Apaklar & Weiß GbR

Condition: ready for operation (used), controller manufacturer: 2D touch, throat depth: 200 mm, operating speed: 11 mm/s, reverse speed: 80 mm/s, total length: 4,100 mm, total width: 2,320 mm, total height: 2,800 mm, power: 11 kW (14.96 HP), empty load weight: 8,500 kg, passage width: 2,050 mm, table width: 180 mm, speciale verlenging van 1000 mm voor een totale buiglengte van 3500 mm 3 assen: Y1 / Y2 / X achteraanslag van 1000 mm !! lvd-gereedschap Capacity: 100 ton x 2500 mm + 1000 mm Dsdpjx Enfrjfx Ab Tewf Backgauge: CNC Max stroke: 200 mm! Max distance between table -- ram: 430 mm! Locking speed: 100 mm/sec

Condition: ready for operation (used), controller manufacturer: Cybelec ModEva 10S, throat depth: 405 mm, operating speed: 10 mm/s, reverse speed: 220 mm/s, total length: 5,250 mm, total width: 3,750 mm, total height: 3,650 mm, power: 30 kW (40.79 HP), travel distance Z-axis: 400 mm, empty load weight: 15,000 kg, load capacity: 230,000 kg, passage width: 2,550 mm, 8 assen: Y1 / Y2 / X / X' / Z1 / Z2 / R / V Ram kan 300 ton per meter verwerken! Dwodpfsx Enhasx Ab Tjf Willa gereedschapshouder LVD-gereedschapsadapter ook aanwezig Lasersafe-beveiliging Backgauge: CNC Max distance between table -- ram: min 720 / max 1120 mm Locking speed: 220 mm/sec

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,400 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: TRUMPF, controller model: TASC 6000, bending force (max.): 230 t, working width: 3,230 mm, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 2,690 mm, installation height: 615 mm, operating speed: 10 mm/s, number of axes: 6, type of crowning: CNC-controlled, oil tank capacity: 330 l, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge: 860 mm, overall weight: 16,000 kg, total length: 4,270 mm, total width: 2,120 mm, total height: 3,200 mm, number of support arms: 2, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, + 2 quick-adjustable support consoles on linear guides + 6-axis backgauge system (X1, X2, R1, R2, Z1, Z2) with control cabinet air conditioning + Hydraulic and hardened upper tool clamping + CNC-controlled crowning + Preparation for ACB + BendGuard safety device for 200 mm/s Standard equipment: - Four-cylinder upper drive concept - Electrohydraulic ram drive with proportional valve technology - Ram travel measurement system - Modern block hydraulics - Electronic pressure scale - Spherical suspension and inclination of the pressure beam - CNC backgauge system - Safe forward finger adjustment - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, hydraulic lower tool holder Dodox Elxvjpfx Ab Towf - Flat front cover - Modern safety guard - CE mark - Oil cooler - Control cabinet cooling (air-air) - Operating manual

Condition: used, functionality: fully functional, Year of construction: 1988, Capacity: 5050 x 250 ton. Stroke: 250 mm. Control: Delem DA 23e Country of origin: Denmark/Germany Weight: 28.000 kg. 3-axis controle; Y1, Y2, X, No crowning DSP ligth guard. Dodpfox D U D Ajx Ab Tswf Sold as is. Machine can be inspected under power.

Condition: excellent (used), Year of construction: 2004, Technical Data: Working length: 4050 mm Distance between uprights: 3690 mm Pressing force: 200 tons CNC control: DELEM DA69 Adjustable backgauge Controlled axes: X/X1; R; Z1/Z2 CNC crowning device Stroke: 365 mm Throat depth: 410 mm Dsdpfx Abox D Uxgj Tjwf Installation height: 535 mm Hydraulic tool clamping on top and bottom CE mark Motor power: 30 kW Oil cooler Dimensions (L x W x H): approx. 4900 x 2350 x 2885 mm Weight: approx. 18 tons Accessories: BendGuard safety system Safety devices left and right Oil cooler CNC-controlled lower tool displacement (I-axis) for 2 positions Condition: Very good, well-maintained condition Low usage The seller is not liable for typing or data transmission errors. The machine's appearance, mechanics, and wear correspond to its age; used machines are sold without any guarantee.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 35,767 h, Main Drive Number of axis 9 Dwjdsx D Dqfopfx Ab Tsf Bending length 4000 mm Pressing force 2255 Kn This 9-axis TRUMPF TruBend 5230 press brake was manufactured in 2010. It features a pressing force of 230T, a bending length of 4m, and a stroke of 445mm. Equipped with a 6-steered backgauge axles and includes an angle measuring system and tools. Consider the opportunity to buy this TRUMPF TruBend 5230 press brake. Contact us for more information. Application Types Bending

