Oberbäumer GmbH & Co. KG

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer Knsdpfx Asxqh E Hefioc 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.

Condition: good (used), Year of construction: 1998, functionality: fully functional, working width: 230 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 160 mm, power of feed motor: 7,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 8, power: 97 kW (131.88 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Four-side planer Weinig Hydromat 23 Lamella Machine 8 spindles, working width: 230 mm, working height: 160 mm, spindle diameter: 50 mm, feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping Knsdpfxsxqh Eyj Afiec 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.

Condition: used, Four-side planer WEINIG Quattromat 18 -used- Reversible knife system, Lubricant pump, Dust tested ----- Technical specifications ----- Planing width: 180 mm, Planing height: 120 mm, Number of spindles: 4, Feed speed: 8 m/min, Extraction port Ø: 4x 120 mm, Dimensions (LxWxH): 3,050x1,000x1,500 mm, Weight: 1,200 kg Ksdpsxqd Ahjfx Afijnc

Condition: used, Year of construction: 2000, machine/vehicle number: 90816, Technical specifications: 1st shaft: lower horizontal, 2nd shaft: right spindle moulder, 3rd shaft: left spindle moulder, 4th shaft: upper horizontal, 5th shaft: lower horizontal, 6th shaft: universal, ATS control, any width, maximum width: 230, maximum height: 120. Kjdpfx Afexp U R Hoijnc

Condition: repair required (used), Year of construction: 2018, functionality: not functional, machine/vehicle number: AB00003010, working width: 230 mm, planing height: 120 mm, The machine is damaged; a spindle needs to be welded onto the main body. Knsdpjxp U Nvefx Afisc

Condition: used, Gubish 6-Axis Moulding Machine Kodpfx Aoxp Ntisfijnc

Condition: used, Weinig Hydromat 23 planer and moulder for four-sided planing and profiling of wood and beams with high feed rates and four driven rollers in the table. spindles: 8 working width: 230 mm working height: 160 mm spindle 1: Bottom / 11 kW / 50 mm spindle 2: Right / 11 kW / 50 mm spindle 3: Left / 11 kW / 50 mm spindle 4: Right / 7.5 kW / 50 mm Ksdpfx Aexp Hqlsfisnc spindle 5: Top / 11 kW / 50 mm spindle 6: Bottom / 18.5 kW / 50 mm spindle 7: Top / 7.5 kW / 50 mm spindle 8: Bottom / 7.5 kW / 50 mm feed: max. 60 m/min // 11 kW // Hydraulic delivery time: on demand

Condition: used, Year of construction: 2014, Weinig Powermat 600 planer and moulder for four-sided planing and profiling of wood. spindles: 5 Construction year: 2014 Kjdpfx Asxpvdzsfisnc working width: 230 mm working height: 160 mm spindle 1: Bottom // 7.5 kW // 40 mm spindle 2: Right // 11 kW // 40 mm spindle 3: Left // according to motor with spindle 2 // 40 mm spindle 4: Top // 7.5 kW // 40 mm spindle 5: Bottom // 5.5 kW // 40 mm

Condition: used, Weinig Powermat 700 planer and moulder with CNC control for four-sided planing and profiling of wood. Available by arrangement from March 2026. Sale of this machine is subject to the sale of the briquetting press (Ref. No. 800055) or the entire planing unit (Ref. No. 100101). Knjdpfexpuufjx Afijc spindle: 6 spindle 1: Bottom / 7.5 kW / 6,000 rpm spindle 2: Right / 15 kW / 8,000 rpm spindle 3: Left / Common motor with #2 / 8,000 rpm spindle 4: Top / 11 kW / 8,000 rpm spindle 5: Top / 7.5 kW / 8,000 rpm spindle 6: Bottom / 7.5 kW / 8,000 rpm working width: 230 mm working height: 160 mm spindle diameter: 40 mm feed: 40 m/min / 5 kW Planer table length: 1.200 mm Control: Memory Plus

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig Profimat 23 four-side planer, window version with glazing bead removal or can be used as a grooving spindle ATS control and program control ----- Machine was factory overhauled by Weinig in 2024. Technical Specifications Summary (Please inquire about any additional accessories included) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically timed up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: pneumatically timed up-down glazing bead saw Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- Knodpfx Asxpn T Ujfisc > Can be used for glazing bead cutting or as a grooving machine > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with 99-program memory > Machine operation: Window package Joint control of the right spindle and the glazing bead feed via manual selector switch on the control panel > Spindles with mechanical digital display (Technical data according to the manufacturer - no guarantee!)

