Em-Tek Ltd

Condition: excellent (used), functionality: fully functional, CNC WORKING CENTER model BUSELLATO S-MASTER H150 second hand machine 3 axes working condition : very good CE mark : YES volt. 380/50 composition : Psdpfx Ajyfudgoh Hogg 1. vertical router with automatic tools change 2. horizontal router 3. boring unit X / Y ( horinzontal and vertical ) 4. saw blade unit useful size (working range) mm. 3200 x 1350 working travel of the axes : X=4000 mm. Y=1430 mm. Z=265 mm. Maximum panel thickness mm.120 Maximum panel clearance mm.150 Installed power 16 kW Machine weight 4500 kg

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, controller manufacturer: Heidenhein, controller model: Heidenhein iTNC 530, table width: 1,000 mm, table length: 1,600 mm, rotational speed (min.): 7,500 rpm, rotational speed (max.): 7,500 rpm, spindle speed (min.): 7,500 rpm, We offer this used TYC FVP 50 CNC machining center, year of construction 2003. One small need for repairment - gasket seal, otherwise completed and ready for use. Pjdpfjyfh Npox Ah Hogg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, CNC working centre model BIESSE ROVER A 3.30 CE Standard 3-axis second hand machine Pedpfxjydpuwj Ah Hsgg automatic tool changer with 8 positions X=mm. 3060 Y=mm. 1260 Z=mm. 150 ( Piece passage ) installed power Kw 17 weight kg. 2800

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Biesse Rover A 1632 machining center X working area: 3,280 mm Y working area: 1,600 mm Z working area: 180 mm Pedsydni Tspfx Ah Hjgg Main 5-axis electrospindle Vertical drilling heads: 10 Horizontal drilling heads on X: 6 Horizontal drilling heads on Y: 4 1 blade, max. diameter 120 mm 16-position tool changer Chip conveyor belt 6-beam worktable BECKER vacuum pump 250 m³/h Protective safety nets

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,380 mm, travel distance Z-axis: 250 mm, controller model: Xilog Maestro, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Working Area X-Axis: 3,680 mm Working Area Y-Axis: 1,380 mm Working Area Z-Axis: 250 mm Spindle Speed: 24,000 rpm Number of Working Zones: 2 Number of Adjustable Bars: 6, 1,300 mm Number of Pneumatic Bakelite Bars: 4 Number of Adjustable Suction Cups: 3 Front Tool Changer System: 10 positions Rear Tool Changer System: 16 positions F 12L Vertical Drilling Head Spindles: 8 F 12L Horizontal Drilling Head Spindles X-Axis: 2 F 12L Horizontal Drilling Head Spindles Y-Axis: 2 MACHINE DETAILS Pedpfx Ahoydmbnj Hsgg Electrospindle: 12 kW, HSK 63F Vacuum Pump: 250 m³ Control System: Xilog Maestro EQUIPMENT Tecpad Mobile Console Bar Worktable Laser Line for Virtual Zero Positioning on Y-Axis Prisma KS 5-Axis Vertical Electrospindle Tool Group Blades for Groove Cutting Pro-Speed Safety System Front Guard and Safety System Automatic Lubrication System

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-09-5124, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, controller model: Homatic PC 85 Power Control, TECHNICAL DETAILS X-axis working range: 6,000 mm Y-axis working range: 1,650 mm – up to 1,750 mm for milling Max. travel height during edge banding: 60 mm Max. applicable edge height: 65 mm Minimum internal radius: 30 mm Automatic tool changer: 18 positions Drilling head: 27 spindles (4 kW) Max. unit saw blade diameter: 200 mm MACHINE DETAILS Control system: Homatic PC 85 Power Control Software: WoodWop Pedpfx Ahjydl Nwo Hjgg Electrospindle C Vector: 11 kW, HSK F63 Edge specification: Rolls, PVC / ABS 0.4 - 3 mm EQUIPMENT 10 adjustable support rails for vacuum cups Loading and unloading aid with 8 pneumatic rods Vacuum cup positioning with laser system Edge banding unit with 360° rotation, glue pot, and preheater for granular EVA glue Rubber-coated pressure roller + Rubber-coated pressure roller Preheating lamp Edge trimmer and edge scraper Edge holder magazine Front and side safety system with carpets Protective cage around access area Chip extraction with motorized conveyor belt Air conditioning for machine control cabinet Automatic lubrication system Vacuum pump

