Fiber Lazer Gravür Desen Sanayi Ticaret Anonim Şirketi

Condition: used, Year of construction: 2006, x-travel 630 mm y-travel 560 mm z-travel 560 mm table surface area 1000 x 600 mm spindle taper HSK 63 A spindle turning speed - stepless 18.000 U/min feeds x/y/z -stepless 0 - 30.000 mm/min rapid traverse 30 m/min no. of tools in magazin 2 x 12 workpiece diameter at full load 130 mm tool length - max. 315 mm weight of tools max. 8 kg internal coolant system feed 40 bar control HEIDENHAIN control MillPlus iT table load capacity max. 500 kg total power requirement 52 kVA weight of the machine ca. 6,5 t Kodpfjy Tyzuex Agtsdl dimensions of machine L x W x H 3,40 x 1,86 x 2,42 m Accessories: probe HEIDENHAIN, TS 640; electron. handwheel, mech. vice (jaw width 160 mm), chip conveyor, coolant with bandfilter

Condition: good (used), Year of construction: 2015, functionality: fully functional, Technical details x-travel 1050 mm y-travel 530 mm z-travel 630 mm Control Heidenhain TNC 620 table surface area 1150 x 560 mm tool taper SK 40 spindle turning speed range 10000 U/min rapid traverse 24 m/min total power requirement 25 kVA weight of the machine ca. 7,8 t dimensions of the machine ca. 4,3 x 2,4 x 2,9 m Additional information Working hours (date 10. February 2026): - Control on: 20811 h - Machine on: 13353 h - Programm cycle: 7412 h - Spindle hours : 5184 h Equipment: CNC control Heidenhain TNC 620 Electronic handwheel Heidenhain Tool measuring system Linear scales in all axes X/Y/Z Preparation for measuring probe Kdjdpfx Aey Tv Scogtel 30-station tool changer Coolant equipment with paper band filter system Internal coolant supply through the spindle 20 bar Blown air through the spindle Chip conveyor Machine documentation

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, therefore, very few spindle hours! - Pallet dimensions: approx. 320 x 320 mm - The pallets are clamped onto the rotary table. - Tool holder: HSK-E 40 - For further technical data, see the images. - Includes technical documentation. Ksdjy Tvcuopfx Agtedl - Includes HSK-E 40 tool holders and three pallets. Attention: The item must be collected between July 21st and July 23rd, 2026, on a date to be agreed upon. FCA D-80339 Munich - loaded onto a truck.

Condition: excellent (used), Year of construction: 2008, Opportunity to purchase this outstanding 5-axis HERMLE C30U including an additional tool magazine ZM157. This machine is in good condition with 20093 spindle hours on the counter. Machine can be inspected in operation upon appointment in the Belgium. Availability: 10/2026 Included: Magazine expansion: 157 positions (189 positions in total) Linear axes Standard version NC rotary table: ø280 6-fold rotary feedthrough A-axis position center Y = 300 IKZ 40-80 bar Scrap belt conveyor Blow-cleaning device Automatic cab door Manual cab roof Polycarbon safety windows Rotating transparent window iTNC electric heat compensation iTNC electronic handwheel BLUM Tool breakage detection A1 Coolant gun CNC control Heidenhain iTNC530 Ksdjy Tuluopfx Agtsdl Max. spindle speed 18,000 rpm Spindle taper HSK-A63 DIN 69063 Travel paths X-Y-Z 650- 600- 500 mm Tool Magazine extension 157 positions (189 positions in total) Tool diameter 80 mm Tool diameter with adjacent clearance 125 mm Max. tool length 300 mm Max. tool weight 8 kg Max. magazine load 1256 kg Table plate ø 280 mm Center bore ø 32 H7 Swivel range A-axis = +/- 115° / C-axis = 360° Table load capacity 300 kg Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, rapid traverse X-axis: 31 m/min, rapid traverse Y-axis: 31 m/min, rapid traverse Z-axis: 31 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 2,616 mm, total length: 2,965 mm, total width: 2,912 mm, table width: 400 mm, table length: 400 mm, table load: 227 kg, rotary table diameter: 400 mm, overall weight: 5,400 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 4,615 h, coolant supply: 30 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 50, tool length: 305 mm, tool diameter: 64 mm, tool weight: 5 g, Equipment: documentation/manual, rotational speed infinitely variable, Well-equipped and in excellent condition! That’s what this HAAS UMC-500SS offers. The machine comes from a one-man business and has always been exceptionally well maintained. Additional options & accessories: - 15,000 RPM, BT40 spindle - 50-tool magazine - Internal cooling - 30 bar - Air connection through the table for pneumatic clamps. - Chip conveyor - Electronic handwheel - Air through the spindle - Expansion of the control memory to 32 GB. Kdodpey Tmp Eefx Agtel - Filter for emulsion. - Programmable coolant nozzle - Option for high-speed machining in the control system. - Extra M-codes - Dynamic work offset and TCPC.