Condition: used, Number of spindles 8 St. Working width 230 mm Working height 120 mm Weinig Planing and moulding line ----- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!) Kjdoxpn Tujpfx Afienc

Condition: excellent (used), Year of construction: 1998, Very nice, low-hour Weinig U 23 with grooved bed. Technical specifications available on request. Knodpfoxpm Siex Afijc

Condition: excellent (used), Four-side planer SCM Compact P Max planing width: 230 mm Max planing height: 120 mm Number of spindles: 4 Spindle layout: Bottom 5.5 kW Right Knsdpoxph E Defx Afiec Left 7.5 kW Chamfering tools 7.5 kW Spindle diameter: 40 mm Two feed speeds: 6/12 m/min Pneumatic material hold-downs Infeed table length: 2500 mm

Condition: excellent (used), Four-side planer Cattelan Macchine BASIC 350 Max planing width: 350 mm Max planing height: 250 mm Minimum workpiece size: 40x20 mm Minimum length of infeed material: 700 mm Number of spindles: 4 Knjdpfx Aexpfhiefisc Spindle configuration: Bottom – 7.5 kW Top – 11 kW Right – 11 kW Left – 11 kW Chamfering units: 2 x 1.5 kW Spindle diameter: 50 mm Feed speed adjustable by frequency inverter: 0–30 m/min Outfeed table with drive and side discharge, length 4700 mm

Condition: good (used), Planer moulder 230/120 mm, profiling capable, year 2006 Kjdpsxn Uptsfx Afienc

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 305 mm, planing height: 200 mm, spindle diameter: 40 mm, planing width: 305 mm, working height: 200 mm, total width: 320 mm, total height: 1,712 mm, total length: 5,260 mm, spindle speed (max.): 6,000 rpm, input voltage: 440 V, tool diameter: 165 mm, shaft diameter: 40 mm, number of spindles: 6, power: 78 kW (106.05 HP), The machine was purchased in 2006 new it is in very good working order. Knedpexn Um Sjfx Afijc If customer wishes it can be seen working.

Condition: used, Year of construction: 2004, High speed molder 8 workstations Digital positioning Digital display Chrome table Automatic lubrication Sheitek Automatic Stacker Ksdpfx Afoxnwmujijnc Speed 65m/min 380V

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, For sale: Industrial planer LEDINEK ROTOLES 400 D. Year of manufacture: 2000 Max. working width: 400 mm Max. working height: 2–150 mm Min. workpiece length: 150 mm Max. material removal: 8 mm Rotating shaft with 34 knives Feed speed: 10–30 m/min Thickness adjustment with motor drive and digital display. Extraction hood diameter: 200 mm (requires 30 m/s) Main spindle motor: 15.0 kW Kedpfxoxnrq Ie Afionc Feed motor: 3.0 kW Total power: 18 kW Total weight: 1800 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, For sale: Industrial planer LEDINEK ROTOLES 400 D. Year of manufacture: 2000 Max. working width: 400 mm Max. working height: 2–150 mm Min. workpiece length: 150 mm Max. material removal: 8 mm Rotating shaft with 34 knives Feed speed: 10–30 m/min Thickness adjustment with motor drive and digital display. Extraction hood diameter: 200 mm (requires 30 m/s) Main spindle motor: 15.0 kW Feed motor: 3.0 kW Kedpfoxnrqhex Afionc Total power: 18 kW Total weight: 1800 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, For sale: Industrial planer LEDINEK ROTOLES 400 D. Year of manufacture: 2000 Max. working width: 400 mm Max. working height: 2–150 mm Min. workpiece length: 150 mm Max. material removal: 8 mm Rotating shaft with 34 knives Feed speed: 10–30 m/min Knjdpfxjxnrc Rs Afijc Thickness adjustment with motor drive and digital display. Extraction hood diameter: 200 mm (requires 30 m/s) Main spindle motor: 15.0 kW Feed motor: 3.0 kW Total power: 18 kW Total weight: 1800 kg

