Luhan Werkzeugmaschinen

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, in TOP condition Technical data: >> Year of manufacture 2006 >> Manufacturer: Heidenhain, type iTNC 530 >> Travels X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed rate continuously programmable up to X, Y, Z 20000 mm/min >> C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- and Z-axis 50 m/min >> X-axis 80 m/min (linear drive) >> B-axis 40 rpm Ncedpfxozg Dnvo Alnju >> C-axis 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping surface Ø 500 x 380 mm >> T-slot spacing 63/14H7 >> Table load 200 kg >> Dimensions and weight: approx. >> Machine without control and attachments >> Depth 3.0 meters, width 2.4 meters, height 2.6 meters >> Weight approx. 7000 kg >> Operating voltage 400 V >> Electric handwheel Heidenhain HR 410 >> Power connection 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extractor >> IKZ 40 Bar >> Coolant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Compressed air supply to the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage detection >> Complete documentation The following work has been carried out: >> Main spindle overhauled >> Complete maintenance: All coolant hoses and pneumatic hoses renewed, filters new, fluids and belts renewed. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance report) About the machine: Offered is a Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain. The machine is in very good condition. The main spindle has been overhauled (replacement spindle) on the DMU, completely serviced, and an acceptance report has been created. Invoices for the overhaul of 42,000 Euros (net) are available. Take the opportunity to inspect and test the machine on site while it is powered up.

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. 10000 rpm 500mm x 450mm x 400mm Ncjdpezggrdjfx Alnju SK 40, 16 tool places SINUMERIK 840 D

Condition: ready for operation (used), Year of construction: 2011, 5-AXIS Machining Center Brand: DMG MORI Type: DMU 50 Year: 2011 CNC: Heidenhain iTNC530 Nsdpszgca Defx Alnecu Equipped with: Integrated rotary table, dia. 630 x 500 mm / 300 kg 13 kW spindle – 10,000 rpm 16-position tool changer 3D probe 3D quickset Tool probe Coolant gun Electronic handwheel Chip conveyor Specifications: Table surface 630 x 500 mm X-axis travel 500 mm Y-axis travel 420 mm Z-axis travel 400 mm B-axis -5/+110° C-axis 360,000° Spindle speed 20 - 10,000 rpm Spindle power 13 KW Spindle taper SK 40 Rapid traverse XYZ 24 m/min Machine dimensions with chip conveyor 4670 x 2350 x H 2750 mm Approximate weight 4,680 kg

Condition: excellent (used), Year of construction: 2012, operating hours: 10,600 h, 5-axis machining center Brand: DMG MORI Type: DMU 80 Monoblock Year: 2012 (spindle hours: 10,600) CNC: Heidenhain iTNC 530 Equipped with: Integrated rotary table, dia. 700 mm / 650 kg 29 kW spindle – 12,000 rpm 32-position tool changer TS 649 touch probe 3D quickset 40 bar central coolant system BLUM laser tool probe Coolant gun Chip conveyor Specifications: Table surface 1250 x 700 mm X-axis travel 880 mm Y-axis travel 630 mm Z-axis travel 635 mm Njdszgbv Dspfx Alnocu B-axis -120/+30° C-axis 360,000° Spindle speed 20 - 12,000 rpm Spindle power 29 KW Spindle taper SK 40 Rapid traverse XYZ 42 m/min Machine dimensions with chip conveyor 3440 x 2850 x H 2750 mm Approximate weight 7,480 kg

Condition: ready for operation (used), Year of construction: 2001, Available immediately from our location: 5-axis machining center Deckel Maho Type DMU 50 M Year of manufacture 2001 Control system Heidenhain TNC 124 5 axes (3 plus 2) Manual rotary axes with B and C tilting rotary table Axes B and C are displayed in the control system Table 700 x 500 mm Travel ranges X/Y/Z 500 / 400 / 400 mm Table load 200 kg Spindle SK 40 Spindle speeds 20 – 4500 rpm Drive power 9 / 13 kW Rotation range C 360 degrees Tilting range plus 95 / minus 10 degrees Feed rate up to 5000 mm/min Spindle speeds 20 – 4500 rpm Weight 3 tons Ncsdpfxjzgah Ej Alnou Coolant system Price: Euro 6,500.— plus VAT, ex location.

