Dr. Braun Gmbh

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Ksdpfeyupulox Ahvelp Very good condition, as new

Condition: new, Year of construction: 2026, pressing force: 100 t, For sale is a hydraulic C-frame single-column press with a pressing force of 100 tons. The machine features a table size of 700 × 750 mm, a maximum installation height of 550 mm, and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly, and forming tasks in industrial and production environments. ##### Technical data & information: Hydraulic Single-Column Press – C-Frame – 100 T #### General Information - Design: Single-column press / C-frame - Pressing force: 100 t - Table size: 700 x 750 mm - Max. distance between ram and table: 550 mm Kedeytql Aspfx Ahvjlp - Working height: 1000 mm - Overall dimensions (W x D x H): 1200 x 1150 x 2550 mm - Total weight: approx. 5,800 kg - Frame: welded steel frame - T-slots / drillholes: DIN 650 / 22 mm #### Hydraulic Cylinder - Stroke: 400 mm - Piston rod Ø: 80 mm - Cylinder Ø: 140 mm - Max. operating pressure: 270 bar - Interchangeable press head: Ø 100 mm #### Hydraulic Power Unit - Return speed: 14 mm/s - Working speed: 9 mm/s - Hydraulic pump: ASC - Delivery rate: 19 l - Motor power: 7.5 kW - Oil tank volume: approx. 70 l - Hydraulic block / valves: Dubomatic - Pressure display: manometer - Adjustable pressure setting - Sensors: limit sensor and pressure switch - Cooling: air cooling - Power unit: mounted on top of the press #### Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 7.5 kW - Total connected load: approx. 10 kW #### Control Cabinet - Protection class: IP54 - Reserve space: 30% - Cooling: available - Internal lighting: available - Operating mode switch: lockable #### Operation - Manual control via hand lever valve - Foot pedal operation - Pressure adjustment via pressure relief valve - Pressure indication via manometer - Emergency stop on control panel (Hydraulic press, single-column press, C-frame press, 100-ton press, 100 t press, workshop press, straightening press, assembly press, insertion press, industrial press, production press)

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec Kljdjyif Nrepfx Ahvep total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, total height: 3,200 mm, total width: 1,200 mm, total length: 1,900 mm, pressing force: 100 t, table width: 750 mm, table length: 560 mm, operating speed: 200 mm/s, overall weight: 5,040 kg, reverse speed: 200 mm/s, ram plate width: 530 mm, ram plate length: 400 mm, stroke length: 500 mm, Equipment: documentation/manual, Hydraulic press PYE 100 S1M with ejector. Manufacturer: Werkzeugmachinen GmbH Zeulenroda (Germany), year 1990. Specifications: Maximum pressing force 100 t. Operating pressure 16 MPa. Maximum ejector force 40 t. Ejector piston stroke 200 mm. Upper table 530x400 mm. Lower table 750x560 mm. Clear opening 800 mm. Cylinder stroke 500 mm. Downward speed 200 mm/s. Upward speed 200 mm/s. Power requirement 17 kW. Weight 5040 kg. Height 3200 mm, length 1900 mm, width 1200 mm. Kljdpfeygtzyox Ahvjp

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve Klsdpfxoyfwyws Ahvop - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm working feed 5 - 15 mm/sec speed down 130 mm/sek Kjdjyfwxtspfx Ahvolp speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: used, Year of construction: 1985, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 440 mm Kjdeyfwvlepfx Ahvolp table surface area 330 x 270 mm table height over floor 970 mm ram surface 65 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,8 x 1,3 x 2,4 m with oil-hydraulic drive, light-guard (make Sick C 4000), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation as is where is, WITHOUT additional work, free loaded to truck

Condition: used, Year of construction: 2003, pressing force: 120 t, overall weight: 12,000 kg, Hydraulic Press Brake Brand: Hidrogarne / Ermaksan Kledpfjx Tp Auex Ahvjp Model: AP 4100-120 Year: 2003 Power: 11KW Weight: 12,000kg Bending length: 4100mm Force: 120t Approach speed: 80mm/s Working speed: 8mm/s Y-axis and X-axis back gauge control with ELGO control system. PROMECAM punch holder. Supplied with: - 4m one-piece die, 90x90mm with several V openings - 4m gooseneck punch, 90mm height, in 835mm sections and some additional smaller pieces - Also comes with sets of straight and 30-degree punches (see pallet photos of punches)

