Kieblesz Maschine

Condition: used, Year of construction: 1999, functionality: fully functional, spindle diameter: 40 mm, total width: 1,800 mm, total height: 1,890 mm, total length: 4,200 mm, overall weight: 3,200 kg, spindle speed (max.): 6,000 rpm, type of input current: three-phase, input voltage: 400 V, number of spindles: 6, Weinig Profimat 23E four-sided planer Working width: 230mm Working height: 120mm Number of spindles: 6 Bottom: 7.5kW Right: 7.5kW Left Top: 7.5kW Bottom: 11kW Universal: 5.5kW Spindle diameter: 40mm Working speed: 24m/min Pneumatic pressure pads for feed rollers Electric adjustment of the pressure bar Length of the infeed table: 1970mm Itedpjzvgbwefx Abnek Table lubrication system Year of manufacture: 1999 Machine dimensions: 420x180x189cmH Machine weight: 3200kg

Condition: as good as new (ex-display), Year of construction: 2025, warranty duration: 12 months, MP410EH30S Processing specifications: 4-sided Moulding Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 2mm 2-sided Moulding Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 5mm 1-sided Moulding or Thicknessing Capacity Width 90-400mm Height 25-230mm Minimum material length 1m Maximum cutting depth 5mm Cutterhead Specifications Upper Horizontal Cutter Diameter 122mm Width Itsdpfx Abozvcapenek 510mm Power 11kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Lower Horizontal Cutter Diameter 122mm Width 510mm Power 11kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Vertical Cutters Diameter 122mm Maximum height 230mm Maximum diameter 142mm Power 5kW Speed 6000 rpm /min 50Hz Maximum cutting depth 5mm Maximum moulding depth 20mm Spindle diameter 40mm Feed Variable feed speed 5-18 m/min Smooth rollers 127mm Grooved rollers 28mm Soft roller 28mm Power / voltage Voltage / frequency 3 x 400 V, 50 Hz Total power 28.6kW Upper cutter 7.5kW Lower cutter 7.5kW Side cutters 5.5kW Upper feed 1.5kW Lower grooved feed 0.55kW Lower smooth feed 0.55kW Sawdust collector Port diameter 1x200mm 1x150mm Recommended fan power 10000m3/h

Condition: excellent (used), functionality: fully functional, Weinig Hydromat 23 profiling line Kallfass KFP-4000-4 destacker Package length 2500mm Itsdpfx Abszvaw Ssnjk Feeding to the profiling machine conveyor Receiver for spacers Weinig Hydromat 23 four-sided planer Number of spindles: 9 Hydraulic feed drive: 60m/min Material conveyor to Weinig EM12 planer Weinig UNISTACK 811 stacking machine Package length: 500 mm to 3100 mm Package height: 1200mm Package width: 1200mm

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0803078, spindle diameter: 40 mm, type of input current: three-phase, number of spindles: 4, For sale: Leadermac Linnerman 423c with four 40mm spindles, featuring a feed system controlled by a potentiometer. The maximum feed speed is 30 meters per minute. The control panel is mounted separately on a trolley. The equipment is disconnected from the power supply. Spindles: 4 shafts, diameter 40 mm. Feeding system: Variable feed speed controlled via a potentiometer. Iodozvalpopfx Abnjtk Feed speed: Adjustable up to 30 m/min. Control panel: Separate control unit mounted on a mobile trolley.