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 78 mm, travel distance Y-axis: 56 mm, travel distance Z-axis: 50 mm, General Speed: 60,000 rpm Spindle power: 0.625 kW Torque: 10 Ncm Tool holder: HSK-EZ15 Number of tools: 60 Ncedjzf Hrnepfx Alnou Working area Travel in X: 78 mm Travel in Y: 56 mm Travel in Z: 50 mm B-axis: -110° to +110° C-axis: 400 rpm Chip-to-chip time: 3.5 sec Rapid traverse: X/Y/Z 30/30/30 m/min Workpiece changing device Technology: Zero-point clamping system Workpiece changing time: 10 sec Max. table load: 10 kg Equipment Chip management: Chip conveyor Coolant management: Coolant system Tool measurement: WZK length measurement / -break Other: Automation Feed 5 - retrofittable

Condition: excellent (used), Year of construction: 2015, operating hours: 16,927 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, Manufacturer: DMG MORI Type: DMF 260-11 linear Year of manufacture: 2015 Control system: Heidenhain 530 Main spindle renewed in 2026 Technical data: Travel distances: - x-axis: 2,600 mm - y-axis: 1,100 mm - z-axis: 900 mm - b-axis: +/-100 degrees Ncjdjzfzbkjpfx Alnou - c-axis: nx 360 degrees Main spindle: - Speed range: 20 - 10,000 rpm - Drive power (40/100%): 44 / 32 kW - Torque (40/100%): 303 / 275 Nm - Tool holder: SK 50 Work table: - Fixed table with integrated rotary table - Table clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool positions: 60 - Chip-to-chip change time: 7.5 s - Operating hours: approx. 16,927 h Technical features: - Internal cooling system 40 bar - Spray gun for chip extraction - Rotating viewing window Accessories: - Paper band filter 600 l - Chip conveyor - 2x oil and emulsion mist separators - Electronic handwheel

Condition: excellent (used), Year of construction: 1997, Heidenhain Mill-Plus control system Travel ranges X/Y/Z: 500 x 380 x 380 mm Ncedpfx Aszfx Ubolnsu Clamping surface: 500 x 400 mm Tool magazine for 24 tools, SK 40 Spindle speed: 8,000 rpm NC rotary and tilting table Chip conveyor

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 33 kVA, torque: 121 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We are offering this very well-maintained DMG MORI CMX 50 U universal machining center, manufactured in 2019, for sale. For sale is a used DMG MORI CMX 50 U universal machining center from 2019, equipped with a DMG MORI HEIDENHAIN TNC 620 control system. Ncedpszfqt Ajfx Alneu The machine is currently connected, fully functional, and can be inspected and tested on-site. A test run can be arranged by appointment. Equipment: • Universal machining center DMG MORI CMX 50 U • Heidenhain TNC 620 control system • Swiveling round table with digital drives o B-axis: -10° to +95° o C-axis: 360° • AC main drive 13/9 kW (40/100 % ED) • Tool holder SK40 according to DIN 69871 • Tool magazine with 30 positions and double gripper • Direct linear scale X, Y, Z • Internal coolant supply 12 bar • Coolant/air blast switching via M-function • Chip conveyor (wiper type) with 250 l tank • Coolant spray gun for chip removal • Electronic handwheel • Bed and ATC arm flushing via M-function • Cabin roof • Signal lamp 4-color • Renishaw probe kit for Heidenhain control • MPC 2.0 machine protection control Scope of delivery: • Machine including existing documentation (if available) Additional note: The tools, vices, risers, marking devices, and other accessories visible in the pictures are not included in the sale price. These can be purchased separately if desired. Location: Germany Inspection and test run are expressly welcome. Legal note: The sale takes place in the existing condition as inspected, with exclusion of any warranty. It is a used machine with signs of wear and tear due to age and use. The following information has been provided to the best of our knowledge and belief, and we assume no liability for any errors or discrepancies. Please check all information before further use. Manufacturer: DMG MORI Model: CMX 50 U Year of manufacture: 2019 Condition: very good Category ID: 1457 Type ID: 4166 Machine type: Universal machining center If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2001, operating hours: 17,800 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: TNC 430, table width: 600 mm, table length: 1,000 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 17,800 h, spindle motor power: 15,000 W, Equipment: documentation/manual, Tool magazine, 20 positions, SK 40 taper, controlled by TNC 430. Ncedpozd Dbwsfx Alnou