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,915 h, General Data Machine weight 15000 kg Measurements height 3000 mm Dimensions Machine Length 4100 mm Main Drive Number of axis 5 Bending length 3100 mm Pressing force 2500 Kn Movement X-Axis Movement 600 mm Dodpfox D Dw Ssx Ab Tewf Z-Axis Movement 1900 mm This 5-axis Bystronic Xpert 250/3100 press brake was manufactured in 2014. It features a press force of 2500 kN, bending length of 3100 mm, and a throat depth of 400 mm. The machine includes a robust 22 kW main motor and operates with high precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 250/3100 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 18000 kg Clamping Unit Clamping force 2200 kN Opening stroke Max. 350 mm Dwsdpjx D Ey Uofx Ab Tef Main Drive Bending length 6000 mm Stroke 350 mm Pressing force 2200 Kn This AMADA HFP NT 220-4L press was manufactured in 2011. It features a maximum press force of 2200 kN and a stroke up to 350 mm, weighing 18000 kg. A robust choice for heavy-duty operations, the AMADA HFP NT 220-4L machine we have for sale is ideal for your pressing needs. Contact us for more information. Application Types Bending

Condition: ready for operation (used), Year of construction: 2000, operating hours: 59,827 h, General Data Machine weight 16600 kg Main Drive Pressing force 2000 kN Dwedpox D Ni Tjfx Ab Tjf This HAMMERLE BM 200 - 3100 press brake was manufactured in 2000. It is a robust and reliable machine, ideal for bending applications. Consider the opportunity to buy this HAMMERLE BM 200 - 3100 press brake. Contact us for more information. Application Types Bending

Condition: good (used), Year of construction: 1997, Offer 25494 Technical Data: - Working width: 4100 mm - Press force: 200 t - Distance between uprights: 3670 mm - Table width: 200 mm Dwedpfx Abjx A Tpho Tof - Throat depth: 330 mm - Installation height: 450 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 80 mm/sec - Ram stroke: 250 mm - Adjustable stops range: 120 mm - Drive: 380 V / 25 kW - Space requirement: approx. W 4500 x H 2950 x D 2100 mm - Weight: approx. 16,500 kg - With: - Swivel arm operating panel with Easybend 2D-T control - Motorized backgauge - Various bending tools - Operator panel, foot switch,

Condition: used, Year of construction: 2007, Technical details: pressure: 225 t Dsdex A S Rdjpfx Ab Tjwf chamfer lenght: 4100 mm height of stroke: 400 mm throat: 250 mm dayligth: 917 mm total power requirement: 30 kW dimensions of the machine ca.: 5500 x 2270 x 3310 mm weight of the machine ca.: 22 t

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, controller manufacturer: Cybelec, controller model: DNC 1200, bending force (max.): 200 t, stroke length: 215 mm, number of axes: 6, type of crowning: CNC-controlled, power: 15 kW (20.39 HP), Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, upper tooling, Used high quality very accurate Edwards Pearson PR6 200/4100 6axis CNC Pressbrake for sale New / Year 2001 Model PR6 200/4100 Total axis: 6 axis complete with Crowning Capacity: 4.1m x 200ton / 4100mm x 200ton Fully serviced Very late Pr machine before Bystronic pressbrakes Upper Euro Tool Clamps Complete with with: Cybelec CNC Control with Colour Graphics Y1, Y2, X, R, Z1, Z2 Max stroke 215mm Sick Infrared Lightguards Full set of Top and Bottom Tooling Dwjdpex Avbysfx Ab Tof With crowning

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 83261, controller model: HACO BC59T Graphics, bending force (max.): 250 t, working width: 4,300 mm, distance between stands: 3,800 mm, TECHNICAL DETAILS Pressing force: 250 t Max. working width: 4,300 mm Distance between uprights: 3,800 mm Backgauge depth: 1,000 mm Number of axes: 6 (Y1, Y2, X, R, Z1, Z2) Crowning system: CNC-controlled Punch holder: Quick-release MACHINE DETAILS Dwjdpox Ahktjfx Ab Tof Control unit: HACO BC59T Graphics Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,300 x 2,900 mm Weight: 18,700 kg Transport packages: 1 pc. EQUIPMENT Finger protection CE marking

Condition: excellent (used), Year of construction: 2003, Hess RH 1500 Year 2003 Pallet size: 1400 x 950 mm, extendable to 1100 mm. With surface mixing, automatic opening/closing via remote control, machine in as-new condition. 2 Hess lifts with height for 18 levels, single pallet Hess pallet truck, single pallet, laser positioning. 14 Rotho curing chambers, good condition Dwodexza Hqepfx Ab Tjf Hess cuber with 4-sided clamp. Plate conveyor, approx. 25 m long. Pallet turner, pallet brush. Siemens S7 control system. 7-mould block 1500 Assyx pallets Ridder horizontal strapping machine.

