Zuse Hüller Hille GmbH

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, table width: 711 mm, table length: 1,626 mm, table load: 1,814 kg, overall weight: 10,887 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,400 g, number of axes: 3, This 3-axis HAAS VM-6 was manufactured in 2024. It features a spindle speed of 12,000 rpm and a robust table size of 1,626 x 711 mm, with a maximum weight capacity of 1,814 kg. The machine includes a tool changer capacity of 30+1 and a rapid traverse rate of 15.2 m/min. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table: max 864 mm (34.0 in), min 102 mm (4.0 in) • Spindle • Max torque: 122.0 Nm @ 2000 rpm (90.0 ft-lbf) • Drive system: Inline direct-drive • Taper: CT40 | BT40 | HSK-A63 • Lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 1626 mm (64.0 in) • Width: 711 mm (28.0 in) • T-slot width: 15.90–16.00 mm (0.626–0.630 in) • T-slot center distance: 125 mm (4.92 in) • Max weight on table: 1814 kg (4000 lb) • Feedrates and thrust • Max cutting feedrate: 12.7 m/min (500 ipm) • Rapids (X/Y/Z): 15.2 m/min (600 ipm) Fjdpfx Asyt Riuea Espd • Max thrust X: 15,124 N (3400 lbf) • Max thrust Y: 18,238 N (4100 lbf) • Max thrust Z: 24,910 N (5600 lbf) • Tool changer • Type: SMTC (side-mount) • Capacity: 30+1 • Max tool diameter (full): 64 mm (2.5 in) • Max tool diameter (adjacent empty): 127 mm (5.0 in) • Max tool length: 406 mm (16 in) • Tool-to-tool time (avg): 2.80 s • Chip-to-chip time (avg): 3.60 s • Utilities • Coolant capacity: 360 L (95 gal) • Air required: 113 L/min @ 6.9 bar (4 scfm @ 100 psi) • Minimum air pressure: 5.5 bar (80 psi) • Electrical • Input AC voltage (3-phase) low: 220 VAC, full load amps: 70 A • Input AC voltage (3-phase) high: 440 VAC, full load amps: 35 A Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1270 x 508 x 635mm, Spindle nose to Table: 102 – 737mm, Table 1324 x 457mm, Spindle speed 7500 rpm, Spindle taper BT40, Spindle Motor 40Hp, HAAS Control, Fedpfxoyt Hf So Aa Ejpd 20 Station ATC, Programmable Coolant nozzle, swarf auger, Low Volt light

Condition: excellent (used), Year of construction: 2008, Data XYZ: 1600 x 800 x 700 mm Spindle speed: 12,000 rpm Fanuc Fedpfx Aoytvq Rja Eopd Through-spindle coolant (IKZ)

Condition: excellent (used), Year of construction: 2008, Technical data XYZ: 1400 x 800 x 700 mm Speed: 12,000 rpm Fanuc Fpedpfeytvp Tsx Aa Eed Internal coolant supply (IKZ)

Condition: used, 1 unit 5-axis universal machining center MIKRON HBM 1350 with chip conveyor BÜRENER KFE 63/40-900 Z60, spindle and guideways worn in, self-dismantling required. Color: as shown, according to pictures and inspection. Condition: used. Storage location: production hall. Payment method: advance payment by bank transfer. Shipping: collection only from location in Regensburg. Fpjdpfx Aajytqaao Eod

Condition: used, Year of construction: 2008, functionality: fully functional, HAAS VF-4SS Machining Center, 4th Axis – !!!! SPINDLE NEW !!!!! Year of manufacture: 11/2008, Commissioned 03/2009 Description: X-axis travel: 1270 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Distance spindle nose to table max.: 742 mm Spindle power: 22.4 kW Max. spindle speed: 12,000 rpm Max. spindle torque: 122.0 Nm at 2,000 rpm Drive system: Direct drive, inline Spindle taper: SK40 Table size (L x W): 1321 x 457 mm T-slot width: 16 mm Number of standard T-slots: 5 Feed rates: - Max. cutting feed: 21.2 m/min - Rapid traverse: 35.6 m/min Tool changer capacity: 40 stations Max. tool weight: 5.4 kg Fpodpfjytpqksx Aa Ejd Tool-to-tool change (avg.): 1.80 s Chip-to-chip change (avg.): 2.40 s Coolant capacity: 208 L Machine weight: 6,033 kg Accessories/Options: - 4th axis rotary table, HAAS HRT210 - Spiral chip conveyor - Coolant tank 200L - Through-spindle coolant (TSC 20 BAR) - 2-stage 25µ filter system - 40+1 position tool magazine - Programmable spindle orientation - 16MB program memory - 8M functions - 4th axis interface - Manual tailstock HTS6 Machine is powered and currently in production.

