Werner Michalski

Condition: used, Rotating chuck collet holder for pressure collets Collet chuck, collet holder Chuck flange: short taper DIN 55027 size 5 (with 4 tightening bolts M10), taper bore approx. Ø 82 mm Pressure collet type: F 48 / 173E DIN 6343 Large taper diameter: Ø 60 mm Small taper diameter: Ø 48 mm Collet taper: 30° Collet length: 94 mm - 2 pressure collets: 1x Ø 20 mm round collet, 1x 30 mm hexagonal collet Weight: 11.5 kg Good condition Redpfxezqgl Es Amyscd

Year of construction: 1999, condition: used, manufacture IEMCA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Rsdpfjzqgiwsx Amyjcd Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 1999, condition: used, manufacture IEMCA weight 1.400 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Rcjdpezqgiqefx Amysd Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 2006, condition: used, manufacture IEMCA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Rcsdpfezqgiksx Amyjd Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Year of construction: 1997, condition: used, manufacture IEMCA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery Rodpfszqgh Tox Amyocd only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Offering a bezel for a Boehringer DUS 560 ti. The machine was involved in an accident, but the bezel has seen very little use. The bezel is undamaged. Rjdpfezp Hzkox Amyocd

Condition: used, TECHNICAL DETAILS Rcjdpfx Amozpznroyjd - Bar diameter : 3-26 [mm] - Bar length : 3200 [mm] POWER SUPPLY - Supply voltage : 380 [V]

Condition: used, weight / kg Rjdpszmy Swsfx Amyscd taper MK /

Condition: used, Forkardt 2-Jaw Chuck 1629034, Double-Jaw Chuck, Ø 160mm Index G200 Adapter, Ø140mm ZWS140-K5 Index G200 Used, as shown in the pictures, in excellent condition From warehouse stock (may have storage marks) Please refer to the pictures for further technical information. Scope of delivery as shown in the pictures. With invoice. Rcsdpozk Iy Rofx Amysd The invoice will be enclosed with the shipment.

Condition: good (used), functionality: fully functional, 3 inserts for Multifix, size C, Redpszkypqjfx Amyscd

Condition: used, TECHNICAL DETAILS Rcsdpfezkmdujx Amyed - Bar diameter : 8 - 80 [mm] - Bar length : 3300 [mm] POWER SUPPLY - Supply voltage : 230 / 400 [V]

Condition: repair required (used), Year of construction: 2022, functionality: limited functionality, Used Spinner Robobox, used to automate the loading and unloading of Spinner lathes with plastic components. Rsdpfx Ajzi Elhjmyecd Fanuc M10iD 6-axis robot, 1420 mm reach, 12 kg gripper unit. Barely used. Dual gripper, 5 drawers 800 x 600 mm (3 x 150 mm, 2 x 200 mm height). Safety scanner. Note: Hard drive needs to be replaced.

Condition: used, 4-Jaw indexing chuck AROWA TYPE Ø 380 NO. 11 Diameter: 380 mm Inner diameter: 135 mm Chuck mount: Short taper, size 8, DIN 55027 with 4 mounting bolts M16 Taper mount: Ø 139 mm - Indexing chuck with centrally adjustable jaws Redpfxszin Apo Amyscd - 1 set of jaws with inward steps Weight: 84 kg Good condition

Condition: good (used), Top slide, top slide, dovetail guide, tool slide, cross table, support slide, support beam, tool clamp, tool holder, tool mount, centering clamp Rcjdpfszhl Dbsx Amyod -Tool clamp: Centering clamp, tool holder -Hole: Ø 58 mm -Dimensions: see photos -Dimensions: Ø 125 x 125 mm -Weight: 5.7 kg

Condition: good (used), Tool trolley with inserts Rcodpfx Aezhi Tmemyod with turning holder for NC lathe, Shaft: 50 mm

Condition: like new (used), 3 face plates, cast iron. Each with an outer diameter of 500 mm. Rjdpfxezg Tf Do Amyecd 1 unit with through-hole = 128 mm 1 unit with through-hole = 90 mm 1 unit with through-hole = 80 mm.

Condition: like new (used), 3 unused clamping elements Rsdpfx Amjzfn Hmjyocd Dimensions, W x D approx.: 100 x 150 mm Total height: 91.5 mm Jaw width: 30 mm Lowest support height on jaws: 68.5 mm Medium support height: 80 mm Clamping height per jaw approx.: 11.5 mm

Condition: used, Collets in special size – suitable for Weiler 260 and Leinen 140 – package price: EUR 250 net Rodpfxjzd Uq Ne Amyecd

Condition: ready for operation (used), For sale: chucks from well-known manufacturers. VDI50 DIN1809 shank (fin type). The price listed is per unit. All details are shown in the pictures. Shipping costs will be calculated separately, depending on the number of chucks ordered. Please feel free to contact us. Rcsdozd Rpzepfx Amyjd

Condition: good (used), Year of construction: 1986, Metal cutting Tooling VDF BOEHRINGER - DUE 560 MACH-ID 2962 Make: VDF BOEHRINGER Type: DUE 560 Year: 1986 Max. Diameter:150 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Rodszdixkepfx Amyocd

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2968 Make: TOS Type: SN / SIU Rsdpfozdiv Ajx Amyocd Max. Diameter 250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2969 Redpfx Aozdiuxomyocd Make: TOS Type: SN / SIU Year: 90 Max. Diameter 150 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Steady rest fixed universal Ø 120 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Rcjdpjzditgefx Amysd

Condition: good (used), Steady rest universal swing Ø 100 Rsdpfezdirdex Amyocd Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Steady rest fixed universal Ø 125 mm Rsdpfx Amjzdiqxoyocd Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!