Condition: excellent (used), Year of construction: 2011, operating hours: 4,997 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,770 mm, total length: 3,300 mm, total width: 2,270 mm, table width: 560 mm, table length: 1,000 mm, table load: 1,350 kg, overall weight: 6,500 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,997 h, coolant supply: 18 bar, number of slots in tool magazine: 24, Equipment: chip conveyor, The GF AgieCharmilles Mikron VCE 1000 Pro (year of manufacture 2011) is a high-quality vertical machining center and is available in a very comprehensive configuration. The machine features a Heidenhain iTNC 530 control, travels of X 1020 / Y 560 / Z 600 mm, and a 1000 × 560 mm machine table. Equipped with a 24-tool magazine, a 10,000 rpm spindle, 18 bar internal cooling, and Renishaw workpiece and tool probes, the machine is ideally suited for precise milling operations in tool, mold, and general mechanical engineering. Spindle 10,000 min-1, ISO40 for internal cooling Preparation for measuring probe, infrared Measuring probe, infrared Renishaw OMP 40 Tool probing system Renishaw TS 27R Linear scale VCE1000Pro Kodpfxoy Tl Uge Agtjdl Band filter unit with suction pump Internal cooling unit, 18 bar Spray ring for spindle ISO/BT 40 Programmable coolant nozzle Mechanical oil/coolant separator Spray mist extraction Connection kit for rotary table Minimum quantity lubrication

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 570 mm, controller manufacturer: FANUC, total height: 2,937 mm, total width: 3,090 mm, table load: 300 kg, overall weight: 4,100 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, tool weight: 6,000 g, product length (max.): 3,216 mm, number of axes: 3, This 3-axis FAMUP MCP 60 E was manufactured in 2002. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 570 mm. The machine includes a table size of 500 x 450 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the FAMUP MCP 60 E vertical machining centre we have for sale. Contact us for further details. • Pallet/Table: • Table size: 500 x 450 mm • T-slots: 2 x 14 x 125 mm • Central bore: Ø50 H6 • Pallet change time: 9 s • Axis performance: • Working feedrate X/Y/Z: 10,000 mm/min • Rapid feedrate X/Y/Z: 30,000 mm/min • Working thrust S1 X/Y: 3,300 N • Working thrust S1 Z: 7,200 N • Measurement system: • Indirect measuring system • Accuracy: • Positioning accuracy X/Y/Z: ±5 µm • Repeatability X/Y/Z: ±1.5 µm • Reversal accuracy: 3 µm • Tool changer: • Selection: Bidirectional • Max. tool diameter: Ø75 mm • Max. tool length: 250 mm • Tool change time: 1.7 s • Chip-to-chip time: 2.5 s Kodpfx Agoy Tlz Hetedl Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2018, functionality: fully functional, Siemens 828 chop-mill Palett 650x400 mm X/Y/Z 560/360/480 mm 24.000 v/min, BT 30 Big plus Ksdpsy S Ubtofx Agtsdl ATC 20 pos.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, total height: 2,600 mm, table load: 700 kg, overall weight: 3,800 kg, spindle speed (max.): 22,000 rpm, number of axes: 3, This 3-axis Fidia CORTINI HS 644 was manufactured in 2001. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 400 mm. The machine has a maximum linear axis speed of 30 m/min and a robust table size of 1000 x 500 mm with a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the Fidia CORTINI HS 644 vertical machining centre. Contact us for further details. • Accuracy: • Positioning accuracy (ISO 230-2): 0.010 mm • Speeds: • Max linear axis speed: 30 m/min • Max acceleration: 3 m/s² • Table: • Dimensions: 1000 x 500 mm • T-slots: • Number: 4 • Width: 14 mm • Pitch: 140 mm • Electrical supply: • Standard: EN 60204-1 Kdodpfxjy S S A Ij Agtel • Voltage: 400 V • Frequency: 50/60 Hz • Pneumatic supply: • Standard: PNEUROP 6611 • Pressure: 0.7 MPa ±10% (7 bar ±10%) • Footprint: 2150 x 2450 mm • Environmental conditions: • Ambient temperature: 10–40 °C • Relative humidity: 10–80% (non-condensing)