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AL/008514, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, controller model: PC mit Xilog Plus Software, workpiece height (max.): 60 mm, overall weight: 2,800 kg, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,000 mm Workpiece thickness (processable): 60 mm Upper drilling and milling unit Electrospindles: 1 Vertical spindles: 24 Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Grooving saw unit X-direction: 1 Grooving saw unit power: 2.2 kW Lower drilling and milling unit Electrospindles: 1 Vertical spindles: 24 Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Grooving saw unit X-direction: 1 Grooving saw unit power: 2.2 kW Pgjdpfoydl Adox Ah Hog MACHINE DETAILS Control: PC with Xilog Plus software Weight: 2,800 kg EQUIPMENT Panel clamps Manual workpiece loading on Flotex table Automatic workpiece unloading Automatic central lubrication

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1000012445, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,800 mm, overall weight: 4,000 kg, TECHNICAL DETAILS Working area X-axis: 3,600 mm Working area Y-axis: 1,800 mm Number of working zones: 2 Tool change positions on the rear: 16 Tool change positions on the machine: 8 Vacuum pump: 250 m³/h Drilling head BH 10 configuration: 15 vertical spindles on the X-axis 17 vertical spindles on the Y-axis MACHINE DETAILS Pgedpfx Ahjydk Aio Hsg Electrospindle power: 13.2 kW Electrospindle type: ISO 30 Control: CNC with B-Solid software Weight: 4,000 kg EQUIPMENT Nesting work table Automatic loading system with side lift table Label printing system with automatic application on the loading table Panel separation system with suction cups Automatic unloading system with motorized conveyor belt Worktable cleaning system Protection and safety system with perimeter fencing Safety system with bumper Automatic lubrication system Air-conditioning system for cooling and cleaning the machine control unit

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 94464, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, controller model: XNC Numerical Control, TECHNICAL DETAILS Working Area X-Axis: 3,400 mm Working Area Y-Axis: 1,300 mm Working Area Z-Axis: 155 mm Number of Work Fields: 2 Tool Changer Positions (lateral): 3 Tool Changer Positions (chain): 20 Drilling Head Configuration: 10 vertical drills X-axis 12 vertical drills Y-axis 6 horizontal drills X-axis 2 horizontal drills Y-axis MACHINE DETAILS Pgjdpfx Ahjydkkgo Hog Control System: XNC Numerical Control Vertical Spindle Type: C-axis Vector, ISO 30 cone type EQUIPMENT Extraction pump 8 manually adjustable beams for suction cup support with display 8 pneumatic bakelite rails for panel lifting 3 manually adjustable suction cups per beam Front safety and protection system with mats Comprehensive safety fencing Motorized mat for chip removal

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 57269, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,205 mm, controller model: NC 1000, TECHNICAL DETAILS X-axis working range: 4,300 mm Y-axis working range: 2,205 mm Vertical spindle: 1 unit, HSK F63 Tool changer system: 8 positions (head) Tool changer system: 21 positions (rear, chain) Drilling head: BH 20 Vertical spindles on X-axis: 8 units Vertical spindles on Y-axis: 8 units Horizontal spindles on X-axis: 4 units Horizontal spindles on Y-axis: 4 units Pjdpfx Ahsydkdgs Hjgg Saw unit on X-axis: diameter 120 mm Saw unit on Y-axis: diameter 120 mm MACHINE DETAILS Control: NC 1000 Software: Biesse Works Weight: 400 kg EQUIPMENT FT nesting table with full surface Automatic loading system with side lift table Automatic labelling machine for barcode printing Automatic printing and dispensing system for adhesive labels Automatic unloading system with motorized conveyor belt Front safety and protection system with mats and fences Automatic lubrication system Air conditioning for control cabinet Vacuum pump

