Orodel d.o.o.

Condition: used, Table size: 800 x 350 mm Grinding wheel: 380 x 50 mm Kdjdpfx Ahj Aa Dtiobeu Grinding wheel dressing device, paper filter system

Condition: used, Year of construction: 1986, grinding length 400 mm grinding width 210 mm workpiece height 300 mm grinding wheel width x diameter 250 x 15 x 51 mm turning speeds 1100-2800 U/min Kdodpfxj Aa A Hbs Ahbju forward and return motion adjustable 0-3 m/min 350 x 200 mm total power requirement 2,1 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2 x 1,5 x 1,8 m Surface grinding machine with: - Coolant system - Heidenhain digital readout

Condition: used, machine/vehicle number: 62220966, Max. grinding wheel diameter: approx. 250 mm, grinding area: 350x150 mm, with magnetic clamping plate, machine light, and coolant system. Kedpfx Ajz Nhr Njhbjdu

Condition: new, functionality: fully functional, overall weight: 1,530 kg, grinding spindle motor power: 22 W, travel distance X-axis: 630 mm, travel distance Y-axis: 320 mm, grinding spindle speed: 1,680 rpm, warranty duration: 12 months, Új TAATH 1224 típusú hidraulikus síkköszörűgép - raktárról, azonnali szállítással MOST AKCIÓBAN: 9.900,- EUR + ÁFA (Régi ár: 15.900,- Eur+Áfa) Asztal: 600 x 300 mm Az asztal max.mozgása: 630 x 320 mm Asztal mozgási sebessége (m/perc): 3-20 Kereszthajtás a kézikeréken (mm): 0,02/fokozot 4/fordulat Kereszthajtás sebessége (mm/perc): megszakításokkal 0-6, folyamatosan 600 Függőleges hajtás a kézikeréken (mm): 0,01/fokozat 1,25/fordulat Függőleges hajtás sebessége (mm/perc): 360 Korong méretei: Ø 300 x 30 x 76,2 mm Orsó fordulatszáma (60Hz): 1680 rpm Órsó motor: 2,2 kW Hidraulikus motor: 2,2 kW Nyomás: 4 mpa Olajtartály kapacitás: 100 l Kdodpfx Ahsz I Tg Usbeu Gép mérete: 1960×1480 ×1850 mm Gépsúly: 1530 kg X-tengely hajtása: hidraulikus Y – tengely hajtása: motor Z –tengely: motor

Condition: good (used), Surface grinding machine Manufacturer: Harig Stock number: 2965-4 Year of manufacture: Machine number: Type: Super 612 Grinding length: 300 mm Grinding width: 175 mm Table clamping surface: 300 x 150 mm Magnet: 250 x 120 mm Vertical adjustment: 250 mm Kdjdpfx Ahez Hzyyjbeu Table movement, longitudinal: 330 mm, manual Table movement, transverse: 175 mm, manual Spindle speed: 3,600 rpm Grinding wheels: 200 x 20 x 51 mm Connection: kW Accessories/Equipment: Condition: good Weight: t Dimensions: 870 x 900 x 1,900 mm

Condition: excellent (used), Condition: Very good condition with relatively low usage. The machine was used in a correctional facility and was rarely operated. Metallkraft precision surface grinding machine FSM 2550 Robust surface grinding machine with CNC-controlled vertical feed and electromagnetic clamping plate for precision surface grinding operations. Grinding table clamping area (L x W): 500 x 250 mm Distance spindle / table: max. 500 mm Workpiece weight: max. 190 kg Feed rate X-axis: 5 - 25 m/min Spindle speed: 2,900 min-1 Grinding wheel (D/dxB): Ø 180 / 31.75 x 13 mm Connection voltage: 400V / 50Hz Motor power spindle: 1.5 kW Motor power hydraulic pump: 0.75 kW Kdedpfoz Hly Rsx Ahbou Footprint: 2,250 x 1,400 mm Dimensions (L x W x H): 2340 x 1500 x 1800 mm Weight (net): approx. 1,385 kg