Condition: used, AWEA BM-1400 is a 4-axis machining center designed for precision, high accuracy and reliability. Table 1500×800 mm; travels X1400 mm, Y800 mm, Z700 mm. Spindle nose ISO 40, 0–12000 t/min (stepless), supply 50Hz 3x400V, total power 40 kVA; weight ≈12000 kg; size L4800×W2850×H3100 mm. Accessories: set of toolholders, high pressure coolant 40 bar, chip conveyor, dividing attachment 4th axis, electronic handwheel, RS‑232 interface, status light. Achieves tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and machine tools. Fedpfx Ajyr Hizea Eepd

Condition: like new (used), Year of construction: 2007, operating hours: 7,039 h, functionality: fully functional, machine/vehicle number: L0638, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 560 mm, controller manufacturer: FANUC, controller model: Oi-MC, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, Machine is as new worked for only 7039 hours plenty of tools 4axis spindle oil cooled Fpedpfoyr Af Esx Aa Ejd

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: 0i-F, total height: 3,107 mm, total width: 3,350 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,692 mm, number of axes: 3, This 3-axis DN SOLUTIONS MYNX 6500 II was manufactured in 2022. As new, showroom model. It features a table size of 1,400 x 670 mm, with an impressive X-axis travel of 1,270 mm and a Z-axis travel of 625 mm. The machine is equipped with a maximum spindle speed of 12,000 RPM and a tool magazine capacity of 40 stations. If you are looking to get high-quality milling capabilities, consider the DN SOLUTIONS MYNX 6500 II vertical machining centre we have for sale. Contact us for further details. • As new, showroom model • Table size: 1,400 x 670 mm • Rapid traverse (X/Y/Z): 30 / 30 / 24 m/min • Tool magazine capacity: 40 stations • Maximum workpiece weight: 625 kg • Guideway type: Box guideways on all axes • Memory: 400 tool offset memory slots • Cooling system: Milling spindle cooling • Stability/construction: Highly stable design for heavy-duty milling; box guideways provide maximum rigidity and vibration damping • Spindle: High-performance spindle with high torque characteristics • Automation/Safety (machine features): Load monitoring; Auto shut-off Fpsdpfxjyrt E As Aa Ejd Additional equipment • Oil skimmer (filtration) • Bar feeder interface (prepared for external bar feeder) Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2017, x-travel 1200 mm Fedpfx Aeyrt Anja Ejpd y-travel 600 mm z-travel 630 mm control Heidenhain weight of the machine ca. 7700 kg

Condition: used, Year of construction: 2014, DOOSAN - MYNX 7500 - 2014 - system DOOSAN FANUC i series - in tool production only (not in mass production) Fpedpsyrrimjfx Aa Esd - spindle running hours 27600 - spindle through cooling - spindle changes (including reserve spindle) - X/Y/Z=1630/762/650 mm - spindle taper BT 40 Big Plus - spindle 12000 RPM - spindle motor 18.5/15 KW (117 Nm) - ATC 30 - table 1630x760 mm - table load 1500 kg - weight 14000 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details Fsdpfx Aeyrqhboa Espd x-travel 1200 mm y-travel 600 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle speed: 6000 1/min. spindle taper 50 SK spindle drive (S1) 10 kW table surface area 1300 x 600 mm table load 1200 kg feed speeds 1-10000 mm/min rapid travel x/y/z 20/20/15 m/min distance table - lower edge spindle 125-725 mm total power requirement 25 kVA weight of the machine ca. 7,5 t dimensions of machine 3600 x 2300 x 3000 mm Additional information Equipped with: * CNC control Heidenhain iTNC 530 * Electr. portable handwheel * Spindle oil cooler * Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg * Preparation for hydraulic machine vice * Preparation for 3-D measuring probes * Chip conveyor * Coolant system, coolant through spindle 20 bar * Machine documentation Working hours (date 1st. November 2024): - Control on: 60.818 h - Machine on: 59.598 h - Program cycle: 22.283 h - Spindel on: 19.522 h