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on the thicknesser 250mm - max. thickness of workpiece on the side heads (3-sided) 110mm – from above: - ejectors - toothed infeed shaft - pressure pad - planing shaft - pressure pad - smooth outfeed shaft - pressure pad at the output – from below: - guide strip - adjustable rollers in the lower bed, 2 pcs – from the rear: Ijdpfszu Sgpex Abnotk - side spindles + pressure pad, 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed settings - electric bed lifting - dust extraction port 2x110mm - overall dimensions (L/W/H) 1650x1500x1210mm - weight 1370kg ADVANTAGES – Polish production – shaft for 4 knives – used planer, very good condition Net price: 23,900 PLN Net price: 5,690 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8034 TECHNICAL DATA - max. width of workpiece – upper roller: 510mm - max. width of workpiece – lower roller: 450mm - max. thickness of workpiece, 2-sided: 200mm – from the top: - ejectors - 1 toothed metal feed roller - 2 metal feed rollers, sequential - 1 toothed metal feed roller - pressure roller - 510mm planing roller, 4 knives, with the possibility of fitting profile knives, approx. 7.5kW - pressure roller - smooth metal feed roller - upper pressure roller at the outlet with 2 rubber feed rollers – from the bottom: - adjustable infeed table with guide - smooth, metal, sliding roller - 450mm planing roller, 4 knives, 7.5kW - 2 smooth metal feed rollers – from the back: - 2 side spindles 1) vertical, right, 200mm, 6.6kW 2) vertical, left, 200mm, 6.6kW - spindle diameter: 40mm - 2 heads included - spindles adjustable up/down, left/right - axes arranged alternately - electric height adjustment - 2 types of feed speed + stepless 5-13, 13-36m/min - diameter of dust extraction nozzle: 2x125mm, 145mm, 130mm - dimensions (L/W/H): 3200x1740x1650mm + control unit - weight: 2100kg ADVANTAGES – Made in Portugal – Electric table lifting – Ideal for processing wet and dry wood – 2 planing rollers + 2 spindles – Very good condition – Used planer Net price: 48900 PLN Net price: 11643 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations) Itjdezu R Thopfx Abnsk

Condition: excellent (used), CATALOGUE NUMBER 7556 Technical specifications: - min / max width of the workpiece 20 / 240mm - min / max height of the workpiece 8 / 160mm - number of spindles 4 1) horizontal lower 240mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) horizontal upper 240mm 7.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 toothed feed rollers, including 2 double rollers - 2 smooth rubber withdrawal rollers – from below: - side pressure before and after the roller in the lower bed - toothed feed roller, rotating, in the lower bed before the first spindle - 2 pneumatic side presses - smooth metal withdrawal roller - all rollers are pneumatically pressed - length of the feed bed 2180mm - bed adjustable up/down - central lubrication - electric adjustment of the planing thickness - lifting motor 0.75kW - stepless feed speed adjustment on a frequency inverter 6-30m/min Itedpfx Abjzu R R Hjnek - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet + - diameter of the dust extraction nozzle 4x150mm - dimensions L/W/H 3750x1750x1800mm - weight 3300kg ADVANTAGES – with 4 heads – ideal for both wet and dry wood – used machine, in perfect condition Net price: 66900 PLN Net price: 15920 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7219 Itjdpfxszu R Rmj Abnok TECHNICAL DATA - max. width of the workpiece: 200mm - max. height of the workpiece: 150mm Number of spindles: 4 1) horizontal, lower: 200mm, 5.5kW 2) vertical, right: 150mm, 4kW 3) vertical, left: 150mm, 4kW 4) horizontal, upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm Top: - 6 feed rollers, toothed, including 2 double rollers - 1 feed-out roller, rubber, double Bottom: - feed roller, toothed, helical, located in the lower table - 3 side pressure rollers - feed-out roller, metal, smooth - all rollers are pneumatically pressed - length of the feed table: 2130mm - table adjustable up/down - central lubrication - electrical adjustment of cutting depth - lifting motor: 1.1kW - stepless feed speed adjustment - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle: 4x130mm - dimensions (L/W/H): 3650x1750x1800mm - weight: approx. 3000kg ADVANTAGES – 4 heads – ideal for both wet and dry wood – DTR documentation available – used machine, very good condition Net price: 52900 PLN Net price: 12590 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 6393 TECHNICAL DATA - max. width of workpiece: 200mm - max. height of workpiece: 150mm - number of spindles: 4: 1) horizontal lower: 200mm, 5.5kW 2) vertical right: 150mm, 4kW 3) vertical left: 150mm, 4kW 4) horizontal upper: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm From above: - 6 infeed rollers, toothed, including 2 double rollers Iodpfx Aezu R N Nebnjtk - 1 outfeed roller, toothed, rubber From below: - 1 infeed roller, toothed, pulling, swiveling in the lower table - 3 side pressure rollers - 1 outfeed roller, pulling, metal, smooth - all rollers are pneumatically pressed - length of infeed table: 2130mm - table adjustable up/down - central lubrication - electric setting of planing thickness - lifting motor: 1.1kW - stepless feed speed adjustment on inverter - feed motor: 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of dust extraction nozzle: 4x130mm - dimensions (L/W/H): 3550x1750x1800mm - weight: approx. 3000kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – DTR documentation – used machine, very good condition Net price: 49900 PLN Net price: 11880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (prices may change in case of significant exchange rate fluctuations)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Factory new – never installed! Weinig Hydromat 4300, high speed planer and moulder Feed speed 30-300 m/min Spindle 1 (Bottom) – Radial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 2 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 3 (Right): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 4 (Left): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 5 (Top): – Radial and axial CNC-controlled adjustment Itodpfozu Awrex Abnek – Hydro bearing with automatic locking – Straight jointer + profile jointer fully automatic Spindle 6 (Bottom): – Table tops with wood inserts, maximum cutting height of 65 mm with a flange of 100 mm – Rotaplan pressure plate above the bottom shaft – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic – Hydro bearing with automatic locking General: – Horizontal CNC-controlled pressure rollers – CNC-controlled positioning input – Marathon Powercoating Plus – Automatic waxilit pump – Weinig WMC with touchscreen – Kickback protection for sawing operations – Machine with spindle and feed brakes – Safety and sound insulation housing

