BIMATEC SORALUCE Zerspanungstechnologie GmbH

Condition: ready for operation (used), Year of construction: 1981, Functionality: fully functional, 1 used Knödler feed gear HF14/5 n1 = 1400 rpm n2 = 0-35 rpm. M2 1200 Nm 4 kW i=25.9 Drdy9B

Condition: good (used), Year of construction: 1995, Universal milling machine, make AUERBACH, type: 315 FUW, year of manufacture 1995 with 3-axis digital display HEIDENHAIN, hydraulic tool clamp, machine vice tool holder, counter holder for horizontal milling, coolant system, machine documentation in good condition. Travel paths: X 500 mm Y 400 mm Z 330 mm Table: 400 mm X 700 mm Spindle mount: ISO 40 Spindle speeds: 20-3000 rpm Rapid traverse: X / Y / Z. For further data, see data sheet. Drcyjx

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 201112149n, Very nice milling machine, hardly used. automatic feed x and y axis height electrically adjustable head can be moved forwards/backwards + adjustable under degrees digital readout Bdlz2Er2Mw cooling for sale because it is no longer used can be seen working

Condition: used, Year of construction: 1969, x-travel 700 mm y-travel 225 mm z-travel 400 mm turning speed range - horizontal 45 - 1800 U/min taper MK SK40 table surface area 1000 x 300 mm Dqxx7Z total power requirement 3,8 kW weight of the machine ca. 1,75 t dimensions of the machine ca. 1,3 x 1,7 x 1,8 m

Condition: like new (used), Year of construction: 2016, Ajax AJUM 350 Horizontal Milling Machine Dqwosl Excellent condition - Like new! With Arbor & support arms DRO Pendant control Year 2016 Manuals

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 161936, feed length X-axis: 2,000 mm, feed length Y-axis: 350 mm, feed length Z-axis: 750 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 750 mm, feed rate X-axis: 1,360 m/min, feed rate Y-axis: 430 m/min, feed rate Z-axis: 280 m/min, spindle speed (max.): 505 rpm, spindle speed (min.): 82 rpm, quill stroke: 350 mm, quill diameter: 130 mm, tool mount: 50 mm, rapid traverse X-axis: 1,360 m/min, rapid traverse Y-axis: 430 m/min, rapid traverse Z-axis: 280 m/min, total height: 2,150 mm, total width: 2,060 mm, total length: 5,250 mm, table width: 800 mm, table length: 2,000 mm, table height: 700 mm, type of input current: three-phase, rotational speed (max.): 505 rpm, rotational speed (min.): 82 rpm, table load: 1,500 kg, overall weight: 3,725 kg, input voltage: 400 V, control cabinet height: 2,150 mm, workpiece weight (max.): 1,500 kg, distance table to spindle center: 750 mm, space requirement width: 2,060 mm, space requirement length: 5,250 mm, space requirement height: 2,150 mm, input frequency: 50 Hz, Equipment: documentation/manual, Horizontal milling machine Knuth HBF 208 very good condition X axis 2000 mm Y - axis 350 mm Z - 750 mm, tool holder ISO 50 Used Year 2018 Table clamping surface 2000 x 800 mm Positioning display X Y Z, feed X 0 - 1360, Z 0 - 280, very good condition Power 12 KW Clamping angle 900 x 550 mm with 2 hydraulic vises Jaw width 130 mm Clamping range 0-250 mm Jcznnr8Wm

Condition: excellent (used), max. workpiece diameter 300 mm hobbing length 1000 mm clamping length 2400 mm spindle head ISO 40 distance work spindle /surface of the table 180 - 330 mm surface area 2410 x 375 mm Hxnx80Dey longitudinal feed 1000 mm vertical movement of the milling spindle 150 mm turning speeds 45 - 500 U/min total power requirement kW weight of the machine ca. 5,6 t dimensions of the machine ca. 3,0 x 1,6 x 1,9 m

Condition: good (used), Horizontal end milling machine with electro-pneumatic feed and automatic work cycle. Milling out of square +45° /90° / -45°. Variable tool rotation speed with electronic variator to improve the quality of the work on the painted profile and out of square. Quick change of the cutter unit with pneumatic control. C07Vrte33M Scratch-proof work surface. Soundproofed and fully enclosed work area. The soundproof tunnel, L=1,100 mm., with automatic control, reduces the noise emitted by the machine to approximately 75 dB (only milling in square at 90°). The self-tilting revolver stop eliminates contact between the stop and the piece during the feed. Tool holder kit and tools included in the supply