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Working area: X-axis: 2310 mm, Y-axis: 628 mm, Z-axis: 90 mm Max. programmable speed: X-axis: 100 m/min; Y-axis: 75 m/min; Z-axis: 15 m/min Drill holder: diameter 10 mm Spindle speed: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles on the X-axis, 12 vertical spindles in the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Pjdpfeydf Ndjx Ah Hjgg Vacuum tool capacity: 40 m³/h CNC: Display: monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Stock location: Röllbach

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,265 mm, travel distance Z-axis: 120 mm, saw blade diameter: 120 mm, Equipment: CE marking, Dismantling and loading can be handled by the seller! TECHNICAL DETAILS Working area X: 3,250 mm Working area Y: 1,265 mm Working area Z: 120 mm Tool holder: HSK-F63 Tool changer: 10 positions, mounted on the milling head Drilling and sawing units Vertical drilling spindles: 12 Pgodjyddqmspfx Ah Hsg Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Groove milling unit X-direction: 1 Saw blade diameter: 120 mm Table system Pod and rail table: available Consoles: 6 MACHINE DETAILS Drive data Main motor power: 9.2 kW Total connected load: 15 kW Vacuum pump capacity: 100 m³/h EQUIPMENT Positioning aid Safety mat Digital LED display on the consoles Auxiliary device for tool change Two rows of stops Workpiece supports Handheld control device Pendulum processing CE marking

Condition: excellent (used), Year of construction: 2008, Nabízíme k prodeji velmi zachovalé CNC obráběcí centrum HOLZ-HER EASY-MASTER 7018K. Stroj je zkontrolovaný, pravidelně servisovaný a připravený k okamžitému použití. 🔧 Výbava a přednosti stroje: • Výkonné hlavní frézovací vřeteno 6,5 kW (HSK 63 F) • Vrtací agregát: - 10 vertikálních vřeten pro vrtání do plochy - 4 horizontální vřetena pro vrtání do hran (2× osa X, 2× osa Y) • Drážkovací agregát s pilou • Silná vakuová vývěva BECKER • Zásobník nástrojů: 8 pozic + paměť na 6 nástrojů mimo stroj • Přehledný ovládací sloupek, dálkové ovládání • Intuitivní řídicí software CAMPUS • Sada vakuových přísavek + Bonus - otočné přísavky ⚙️ Konstrukce • Vysoce přesné zakryté lineární vedení, chráněné proti prachu a nečistotám • Dlouhodobě stabilní přesnost, vysoká tuhost a dlouhá životnost 🚚 Dodání a servis • Zajistíme dodání stroje na klíč: Pjdpeyc Ulljfx Ah Hegg • doprava • instalace • seřízení • zaškolení obsluhy • Samozřejmostí je zajištění náhradních dílů, spotřebního materiálu, maziv a pravidelný servis. 💰 Cena: dohodou 🧾 Možnost odpočtu DPH 📦 Dostupné ihned