Condition: used, Year of construction: 1992, functionality: fully functional, installation height: 500 mm, table width: 1,400 mm, stroke length: 300 mm, • Type of machine: Hydraulic press / C-frame press • Manufacturer: Müller Weingarten (historic German engineering company) Kljdox Ry Hrepfx Ahvep • Model designation: CKD 100 4.1 • Applications: • Forming, punching, pressing of metal or plastic components • Small and medium batch production • Tool and die making • Design: Robust H-frame or single-column construction, suitable for precise pressing and forming operations • Capacity: Typically around 100 t pressing force (number indicates approx. 100 metric tons nominal force—common for CKD models) 📐 Typical Features • Hydraulic drive: Precise control of force and stroke • Stroke range: Sufficient for versatile applications (e.g. drawing, bending, punching) • Stable construction: Designed for continuous industrial operation • Tool integration: Mounting options for custom tools and dies • Operation: Usually manual or semi-automatic, depending on year of manufacture 🧱 Typical Uses Hydraulic presses like the CKD series are used in production for: • Metal forming (e.g. bending, deep-drawing) • Assembling components by pressing • Assembly processes with defined force • Quality assurance and test pressing Complete circuit diagrams and documentation available! Inspection under power possible at any time.

Condition: used, Year of construction: 1967, total height: 2,850 mm, total width: 1,750 mm, total length: 2,000 mm, Empty weight: 6.000 kg - Year: 1967 - Documentation available: No - CE certificate present: No Ksdpfx Ahsx N Sxdevolp - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total height: 2,850 mm, total width: 1,800 mm, total length: 1,100 mm, Empty weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 10340 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 160 - Table length [mm]: 630 - Table width [mm]: 550 - Ram length [mm]: 1100 - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Kledexywkqopfx Ahvep Lukas van Rossum

Condition: not inspected (used), functionality: unexamined, pressing force: 100 t, table width: 460 mm, table length: 460 mm, type of input current: three-phase, travel distance Z-axis: 570 mm, pressure: 400 bar, input voltage: 400 V, 1 Hydraulic Press MUNARRIZ ; Maximum pressure: 400 bar Table dimensions: 460 x 460 mm Presser diameter: 180 mm Cylinder diameter: 180 mm Approximate vertical stroke: 570 mm Manual drive Hydraulic pump IHBER; YOM: 2024 Included a J.ANGEL BACAICOA weightless manipulator Power of the pump motor: 15 kW Dimensions: 2900 x 2300 x 3000 mm Approximate weight: 1500 kg The machine has been working until May of 2025. Actually is dismounted and can not be tested. Kodoxt Hzfspfx Ahvslp No warranty. The machine was reformed on 2024. All the hydraulic group was replaced by a new by the company IBHER in 2024 If the potential purchaser wants to see the machine operating this has a cost of 1.500 Euros ( Taxes not included )

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Klsdpfxewzzzfe Ahvop Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Kjdpfx Ahswrkctovelp Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 59800 € 1130.22 € 100 to 400 mm 800 x 500 mm 500 mm 110 mm/s 10 mm/s 160 mm/s 11 kW 1900 mm 1700 mm 2930 mm 5500 kg 250 bar Welded monoblock frame Cylinders hardened and chrome-plated 2 auxiliary cylinders and 2 round guides T-slots can be configured according to customer requirements Pump, valves, and filters from Bosch Rextroth Hydraulic overload valve Hydraulic proportional valve Cooler Siemens electrical components 8 additional signal inputs and outputs 7-inch touchscreen Siemens S7 PLC Stroke, pressure, speed, and dwell time adjustable via the PLC Remote maintenance access Sick light guards Safety covers Safety PLC from Siemens or Sick Category 4 sensors and photoelectric switch Two-hand control panel Klodowmwvcjpfx Ahvsp Reset and emergency stop buttons Equipped according to CE regulations

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 91200 € 1723.68 € 100 to 500 mm 600 x 900 mm 700 x 1100 mm 750 mm 320 mm 100 mm/s 8,5 mm/s 165 mm/s 11 kW 2100 mm 1900 mm 3350 mm 7300 kg 240 bar 30 to 200 mm 120 mm 170 bar Kledowir Dgopfx Ahvop 52 mm/sec. 700 x 400 mm 2-hand control Control over SPS Adjustable die cushion stroke Lubricant-free ram guide light barriers User Manual in German according to CE rules

