Den Hertog Machines bv

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 10345, control type: CNC control, actuation type: hydraulic, controller manufacturer: RAS, controller model: System 2005, working width: 4,040 mm, cutting angle (min.): 1 °, cutting angle (max.): 1 °, stroke rate (min.): 28 1/min, stroke rate (max.): 46 1/min, sheet thickness (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge: 1,250 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 9,500 kg, number of support arms: 6, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, RAS POWERcut 86.43 CNC Hydraulic Plate Shear Manufacturer: RAS Model: POWERcut 86.43 Year of manufacture: 2018 For sale is our RAS POWERcut 86.43 CNC hydraulic plate shear. The machine is currently still in our production facility and will be used sporadically until the sale. Therefore, it can be inspected and demonstrated at any time while powered on. The shear has been used exclusively in our facility and impresses with its high cutting quality and the extensive original equipment from RAS. Of particular note is the cutting angle of only 1.0°, which enables very low-distortion and clean cuts, even with thin sheets and stainless steel. Another advantage is the complete original RAS material handling system with automatic cut piece return, small parts sorting, and scrap separation. As a result, the finished cut pieces are automatically returned, and the workflow is significantly simplified. Technical data • Year of manufacture: 2018 • Cutting length: 4,040 mm • Max. sheet thickness steel: 5 mm • CNC control system 2005 with LCD graphic display, softkey and window technology • CNC back gauge 5–1,250 mm • Stroke rate: 28–46 strokes/min • Cutting angle: 1.0° • Transport weight: approx. 9,500 kg Equipment • CNC control system 2005 • CNC back gauge up to 1,250 mm • Cutting line illumination • Foot switch with multiple functions Bdodjzhnz Nopfx Adrod • 20 hydraulic individual hold-downs • Finger guard with deep grip pockets • Built-in knives for chrome steel (stainless steel) • Base machine raised by 100 mm • 2 table extensions of 1,500 mm each • 4 additional short table plates • 33 steel ball rollers • Tilting back gauge with precision scale • Powder-coated table plates • Oil filling Material handling • Original RAS cut piece return • Small parts sorting • Scrap separation • Large parts feed-through • Movable scrap cart (side or rear) Safety • Light curtain • Protective fence on the right and left • Safety device to protect the rear of the shear The machine is well-maintained, used sporadically, and fully functional. An inspection while powered on is possible at any time by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: used, functionality: fully functional, PRESSA PIEGATRICE A BARRA DI TORSIONE, 2500x40T,usata revisionata messa a normativa,OMAG PI 4020.FUNZIONAMENTO SOLO IN VELOCITA' LENTA, PER UN UTILIZZO A NORMATIVA SENZA FOTOCELLULE impianto elettrico nuovo, macchina revisionata e COLTELLO SUPERIORE E PRISMA INFERIORE A 5 CAVE, RETTIFICATI CON 2 POSIZIONATORI POSTERIORI REGOLABILI MANUALI . Bdjdpfx Aezhknlsdrod

Condition: good (used), RAS panel shear, 4m length, capable of cutting sheet metal up to 5mm thick, in good condition, with hold-down function. Bodpozgf Uqefx Adrjdd

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 108461, EHT Trumpf hydraulic sheet metal shear, type TrumaCut 460 working width 6050 mm max. sheet thickness 4 mm steel Cybelec CNC control, type DNC 60-GS pneumatic sheet support device Bdodpfx Adozf Ifiored motorized back gauge automatic shear gap adjustment automatic angle adjustment side gauge 6000 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, SHEARING MACHINE BL Bedpfezfptbox Adrodd 3000 X 3/4 X 200 HYDRAULIC MOTORIZED BACK GAUGE USED MACHINE, IN WORKING ORDER

Condition: new, functionality: fully functional, Sheet width: 2040 mm Sheet thickness for structural steel: 4 mm Sheet thickness for stainless steel: 2 mm Total power: 7.5 kW Back gauge: 750 mm Machine weight approx.: 2600 kg Dimensions: 2810 x 2230 x 1360 mm Bdjdezbbdfspfx Adred Standard equipment: - All-steel sheet metal welded construction with static and dynamic frame rigidity - Direct drive with braking motor - specially alloyed cutting blades - 750 mm motorized, digitally adjustable back gauge with ball screw spindles - manual blade gap adjustment system - mechanical sheet metal clamping system with plastic support - work table with insert plates - foot switch for single and repeat cut cycles - 1 x squaring arm with a length of 1000 mm and a metric scale - 2 x material support arms at the front, 800 mm - front gauge - finger guard - front and rear guards - rear light protection devices - CE declaration of conformity

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Sheet metal width: 2050 mm Sheet metal thickness: 4 mm Bdodpfezbarnex Adrjd Stroke: 41 mm/min Table height: 850 mm Machine weight (approx.): 2,900 kg Dimensions: 2700 x 2200 x 1400 mm

Condition: good (used), functionality: fully functional, Safan HT 255-4 TS hydraulic plate shear for sheet metal, in unique condition! Bdodpoy Uliaofx Adrjd Hardly any signs of wear are visible on the work table from the sheet metal that has been processed on it! Capacity: 4 mm over 2550 mm Easy operation, precise rear gauge digitally adjustable. Equipped with a safety guard on the rear and an emergency stop on the front. The machine has a support system for the cut material as well as a collection tray (not shown).