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1000025340, travel distance X-axis: 6,735 mm, travel distance Y-axis: 1,650 mm, travel distance Z-axis: 245,290 mm, rapid traverse X-axis: 85 m/min, rapid traverse Y-axis: 85 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Biesse BH 660, bSolid, bEdge, workpiece height (max.): 60 mm, Short Description • X axis working area: 6735 mm • Y axis working area: 1650 mm • Working Table: Pod and Rail • Main Electrospindle Power: 13.2 kW • Number of Controlled Axes: 4 axes • Max Edge Height: 60 mm • Total Number of Drilling Spindles: 20 • Total Number of Tool Changer Positions: 16 Long Description • Subfamily: CNC Machining Centers for Routing, Drilling, and Edgebanding • Type of Work: Edgebanding, Drilling, Routing • Maximum Panel Passage: 60 mm • Number of Working Fields: 2 • Working Table: Pod and Rail • Number of Rails: 10 • Pod Position Indicators • Vacuum Cups for Securing Workpieces • Number of Vacuum Cups: 40 • Clamps for Securing Workpieces • Vacuum Pump • Number of Pumps: 1 • Single Pump Capacity: 250 m³/h • Boring Units: 1 (Top) • Vertical Boring Spindles: 20 • Horizontal Boring Spindles in X: 4 • Horizontal Boring Spindles in Y: 4 • Router Spindles: 1 (Top) • Number of Controlled Axes: 4 Pgjdjycvcxjpfx Ah Hog • Automatic Tool Changer • Motor Power: 13.2 kW • Edgebanding Operating Units: 1 • Gluing Unit: Mounted on Main Beam • Glue Pot for Hot-Melt Adhesive • Edge Coil Magazine • Number of Magazine Positions: 4 • Grooving Unit: 2 Top Units, Fixed for Grooving in X and Y • Tool Magazine: 1, with 16 Positions • Tools Positioned on the Machining Head • Combination Head for Edge Scraping and Glue Scraping • Air Jet Panel Edge Cleaning Unit • Control System: PC Control • Machine Programming Software: Bsolid • Protective Structure for Operating Units with Safety Sensors • Waste Chip Conveyor

Condition: good (used), Year of construction: 2009, Brief Description of Basic Equipment ·      Console table ·      Automatic console positioning ·      Three-stage clamping element ·      Laser positioning aid for vacuum clamps ·      Vacuum clamps Main spindle 15 kW C-axis with aggregate interface Interface for Flex5 aggregate 30-position chain tool changer Tool holder HSKF 63 Drilling head with 13 spindles Pgodeyb Ndgspfx Ah Hjg WoodWop package for CAD/CAM PC integration Rack and pinion drive for X and Y axis Ball screw for Z axis Z-axis travel: 600 mm Travel speeds: Vector speed: 113 m/min X and Y axis: 80 m/min Z axis: 30 m/min Free-standing electric cabinet. Homag control system Homag Homatic CNC System NC 83 with PLC control Remote diagnostics / telephone modem Technical Data Max. workpiece length: 4000 mm (all aggregates individually), max. 1375 mm with pendulum operation Tool diameter: 25 mm Single: 4175 mm / pendulum: 1550 mm Workpiece width (all aggregates): front 1150 mm, rear 1400 mm Workpiece thickness: 40 mm Milling operation, tool diameter 25 mm: front 1220* mm, rear 1550 mm *Workpiece thickness 40 mm Console table K Console length: 1340 mm Side stop rails Vacuum clamps Max. workpiece thickness: 300 mm with standard clamp max. 120 mm with mechanical clamping elements / clamping templates (customer-supplied) up to 80 mm with standard clamp Working height: 960 mm (underside of workpiece) PM basic equipment Automatic console positioning Three-stage clamping element Main spindle 15 kW (12 kW in S1 mode) Frequency inverter Spindle with hybrid bearings C-axis with aggregate interface Interface for Flex5 aggregate Vertical high-speed spindles Pneumatic lowerable loading stroke Two-stage clamping element for PM console Clamping device for post edge Three-stage clamping element for PM console Saw unit D= 280 mm Drilling/milling aggregate, 4-spindle for tool changer Lock case aggregate 2 Immediately available All information supplied without liability. Further technical data upon request. Individual tools may also be purchased at additional cost. The tools shown are NOT included in the base price!