Condition: used, Year of construction: 2019, - 6 working spindles - max. working width 250 mm - feed rate 6 - 24 m/min used planing and profiling machine Manufacturer: HOMAG Type: Optimat LPP306 Year of construction: 2019 OPTIMAT LPP306 Planing and profiling machine with 6 working spindles. Workpiece width after processing: - min. 10 mm - max. 250 mm Workpiece height after processing: - min. 10 mm - max. 160 mm Control system: - PowerControl with powerTouch LPP300 Infeed table 2,500 mm Feed rate min. 6 m/min max. 24 m/min FIRST LOWER SPINDLE: - Spindle motor power 7.5 kW - Siemens IE3 energy-saving motor Power speed range: - 7.5 kW - 6,000 rpm Spindle diameter 40 mm Spindle length 281 mm FIRST RIGHT SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 176 mm FIRST LEFT SPINDLE: Spindle motor power 7.5 kW, adjustable Itodpfjzuzf Ujx Abnjk - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length: 176 mm Total length: 176 mm FIRST UPPER SPINDLE: - Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm SECOND UPPER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm SECOND LOWER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1998, Four-sided planing machine Manufacturer: Weinig Type: P 23 E Year of manufacture: 1998 Technical data - Working width: 230 mm - Working height: 8-120 mm - Number of spindles: 5 (top, right, left, bottom, top) - Spindle speed: 6000 rpm - Feed rate: 5-24 m/min - Total connected power: approx. 25 kW - Infeed table: approx. 2000 mm - Weight: approx. 2500 kg Itedpfx Abozuzfujnek Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 Isdpfxezuzfhs Abnotk - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1999, Used 4-sided planing machine Manufacturer: WEINIG Type: Unimat 23 E Year of manufacture: 1999 with infeed unit EM11 Year of manufacture: 1999 Technical data: 5 spindles (bottom, right, left, top, bottom) Total connected load min. / max. 42 kW - 126 kW Air flow rate 30 - 32 m³ / MIN Air flow rate per spindle 28 - 32 m³ / MIN Total air flow rate 8400 - 9600 m³ / H Nominal pressure 8 bar Operating pressure 6 bar Iodpfx Abozuzdqonotk Connection diameter DN 8 Machine weight approx. 3200 kg Static load (with support plates 80 x 100 mm) max. 120 N / CM² Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2022, This 5s LEADERMAC Compact LMC-530C was manufactured in 2022. It features a working width of 15 – 300 mm and a working thickness of 10 – 150 mm, making it suitable for various woodworking applications. With multiple spindles and a Schneider 5.7” EASYSET touchscreen control, this machine offers advanced capabilities. Consider the opportunity to buy this LEADERMAC Compact LMC-530C wood planer. Contact us for further details. • Ref.: e/haaaa/dc • Working width: 15–300 mm • Working thickness: 10–150 mm • Minimum workpiece length: 800 mm • Minimum consecutive length: 300 mm • Infeed table: 2500 mm • Pneumatic left side pressure roller • Two-piece pressure shoe • Schneider 5.7" EASYSET touchscreen control • NC control axis 3 (left radial) • NC control axis 4 (top radial) • NC control for pressure beam height adjustment Itsdpfx Abozuhfhenek • Feed motor: 7.5 HP, feed speed 6–24 m/min • 1st spindle: 15 HP, Ø50 mm, 6,000 rpm • 2nd spindle: 10 HP, Ø50 mm, 6,000 rpm • 3rd spindle: 10 HP, Ø50 mm, 6,000 rpm • 4th spindle: 20 HP, Ø50 mm, 6,000 rpm • 5th spindle: 20 HP, Ø50 mm, 6,000 rpm Additional equipment • Additional table for multi-rip saw • Anti-kickback device for multi-rip saw