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1107, total height: 1,700 mm, total length: 1,000 mm, total width: 900 mm, overall weight: 350 kg, For sale is a compact surface grinding machine from the German manufacturer Degen. Model FSM300E. In very good used condition. The machine has seen little use. A very high-quality and precise machine, ideal for tool or prototype construction. Due to its small footprint, it is also suitable for small workshops. Grinding length: 300mm Cross travel: 170mm Max. distance between magnetic chuck and grinding wheel: 290mm Rapid traverse in height adjustment Kdjdpsz E S Hbofx Ahbju Magnetic chuck: 300x150mm Space requirement: length 1.0 m x width 0.9 m x height 1.7 m Machine weight: approx. 350kg Includes coolant system, electromagnet, wheel dressing device, and extraction system. The machine runs perfectly and grinds with precision. Can be tested while powered on. Location: 5023 Salzburg.

Condition: used, Year of construction: 1998, grinding length 600 mm grinding width 400 mm workpiece height 525 mm table surface area 960 x 400 mm dimensions of grinding wheel 350 mm 600 x 400 mm grinding spindle speed 3000 U/min table load capacity 1100 kp total power requirement 8,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,4 x 1,9 x 2,1 m Surface grinding machine - Magnetic chuck - Coolant system with filter Ksdpszzd Thjfx Ahbedu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Precision surface grinding machine Degen Type FSH 300 with digital display Technical data and features: Kedpfszu Sn Hjx Ahbsdu >> Manufacturer's serial no. 1379, year of manufacture 2008 >> Max. grinding length 300 mm >> Max. grinding width 160 mm >> Working height with new/worn grinding wheel 240/290 mm >> Electrically operated magnetic clamping table 300 x 150 mm x 80 mm >> Total power requirement 4.6 kVA >> Space requirement: length 1.0 m x width 0.9 m x height 1.7 m >> Weight approx. 450 kg About the machine: Offered is a precision surface grinding machine from the German manufacturer Willy Degen, type FSH 300. A German-made product with high precision, an absolute top-quality machine. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: ready for operation (used), functionality: fully functional, HAAS UHS / Manual Hand Lever Surface Grinder - Grinding length approx. 350mm - Grinding width approx. 180mm Kdedpfx Aezu Nphshbsu - Grinding height approx. 250mm - Grinding movement controlled manually via lever - Swiveling range (horizontal) 360 degrees - Tilting range (vertical) +15 to -20 degrees - General angular adjustment - Spindle speeds 2500 / 5600 RPM - Drive power 1.1 kW Dimensions: L x W x H 1.2 x 1 x 1.7 meters / Weight 750 kg Subject to errors and omissions.

Condition: good (used), Complete set consisting of: 1 unit of SAV grinding vise, jaw width 65 mm 1 unit of SAV grinding vise, jaw width 80 mm 1 unit of grinding vise, jaw width 60 mm 1 unit of sine vise, jaw width 70 mm Kdedpfozr U U Rjx Ahbou 1 unit of universal vise, jaw width 70 mm 9 units of grinding magnets 1 unit of grinding wheel dressing tool, manufacturer Jung 1 unit of sine grinding wheel dressing tool, manufacturer Jung in good condition

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Standard Accessories • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator • Rapid Wheel head Retraction • Teach-Input Positioning • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates Kdsdpfszmhknex Ahbju • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training • Instruction Manual

Condition: excellent (used), functionality: fully functional, Precision surface grinding machine Degen Type FSH O 300 with digital display RSF Technical data and features: >> Manufacturer's serial no. 1127/87, year of manufacture 1987 >> Max. grinding length 300 mm >> Max. grinding width 160 mm Kjdpfx Aszmf U Dehbsdu >> Working height with new/worn grinding wheel 240/290 mm >> Manual magnetic chuck 300 x 150 mm x 80 mm >> Rapid traverse in the feed direction >> Magnetic chuck >> Total power requirement 2.0 kW >> Space requirement: length 1.0 m x width 0.9 m x height 1.7 m >> Weight approx. 450 kg About the machine: Offered is a precision surface grinding machine from the German manufacturer Willy Degen, type FSH O 300. It has feed in 2 axes and manual table feed. A German-made product with high precision, an absolute top-quality machine. Take advantage of the opportunity to inspect and test this machine on-site while it is powered.

