Aiko Group Sp. Z O.o.

Condition: used, functionality: fully functional, 2-shaft forced-action mixer Working dimensions (internal) approx. 3,500 x 900 mm Dsdpfszr Hfuox Akvjkr 132 kW electric drive with heavy-duty gearbox New electric control cabinet Steel construction

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, total height: 1,520 mm, total width: 1,000 mm, total length: 1,800 mm, overall weight: 700 kg, Cable stripping machine Pecher PR3 Evolution Dkodezry Euepfx Akvjr Completely overhauled in 2026. Condition: as new. Motor power: 4 kW / 380 V Stripping speed: 44 m/min Working range: 1.5 mm² – 90 mm Ø Weight: approx. 700 kg Dimensions: W 1000 x L 1600 x H 1520 mm

Condition: used, machine/vehicle number: 13391, Length of magnetic grinding table = 1300 mm Drive = 13.5 kW Magnetic table can be swiveled Djdpfx Akezrikyevskr Ideal for re-sharpening rotor and stator blades Water cleaning with filter cloth

Year of construction: 2001, condition: ready for operation (used), Press force: 16t, Feed opening dimensions X/Y: 1100mm/590mm, Chamber dimensions X/Y/Z: 1100mm/700mm/1130mm, Bale dimensions X/Y/Z: 1100mm/700mm/950mm, Max. bale weight: 200kg, Tying: 4-way vertical, Throughput: approx. 4-8 bales/h, Machine dimensions X/Y/Z: approx. 1450mm/950mm/2400mm, Weight: approx. 950kg. No UVV inspection and the hydraulic oil has been drained. The baler has not been cleaned. An on-site inspection is possible. Dodpfx Akszp Rhbsvskr

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Dkjdpfx Akjzp H R Esver Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Haas scraper chain conveyor in very good condition. Equipped with 2 flights. See PDF file for sketch. Dodpjzn N Udefx Akvokr Trough inner width 600 mm. Drive via geared motor with 4.0 kW.

Year of construction: 2025, operating hours: 300 h, condition: excellent (used), functionality: fully functional, EYS 5 screening machine, model year 2025, with very few operating hours; fully functional and ready for work. Dsdpfozn H U Ujx Akvokr

Year of construction: 2015, operating hours: 4 h, condition: used, functionality: fully functional, Equipment: CE marking, The equipment neutralizes hazardous gases specified in the requirements provided by the owner to secure emission of clean air. Dksdpfszmqv Hsx Akver Sold as a complete system together with the chemical reactor, the electrolytic block and the waste water treatment system. The whole system is suitable for obtaining and cleaning of Cu, Au, Ag, Pd, Pt. The system includes 12 transformers for electrolytic baths (including 84 baths), complete pipe system, installed, can be tested and inspected. It contains neutralizer and automatic operation system. It was operating 2-4 hours during test run. The whole system is in new state.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 323, input frequency: 50 Hz, input voltage: 400 V, type of input current: three-phase, Used but fully functional screw compactor model Runi SK240. Have been used to compact and dewater plastics. New control cabinet in 2024. Operating hours < 1000 as it has been used in R&D before purchace of SK370. The screws hardfacing needs a re welding as it is worn on the outside. This is part of regular maintainence. Motor, bearing and gear sound great. Can be show in operation. Dedpfozmp Izex Akvjkr

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused Dsdpfjzmdb Asx Akvokr

Condition: ready for operation (used), Press force: 420kN, specific pressing force: 60N/cm², motor power: 22kW, max. theoretical throughput: 2000kg/h, filling height: 950mm, bale dimensions: 1000x720x1200mm, max. bale weight: 600kg, width: 2000mm, height: 2150mm. An on-site inspection is possible. Djdpfxezk Nars Akvjkr

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, The machine is operational. Sandblasting and repainting of the paintwork and other parts are available for an additional charge upon request. Serviced. Last service: April 2025. Operating manual available. Deutz 6-cylinder engine, 240 hp. Dimensions (length/width/height): 3.45/4.65/3.35 m. Dksdjzkrrwopfx Akvsr Operating dimensions: Wavelength 3.88 m, diameter 1.0 m. Weight: approx. 10,000 kg. Delivery rate: 300–2,500 m³. Mileage: unknown, odometer defective. Upon request, we will gladly send you a short video of the machine in operation.