Condition: excellent (used), incl. tools as per list (see PDF document), equipment as per attached offers (see PDF document), Machine No. 0-201-08-2653, single piece processing 3300 x 1550 mm, 14-position rotary tool changer, dimensions as per brochure (see PDF document), in very good condition Machine is demonstration-ready – feel free to arrange a viewing appointment Psdpfoybbhwex Ah Hegg Price ex-location

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, CNC Machining Center Holz-Her Eco-Master 7120 Year of manufacture: 2003 Technical condition: very good Technical data: Pedpfx Aheya Nb Nj Hegg - 1 milling head - drilling unit - 3 axes - dimensions: 2535 × 1283 × 130 mm - 90° saw - 6 traverses

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 125 mm, rotational speed (max.): 24,000 rpm, Main Motor Power: 12 kW Torque support: yes 4th axis - C-axis Pgjdpfxsya Aimj Ah Hsg 5th axis - Aggregate interface Tool clamping system - HSK-F63 Tool changer positions - 14 Number of exchangeable units - 3 Vertical drilling spindles - 19 Horizontal X - 4 Horizontal Y - 2 Groove saw - 90° turnable Vacuum pump - yes Safety device - safety mat Control - Homag Power Control PC st Software - Homag Woodwop 5.0 Weight - 4,500 kg CE marking - yes Space required Length = 6580 Width = 4580 Two rows of stops Tool changing auxiliary device Workpiece support aids

Condition: excellent (used), Year of construction: 2015, Specification: Pjdpfx Aheyar Rtj Hsgg X/Y: 110m/min Z: 20m/min Working Field X: 3250mm Y: 1400mm (Passage 1600mm) Z: 125mm + 100mm for vacuum pods 21 vertical drilling spindles 6 horizontal drills in the X direction 4 horizontal drills in the Y direction Grooving saw swivelling in the X & Y direction 10/12Kw main routing spindle Torque support for carrying aggregates (aggregates can not be swivelled) 8 Position tool changer travelling within the support in X & Y direction (not suitable for aggregates) 2 position linear pick up tool changer suitable for aggregates Optimised processing sequence drilling/routing Laser Pin for Vacuum pod positioning Automatic central lubrication Weeke quality pack Energy saving mode 400V 50hz CE

Condition: used, Year of construction: 2014, No. 01 Homag Weeke machining center Mod. BMG 111/45/12/K Usable working area with electrospindle 4500 x 1550 mm Usable working area with all units 4500 x 1250 mm Boring head with 12 vertical spindles and 4 + 2 horizontal spindles, saw unit 0/90 Electrospindle 9 kW 12 Hp HSK, rotation speed from 1250 to 24000 rpm 4th axis for aggregate rotation 8-position circular tool changer 8-position lateral tool changer Lateral pick-up tool changer Special FLEX 5 HIGH PERFORMANCE unit for drilling, milling, cutting Automatic tilt adjustment 0 – 100 degrees Chip conveyor discharge to the right 8 Schmalz work tables, 16 suction cups Suction cup positioning laser 2 vacuum pumps POWERTOUCH control system Woodwop dxf import Pedjyarwtopfx Ah Hogg Teleservicenet assistance CE compliant Year 2014

Condition: like new (used), Year of construction: 2020, operating hours: 100 h, functionality: fully functional, Magi-Cut V11 FULL RELEASE UK LICENCE woodworking software PERPETUAL LICENCE WITH A DONGLE , COST - 7250£ PO - PROFESSIONAL OPTIMISER - 5750 POUNDS SC - STOCK CONTROL - 1500 POUNDS Psdoyapn Nspfx Ah Hegg OUR PRICE - 2999.99 POUNDS - Homag Biesse SCM BRANDT CHEHISA FELDER compatible and many more