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, total height: 2,950 mm, total length: 2,900 mm, total width: 2,600 mm, rotary table diameter: 400 mm, rotational speed (min.): 25 rpm, rotational speed (max.): 15,000 rpm, overall weight: 8,000 kg, operating hours of spindle: 18,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, OKUMA MU-400V with OKUMA OSP P200M CNC Control 5-axis CNC machining center Spindle drive 50-15,000 rpm (ISO40/BIGPLUS) 22 kW / 198 Nm Tool changer SK40 according to DIN 69871 (BT40) Tool changer with 32 magazine positions Electronically controlled spindle head flushing system Thermal compensation and machine body ventilation system for compensation or reduction of thermal errors (TAS-S and TAS-C) Coolant supply through the spindle 15 bar / 20 l/min Double screw chip conveyor for chip removal from the working area Synchronous tapping and thread milling Removable electronic handwheel 100 workpiece zero points 200 tool length and 200 tool radius offsets LCD color display OKUMA I-MAP auxiliary dialog 2 USB 2.0 ports Ethernet interface with browser and DNC-T1 for program transfer Work area shower cooling system Hinged belt chip conveyor, discharge height 1000 mm Fpedpoyq Sl Eefx Aa Ejd Tool breakage monitoring and tool length measurement

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,500 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, table load: 1,800 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VM30I was manufactured in 2019. It features a table size of 1320 × 508 mm and a maximum table load of 1,800 kg. With an impressive X travel of 1270 mm, Y travel of 508 mm, and Z travel of 508 mm, this vertical machining centre is designed for high-quality machining capabilities. Consider the opportunity to buy this Hurco VM30I vertical machining centre. Contact us for further details. • Table size: 1320 × 508 mm • T-slot size: 5 × 18 mm • Max spindle torque: 82.3 Nm @ 1740 rpm • Tool changer: 24-position random arm ATC • Max tool diameter: 80 mm • Max tool length: 250 mm • Rapid traverse: 28 m/min • Through-spindle coolant: 20 bar • Spindle chiller • Control: WINMAX 5 CNC with dual screens • Air-conditioned electrical cabinet • Electronic handwheel Fpedpfoyq Nz Rsx Aa Ejd • RJ45 & USB ports • 3-color status light • Coolant and air guns • Dimensions: 4100 × 2500 (3300) × 2550 mm • Condition: Excellent Additional equipment • Screw chip conveyor • Machine vise • Set of tool holders • 3D probe • Documentation (CD-ROM) Technical Specification Taper Size BT 40

Condition: repair required (used), Year of construction: 2001, Mikron HAAS VCE1250 CNC vertical machining center Year: 2001 In need of repair as not under power since 2023. The machine is in good optical condition but its technical condition is unknown. It needs repair. Technical specifications: Axis X 1250 mm Axis Y 500 mm Axis Z 635 mm Fodpfx Aaoyq Nlvj Ejpd Type of CNC Haas Table length 1300 mm Table width 450 mm Max. workpiece weight 800 kg Number of tool pockets 20 Spindle taper SK 40 Max. spindle speed 7500 rpm Spindle motor power 11 kW Weight 6100 kg Accessories/options: prepared for 4.axis ( drive and wiring included ) through spindle coolant swarf spiral Renishaw TS27 coolant tank cabinet with accessories

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 1,260 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: FANUC, controller model: 18M, total height: 3,214 mm, total width: 2,980 mm, table load: 1,200 kg, overall weight: 12,000 kg, spindle speed (max.): 4,000 rpm, spindle motor power: 18,500 W, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DAEWOO ACE V 600 was manufactured in 1997. It features an impressive X-axis travel of 1,260 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine includes a robust table size of 1,400 x 700 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO ACE V 600 vertical machining centre we have for sale. Contact us for further details. • Spindle taper: BT50 / ISO 50 • Tool magazine capacity: 40 tools (header mentions 30 tools) • Spindle nose to table distance: 200–770 mm • Maximum workpiece height: 610 mm • Table size: 1,400 × 700 mm • Rapid traverse rate: 20 m/min • Distance from spindle center to column: 680 mm Fpjdpfxjyq Exlj Aa Ejd

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,450 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: Series 0-M, table load: 1,200 kg, overall weight: 13,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 15,000 W, tool weight: 15,000 g, number of axes: 3, This 3-axis Parpas P15 A was manufactured in 2009. It features a generous X-axis travel of 1,450 mm, Y-axis travel of 650 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1650 x 700 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the Parpas P15 A vertical machining centre we have for sale. Contact us for further details. • Table: • Dimensions: 1650 x 700 mm • T-slots (width x number x pitch): 22 x 5 x 150 mm • Travels: • Distance spindle nose to table: 200–810 mm • Distance spindle center to column: 720 mm • Automatic tool changer: • Capacity: 24 positions • Max tool diameter: 110 mm Fpedpoyq Eapjfx Aa Eod • Max tool length: 300 mm • Tool holder type: CAT-50 / BT-50 • General: • Overall dimensions: 3,500 x 3,100 mm Technical Specification Taper Size ISO 50

