Technische Dienstleistungen Stephan Unger

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, turning diameter: 12 mm, rotational speed (max.): 8,000 rpm, bar passage: 12 mm, TECHNICAL DETAILS Spindle speed (max.): 8,000 rpm Turning diameter: 12 mm Bar capacity: 12 mm Control: Fanuc EQUIPMENT - Bar feeder FMB Turbo 2-16 / 3200A Lslhccjwur Shjqqohh - Chip conveyor

Condition: excellent (used), FANUC 0i-TD control Turning diameter 20mm Turning lenght 210mm Spindletaper F25 Lelhccowud Uboqqehh Spindlespeeds 200-12'000 rpm Bar loader Misc. accessories MARCELS MASCHINEN AG

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Lhelhccewuddvjqqoh Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: like new (used), Year of construction: 2011, operating hours: 37,209 h, Functionality: fully functional, - Parts conveyor belt for parts discharge - Parts gripper - Coolant tank with belt filter - High-pressure pumps approx. 50 bar for external and internal tool cooling - Bar feeder FMB Minimag 20 with channel Ø20 and exchangeable channel Ø16 - Chip conveyor (cable drag) - Kraft & Bauer CO² extinguishing system Drive main spindle: motor spindle Spindle head Max. bar capacity 18 (20) Max. Z1 stroke Long/short turning: 205 / 80 Counter spindle with lower tool station Max. bar capacity 18 Max. X/Z travel: 120 / 250 Upper turret Stations: 8 Axes X / Y / Z / B / H Lower turret Stations: 7 Axes X / Y / Z / H Backworking unit Stations: 7 Number of sub-systems: 2 Number of tools Maximum simultaneous engagement: 3 Number of CNC linear axes: 7 Tool magazine: 22 Max. tool magazine with triple tool holders: 52 Lholhswuc Awoccqqsh Tool shank diameter upper turret: 45 Tool shank diameter backworking unit: 36

Condition: like new (used), Year of construction: 2011, operating hours: 30,000 h, Functionality: fully functional, - Parts conveyor for part discharge - Parts gripper - Coolant tank with band filter - High-pressure pumps approx. 50 bar for external and internal tool cooling - FMB Minimag 20 bar feeder with Ø20 channel and interchangeable Ø16 channel - Chip conveyor (cable drag chain) - Kraft & Bauer CO² extinguishing system Main spindle drive: motor spindle Spindle head Max. bar capacity: 18 (20) Max. Z1 stroke Swiss-type / standard lathe 205 / 80 Sub-spindle with lower tool position Max. bar capacity: 18 Max. X/Z travel: 120 / 250 Upper turret Stations: 8 Axes: X / Y / Z / B / H Lower turret Stations: 7 Lslhcewucvkscqqehh Axes: X / Y / Z / H Rear unit Stations: 7 Number of subsystems: 2 Number of tools Max. simultaneously in cut: 3 Number of CNC linear axes: 7 Tool storage: 22 Max. storage with triple tool holders: 52 Tool shank diameter / turret: 45 Tool shank diameter / rear unit: 36

Condition: ready for operation (used), Year of construction: 2011, General Data Lhjlhswtt Aljccqqoh Measurements width 1500 Measurements depth 2000 Measurements height 2000 Machine weight 3300 Control Unit Brand FANUC Model 31i Model A Main Drive Spindle speed range 8000 Number of axis 9 Additional Equipment Counter spindle Subspindle Loader: 3000 mm Spindle clearance: 30 mm This 9-axis TSUGAMI HS207 swiss type turning machine was manufactured in 2011. Ideal for precision turning, this machine offers robust performance and reliability. Consider the opportunity to buy this TSUGAMI HS207 swiss type turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2014, operating hours: 31,316 h, Control Unit Brand FANUC Model 0i-TD Additional Equipment Lolhccjwttuusqqjhh Part ejection safety lock / Part ejection device (spring type) / Blow-off device for guide bushing and sub-spindle / Standalone coolant tank with level monitoring / Probe / Automatic central lubrication unit with level monitoring / Interface for bar feeder / RS232C interface / RJ45 / USB The machine was used for serial production of small parts with extreme precision from standard relatively soft material. The machine was not dynamically stressed, production was carried out on oil. Service was regular, with almost continuous replacement of bearings, all in perfect condition. MBC (BROXTEC) chip conveyor / Workpiece conveyor belt / FMB Minimag 3200 bar feeder (⌀ 8) This 5-axis Star SB-20R type N was manufactured in 2014, featuring a CNC Fanuc 0i-TD, C-axis on both main and sub-spindles, and a 6-position tool holder. It includes a 5-spindle unit for cross drilling, a sub-spindle with a 20mm part picking capacity, and a standalone coolant tank. Ideal for precision small parts production. If you are looking to get high-quality turning capabilities, consider the Star SB-20R type N machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 1600 mm Measurements depth 2300 mm Measurements height 2000 mm Machine weight 2800 kg Control Unit Lolhcswtt Afscqqjhh Brand FANUC Model FS18i-TA Main Drive Spindle speed range 6000 rpm Spindle bore 32 Number of axis 7 Turret Number of turrets 1 Tool taper 16/16 Additional Equipment Subspindle: Yes Loader: Yes, 3000 mm This 7-axis TSUGAMI Mori B32(S)-III swiss type turning machine was manufactured in 2007. Ideal for precision turning, it features advanced control for intricate part production. If you are looking to get high-quality turning capabilities, consider the TSUGAMI Mori B32(S)-III machine we have for sale. Contact us for more information. Application Types Turning

