 – Pittsburgh Lock Machine for HVAC Duct Fabrication Dedpfx Acjy Swnpo Hjck The LC-5005 forms the Pittsburgh lock seam on square and rectangular HVAC duct components. With 7 pairs of vertical forming shafts (each with left, middle, and right rolls), the profile is gradually formed, resulting in a clean and consistent seam. The upper section automatically adjusts to sheet thickness via a double-head stud and disc spring – no manual readjustment is needed during normal operation. Multiple lock profiles and combinations can be produced (Pittsburgh lock, drive cleat, and more). Compact and lightweight (360 kg) with a small footprint, the machine is easy to move, simple to adjust, and reliable – ideal for on-site duct fabrication as well as workshop use in industrial plants, hotels, and shopping centers. Technical data: Model: LC-5005 Motor power: 2.2 kW (Y100L1-4, three-phase) Voltage: 220 / 380 / 415 V (reversing switch QX1-13N1) Sheet thickness: 0.5 – 1.2 mm (drive cleat rolls: < 0.8 mm) Forming shafts: 7 pairs, 3 rolls each Dimensions (L × W × H): 1,520 × 630 × 1,010 mm Weight: 360 kg Scope of delivery: LC-5005 Pittsburgh lock machine Set of Allen keys (5, 6, 8, 10, 12 mm) Operating manual (CZ/EN) Quality certificate

Condition: used, Profiling machine Dreistern with accessories Machine bed features: Production direction: right to left Dcjdpfx Acey Sm Sdo Hok 18 stations, driveable 1 x 9.2 kW DC motor Profiling frames, Type 1: Tool width frame: 135 mm Working spindle diameter: 30 mm Working spindle connection: 20 mm with keyway Fixed lower spindle Axial adjustment Adjustment range lower spindle - upper spindle: 60 - 100 mm Axial distance: 130 mm Profiling frames, Type 2: Tool width frame: 210 mm Working spindle diameter: 30 mm Working spindle connection: 20 mm with keyway Fixed lower spindle Axial adjustment Adjustment range lower spindle - upper spindle: 80 - 130 mm Axial distance: 260 mm Scope of supply: Machine bed Strip welding device Infeed table Straightening device DC motor Control system with operating panel Electrical documentation 2 straightening roller holders 3 gearboxes 9 profiling frames, Type 1 8 profiling frames, Type 2 18 universal joints The machine operated flawlessly in the customer's factory until it was dismantled. Strip unwinder and perforating machines are also available from us as used machines. We can support you with the following when reassembling the system: Planning Mechanical overhaul Control system retrofit Painting Safety concept CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling line Dreistern P3.100 with mobile cut-off unit and accessories Machine bed features: Production direction: right to left Axle distance: 330 mm 48 stations 44 stations can be driven (44 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 1 x 42 kW Baumüller motor 1 x 15 kW Baumüller motor Profiling frame features: Tool width per frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft (6 pieces with adjustable lower shaft) Axial adjustment Adjustment range of lower/upper shaft: 80 - 170 mm Gearbox features: Worm gear ratio 1:21 Lower/upper shaft gear ratio 1:1 Mobile cut-off unit features: Travel distance: 1900 mm Profile rail guidance Ball screw drive Bosch servo motor Valve block with punching unit Folding table length: 3000 mm Emergency stop Scope of delivery: Machine bed with gearbox support Infeed table Measuring wheel unit, pneumatic Straightening device Strip filter unit 800 liters Hydraulic unit for separator 44 gearboxes 44 profiling frames 2 Baumüller DC motors Dedpfxjy Sm Eqe Ac Hjck 66 universal joints The system operated flawlessly in production until it was dismantled at the customer's facility. Control system not included. Strip unwinder and perforation unit are also available from us as used machines. The system can also be easily extended with additional stations. We can support you with the following when reassembling the system: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Roll Forming Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: right to left Centre distance between axes: 330 mm 22 stations 18 driven stations (18 gearboxes) Quick-change plates Mechanical quick release clamps Coolant and lubricant piping 2 x 18.5 kW Bosch motors Roll Forming Stands Features: Tool width per stand: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Dcsdsy Sm A Aopfx Ac Hok Adjustment range lower shaft to upper shaft (UW-OW): 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower shaft to upper shaft ratio (UW-OW): 1:1 Scope of Delivery: Machine bed with gearbox carrier Infeed table Measuring wheel unit, pneumatic Special straightening unit 18 gearboxes 18 forming stands 2 Bosch motors 36 drive shafts The machine was running flawlessly in production until it was dismantled at the customer's site. Control system is not included. Decoilers and punching units are also available as used machines. The line can be easily extended with additional stations. We can support you with the reassembly of the line, offering: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: left to right Center distance: 330 mm 18 stations 16 powered stations (16 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 2x 18.5 kW Bosch motors Profiling Frames Features: Tool width frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower to upper shaft: 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower to upper shaft ratio 1:1 Djdpfxsy Sm Apo Ac Heck Scope of Delivery: Machine bed with gearbox support Infeed table Measuring wheel unit, pneumatic Special straightening unit 16 gearboxes 16 profiling frames 2 Bosch motors 32 cardan shafts The machine was working flawlessly in production until dismantling at the customer's site. Control system not included. Coil decoilers and punching units are also available used. The line can easily be extended with additional stations. We can support you with reassembly of the line: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, Flying profile cutting machine for Dreistern P3.125 with accessories Production direction: left to right Travel distance: 2000 mm Aluminum carriage with shaft recirculating ball guide Height adjustment via hydraulic cylinder and wedges Dcsdpfjy Sldfox Ac Hok Disc spring clamping of height adjustment, hydraulically releasable Low-backlash Graessner gearbox with Rexroth servomotor Folding table: Roller guide Hydraulically folding Rollers recessed in the table Dimensions: 380 x 6200 mm Accessories: 7.5 kW hydraulic power unit with cooler and accumulator Infeed roller guide Hole index detection Hydraulic valves on the carriage Punching unit Separation device Original documentation In perfect working condition until disassembly at the customer's plant. Control unit not included. For integration into an existing roll forming line, we can support you with: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, Year of construction: 2001, HEAVY DUTY ROLLFORMING LINE 11 STATIONS Djdpfjy Rxzhjx Ac Hjck WIDTH: 450 mm FULL OVERHAUL