Condition: ready for operation (used), Year of construction: 2016, working width: 200 mm, total width: 1,635 mm, total height: 1,730 mm, overall weight: 3,750 kg, spindle speed (max.): 6,000 rpm, controller manufacturer: SIEMENS, controller model: Smart Line, spindle motor power: 5,500 W, product length (max.): 3,850 mm, This 6-axis REIGNMAC 520 Moulding Master was manufactured in 2016. It features a working width of 20–200 mm and a working thickness of 8–120 mm, with a feed speed of 6–24 m/min. The machine is equipped with six spindles, with a spindle speed of 6000 rpm and a maximum tool diameter of Ø145 mm. If you are looking to get high-quality woodworking capabilities, consider the REIGNMAC 520 Moulding Master machine we have for sale. Contact us for further details. • Working width: 20–200 mm • Working thickness: 8–120 mm • Feed speed: 6–24 m/min • Working table length: 1700 mm • Pressure beam vertical adjustment: 10 mm • Infeed table adjustment: 10 mm • Spindle configuration: • Number of spindles: 6 • Spindle diameter: 40 mm • Maximum tool diameter: • First bottom spindle: 108–145 mm • Right/left spindles: 108 mm • Top spindle: 140 mm • Bottom finishing spindle: 96 mm • Motor power: • Feed motor: 5.5 kW (7.5 HP) • Right spindle motor: 5.5 kW (7.5 HP) • Left spindle motor: 5.5 kW (7.5 HP) • Top spindle motor: 7.5 kW (10 HP) • Bottom spindle motor: 5.5 kW (7.5 HP) • Feed beam lifting motor: 1.1 kW • Total installed power: 28.6 kW Additional equipment Isdpfozuhbpox Abnetk • Safety cabin included

Condition: excellent (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. control Memory-Funktion Weinig Powermat 500 with grooved table ----- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool circle: 125-180 mm Tool circle for rebate cutter: 130-160 mm Travel Axial: 17 mm Folding attachment MarathonCoatin for table insert in front of 1st lower tool holder 2nd Spindle - right ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. groove depth: 35 mm Axially travel: 80 mm Radial travel: Min. tool diameter at stop level: 93 mm Max. tool diameter behind stop level: 200 mm 3rd Spindle - left ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads: max. 163 mm Max. Groove depth: 35 mm Axially travel: 55 mm Pressure shoe in front of left spindle, including 2 lateral pressure rollers, spring-loaded Spindle radially CNC-controlled 4th Spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 200 mm Maximum tool swing diameter for straight cutter heads: 180 mm Maximum groove depth: 35 mm Axially travel: 40 mm Spindle radially CNC-controlled Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Iodpfx Abozughzjnjtk 5. Spindle - Lower ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 93 - 225 mm Max. throat depth: 15 mm Axially travel: 35 mm Radial travel: Min. tool diameter to table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Feed roller adjustment travel relative to the left tool holder, axial 35 mm Reduced roller spacing relative to the right tool Machine electrical system ----- Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz. Machine stand, tables, and stops ----- Infeed table: 2500 mm long (including jointing guide) Slotted guide for short or difficult-to-guide workpieces, coated...

Condition: used, Year of construction: 2000, Used Weinig U23E with 6 spindles: Isdpfozuartsx Abnotk 1. Lower spindle, 5.5 kW motor 2. Right spindle, 11.0 kW motor 3. Left spindle 4. Upper spindle, 7.5 kW motor 5. Upper spindle, 7.5 kW motor 6. Lower spindle, 7.5 kW motor Feed speed 5-24 m/min, motor 2.2 kW.