Condition: like new (used), functionality: fully functional, Year of construction: 1997, control type: CNC control, GASPARINI PRESS BRAKE 4000 X 300 CNC DELEN SA 24 E MOD. PSG300/4000 USED MACHINE INTERNAL CODE: SVR 364 Dedpfx Aexy Sn Djb Towf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, controller model: CYBELEC DNC 1200 PS Eco, bending force (max.): 225 t, stroke length: 550 mm, distance between stands: 1,550 mm, working length: 2,050 mm, TECHNICAL DETAILS Press force: 225 t Bending length: 2,050 mm Upright distance: 1,550 mm Stroke: 550 mm Table height: 700 mm Throat depth: 405 mm Distance table/ram: 320-870 mm Frame throat: 405 mm MACHINE DETAILS Control: CYBELEC DNC 1200 PS Eco Machine weight: approx. 14,000 kg EQUIPMENT Controlled axes: Y1 - Y2 - X - R Dedpfx Abexxqm Ns Tewf Z1 and Z2 manually adjustable Lasersafe angle measurement Pneumatically adjustable support table Pneumatic upper and lower tool clamping 2-hand-foot control Manual crowning

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 49,277 h, bending force (max.): 230 t, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 3,680 mm, working length: 4,250 mm, The control computer was completely renewed in 2025. In addition, the oil and filter were replaced in 2025! Djdsxwn Hdopfx Ab Towf TECHNICAL DETAILS Pressing force: 230 t Bending length: 4,250 mm Distance between uprights: 3,680 mm Throat depth: 420 mm Ram stroke: 445 mm MACHINE DETAILS Control: TASC 6000 Machine weight: approx. 19,200 kg Operating hours: 49,277 h EQUIPMENT 2 support arms 1 bending aid Light curtain in front of the machine Foot switch 6-axis backgauge

Condition: good (used), functionality: fully functional, Capacity 160 tons --- Bending length 1250 mm --- Stroke 250 mm --- Thrust 500 mm --- Max. installation height 480 mm --- Dwjdpfx Absxu T Ins Tof Weight approx. 11.2 tons --- Power 30 kW --- System tool holder + tools

Condition: used, functionality: fully functional, Year of construction: 1988, machine/vehicle number: 88'2417, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: DNC884PS, bending force (max.): 300 t, working width: 5,100 mm, installation height: 4,600 mm, type of crowning: CNC-controlled, oil tank capacity: 800 l, overall weight: 35,000 kg, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 63 A, Equipment: documentation/manual, Machine completely refurbished in 2011, with new Cybelec DNC884PS electrical cabinet and new wiring diagrams available. Full mechanical and hydraulic overhaul (including new cylinders). Hydraulic tool clamping. Machine requires an 800mm pit. Immediately available. Retrofit with new digital control console possible on request. The machine must be dismantled into 3 parts for transport (at buyer's expense). Dwedpfjxrybiox Ab Tsf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, controller model: Trumpf TASC 6000, bending force (max.): 230 t, stroke length: 445 mm, distance between stands: 2,690 mm, working length: 3,230 mm, TECHNICAL DETAILS Press force: 230 t Bending length: 3,230 mm Distance between frames: 2,690 mm Stroke: 445 mm Dsdpfsxn Sumsx Ab Tswf Installation height: 615 mm MACHINE DETAILS Control unit: Trumpf TASC 6000 Total power requirement: 42 kVA Machine weight: approx. 19,200 kg Machine height: 3,300 mm EQUIPMENT 2 bending aids Wila tool clamping system (top and bottom) 2 hand/foot controls Die shifting Lasersafe in front of the machine Side safety doors 6-axis backgauge

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: MB_0566, bending force (max.): 220 t, stroke length: 450 mm, working length: 4,250 mm, Equipment: foot remote control, TECHNICAL DETAILS Dwsdpfx Aexn St Njb Tjf Press force: 220 t Bending length: 4,250 mm Stroke: 450 mm MACHINE DETAILS Dimensions & Weight Space requirement: 5,000 × 3,000 × 3,000 mm Machine weight: 20 t Total power requirement: 34 kW EQUIPMENT 2 bending aids in front of the machine Parking space on the left for bending aids Light barrier in front of the machine 4 backgauge fingers Foot switch Including tool