Condition: good (used), Year of construction: 1974, Functionality: limited functionality, Rotary Table 2500X3500 mm, Floor plate 4500X13500 mm; Overall size L=20000 mm, l=15000 mm, Cqm9Cq3Bnc H=9000 mm; Strokes: X = 12000 mm, Y = 3500 mm, Z =1000 mm

Condition: used, Technical details: x-travel: 450 mm y-travel: 150 mm z-travel: 400 mm distance between column - table edge: min./max.: 100 / 250 mm turning speed range: 25, 44, 78, 130, 228, 400 / 6 step U/min feed:: X/Y: 10 - 100 / 8 step mm/min Table dimensions: 990 x 300 mm table surface area: 800 x 195 mm table swivelabel +/-: 30° ° total power requirement: nicht bekannt kW weight approx.: 1200 kg dimension machine xH: 1,5 x 1,3 x 1,5 m Horizontal milling machine, currently a tool clamped milling arbor Ø 32mm with hobbing cutter. Crkitvdj Machine vice included. *

Condition: new, I sell, milling machine new. Uyy8Epqtmp

Condition: used, Year of construction: 1979, Functionality: fully functional, Table dimensions 980X980 mm; Strokes:X=1000mm,Y=1000 mm,W=1000mm,Z=600 mm; Uj9W0W9Kth Overall size: L=4500 mm, l=7000 mm, H = 5000 mm

Condition: good (used), Year of construction: 1975, Functionality: limited functionality, Tos vhn 11 -110 horizontal boring and milling machine D7Vymhc Strokes: X = 1500 mm, Y=1500 mm, W=500 mm, Z=1000 mm

Condition: excellent (used), Year of construction: 1987, Rotary table 2500X2500 mm; Floor plate =3000X7500mm; Overall size L=18500 mm, l=11200mm,H=9500 mm Strokes: X=10000mm,Y=3000 mm Dps8Z9

Condition: excellent (used), Year of construction: 1974, Functionality: fully functional, FOREST CN F 160 FLOOR TYPE HORIZONTAL BORING AND MILLING MACHINE Rotary Table 2500X3500 mm, Floor plate 4500X13500 mm; Dps8Lj Overall size L=20000 mm, l=15000 mm, H=9000 mm; Strokes: X = 12000 mm, Y = 3500 mm, Z =1000 mm

Condition: good (used), Year of construction: 1974, Functionality: fully functional, LINE SL-240 F 160 12000x3000 MILLING MACHINE (PLANO MILLER) Moving Table useful surface: 1table=8000x3500mm / 2table=16000x3500mm Bezyqypng Useful distance between Columns: 4000mm Distance between Table and Cross Rail: max 3000mm Machine weight: approx. 280000Kg External Dimension of the machine: LxWxH= 37000x9000x8000mm You can find additional details in the document below.

Condition: used, machine/vehicle number: 1485, x-travel:300 mm y-travel:110 mm z-travel:220 mm number of T-slots:3 Bgltykrano T-slot - size:12 mm T-slot - distance:37,5 mm table clamping area :600 x 115 mm Work spindle to clamping surface:225 mm Center of work spindle to lower edge of counterholder:93 mm Distance from the stand sliding surface to the counter support:250 mm Distance from the work spindle head to the guide bushing:200 mm Distance from the work spindle head to the rear edge of the table:80 mm spindle head:M3 diameter of main spindle in front bearing:32 mm total power requirement:1,5 kW weight of the machine ca.:500 kg

Condition: good (used), Year of construction: 1992, Travel : X-axis (longitudinal movement) 880 mm Y-axis (transverse movement) 300 mm Z-axis (vertical movement) 385 mm Clamping table : Clamping surface 315 x 1250 mm Table load 1000 kg Spindle head : Tool holder 50 SK Speed 28 - 1400 rpm Drive power 5.5 kW Feed : X-, Y-axis 16 - 800 mm/min Z-axis 5 - 250 mm/min Rapid traverse : X-Y-axis 3150 mm/min Z-axis 1000 mm/min connected load : 8 kW Weight : 4.0 t Space requirement : L x W x H 2.3 x 2.0 x 2.6 m Accessories : * various tool holders Bojtg8K7Fcc * Operating instructions