Condition: excellent (used), functionality: fully functional, Weinig Powermat 1000 four-sided planer Working width: 230 mm Working height: 160 mm Number of spindles: 8 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW (power lock) Left: 5.5 kW Right: 5.5 kW (power lock) Top: 11 kW (power lock) Bottom: 15 kW Top: 7.5 kW (power lock) Itjdpfozt I Sfjx Abnjk Bottom: 7.5 kW All spindles: 8000 rpm Feed speed adjustable via frequency inverter up to 30 m/min Electromotive positioning of working height and width Weinig power com system Pneumatic material clamping 2 smooth rollers in the working table Working table length: 1970 mm Drive on cardan shafts

Condition: not inspected (used), functionality: unexamined, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, Working width: 20 – 230 mm Working height: 8 – 160 mm 7-spindle configuration Feed rate infinitely adjustable: 6 – 36 m/min Spindle motors with 7.5 kW, 11 kW and 18.5 kW power Mechanical brakes on the motors Electrical adjustment options for spindles and feed rate Hardened table insert in front of the first lower spindle Pressure pads and guides for precise workpiece guidance High-quality ball bearings and robust industrial design Spindle arrangement: Lower horizontal spindle 7.5 kW Right vertical spindle 7.5 kW Left vertical spindle 11 kW Right vertical spindle 7.5 kW Upper horizontal spindle 18.5 kW Lower horizontal spindle 7.5 kW Universal spindle 7.5 kW Itedpozt Hf Dsfx Abnsk

Condition: excellent (used), Catalog number 6765 TECHNICAL DATA - max width of workpiece 230mm - max height of workpiece 160mm number of spindles 4: 1) horizontal lower 230mm, 5.5kW 2) vertical right 160mm, 5.5kW 3) vertical left 160mm – electrically adjustable left/right from the control panel, 5.5kW 4) horizontal upper 230mm – electrically adjustable up/down from the control panel, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm from above: - infeed rollers, toothed, 6 pcs, including 2 double rollers - outfeed rollers, rubber, 2 pcs from below: - infeed roller, toothed, metal, twisted in the lower bed + - outfeed roller, metal, smooth - rollers pneumatically adjustable - length of infeed bed (with pneumatic feeder) 3390mm - possibility of operation without engaging the pneumatic feeder, - bed adjustable up/down - central lubrication - electric adjustment of planing thickness - smooth adjustment of feed speed Isdeztzmcopfx Abnjtk - feed on Cardan shafts - feed motor 4kW - enclosed in a cabinet - diameters of dust extraction nozzles 4x120mm - dimensions L/W/H 7000x1950x1700mm, - weight approximately 3000kg - for wet and dry wood - pneumatic feeder on the infeed table, - planer used, very good condition Net price: 65900 PLN Net price: 15690 EUR Net price calculated based on the exchange rate of 4.2 PLN/EUR (price may change in case of larger exchange rate fluctuations)