Condition: used, Year of construction: 1982, grinding length 600 mm grinding width 350 mm table surface area 900 x 300 mm dimensions of grinding wheel 400 x 50 x 127 mm 600 x 300 mm grinding spindle speed 3000 U/min weight of the machine ca. 2,5 t dimensions of the machine ca. 3,0 x 2,0 x 2,2 m Surface grinding machine - Magnetic grinding wheel - Coolant system Kdjdozip H Aopfx Ahbju

Condition: used, Year of construction: 2004, functionality: fully functional, center height: 125 mm, overall weight: 4,700 kg, We are offering this used Kellenberger KEL-VISION cylindrical grinding machine, manufactured in 2004, for sale. Type: KEL-VISION Weight (max.): 4700 kg Year of manufacture: 2004 Machine No.: 665100 Kjdpfxjy Urias Ahbodu Includes a Universal Robots UR5 robot. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1986, functionality: fully functional, Precision surface grinder Degen Type FSHQV300 with digital display Technical data and features: >> Year of manufacture 1986 >> Max. grinding length 300 mm >> Max. grinding width 160 mm >> Working height with new/worn grinding wheel 240/290 mm >> Manual magnetic chuck 300 x 150 mm x 80 mm Kdjdey S Ailepfx Ahbju >> Rapid traverse in the feed direction >> Magnetic chuck >> Total power requirement 2.0 kW >> Space requirement length 1.0 m x width 0.9 m x height 1.7 m >> Weight approx. 450 kg About the machine: A precision surface grinder from the German manufacturer Willy Degen, type FSHQV300, is offered for sale. It can be used for surface grinding or plunge grinding with automatic feed. The feed dimension is entered via the digital display. This is a German-made product with high precision and represents a top-quality machine. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: ready for operation (used), Surface grinder, travel (mm): X485, Y170, Z350, hydraulic, grinding wheel diameter 177.8 mm, 1.5 kW, 2800 rpm, with digital readout. Kdsdpfxey N S Sqe Ahbju

Condition: used, Year of construction: 1987, grinding length 1250 mm grinding width 400 mm workpiece height 550 mm table surface area 1750 x 500 mm dimensions of grinding wheel 400 x 50 x 127 mm 1250 x 600 mm grinding spindle speed 3000 U/min table load capacity 1100 kp total power requirement 13,8 kW weight of the machine ca. 6,0 t Ksdpfx Ahsy Ezz Tjbedu dimensions of the machine ca. 5,0 x 3,4 x 2,4 m Surface grinding machine - Magnetic grinding wheel - Coolant system - Documentation

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Ksdpfjywcl Rex Ahbodu Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: new, functionality: fully functional, grinding length: 304 mm, grinding width: 152 mm, Surface Grinder MSG 1530 BERNARDO Kdjdpfx Ajyt Hycjhbju Compact surface grinder: longitudinal, cross, and vertical feeds are all completely manual. Low-vibration spindle operation thanks to the use of high-quality special bearings. Indispensable for machining smaller parts and in fast grinding processes. Longitudinal table movement via a combination of V-guide and flat guide; cross table travel and vertical wheel feed are handled by dovetail guides. Central manual lubrication for all guides. All main components, such as the column, base, and slideways, are made from high-quality cast iron. Technical Specifications Table clamping surface width: 304 mm Table clamping surface depth: 152 mm Longitudinal travel (X): 340 mm Cross travel (Y): 170 mm Max. spindle axis to table distance: 210 mm Max. table load: 30 kg Grinding wheel size: 180 x 13 x 31.75 mm Grinding spindle speed: 2800 rpm Grinding spindle motor power: 0.55 kW Voltage: 230 V Dimensions (width): 1100 mm Dimensions (depth): 760 mm Dimensions (height): 880 mm Weight approx.: 210 kg Cross feed (Y) Manual cross feed: 2.54 mm/rev. Handwheel graduation (Y): 0.02 mm Vertical feed (Z) Manual vertical feed: 1.25 mm/rev. Handwheel graduation (Z): 0.025 mm Scope of delivery Basic tools Permanent magnetic chuck Grinding wheel flange Grinding wheel Legally required safety guards Complete DTR (technical documentation) in Polish CE certificate 24-month warranty for all, at no extra charge