Condition: like new (used), Year of construction: 2013, control type: CNC control, degree of automation: automatic, controller manufacturer: Delem, working width: 3,100 mm, distance between stands: 3,000 mm, travel distance X-axis: 3,500 mm, BLECKEN HYDRAULIC PRESS BRAKE 3100 X 260 TONS TECHNICAL SPECIFICATIONS Dwsdpfx Ajxl R Uyeb Tef Brand: Blecken - Ermaksan Model: PPE SE 3260 CNC: Delem – 4 axes Year: 2012 Bending length: 3100 mm Pressing force: 260 tons Axes: X / Y1 / Y2 / R PRICE AND FURTHER INFORMATION UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKES)

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 1,818 h, machine/vehicle number: 24698, control type: CNC control, actuation type: hydraulic, controller manufacturer: Delem DA-66T CNC CONTROL UNIT, bending force (max.): 200 t, working width: 4,000 mm, throat depth: 410 mm, oil tank capacity: 55 l, overall weight: 12,500 kg, power: 18.5 kW (25.15 HP), input voltage: 415 V, Equipment: documentation/manual, emergency stop, lower tooling, upper tooling, CNC Press brake Baykal APHS 41200 10/27 in excellent condition listed for sale! Year of production is 2017. Press brake comes with variety of prisms and tools, which can be seen in pictures. Specifications: Control Unit DELEM DA66T CNC Nominal Pressure 200t Length of Work Table 4100mm Distance Between Columns 3550mm Throat Depth 410mm Maximum Open Height 530mm Ram Stroke 260mm No. of machine Axis:5 Safety Guarding System Laser System Type Backgauge Travel 750mm Motor Power 18.5 / 24.6 kW / hp Motor Voltage 415V Nett Weight 12,500kg -The new generation DA-Touch controls offers an even higher grade of efficiency in programming, operation and control of today’s press brakes. Ease of use combined with state-of-the-art technology go hand in hand, improving productivity. The touch screen gives access to the proven Delem user-interface and enables direct navigation between programming and production. Functions are directly located where you need them, offering optimised ergonomics throughout the application. Dodpfx Abexl Ddhj Towf The DA-66T offers 2D programming that includes automatic bend sequence calculation and collision detection. Full 3D machine set-up with multiple tool stations giving true feedback on the product feasibility and handling. Highly effective control algorithms optimise the machine cycle and minimise set-up time. This makes using press brakes easier, more efficient and more versatile then ever. -Baykal machine frames are manufactured from hot rolled steel sheets of Fe 520. The two side frames are obtained from the same sheet to ensure the same elasticity under stress. The ram and table are also manufactured from Fe 520 steel and are designed to avoid deflection. -The hydraulic cylinders are manufactured from high resistance steel chromium plated & ground to size. Cylinder pistons are lapped to ensure longevity of the hydraulic seals -The hydraulic unit consists of electronically controlled proportional valves with independent closed loop control of the two cylinders providing full synchronous control. -German manufactured Laser Safety Guard System mounted at each end of machine ensuring correct interfacing and operator safety whilst in operation. The Laser system is designed so each guard will slide up or down to allow for many different types and sizes of tooling enabling safety at the appropriate points as required by the Australian standards. Manual height adjustment with scales and lock for easy positioning. -Sliding front sheet supports enable a wide range of material sizes to be aligned and supported at the correct required width and height. The sheet supports are mounted on precision linear guides for ease of movement. This design can also be adjusted vertically to support material with return bends. -Ram positions (Left & Right) are obtained from independent linear encoders whilst monitoring and adjusting proportional valves. This produces a closed loop system, with guaranteed beam positioning of +/- 0.01mm (Y1 and Y2 Axis) -Accuracy is further ensured by mounting the linear encoders on a C-frame connected directly to the Bed, rather than the side frames. This ensures that deflection of the side frames and uneven loads have no effect on Beam position.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, control type: CNC control, actuation type: hydraulic, controller manufacturer: Triumph, controller model: TASC 6000, bending force (max.): 230 t, stroke length: 445 mm, Machine type: Hydraulic press brake Manufacturer: Trumpf Model: TruBend 5230 Pressing force: max. 2,300 kN Bending length: 4,250 mm Stroke: max. 445.0 mm Operating pressure: max. 300 bar Overrun time: max. 95 ms Overrun distance: max. 10.0 mm Safety distance: min. 190.0 mm Machine weight: 19,200 kg Control: TASC 6000 Backgauge: 4-axis Upper tool clamping: hydraulic Dedpfx Abexf Um Te Tewf Lower tool clamping: hydraulic Lower tool displacement: pneumatic

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm Dwjdpfx Asxf Na Ujb Tsf 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.