Condition: excellent (used), Catalog number 8033 TECHNICAL DATA max. width of the workpiece – upper shaft 510mm max. width of the workpiece – lower shaft 450mm max. thickness of the workpiece, processed on both sides 200mm – from above: feed roller ratchets 1 metal, toothed feed shaft 2 metal, sequential feed shafts 1 metal, toothed feed shaft pressure roller planing shaft 510mm, 4 knives, with the possibility of installing profile knives approx. 7.5kW smooth, metal feed shaft upper pressure roller at the outlet with 2 feed rollers – from below: adjustable infeed table with guide planing shaft 300mm, 3 knives 3kW slip feed shaft, metal planing shaft 450mm, 4 knives 5.5kW 2 smooth, metal feed shafts – from the back: 2 side spindles 1) vertical, right 150mm 4kW 2) vertical, left 150mm 4kW spindle diameter 40mm spindles adjustable up/down, right/left spindles lockable axes arranged alternately electric height adjustment 2 types of feed speed + stepless 5-13, 13-36m/min dust extraction nozzle diameter 2x120mm, 150mm dimensions length/width/height 3200x1500x1600mm + control panel weight 1980kg – manufactured in Portugal – electric table lifting – ideal for processing wet and dry wood – 3 planing shafts + 2 spindles – very good condition – used planer Iedpfx Abeztziwsnetk Net price: 38900 PLN Net price: 9260 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 7713 TECHNICAL DATA - max width of workpiece: 240mm - max height of workpiece: 130mm - 6 spindles: 1) horizontal lower 240mm, 7.5kW 2) vertical right 130mm, 5.5kW 3) vertical left 130mm, 5.5kW 4) horizontal upper 240mm, 7.5kW 5) horizontal upper 240mm, 5.5kW Spindles 4 and 5 are adjustable up/down electrically 6) horizontal lower 240mm, 5.5kW - all spindles are adjustable up/down, left/right - spindle diameter 40mm *from above: - 8 feeding rollers, toothed metal rollers, including 3 double rollers - 4 discharge rollers, smooth, rubber rollers, including 2 double rollers *from below: Ijdpfx Absztzhgsnetk - 3 smooth feeding rollers - 3 side pressure rollers - stepless feed speed adjustment via a frequency inverter - rollers are pneumatically pressed - feed motor 7.5kW - feed on Cardan shafts - electric adjustment of cutting depth - body lifting motor 0.75kW - length of the infeed table: 2480mm - pneumatic opening/closing of the cabinet - pneumatic blowing of the table - central lubrication of the table - diameters of the dust extraction nozzle: 3x120mm, 3x150mm - dimensions (L/W/H): 5300x1700x1800mm - weight: 5000kg ADVANTAGES – Made in Italy – With 6 heads – For both wet and dry wood – Pneumatic opening of the cabinet – Pneumatic blowing of the table – Spindles 4 and 5 are adjustable electrically – Used planer, very good condition Net price: 99900 PLN Net price: 23785 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), Catalog number 6338 TECHNICAL DATA - Max. width of workpiece: 230mm - Max. height of workpiece: 160mm 7 spindles: 1) Horizontal, lower: 230mm, 5.5kW 2) Vertical, right: 160mm, 5.5kW 3) Vertical, left: 160mm, 5.5kW 4) Horizontal, upper: 230mm, 7.5kW 5) Horizontal, upper: 230mm, 7.5kW 6) Horizontal, lower: 230mm, 7.5kW 7) Universal: 360°, 230mm, 7.5kW - All spindles are adjustable up/down, left/right - Spindle diameter: 40mm - All spindles are equipped with a brake - Spindle speed: 6000 rpm Top: - 6 toothed, metal feed rollers, including 2 double rollers - 4 toothed, rubber feed rollers, including 1 double roller - 3 pressure rollers at the outfeed Bottom: - Side pressure roller at the infeed - Toothed, feed roller, swiveling, in the lower table - 3 smooth, metal feed rollers - Rollers are pneumatically adjustable - Length of infeed table: 1190mm - Central lubrication of the table - Electric adjustment of planing thickness - Body lifting motor: 0.56kW - Smooth adjustment of feed speed on a frequency inverter: 6-24m/min - Feed motor: 3.7kW - Feed via Cardan shafts - Enclosed in a cabinet - Diameter of dust extraction nozzle: 7x125mm - Dimensions (L/W/H): 5100x2070x1900mm - Weight: approximately 5000kg ADVANTAGES – Equipped with 7 heads – Universal spindle – Ideal for both wet and dry wood Isdpfx Ajztzgpsbnstk – Spindles equipped with brakes - DTR documentation – Used planer, very good condition Net price: 115900 PLN Net price: 27595 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Catalog number: 6368 TECHNICAL DATA - max. width of the workpiece: 230mm - max. height of the workpiece: 130mm 7 spindles: 1) horizontal, lower: 230mm, 5.5kW 2) vertical, right: 130mm, 5.5kW 3) vertical, left: 130mm, 5.5kW Ijdpfxjztzgis Abnjtk 4) horizontal, upper: 230mm, 7.5kW 5) horizontal, upper: 230mm, 11kW 6) horizontal, lower: 230mm, 18.5kW 7) universal: 230mm, adjustable at an angle of 360 degrees, 5.5kW - all spindles adjustable up/down, left/right - all spindles equipped with an electric brake - spindle diameter: 40mm - spindles 4 and 5 adjustable electrically up/down - top: 8 feed rollers, metal, twisting, including 2 double rollers - top: 4 feed rollers, rubber - top: 2 pressure rollers - bottom: pawls - bottom, side: 3 pressure rollers - bottom: 2 metal feed rollers, smooth - bottom: 2 double feed rollers, rubber - rollers are pneumatically pressed - feed on Cardan shafts - stepless feed speed adjustment: 5-36 m/min - feed motor: 4kW - electric adjustment of planing thickness: 0.75kW - length of the infeed table: 1980mm - enclosed in a cabinet - central lubrication of the table - dust extraction port diameters: 5x120mm, 2x150mm - dimensions (L/W/H): 5500x1840x1900mm - weight: approx. 5000kg ADVANTAGES - Made in Italy - With 7 heads - For wet and dry wood - Last spindle is universal - Unpainted - Used planer, very good condition Net price: 116,900 PLN Net price: 27,830 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary depending on exchange rate fluctuations)