Condition: new, Year of construction: 2024, neu 2024 7305 prompt, Zwischenverkauf v Italien 46400 € 886.24 € 1 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm Kodpfxjwiry Is Ahvelp 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 74100 € 1400.49 € 100 to 300 mm 600 x 900 mm 700x1100 mm Kedpowiqy Tofx Ahvolp 550 mm 100 mm/s 8,5 mm/s 165 mm/s 11 kW 2100 mm 2050 mm 3050 mm 6500 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules

Condition: used, Year of construction: 1978, pressure 100 t stroke 150 mm Kljdpfx Aevzxp Uehvsp throat 345 mm dayligth 400 mm table surface area 1200 x 600 mm table height over floor 850 mm ram surface 560 x 500 mm feed down 350 mm/s feed up 350 mm/s working feed 25 mm/s oil volume 560 l power requirement 22,0 kW Weight 8,3 t dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light guard (Sick), mechanical depth stop with hydraulic cutting impact cushioning, two-hand operation

Condition: new, Year of construction: 2025, table height: 850 mm, throat depth: 325 mm, pressing force: 100 t, table width: 650 mm, table length: 850 mm, Equipment: safety light barrier, STANDARD FEATURES - Vibration method stress / welding tension relieved steel construction body and parts - 8-surface slide / bearing for high precision and long-lasting use - PLC control and touch panel - Argon application for fixing elements and steel drawn pipes - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by "welding coordination engineers" certified according to EN ISO 14731) - Parallelism and perpendicularity tolerances are applied according to ISO AND DIN Norms. (≤ 120 microns/meter) - PARKER / REXROTH hydraulic unit - SIEMENS / SCHNEIDER electrical consumables - Automatic central lubrication system - Two-hand control - Cooling system TECHNICAL SPECIFICATIONS MODEL CHCP 100 PRESSURE (TONS) 100 STROKE (MM) 600 THROAT DEPTH (MM) 325 TABLE – RAM DISTANCE (MM) 700 Ksdsvzku Aspfx Ahvelp TABLE DIMENSION (MM) 650X850 PRESS DEPTH (MM) 1300 PRESS WIDTH (MM) 750 TABLE HEIGHY FROM FLOOR (MM) 850 PRESS HEIGHT (MM) 2700 MAIN CYLINDER DIAMETER (MM) 230 ENGINE POWER (KW) 15 WEIGHT (KG) 8500 COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: 2 (TWO) MONTHS DEPENDING ON ORDER PRODUCTION FROM 40 TONS TO 200 TONS IS AVAILABLE.

Condition: used, Year of construction: 1996, pressure 100 t throat 510 mm stroke 600 mm dayligth 1000 mm Klsdpfsvuunmjx Ahvsp table surface area 1025 x 650 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 600 x 400 mm table height over floor 970 mm ram surface 1025 x 650 mm feed down 350 mm/sec feed up 330 mm/sec working feed 30 - 43 mm/sec oil volume 540 l total power requirement 48,0 kW weight of the machine ca. 12,0 t required space 1,2 x 2,7 x 3,9 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion in table Video of the finished 'sister machine' - with new electrical control - available

Condition: used, Year of construction: 1993, pressure 100 t throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m Kjdjvuufljpfx Ahvolp year of manufacture 1979 - overhaul 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse - can also be offered with new control on request

Condition: ready for operation (used), Press Machine, Traveling Head Cutting Machine, Punching Machine, Stamping Press, Hydraulic Gantry Press,Sanson Chiesa Turbo, Used Machine Kjdpfoukpcysx Ahvjlp Manufacturer: Sanson Model: Chiesa Turbo Overall Dimensions: 3480 x 1040 x 2420 mm Weight: 5500 kg Electrical Data: 380V, 50 Hz Working Cylinder Diameter: 250 mm Operating Pressure: 200 bar Stroke Length: 120 mm Pressing Surface: 900 x 1000 mm Cutting Table: 1040 x 2500 mm

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic SPS press 100to (1.000KN) pressing force Siemens SPS1200 series Screen 10" Beijer stroke 400mm table top 790mm x 600mm Speed forward 110mm Speed return 140mm Light curtain Sick Remote maintenance module built in Rexroth hydraulics with cooler Available from week 46 fairground Stuttgart Modifications can be realized after request if necessary Kjdpsnp Ndhjfx Ahvjlp

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Kodpom Nntyefx Ahvolp Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)