Condition: like new (used), Year of construction: 2015, Very well-maintained CNC Swiss-type lathe with approx. 3400 hours Maximum diameter: 38 mm Length: 320 mm Spindle speed: 7000 rpm 2 x C axis Chip conveyor Y2 axis with 4 fixed and 4 driven tools Air blower Tool breakage monitoring Fire extinguishing system Oil mist separator Iemca bar feeder Lhsljwtrgishccqqoh

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 211S, rotational speed (max.): 3,000 rpm, bar diameter: 65 mm, collet bore: 150 mm, TECHNICAL DETAILS Max. bar capacity: 65 mm Front spindle bearing diameter: 110/150 mm Collet clamping system up to Ø: 60 mm HAINBUCH collet system up to Ø: 65 mm Maximum spindle speed: 3,000 rpm Main spindle motor power: 11/15 kW Main Spindle Number of tools: 8 VDI-30 Maximum working stroke in Z: 50 mm Rapid traverse speed: 15 m/min Feed force: 6,790 N Cross Slide Number of horizontal slides: 2 Maximum working stroke at X1/X2: 70 mm Feed force at X1/X2: 8,000 at 50 bar Maximum working stroke on Z1: 230 mm Turret Number of tools: 8 VDI-20 Vertical Slide Number of vertical slides: 2 Maximum working stroke at X3/X4: 70 mm Manual length adjustment: 50 mm Rapid traverse speed: 15 m/min Feed force at X1/X2: 8,000 at 50 bar MACHINE DETAILS Machine height: 1,700 mm Footprint: 2,900 x 1,700 mm Machine weight: 4,100 kg Voltage: 380 V Frequency: 50 Hz Lolhccqswtq U Eeqshh Power: 22 kVA

Condition: ready for operation (used), Year of construction: 2005, operating hours: 6,797 h, Control Unit Brand FANUC Model 21i-TB Lolhcswtix Ajcqqehh Additional Equipment Door monitoring / Spindle clamping device for the main spindle / Main spindle indexing 15° (not applicable for 480S) / Work light / Disconnect switch (control current: 30mA, available as an option for 480A) Tool set This Star SB-16 was manufactured in 2005. It features a robust FANUC control system, separate coolant tank, automatic central lubrication, and a 6-station tool holder. Ideal for precision turning, it includes a 4-spindle drill holder and a comprehensive workpiece removal system. Consider the opportunity to buy this Star SB-16 swiss type turning machine. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2014, Functionality: fully functional, CNC sliding head lathe Star SR10J Year of manufacture: 2014 Ljlhccqjwtgxteqjhh Bar feeder FMB minimag 20 Chip conveyor

Condition: good (used), Year of construction: 2003, machine/vehicle number: 0612, spindle motor power: 2,200 W, turning length: 85 mm, turning diameter over cross slide: 16 mm, spindle speed (max.): 9,000 rpm, turning diameter: 16 mm, overall weight: 1,700 kg, - 6-axis long lathe - with bar loading magazine/ Lelhswtftpsccqqehh - Number of tools - Driven tool stations - Rear side device - Max. clamping diameter - Max. part length - Spindle speed - Spindle drive - Max. drilling capacity - Max. thread cutting capacity - Equipment: - C-axis - Lighting - Hydraulic unit - Coolant system - Compressed air system - Central lubrication - Door monitoring - 4-spindle drilling app.