Condition: used, Year of construction: 2000, BAZ cover for Maho DMU 50 evo, year of manufacture 2000. Ncjdpfx Ajzdyugjlnsu

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: Serien-Nr.: 107.84.00.188,, CNC machining center, manufacturer: Mikron, type: HSM 400, year of manufacture: 2005 Serial number: 107.84.00.188, travel ranges (x/y/z-axis): 400x450x350 mm, tool holder: HKS40E, max. spindle speed: 30,000 rpm, spindle drive: 13 kW, Njdpfx Aszdtacjlnecu recorded operating/load hours: 44,899/32,369 (13,350 spindle hours since replacement) CNC control system: HEIDENHAIN iTNC530 Pallet table PPC 320x320 mm, 7-position pallet changer, 68-position tool changer, 1 Cooling unit BURN, 1 extraction system KELLER L-Cut, year of manufacture: 2012, Setup probe PS 32 (WITHOUT any further accessories)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, controller manufacturer: Heidenhain iTNC 530, controller model: Heidenhain, spindle speed (max.): 18,000 rpm, operating hours of spindle: 40,600 h, coolant supply: 40 bar, spindle motor power: 35,000 W, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, Deckel Maho DMG DMU 50 eVo linear Year: 2006 CNC controller: Heidenhain iTNC 530 Nedpfxjzdqzko Alnscu 5 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle speed rpm: 18000 rpm Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center : 40 bar Tool holder: SK40 Tool magazine slots: 60 Under power and ready for inspect Located in Israel

Condition: good (used), X-Axis: 500mm Y-Axis: 400mm Z-Axis: 400mm Table Length:800mm Table Width:460mm Table load: 400 Ncsdpfx Alszdf Efoneu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 16i-MB, overall weight: 1,700 kg, spindle speed (min.): 500 rpm, spindle speed (max.): 30,000 rpm, spindle motor power: 10,000 W, spindle nose: HSK-E40, number of slots in tool magazine: 48, tool length: 95 mm, tool diameter: 63 mm, input voltage: 400 V, type of input current: three-phase, input current: 25 A, CNC Machining center WILLEMIN W 408MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control: FANUC 16i-MB Number of axes: 5 Stroke X axis: 250 [mm] Stroke Y axis: 200 [mm] Stroke Z axis: 300 [mm] Feed rate on X, Y and Z axes: 30000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Main spindle max. speed: 6000 [rpm] Main spindle max. power: 3.7 [kW] Angular C axis stroke: 360 [°] B axis swivelling stroke: 115 [°] Nsdpfx Aszcx Dfelnocu Spindle type: HSK-E40 Min. spindle speed: 500 [rpm] Max. spindle speed: 30000 [rpm] Spindle power: 10 [kW] Tool changer magazin number of stations: 48 Max. tool lenght: 95 [mm] Max. tool diameter: 63 [mm] Lubrication tank capacity: 80 [l] Collant pump flow rate: 40 [l/min] Rated current: 25 [A] Supply voltage: 400 [V] Machine weight: 1700 [Kg] More information upon request.

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 3-Axis Machining Center Deckel Maho Type DMU 60T Year 2001 CNC Heidenhain X-axis 630 mm Y-axis 560 mm Nsdpfx Alszb Exasnecu Z-axis 560 mm