Condition: good (used), Year of construction: 2001, operating hours: 3,700 h, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: TNC 430, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,400 h, coolant supply: 10 bar, number of spindles: 1, number of slots in tool magazine: 21, Equipment: rotational speed infinitely variable, Vertical BAZ MIKRON VC 500 with internal cooling, 10 bar Kdsdpfxoy S Rmxe Agtjl Year of manufacture: 2001 Control system: Heidenhain 430 TNC Operating hours: 3,300 hours Technical data: Spindle speed: 0 - 10,000 rpm Drive power: 13 kW Tool holder: SK 40 Number of magazine positions: 21 pcs. Travel ranges: X-axis: 510 mm Y-axis: 510 mm Z-axis: 560 mm Table size: 650x600 mm Accessories: - Internal coolant system with 10 bar - Chip conveyor - Electronic handwheel - Renishaw 3D probe - Oil mist extraction - Rotoclear The machine was used in a training workshop – in very good condition!

Condition: used, HERMLE C 600 V is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 800×465 mm, travels X 600 / Y 450 / Z 450 mm, table load max 200 kg; tool changer 30 stations, spindle taper HSK‑A63. Spindle 20–16,000 min⁻¹, spindle power 15 / 10 kW; feed 1–30,000 mm/min, rapid 35 m/min, max feed force 6000 N. Supply 3×400 V 50 Hz, total power 35 kVA, weight ≈6800 kg, size 2500×2020×2750 mm, noise 78 dB(A). Coolant through spindle 40 bar. Achieves tight tolerances; typical sectors: automotive, aerospace, medical, watchmaking, tooling. Kodpey S Dddjfx Agtodl

Condition: ready for operation (used), Year of construction: 2002, operating hours: 13,028 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, total height: 2,450 mm, table width: 2,400 mm, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, product length (max.): 3,000 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO 64V Linear was manufactured in 2002. It features an X-axis travel of 640 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a table clamping surface of 850 × 600 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 64V Linear vertical machining centre we have for sale. Contact us for further details. • Rapid Traverse (X / Y / Z): 30 m/min • Max. Feed Rate: 20000 mm/min • Table Clamping Surface: 850 × 600 mm • Max. Table Load: 600 kg • Automatic Tool Changer (ATC) Magazine Capacity: 30 stations • Max. Tool Diameter: 80 mm (140 mm with adjacent pockets empty) • Max. Tool Length: 300 mm • Max. Tool Weight: 7 kg • Spindle Speed Range: 20 – 8000 rpm • Tool Taper: SK 40 / ISO 40 • Spindle Power (100% / 40% ED): 13 kW / 19 kW • Max. Spindle Torque: 140 Nm Kedpfoy S Azhex Agtodl Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2018, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 465 mm, YEAR 2018 MODEL VC 3600 CNC FANUC i Series Specifications X-axis travel: 520 mm Y-axis travel: 360 mm Z-axis travel: 465 mm Table size: 650 x 375 mm Kjdpfx Ajy Sh Adsgtsdl Table load capacity: 500 kg Spindle speed: 12,000 rpm Spindle power: 5.5/7.5 kW Tool holder: BT 40 Tool magazine: 20 positions Accessories Adapter with D’Andrea TRM/50 boring head Gerardi vice 345x120 mm Machine is supplied with manuals and EC Declaration of Conformity. All technical data given is indicative and may be subject to change without notice. Therefore, the details are not binding.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, DMG MORI ecoMill 600 V Kdodjy Saazspfx Agtjl Year of manufacture: 2016 Control unit: SIEMENS 840D Travels: 600 x 560 x 510 mm Table size: 900 x 560 mm Spindle mount: SK40 Max. spindle speed: 12,000 rpm Tool changer: 30 positions Total weight: 5,000 kg Various accessories