Condition: good (used), Year of construction: 2005, machine/vehicle number: 0742, spindle motor power: 2,200 W, turning length: 85 mm, turning diameter over cross slide: 16 mm, spindle speed (max.): 900 rpm, spindle speed (min.): 500 rpm, turning diameter: 16 mm, overall weight: 1,700 kg, 6-axis long lathe Number of spindles 2 Length of bars for the bar loader: 3,200 mm Turning diameter maximum 16 mm Drilling diameter max. 7 mm Thread diameter max. M 6 (metric) Spindle speeds: Continuously variable from 500 rpm to 12,000 rpm Spindle power 2.2 kW Counter spindle speeds: from 500 rpm to 9,000 rpm Tapping diameter M 6 (metric) Workpiece length for counter machining max. 85 mm Speed of driven tools 7,500 rpm Power of rotating tools 0.4 kW Drilling diameter max. 4 mm Tapping diameter M 3 (metric) Tool shaft cross-section 10 mm Collet holder type ER 11 Rapid traverse 20 m/min Cutting speed 10000 mm/min Connection 50 Hz 3x 400 Volt Spindle motor 2.2 / 3.7 kW Power of the counter spindle 1.1 / 0.5 kW Connection to compressed air 5 bar Total power requirement 6 kVA Machine weight approx. 1700 kg Control: Fanuc Series 18i - TB Lslhcjwtdufjcqqohh

Condition: good (used), Year of construction: 2007, machine/vehicle number: 0835, spindle motor power: 2,200 W, turning length: 85 mm, turning diameter over cross slide: 16 mm, spindle speed (max.): 900 rpm, spindle speed (min.): 500 rpm, turning diameter: 16 mm, overall weight: 1,700 kg, - 6-axis long lathe - with bar loading magazine/ - Number of tools - Driven tool stations - Rear side device - Max. clamping diameter - Max. part length - Spindle speed - Spindle drive - Max. drilling capacity - Max. thread cutting capacity - Equipment: - C-axis - Lighting - Hydraulic unit - Coolant system Lhslhowtdthjccqqoh - Compressed air system - Central lubrication - Door monitoring - 4-spindle drilling app.

Condition: good (used), Year of construction: 2005, machine/vehicle number: 0741, spindle motor power: 2,200 W, turning length: 85 mm, turning diameter over cross slide: 16 mm, spindle speed (min.): 200 rpm, turning diameter: 16 mm, overall weight: 1,700 kg, 6-axis long lathe Manufacturer: Star + FMB Type: SA-16-RC + turbo 2- 16 Year of manufacture: 2005 Control: Fanuc Series 18i - TB Number of spindles 2 Turning diameter maximum 16 mm Drilling diameter max. 7 mm Thread diameter max. M 6 (metric) Spindle speeds: Continuously variable from 500 rpm to 12000 rpm Spindle power 2.2 kW Dplgq9 Counter spindle speeds: from 500 rpm to 9000 rpm Tapping diameter M 6 (metric) Workpiece length for counter machining max. 85 mm Speed of driven tools 7500 rpm Power of rotating tools 0.4 kW Drilling diameter max. 4 mm Lslhjwtdpcsccqqohh Tapping diameter M 3 (Metric) Tool shank cross-section 10 mm Collet holder type ER 11 Rapid traverse 20 m/min Cutting speed 10000 mm/min Connection 50 Hz 3x 400 volts Spindle motor 2.2 / 3.7 kW Power of the counter spindle 1.1 / 0.5 kW Connection to compressed air 5 bar Total power requirement 6 kVA Machine weight approx. 1700 kg Length of the bars for the bar loader: 3,200 mm

Condition: good (used), Year of construction: 2022, Universal Machining Center Machine type: DMG DMF 360 / 11 Control: Heidenhain TNC 640 Celos Year of manufacture: 2022 TECHNICAL DATA: Lhelhccqswtdgneqeh Travel: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm B-axis C-axis Number of controlled axes: 5 Dynamics package for DMF 360 linear (Y1100) Rapid traverse (X/Y/Z): 80 / 60 / 60 m/min Spindle speed range: 20 - 10,000 rpm Drive power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK 50 Tool changer Tool stations: 120 NC rotary table Table size: 4,200 x 1,100 mm Max. table load: 1,200 kg Equipment features: Internal coolant supply (IKZ): 40 bar Coolant tank: 980 l Chip conveyor Chip flushing gun Oil mist extraction Air through spindle center Touch probe: Heidenhain TS 460 Prepared for 3D quickSet Automatic doors Electronic handwheel