Condition: ready for operation (used), Aspar horizontal milling machine X-axis: 950mm Y-axis: 250mm Z-axis: 500mm Tour speed: Max 530 RPM Cone: 60mm Bed dimensions: 1300x300 mm Transport dimensions: 160x190x150 cm (LxWxH) Location: Hamont-Achel, Belgium Aspar horizontal milling machine X axis: 950mm Y axis: 250mm Z axis: 500mm Speed: Max 530 RPM Cone: 60mm Bed dimensions: 1300x300 mm Transport dimensions: 160x190x150 cm (LxWxH) Location: Hamont-Achel, Belgium Ngi2Nlrg Aspar Horizontalfräsmaschine X axis: 950 mm Y-axis: 250 mm Z-axis: 500 mm Geschwindigkeit: Max. 530 U/min Cone: 60 mm Bettabmessungen: 1300x300 mm Transport dimensions: 160x190x150 cm (LxWxH) Standort: Hamont-Achel, Belgium

Condition: used, Year of construction: 1975, x-travel 900 mm y-travel 340 mm z-travel 380 mm total power requirement 3 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2*2*2 m Horizontal console milling machine Spindle SK 40 Speed range 30-1500 min-1 Feed rates 4 / 11 to 230 / 570 mm/min Weight approx. 1700 kg Pip3Rlgng Working area: 900 x 340 x 380 Control: Table size 1200 x 250

Year of construction: 1966, Condition: good (used), machine/vehicle number: 36127, Offer 21537 98Txn3X Technical data: - Table size approx. 1100 x 260 mm - Working range of axes - X (longitudinal) approx. 815 mm - Y ( transverse ) approx. 400 mm - Z (vertical) approx. 410 mm - milling unit tiltable + inclinable + rotatable - horiz. Shifting path of the milling unit 410 mm - table can be tilted 45° to both sides - max. distance milling spindle - table surface 500 mm - tool holder ISO - quill stroke mm - working spindle speed adjustable in steps 67 - 1400 rpm - Mot table feeds X ; Y ; Z - drive 400 V / 4,5 kW - Space requirement approx. W 1900 x H 1900 x D 1900 mm - Weight approx. 3200 kg

Condition: new, machine/vehicle number: 280261 0001, BENEFITS: -Compact entry-level model in the field of servos -Low maintenance -Control with integrated PC controller -Compact desktop machine -Ideal for use in schools and training, as well as orthopedic milling machines and small series production SUITABLE FOR: -Milling -Drilling -Measuring -Cutting -Dispensing -Glueing -Casting -Burring -Polishing Bpfpnmii -Testing -Scanning -Scaling -Printing -Placing -Mounting -Screwing -Etc.

Condition: new, machine/vehicle number: 280270 0001, ADVANTAGES: compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included ICP series - with stepper motor drive and path control GENERAL CNC machines of the ICP series are further developments of the proven CPM series. The introduction of a sliding door means that the machines can now be operated from a seated position, which results in shorter cycle times for hood opening, among other things. The chassis is completely bolted together instead of welded as in the predecessors. This results in greater precision when setting up the machine, as well as improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in lower noise levels. X = 400mm Y = 300 mm Cyhjlfihqv Z = 140 mm Diffuser = 200 mm -in use for over 40 years!!! -over 20,000 systems sold. HIGHLIGHTS compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included Mosaic Safety Circle POPULAR MATERIAL Foam Plastics ACCESSORIES Length gauge Spindles (iFM1000ER, iFM1000WS) Quick clamping system Spannzangen Suction device

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: N20Rfonh - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Condition: good (used), used boring machine Brand: Juaristi Model: MDR 75 Weight: 5600kg Motor power: 10KW 2-axis digital FAGOR. Cbychyfiwz Shank diameter: 75mm Longitudinal course (X axis): 1,150mm Vertical course (Y axis): 700mm Column transversal course (Axis W): 800mm Cane exit course (Z axis): 500mm Table surface: 900x700mm Speeds: 22-1055rpm Number of advances: 9 of 0.04-3 mm/rev.