Condition: used, Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. An NC-controlled line for planing and profiling window scantlings, including glazing bead removal or other planing tasks, with automatic workpiece return to the operator. Knsdpexnlhyefx Afijc spindles: 4 + 2 working width: 230 mm working height: 120 mm spindle 1: 7.5 kW / 50 mm / 8,000 rpm spindle 2: 11 kW / 50 mm / 8,000 rpm spindle 3: Common motor with spindle 2 / 50 mm / 8,000 rpm spindle 4: 7.5 kW / 50 mm / 8,000 rpm Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm feed: 5-24 m/min service: PC Control Nexus NC axes: Unimat 2 & 3, Uniplan 1

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, planing height: 150 mm, spindle diameter: 40 mm, planing width: 230 mm, total height: 2,000 mm, total length: 7,600 mm, overall weight: 6,500 kg, number of spindles: 8, Leadermac, Hypermac 823 8 spindles Planing width 15–230 mm Planing thickness 10–150 mm Minimum workpiece length 200 mm Spindle speed 6000 rpm Spindle diameter 40 mm Permitted saw circle – vertical spindle: 112–232 mm, horizontal: 100–225 mm Feed speed 6–24 m/min 6500 kg Knsdpfjxmlk Sox Afisc Length 7600 mm Height 2000 mm Depth 2000 mm 400 volt Manual in Dutch and English

Condition: used, Year of construction: 1980, 5 spindles – cast-iron base. Working width: 25–175 mm. Usable working height: 10–110 mm. Spindle rotation speed: 6000 rpm. Spindle diameter: 40 mm. Horizontal spindle length: 180 mm. Vertical spindle length: 130 mm. Minimum diameter of shaping tools: 100 mm. Maximum diameter of shaping tools: 200 mm. Maximum diameter of tools mounted on the universal spindle: 180 mm. Axial adjustment of horizontal spindles: 50 mm. Axial adjustment of vertical spindles: 45 mm. Feeding roller diameter: 140 mm. Pre-planing table length: 2000 mm. Variable feed speed: 4–24 m/min. Spring-loaded feed rollers. Motorized adjustment of the left spindle, movable with automatic programmer. Motor power: 1st horizontal bottom: HP 5.5 2nd–3rd vertical right + left: HP 4 + 5.5 4th horizontal top: HP 5.5 5th universal 380°: HP 5.5 Feed motor power: HP 3 Kjdpjxl Tfbjfx Afijnc MACHINE SOLD AS IS.

Condition: good (used), Year of construction: 2001, WEINIG MOULDER TYPE PROFIMAT 23 FORTEC 5 SPINDLES NO. 94151 YEAR 2001 WITH AUTOMATIC OUTFEED SYSTEM Weinig Year: 2001 Motor power: 33 kW Capacity (mm): 230 mm x 120 mm Working units: 5 1st unit: surface planer 2nd unit: right spindle moulder 3rd unit: left spindle moulder 4th unit: thickness planer 5th unit: bottom horizontal spindle Kodpfxoxl Rv Re Afijnc Infeed table length: 2000 mm Noise reduction lips: Yes Control panel with Siemens SIMATIC OP7 programmable 2-axis control Feed speed: variable speed drive from 5 to 24 m/min Electric rise and fall Digital counter on the control panel and digital mechanical counters at each axis movement Guard: Yes CE compliant: Yes Special features: - Pneumatically retractable infeed roller before the surface planer - Independent pneumatic feed pressure - Forward and reverse wood feed device - Independent spindle start-up, except the two spindle moulders, which operate together - 2-axis height and width programming - Device for all widths with automatic infeed side pusher coordinated with the left spindle moulder - Disengageable system for manual operation - Centralized lubrication system for tables with Waxilit groove - Profiling cover, 180 mm diameter, on right and left spindle moulders and bottom horizontal spindle - Short wood processing device - Extraction diameter: 5 x 140 mm

Condition: used, 6-head planer. High performance. Used, in excellent condition. FEATURES - Made in Germany - Universal spindle Knedpfoxl Rhgox Afioc - Used planer, in very good condition