Condition: good (used), Year of construction: 2018, Machining diameter - 20mm Drilling diameter - main spindle 10mm Tapping diameter - main spindle M8 Lhslswtc U Rjhccqqsh Drilling diameter - rotary tool 7mm Tapping diameter - rotary tool M6 Chuck diameter - back spindle 20mm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 4,430 h, Control Unit Brand FANUC Model 31i-Model B5 Lhelhcswr Nzuecqqoh This 11-axis Star SV-38 R was manufactured in 2015. A CNC precision sliding headstock automatic lathe, it features a maximum bar diameter of 38 mm and spindle speeds up to 7,000 rpm. With rapid traverse rates up to 30 m/min and a robust 4,300 kg frame, it's designed for efficient, high-precision machining. If you are looking to get high-quality turning capabilities, consider the Star SV-38 R machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2017, operating hours: 7,183 h, Control Unit Brand FANUC Ljlhccowr N Aleqqshh Model 31i-Model B5 Additional Equipment Bar loader FMB / Knoll cooling lubricant system / Complete documentation available This 12-axis Star SR-38 type B was manufactured in 2017 and features a maximum bar diameter of 38 mm and a turning length of 320 mm. It operates with a spindle speed up to 7,000 rpm and a main spindle power of 11 kW. Equipped with a Fanuc Series 31i-Model B5 control, it also includes a bar loader FMB and a Knoll cooling lubricant system. If you are looking to get high-quality turning capabilities consider the Star SR-38 type B machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 1177 mm Measurements depth 2070 mm Measurements height 1760 mm Machine weight 1750 kg Control Unit Brand FANUC Model 0i-TF Plus Lslhccqswr Nz Ioqehh Main Drive Spindle speed range 10000 rpm Spindle motor power 2.2 kW / 3.7 kW Number of axis 7 Turret Number of turrets 2 Media Power consumption 3.7 kVA Additional Equipment Units Available: 3 This 7-axis Star SB-20R type G was manufactured in 2020, featuring a Fanuc Oi-TF Plus CNC control and a rapid traverse speed of 35 m/min. It has a coolant tank capacity of 180 liters and can handle a maximum machining diameter of 20 mm. Ideal for precision turning, this machine weighs 1750 kg and has dimensions of 2070 × 1177 × 1760 mm. Consider the opportunity to buy this Star SB-20R type G swiss type turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 1350 mm Measurements depth 2330 mm Measurements height 1720 mm Machine weight 2300 kg Control Unit Brand FANUC Model 31i-Model B Main Drive Number of spindles 2 Spindle speed range 10000 Spindle motor power 3.7 kW Lolhccqowr Nzzjqohh Number of axis 5 This 5-axis Goodway SW-20 swiss type turning machine was manufactured in 2020, featuring a maximum machining diameter of φ20 mm and a headstock stroke up to 207 mm. It offers rapid feed rates up to 24 m/min and spindle speeds reaching 10,000 RPM. Dimensions are 2,330X1,350X1,720 mm with a weight of 2300 Kg. Consider the opportunity to buy this Goodway SW-20 swiss type turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2006, operating hours: 93,424 h, This 7-axis TRAUB TNL 26 K was manufactured in 2006. A CNC sliding headstock automatic lathe, it features a max turning diameter of 32 mm, bar capacity of 32 mm, and dual spindle speeds up to 8,000 rpm. With 24 tool positions and a robust design, it's ideal for precision machining. If you are looking to get high-quality turning capabilities consider the TRAUB TNL 26 K machine we have for sale. Contact us for more information. Lslhcewruc Rscqqjhh Application Types Turning

Condition: good (used), Year of construction: 2019, Functionality: fully functional, load capacity: 21 kg, 8mm Lorch KD-50 High Precision Watch Lathe Lhslhjwrn Eroccqqsh Powered by Georgii-Kobold motor (see photo) No other accessories Excellent condition (video shows operation) Weight approx. 21 kg

Condition: ready for operation (used), Year of construction: 2006, General Data Ljlhcewqtfbjcqqohh Machine weight 2100 kg Control Unit Brand FANUC Main Drive Spindle speed range 15000 Spindle motor power 3.7 kW Number of axis 6 Additional Equipment Bar Loader (IEMCA) This CITIZEN Cincom K16 VII Swiss Type Turning machine was manufactured in 2006 in Germany. It is equipped with a FANUC control unit. The machine has a spindle speed of 15000 rpm. It comes with a IEMCA GENIUS 118 37 LL bar loader. Check image and video gallery for more details. Application Types Turning