Condition: as good as new (ex-display), Year of construction: 2025, GT 25 – The OPTIMUM Premium NC Grinding Machine with Siemens Touchscreen. Kedpfx Aoymdwfshbjdu • Electromagnetic chuck for securing the workpiece, with automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle with premium precision bearings • Grinding wheel can be dressed directly on the machine with an integrated dressing device • Digital position display • Machine base made of stable, torsion-resistant cast iron for maximum rigidity and stability • Longitudinal, cross, and vertical axis guideways are backlash-free and self-centering, designed as V and flat guideways • Precision ball screws • Central lubrication for guideways and feed screws • All flat guides are finely scraped, guaranteeing maximum precision in all manual movements • Safety electronics with 24 V DC • Large, decoupled handwheels on all three axes • Hydraulic lines according to DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all standard steels • Swivel control panel makes operation significantly easier • Separate hydraulic unit with heat exchanger prevents vibrations and thermal loading • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption, providing substantial cost savings Technical Data: Dimensions and Weights Length approx. 2300 mm Width/Depth approx. 1600 mm Height approx. 1675 mm Weight approx. 1700 kg Electrical Data Total connected load: 3 kW Supply voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Surface Grinding Table Length: 254 mm Width: 508 mm Grinding Wheel(s) Outer diameter: 200 mm Width: 20 mm Bore: 31.75 mm Peripheral speed: 33 m/s Spindle Speed: 2850 rpm Radial runout accuracy: 0.005 mm X-Axis Feed speed: 5 – 25 m/min Packaging unit: 1 Scope of Delivery Unit: Piece Packing unit: 1 Digital position display Coolant system Balancing arbor Grinding wheel, grit 46 Diamond dresser Operating tools Manual oil pump LED lamp Electromagnetic chuck Demagnetization function Features Electromagnetic chuck Table splash guard enclosure Automatic demagnetization device Parallel dressing device 40 W coolant system LED work lamp Leveling feet

Condition: as good as new (ex-display), Year of construction: 2025, GT 40 – The OPTIMUM Premium NC Grinding Machine with Siemens Touch Screen. • Electromagnetic clamping plate for securing the workpiece, featuring automatic demagnetization function • High-quality spindle with precision tapered roller bearings • Hardened and ground table guideways • Turcite-B coated counter-guides for high wear resistance and low friction • Grinding spindle equipped with premium precision bearings • The grinding wheel can be dressed directly on the machine using the dressing device • Digital position display • Machine base made from stable, torsion-resistant cast iron for maximum rigidity and stability • Guideways for longitudinal, cross, and vertical movements are backlash-free and self-centering, designed as V and flat ways • Precision ball screw drives • Guideways and feed screws with centralized lubrication • All flat guides are hand-scraped, guaranteeing the highest precision for all manual movements • Safety electronics with 24 V DC voltage • Large, decoupled handwheels on all three axes • Hydraulic lines compliant with DIN EN 853 • Grinding accuracy: 0.005 mm • Corundum grinding wheel, grit 46, suitable for all common steels • Swiveling control panel for greatly simplified operation • Separate hydraulic unit with heat exchanger to prevent vibrations and thermal stress • Dual-channel safety electronics • Grinding table splash guard • EMC filter class • Equipped with IE3 motor – significantly reduces energy consumption and provides substantial cost savings Dimensions and Weights Length approx. 3600 mm Width/Depth approx. 2400 mm Height approx. 1900 mm Weight approx. 3600 kg Electrical Data Total connected load: 7.5 kW Supply voltage: 400 V Mains frequency: 50 Hz Surface Grinding Table Clamping area length: 400 mm Clamping area width: 800 mm Grinding Wheel(s) Outer diameter: 350 mm Width: 40 mm Bore: 127 mm Peripheral speed: 27 m/s Spindle Speed: 1450 rpm Run-out accuracy: 0.005 mm X-Axis Feed rate: 5 – 25 m/min Standard Features • Digital position display • Coolant system • Balancing arbor • Grinding wheel, grit 46 • Diamond dresser • Operating tools • Manual oil pump • LED lamp • Electromagnetic clamping plate • Demagnetization function Equipment • Electromagnetic clamping plate • Table enclosure with splash guard • Demagnetization device • Parallel dressing device ✔ • Coolant system 125 W Kjdpfeymduqex Ahbodu • Working light: LED lamp • Leveling feet ✔