Condition: excellent (used), CNC MASTERWOOD CN10/CN12 PROJECT 500 XL + Programming + Tooling Extra-long XL machine, fully equipped for interior fittings, kitchens, wardrobes, doors, and all standard carpentry work. Working area X = 6,200 mm – Y = 1,660 mm – Z = 150 mm Main motor power: 8 kW – 10-position tool changer – 17 vertical drilling spindles Maximum spindle speed: 24,000 rpm – Tool clamping system: ISO 30 – 4 horizontal drills in X – 2 horizontal drills in Y – Notching saw tiltable to 90° – Gantry frame construction – 10 support consoles – 2 active vacuum pumps + 1 backup vacuum pump – Safety system with guard rails and safety mat Includes 1x chip conveyor – Safety barriers The chiller and air dryer integrated in the machine are new – The vacuum pumps were overhauled in 2021 – Ceiling-mounted laser for positioning suction cups and workpieces – The computer system and programming (with internet and USB access) are new and were updated in 2021. Psdpfx Aex U Tpnjh Hsgg Dimensions: 10m x 3.30m x 3m – Approx. weight: 5,000 kg Machine sold complete with programs, control console, tooling, and accessories. In good technical and visual condition.

Condition: used, Year of construction: 2019, functionality: fully functional, travel distance X-axis: 1,500 mm, nominal power (apparent): 65 kVA, controller manufacturer: ESA, total height: 3,100 mm, total length: 2,500 mm, total width: 4,000 mm, table load: 50 kg, number of slots in tool magazine: 12, input voltage: 380 V, GREDA MACHINING CENTER MOD. MITIKA V – CE COMPLIANT – USED TECHNICAL SPECIFICATIONS TABLE - X-axis 2700 mm (longitudinal) - X-axis (spindle only – unit A) 2900 mm - X-axis (sander only – unit B) 2050 mm - X-axis (milling unit only – unit C) 2050 mm - X-axis (gouging unit only – unit D) 1500 mm - X-axis (saw unit only – unit E) 1750 mm - X-axis (sander only – unit F) 1500 mm - X-axis with all units 1500 mm - Transversal Y-axis 380 mm - Transversal V-axis 720 mm - Vertical Z-axis 630 mm - B-axis (electrospindle) +/- 90° - A-axis rotation (indexing unit) continuous - Dimensions: 4000 x 3100 x 2500 mm - Installed power: 65 kW - Compressed air: 6 bar - 380 Volt, 3 / 50 Hz - Lathe axis upgrade with “double motor” mode and max rotation speed 2500 rpm - Short workpiece loader up to 100 mm - Tailstock with integrated quill locking - DATA LOG for Industry 4.0 - Max workable diameter: 500 mm - Max loadable weight (manual): 50 kg - Max loadable length: 2050 mm - Min loadable length: 250 mm - Workpiece diameter: max 150 mm / min 40 mm 4-AXIS PANTOGRAPHING UNIT (A) - Automatic tool changer with 12 positions, HSK 63 F taper - Electrospindle 11 kW - Max speed 24,000 rpm Pgsdpfx Ahox Uy Nbj Hsg - Tool magazine with 12 positions - HSK 63 F tapers ADDITIONAL SANDING UNIT FOR NARROW PIECES (B) - 1 motor, 0.5 kW - Max speed 3000 rpm SANDING UNIT (C) - 1 motor, power 4 kW - Max speed 3000 rpm VERTICAL ROUGHING UNIT (D) - 1 motor, 11 kW - Max speed 9000 rpm - Shaft diameter 40 mm - Tool diameter 125 mm, h = 180 mm HORIZONTAL TURNING UNIT (E) - 1 motor, 11 kW - Max speed 4500 rpm - Shaft diameter 35 mm - Centralized lubrication system providing automatic lubrication of all moving parts, fully managed by the CNC - ESA CNC control EASY LATHE PROGRAMMING – STANDARD MODULE: - 3D software for drawing and programming up to 5 interpolated axes, with 3D simulation - Year of manufacture: 2019

Condition: excellent (used), Year of construction: 2011, 5-axis working center in very good condition. Pjdox Ur Iiepfx Ah Hjgg Technical data will be updated soon.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Pgsdpfsx Tqg Ujx Ah Heg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.