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle 0,5 - 2,5 ° Bsdpfx Adey S D Nmsrodd total power requirement 30 kW weight of the machine ca. 19 t Machine was overhauled in 2010 and was modernized with light barrier at table. Machine will be sold with automatic back stop with DRO. including flat belt conveyor

Condition: used, functionality: fully functional, Year of construction: 1991, LVD guillotine shear for sale in good condition. The machine can be inspected under power. It has only been used for thin sheet metal processing. Price on request. Bdsdpfx Asy Ry Ehedred

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Bdodjy Rf T Repfx Adrsd Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: used, sheet width 1050 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm distance between columns 1200 mm blade length 1150 mm no. of strokes 46 - 69 Hub/min cutting angle 1.30 ° Control konv. oil volume 100 ltr. total power requirement 5.68 kW weight 1100 kg From a maintenance workshop In good condition (!!) Bdodpjy Raimefx Adred Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge * Backlash-free ball screw for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF)

Condition: used, functionality: fully functional, Used guillotine shear from Donewell Bodpfx Adey Nycqjrsdd Model: 2500 3 Steel capacity: 2500 x 3 mm Electric backgauge Adjustable cutting angle

Condition: used, functionality: fully functional, Year of construction: 1969, machine/vehicle number: 506/10/2,5, control type: CNC control, degree of automation: manual, actuation type: hydraulic, working width: 1,030 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, control voltage: 220 V, Used Fasti guillotine shear, model 506/10/2.5, year of manufacture 1969 Bdodpfxoy Hhiaj Adred

Condition: used, Have we aroused your interest? Then please register on our homepage - we look forward to hearing from you! Your Maschinen Besmann Team We have an Amada Promecam GTH 420 for sale, which was manufactured in France. Due to its size, it also fits into a smaller workshop. Amada Promecam 420 GTH guillotine shears Manufacturer: Amada Type: Promecam 420 GTH Condition: used Cutting length: 2000 mm material thickness: 4mm in steel Backgauge: electric, 750 mm Motor power: 5,5 KW Weight: approx. 3300 kg Bsdpoy Efpnsfx Adrsdd

Condition: used, Year of construction: 1992, Max. cutting length: 1250 mm Max. sheet thickness: 4 mm steel Controlled rear stop Side stops and table extensions cutting length limitation Bdjdpsy Dcdtjfx Adrjd Cutting edge lighting Light barrier for safeguarding the rear area knife sharpened Weight approx. 2800 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: SO151003, sheet thickness (max.): 3 mm, warranty duration: 36 months, cutting length (max.): 1,500 mm, lateral stop: 1,000 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, Electric guillotine shear ShearOne E1500x3 CoastOne - Made in Finland Electric guillotine shear ShearOne 15 - Made in Finland Bsdsy A Nt Ejpfx Adredd 1500mm x 3mm TC15 touchscreen control - Sheet metal holding - Automatic cutting gap adjustment

Condition: good (used), Year of construction: 1986, Max. working width: 4000 mm for sheets with tensile strength of 40 kg up to: 3 mm Table width: 470 mm Backgauge adjustment: 1000 mm Fixed cutting angle: 1°30' Frame throat depth: 200 mm Hydraulic drive: 380 V, 7.5 kW Required space: 4650 x 1830 x 1420 mm (height) Bedpfxey A Eg Us Adrsdd Weight: 5.7 t

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used Safan guillotine shear with discharge unit Type VS 430 3 Bdodpsyzgdrjfx Adrjd Capacity: 4300 x 3 mm Electrically adjustable back gauge Manually adjustable cutting angle and blade gap Equipped with lift/discharge device at the rear

Condition: used, Year of construction: 1987, sheet width - max. 3035 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO total power requirement 8.5 kW weight of the machine ca. 4400 kg range L-W-H 3416 x 2250 x 1760 mm Equipment: - robust NC electro-hydraulic guillotine shears - NC electro-motorized backgauge * with ELGO control unit "TYPE 85" - Manual cutting gap adjustment - front support table incl. recessed grips Bdsdpfxoyyc A Uo Adred - 1x stable side stop, with scale and tilting cam - 3x stable front support arms - 1x freely movable foot switch - front finger guard - Rear metal slide - EMERGENCY OFF button at the front - Operating instructions (PDF)

Condition: new, sheet width 2550 mm 4 mm sheet thickness for stainless steel 2 mm rear stop 750 mm total power requirement 7,5 kW weight of the machine ca. 3050 kg Bdjdpfx Ajyyc Azodrsd dimensions 3300 x 2230 x 1360 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity Youtube video link: ?v=pCuKwtBIQto&ab_channel=BaestleinGmbH

Condition: used, Year of construction: 1995, sheet width 6500 mm Bdsdpfx Aoyyc Ausdrod plate thickness 3 mm back stop - adjustable 1000 mm dimensions 7300x2400x2300 mm Weight 20000 kg Equipment/accessories: - 1 x set of knives

Condition: used, Hydraulic metal shearing guillotine, cutting thickness 3.2 mm, cutting length 2500 mm, rear backgauge electrically adjustable, 380V power supply, year 2011. Bdodpfx Adeywyr Usrod

Condition: used, sheet width 2500 mm plate thickness 3,0 mm distance between columns 2550 mm Bedpeyv I H Djfx Adrsdd back stop - adjustable max. 510 mm weight of the machine ca. 1,8 t dimensions 3,3 x 1,4 x 1,8 m

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used 4-meter Safan guillotine shear Type: VS 430 3 Capacity: 4300 x 3 mm Electric back gauge Output stacking system with stacker and high support table Bodpfx Adeyu Ig Horjdd Year of manufacture: 1990