Condition: as good as new (ex-display), Year of construction: 2025, GT 30 - The OPTIMUM premium NC sanding machine with Siemens touch screen. - Electromagnetic clamping plate for fixing the workpiece with automatic demagnetization function - High-quality spindle with precision tapered roller bearings - Hardened and ground table guideways - Turcite-B coated counter guides for high wear resistance and low friction - Grinding spindle with high-quality precision bearings - Grinding wheel can be resharpened directly on the machine using a sharpening device - Digital position indicator - Machine base made of sturdy torsion-resistant cast iron for maximum rigidity and stability - Guideways for longitudinal, transverse and vertical movements are backlash-free and self-centring as V and flat tracks - Precision recirculating ball screws - Guideways and transport spindle with central lubrication - All flat guides are finely scraped and thus guarantee maximum precision of all manual movements - Safety electrics with 24 V DC voltage - Large decoupled handwheels in all three axes - Hydraulic lines according to DIN EN 853 - Sanding accuracy: 0.005 mm - Grain 46 corundum grinding wheel for all common steels - Swivel-mounted control panel makes work considerably easier - Separate hydraulic unit with heat exchanger, avoids vibrations and thermal stress - Two-channel safety electronics - Grinding table splash guard Ksdpfx Ahsymdtyjbedu - EMC filter class - With IE3 motor - consumes considerably less energy, resulting in significant cost savings Dimensions and weights Length approx. 3200 mm Width/depth approx. 2200 mm Height approx. 2100 mm Weight approx. 3000 kg Electrical data Total connected load 6.5 kW Supply voltage 400 V Mains frequency 50 Hz Surface grinding table Clamping surface length 300 mm Clamping surface width 600 mm Grinding wheel(s) Outer diameter 350 mm Width 40 mm Bore 127 mm Peripheral speed 27 m/s Spindle Speed 1450 min¯¹ Concentricity 0.005 mm X-axis Feed speed 5 - 25 m/min Scope of delivery Unit of measure: piece Packaging unit: 1 Digital position indicator Coolant device Balancing mandrel Grinding wheel grit 46 Diamond pin Operating tool Manual oil pump LED lamp Electromagnetic clamping plate Demagnetizing function Equipment Electromagnet clamping plate Splash guard table enclosure Automatic demagnetizing device Parallel dressing device ✔ Coolant device 125 W Work light LED lamp Alignment feet ✔

Condition: used, Year of construction: 2012, workpiece . workpiece diameter 15 -70 mm swing diameter max. 150 mm clamping length max. 500 mm Swing over bezel area 70 mm dimension 150 x 300 mm max. turning speeds 250 min/-1 longitudinal adjustment manuell über Kettenrad Fixed tip MK 4 (Junker D75 mm) clamping capacity ü. Hydraulik einstellbar travel -z axis max. 1000 mm feed z - Achse (CNC gesteuert) dimension D 205 x 450 mm Kdodpfx Aex H Andehbju flange diameter D 190 mm standards association D 127 mm drive 30 kW speed control mit Frequenz- Umformer max. turning speeds 4400 min/-1 type Borazon (CBN) o. Diamant mm diameter 450 mm bore D 127 mm peripheral speed max. 90 m/sec type GR-3520-NR mm diameter range D 20 - D 35 mm dimension D 80 x 250 mm flange D 100 standards association D 75 drive 1,8 kW max. turning speeds 24000 min/-1 weight of the machine ca. 7,0 t In our opinion, the machine is in good condition and can be inspected under power by appointment. There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), Year of construction: 1973, functionality: fully functional, input voltage: 380 V, Possible accessories can be negotiated on site. Kdjdpjxyqalofx Ahbou