Condition: good (used), Year of construction: 1998, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, table width: 420 mm, table length: 840 mm, spindle speed (max.): 6,000 rpm, Table size 840 x 420 mm Travel X/Y/Z: 600 / 410 / 520 mm Spindle SK 40, speed up to 6000 rpm Main drive 8.5 kW Tool changer with 22 stations Control: Heidenhain TNC 370 Including coolant system Kodey R Um Topfx Agtodl

Condition: used, Year of construction: 2004, Deckel Maho DMC 70 V – Vertical Machining Centre Kodey R E H Depfx Agtsdl Offered here is a used vertical CNC machining centre Deckel Maho DMC 70 V equipped with Heidenhain TNC 426 control. Technical specifications: Type: Vertical machining centre, 3-axis Travel X/Y/Z: 700 / 500 / 500 mm Table size: approx. 750 x 500 mm Spindle speed: up to 8,000 rpm Tool changer: Chain magazine Control: Heidenhain TNC 426 Operating voltage: 400 V / 50 Hz Manufacturer: Deckel Maho GmbH, Pfronten Condition: Used, on-site inspection possible

Condition: good (used), Year of construction: 2015, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, x-axis travel 635 mm y-axis travel 510 mm z-axis travel 460 mm Control system SLIMline Siemens Main spindle speed range 20 - 12,000 rpm Main spindle drive power 13 / 9 kW Torque 83 / 57 Nm Tool holder SK 40 Clamping surface of table 790 x 560 mm Number of T-slots 4 + 1 T-slot width 4 x 14H12 / 1 x 14H7 mm T-slot spacing 100 mm Max. table load 600 kg Table height above floor 720 mm Kdedpfxoy Rzbwj Agtjl Number of tool stations 20 pos. Max. tool diameter 80 mm Max. tool diameter with free adjacent slot 130 mm Max. tool length 300 mm Max. tool weight 6 kg Total tool weight approx. max. 60 kg Feed rate max. 20,000 mm/min Rapid traverse 30 m/min Total power requirement 17 kVA Machine weight approx. 4.0 t Space requirement approx. 4.5 x 4.0 x 2.8 m ICS 12 bar Chip conveyor Preparation for 4th axis (rotary table)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 1,100 mm Travel Z-axis: 500 mm C-axis rotation: 360° MACHINE DETAILS Control: CNC Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Kodpfx Agsy Rxryjtodl Net weight: 13,000 kg EQUIPMENT Chip conveyor Tool magazine Probe

Condition: excellent (used), Year of construction: 2000, operating hours: 1,100 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, table load: 500 kg, overall weight: 2,700 kg, spindle speed (max.): 12,000 rpm, FOR SALE: VMC 600/22 Vertical Machining Center – Upgraded High-Speed Unit A high-performance, extensively upgraded vertical machining center is available for sale. This machine has undergone significant technical modernization, greatly increasing its speed and reliability compared to standard models. Key Upgrades: - Control System Retrofit (2018): Completely modernized CNC for improved reliability and efficient programming. - High-Speed Spindle: Upgraded to a 12,000 rpm spindle (replacing the standard 6,000 rpm unit). The new spindle has only approximately 300 operating hours. Technical Data: - Travel paths: X: 600 mm, Y: 410 mm, Z: 520 mm - Worktable: 840 x 420 mm (max. load: 500 kg) - Tool changer: 22-position tool magazine - Rapid traverse rates: X/Y 40 m/min, Z 20 m/min - Spindle taper: BT 40 - Machine weight: approx. 2,700 kg This VMC is a production-ready powerhouse. Thanks to the high-speed spindle upgrade, it is perfectly suited for modern high-speed machining and efficient material removal. Kdjdpfxey Rvdtj Agtsl