Year of construction: 2020, condition: ready for operation (used), A paper and cardboard baling press Bema is available. Motor power: 2.2kW, pressing force: 20t, opening dimensions X/Y: 596mm/1200mm, bale dimensions X/Y/Z: 1200mm/800mm/1000mm, max. bale weight: 300kg, cycle time: 40s, hydraulic oil filling: 24l, machine dimensions X/Y/Z: approx. 1800mm/1100mm/1950mm, weight: approx. 1150kg. Documentation available. An on-site inspection is possible. Dkedozfp Hzopfx Akver

Year of construction: 2021, operating hours: 2,800 h, condition: excellent (used), Loading ramp, dimensions L x W x H: 10,000 x 5,000 x 950 mm in excellent condition, hardly used very robust construction Dkjdpfx Ajzffu Iskver

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 170.012.100, Brand new Holmatro hydraulic shears. Perfect for auto recyclers, for cutting catalytic converters, etc. The shears are brand new, manufactured in 2024, but have never been used. Dkedszcyrwjpfx Akvsr Includes a complete service kit.

Condition: used, Article: Chip processing system Manufacturer: Lanner Type: Vetamat DS32 Yob: 2010, in 2025 completely refurbished The patented Vetamat system reliably separates metal chips from coolant. The systems achieve a throughput of up to 2,000 kg/h. The complete systems include a centrifuge, a chip conveyor with tank, a sump, and a control system. Depending on the type of material, you can choose between a parabolic centrifuge or a scraper-bottom centrifuge. Thanks to the modular system, the Vetamat system can be optionally expanded with a chip crusher, a large-part sluice, or a lifting & tipping device, as well as coolant treatment. - Very short commissioning time - Turnkey design - Minimal space requirements - Excellent accessibility Dksdpfxjzcyfws Akvjr - Modular system - Mounted on a WHG-compliant oil-tight sump - High operational reliability - Proven Lanner technology - Fully automatic operation with standby function - Expandable for long chips and coolant cleaning - Chip container under the centrifuge can be loaded from three sides Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), Floating pontoon made from gravel extraction. Dedpfxozck A Ts Akvekr

Year of construction: 2018, condition: good (used), For sale: a machine for pelletizing. ARtechnic PBPe.500x-k. Dkjdpfoy T Itxox Akvjr

Year of construction: 2012, condition: good (used), functionality: fully functional, Rotary Airlock Valve / Rotary Valve Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge strips Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Max. volumetric flow: 28,000 m³/h Max. inlet diameter: 450 mm Speed: 22 rpm Rotor width: 1,500 mm Rotor diameter: 1,200 mm Dimensions: 2,200 x 2,200 x 2,500 mm (LxWxH) Weight: approx. 3,000 kg Remarks: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video above on our website or on our YouTube channel. Inspections, including under power, are possible at any time by prior arrangement. We are happy to answer your questions about the machine by phone, Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the stated information or possible errors. Offers are non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex-works, advance payment required, without warranty or guarantee. Dsdpfxoy Tiago Akvekr

Condition: used, overall weight: 10,000 kg, power: 55 kW (74.78 HP), Electro-Hydraulic orange peel grab, 6tines, weight 10000kg, about 6m3, with radiation meter Dkodpoy Ia H Tsfx Akver

Condition: new, This machine can process cables up to 120 mm in diameter – at a rapid 40 meters per minute! A 400-volt power supply and 3 kW output require a three-phase connection. Despite its lightweight construction of only around 220 kg, the machine stands independently and is about the size of a tall household appliance. Key feature: ultra-fast processing of cable diameters between 20 mm and 120 mm. Technical data: Width: 68 cm | Depth: 59 cm | Height: 130 cm | Weight: 220 kg | Speed: 40 m/min | Voltage: 380 V | Power: 3 kW | Cross-section: 20–120 mm Djdoy H Ikwjpfx Akvskr

Year of construction: 2001, condition: excellent (used), functionality: fully functional, Compost Turner BACKHUS 10.10. Diesel engine: 264 hp Weight: 14.9 t Dkjdpfx Ajy Equ Hjkver Current videos can be provided upon request.

Condition: good (used), Year of construction: 1990, functionality: fully functional, - Year of manufacture: 1990 - 3 x 90 kW drive Dedpfx Asy Dtb Aekvekr - Including press feed and discharge conveyor (including feed bunker); manufactured by ATM; year of manufacture: 2012 The complete line is in very good condition and immediately ready for operation.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total width: 6,265 mm, total length: 7,420 mm, total height: 3,900 mm, Baling Press Henschel PS 3-30 / 30 B Dkodoyx Axgepfx Akvsr Year of manufacture: 1999 (refurbished and modernized by ATM in 2016) Immediately operational (all necessary repairs and servicing have been carried out by us) Main dimensions of the entire machine: Length: 7420 mm Width: 6265 mm Height: 3900 mm Total weight: approx. 38 t Feed opening: 1210/2150 x 1900/2340 mm Technical data: Motor: 1 x 90 kW Pressing force: - 1st compression: 1000 kN - 2nd compression: 1570 kN - 3rd compression: 2000 kN - Bale door closing force: 200 kN Bale size: 300 x 300 mm

Condition: ready for operation (used), * Brand: Titech Tomra * Model: optical separator Dkodpfoywnf Nex Akvsr * Type: Autosort NIR1 S2000 X-L