Condition: used, Year of construction: 1998, x-travel 400 mm y-travel 300 mm z-travel 300 mm Fjdpfx Aaeyqu Aye Espd control Jasnac tool taper BT30 with shuttle table Coolant treatment The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain TNC 426 PB, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,200 mm Travel Y-axis: 800 mm Travel Z-axis: 400 mm Machine table: 1,280 x 830 mm Number of T-slots: 3x 18 H10 Spindle speed: 9,000 rpm Spindle taper: SK40 Spindle power: 9 kW Spindle torque: 84 Nm Max. speed of linear axes: up to 30 m/min Tool changer: 24 positions MACHINE DETAILS Fpjdpfx Aoypcw Nsa Esd Control: Heidenhain TNC 426 PB Electrical connection: 400 V / 50 Hz Connected load: 32 kVA Fusing: 3x 63 A Weight: 8,500 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 16,981 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 700 mm, overall weight: 8,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis SPINNER MVC 1600 was manufactured in 2013. It features an impressive X-axis travel of 1600 mm, Y-axis travel of 810 mm, and Z-axis travel of 700 mm. The machine includes a robust table size of 1800 x 810 mm and a maximum workpiece weight of 2000 kg. If you are looking to get high-quality machining capabilities, consider the SPINNER MVC 1600 vertical machining centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 18 / 18 / 15 m/min • Table size: 1800 × 810 mm • Maximum workpiece weight: 2000 kg • Spindle torque: 109–1052 Nm • Tool magazine capacity: 24 tools • Tool changer condition: defective • Supply voltage: 400 V • Power supply: 3 / PE • Frequency: 50 / 60 Hz • Rated current (IB): 58 A • Nominal current (IN): 63 A • Hours: 16,981 h Additional equipment • Optional 4th axis for 10.000€ Technical Specification Taper Size SK 40 Fedpoypcfmefx Aa Espd

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5SS was manufactured in 2016. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and a 24-position tool magazine. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5SS vertical machining centre we have for sale. Contact us for further details. • T-slots: 7 • Max spindle torque: 122 Nm @ 2000 rpm • Rapid feed: 30 m/min • Tool magazine: 24 positions Technical Specification Fjdpjypb A Defx Aa Espd Taper Size ISO 40

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,440 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, feed length X-axis: 1,440 mm, feed length Y-axis: 600 mm, feed length Z-axis: 510 mm, nominal power (apparent): 39 kVA, controller manufacturer: Heidenhain, controller model: 530, workpiece height (max.): 500 mm, table width: 600 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, distance table to spindle center: 100 mm, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this used Deckel Maho DMC 144 V linear vertical machining center, year of manufacture 2003. Transformer power: 39 kVA Maximum current: 53 A Fodpfxoyn Eqve Aa Eepd Current: 63 A Supply voltage: 400 V Frequency: 50 Hz Auxiliary voltage: 230 V Control voltage: 24 V Year of manufacture: 2003 If you have any questions or require further information, please contact us by message or phone.

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Travel paths X/Y/Z: 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Fsdoynw Erjpfx Aa Espd Internal coolant supply 40 bar Chip conveyor Heidenhain measuring probe Blum laser system

Condition: good (used), Year of construction: 2006, Winmax control Travel X/Y/Z: 1270 x 660 x 610 mm Fpodpfxsynb T Hs Aa Esd Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Pocket milling with islands Synchronous thread cutting

Condition: good (used), Hurco VMX64 / 40T Serial No. M64406503066FHA Year of manufacture: 2006 Spindle hours: approx. 4,200 h Power-on hours: approx. 5,900 h !!! Control upgraded to WINMAX (software version 2016, 09.01.393.53) !!! DXF option and network connection Travel distances: X: 1625 mm Y: 860 mm Z: 760 mm Clamping surface: 1675 x 890 mm Table load capacity: 2,500 kg Power: 15.0 kW Max. torque: 237 Nm Fpsdpfx Aasym R T Hs Eod Spindle/table distance: 150 - 910 mm Weight: 15,000 kg Dimensions (W x D x H): 6340 x 4400 x 3150 mm Features: - BigPlus spindle with 10,000 rpm - KNOLL band filter system - High-pressure coolant (IKZ) 20 bar - Tool magazine (hydraulic chain magazine), 40 slots - SK40 spindle - Chip conveyor - 6 NC hydraulic vices ATORN (125mm) The machine is in very good condition and ready for immediate use. All backlash has been adjusted, so the geometry is excellent. The control has been upgraded to WINMAX. Price plus loading costs of €1,500 For transport, a truck with 3 m width is required!