Condition: ready for operation (used), Year of construction: 2001, operating hours: 8,200 h, functionality: fully functional, machine/vehicle number: 28850018432, TECHNICAL DETAILS Tool diameter: max. 140 mm Speed at maximum diameter, max.: 6,500 rpm Balancing quality according to DIN ISO 1940: G 6.3 Tool Magazine Number of tools: 24 Tool diameter, standard tools: max. 80 mm Tool diameter, special tools with adjacent positions free: max. 140 mm Tool length: max. 300 mm Tool weight: max. 7 kg Magazine load: max. 72 kg Table Clamping surface with T-slots DIN 650-14: 800 x 500 mm Loading height, top of table: 850 mm Workpiece height: max. 240 mm Table load capacity: max. 500 kg Coolant System Tank capacity with standard chip container: 150 l Tank capacity with spindle cooling: 80 l Pump performance standard, flow rate: 30 l/min Pump performance standard, pressure: 1.2 bar Tank capacity with chip conveyor option: 750 l Pump performance, chip conveyor option, flow rate: 40 l/min Pump performance, chip conveyor option, pressure: 3.0 bar Tank capacity including chip conveyor: 750 l Pump performance, internal coolant supply, flow rate: 30 l/min Pump performance, internal coolant supply, pressure: 15 bar Chip Disposal Chip conveyor discharge height: 850 mm Chip conveyor type: scraper belt MACHINE DETAILS Rated power: 30 kVA Rated current: 42 A Delayed main fuse: 3 x 50 A Operating voltage: 400 V Frequency: 50 Hz Compressed air connection: 6 bar Required system delivery rate: 38 Nm³/h Ambient temperature: +5 to +40 °C Average temperature over 24 h: +35 °C Relative humidity: 30–95 % Dimensions & Weight Transport dimensions of the machine with table (L x W x H): 3.1 x 2.1 x 2.4 m Transport weight: approx. 4,200 kg Mounting elements: 4 x BNV 150/4 EQUIPMENT Fixed station coding Vertical tool changer Ksdpfxjy Rta Es Agtjdl Pick-up system via work spindle Coolant system Spindle cooling Chip conveyor Internal coolant supply Mounting elements BNV 150/4

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Kodjy Rpa Ijpfx Agtsdl Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: good (used), travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, controller manufacturer: Röders, table width: 700 mm, table length: 900 mm, spindle speed (max.): 36,000 rpm, operating hours of spindle: 100 h, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Precision machining center Röders Tec RP 800 Year of manufacture: 2005 Control: Röders Tec Spindle speed: 35,000 rpm Spindle has been overhauled – approx. 100 hours run time Drive power: 17 kW Tool holder: HSK 50 Number of magazine slots: 30 Internal coolant supply: 20 bar X-axis: 800 mm Y-axis: 600 mm Z-axis: 400 mm Equipment: Chip conveyor Coolant system 3D probe Kdsdoy Rgalepfx Agtjl Electronic handwheel

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 610 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, table width: 450 mm, table length: 800 mm, spindle speed (max.): 8,000 rpm, Model: 610L Control: Fanuc Series Oi-MC Year: 2012 Table Area: 800 x 450mm ‘X’ Axis: 610mm ‘Y’ Axis: 460mm ‘Z’ Axis: 450mm Spindle Taper: BT 40 Spindle Speeds: 8000 RPM Carosel 12 Station Tool Changer Kedpoy N Uh Uefx Agtsdl Dimensions: 2200 x 2300 x 2300mm high Weight: 3400 KGS

Condition: excellent (used), Year of construction: 2007, Controller Mitsubishi 64S Travel X/Y/Z 600 x 400 x 460 mm Table size 700 x 410 mm Table load capacity 250 kg Spindle speed 12,000 min⁻¹ Tool magazine for 24 tools, BT 40 Kodpfxoy N D Hgo Agtsdl Internal coolant 20 bar Exhaust system Chip conveyor

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 300 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of spindles: 1 Table width: 405 mm Table length: 405 mm Max. table load: 800 kg Number of tool magazine slots: 26 MACHINE DETAILS Control system model: RMS6, version 3.18 Input voltage: 400 V Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg EQUIPMENT Documentation/manual Infinitely variable spindle speed control Chip conveyor Blum laser 3D tool setter Hirschmann 9000 zero-point clamping system Electronic handwheel Kdodpjy Nzuhsfx Agtsl Extor extraction system