Condition: excellent (used), Year of construction: 2014, HEIDENHAIN iTNC 530 control with A + C axis Working travels 200 x 200 x 280 mm Table swivelling -10°/+130° Table rotating 360° Nedszbrl Hspfx Alnjcu Spindle taper HSK E-32 Spindle speeds -42'000 rpm tool changer 60 pos. Cooling through spindle 3D measuring tracer Laser tool setting system Tool breakage control system Zero point clamping system System 3R Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2007, functionality: fully functional, DMG DMU 50 3+2 axes Control system: Heidenhain iTNC 530 Operating hours: 11,275 hours (program time) X-axis travel: 500 mm Y-axis travel: 450 mm Z-axis travel: 400 mm Control system: iTNC 530 Heidenhain Spindle speed range – main spindle: 20 – 10,000 min/-1 Tool holder: SK 40 DIN 69871 Table surface area: 700 x 500 mm Maximum table load: 500 kg T-slots: 7 x 14 x 63 mm Number of tool positions: 30 Maximum tool weight: 6 kg Ncedpfsza T A Djx Alnsu Rapid traverse rate: 24 m/min Feed force: 4.5 kN Feed rate: 1 – 24,000 mm/min Total power requirement: 26 kVA Machine weight: approx. 4.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Chip conveyor Handwheel Measuring probe Coolant gun Available immediately

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Nsdpfx Ajza Apaslnecu Siemens Sinumerik ONE control system, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, 24-position tool changer, Linear axis speeds X/Y/Z 24 m/min, Tool holder SK 40, Spindle speed up to 12,000 rpm, Chip conveyor, Renishaw probing system kit, Coolant spray gun, Enclosure roof, Internal high-pressure cooling 20 bar, Bed flushing via M-function, Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator Ø 150 mm, 4th axis package, LEHMANN rotary table EA-520.L, with automatic spindle clamping, Center height: 180 mm, Compact and stable tailstock with large roller bearing, Prepared for automatic clamping, Permissible hydraulic pressure max. 220 bar, Steel clamping bridge L/W 600/270 mm, Base plate steel, Tropical package, Active cooling unit for control cabinet, Blow-off air externally and internally (through spindle center) can be activated via M-function, External electronic handwheel, Software option - DXF import, Machine with 2100 spindle hours.

Condition: good (used), Year of construction: 2023, functionality: fully functional, DMG Mori M2 Pro, Year of manufacture 2023 / Commissioned in 2024, Control system Siemens Sinumerik ONE, Travel range X/Y/Z 1100/550/510 mm, Table size 1400 x 600 mm, Tool changer with 24 positions, Linear axes X/Y/Z 24 m/min Tool holder SK 40, Spindle speed up to 12,000 rpm, Chip conveyor Renishaw probing system kit Coolant spray gun Enclosure roof Internal high-pressure cooling 20 bar, Bed flushing via M-function Job Shop package for SIEMENS SINUMERIK ONE, Mechanical preparation for oil mist separator, Ø 150 mm, 4th axis package, -Rotary table Lehmann, type: EA-510.L NE with indirect measuring system, Electrical and pneumatic preparation Software preparation for Rotary table machining lRACYL software for surface machining Tilting cycle (Cycle 800) Holding torque spindle clamping: 800 Nm Max. speed: 65 rpm, Nodpfoza Alusx Alnjcu Center height 150 mm, Rotary table positioned along the X-axis on the right side of the work table, Manual chuck (three-jaw), diameter 160 mm, Tailstock, manual, for NC rotary table, stroke: 40 mm, center height 150 mm, Tropical package, Active cooling unit for control cabinet, Compressed air, external and internal (through spindle center), can be activated via M-function, External electronic handwheel, Software option - DXF import, Machine with 1800 spindle hours.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,215 h, functionality: fully functional, machine/vehicle number: 11170003783, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller model: Heidenhain iTNC 530, workpiece weight (max.): 800 kg, spindle speed (max.): 16,000 rpm, coolant supply: 20 bar, spindle nose: HSK-63, number of spindles: 1, number of slots in tool magazine: 60, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Rotary table diameter: 900 x 630 mm Coolant flushing system Electronic handwheel Coolant gun QuickSet cycle 3D measuring probe, Heidenhain Operating mode 4 Air cooling via spindle Internal coolant supply via spindle Operating hours: 63,490 hours Programming hours: 28,215 hours Nedpfx Aszabqcslnecu Without clamping devices Without tools The machine is fully functional and still in operation. An inspection under power can be arranged upon request.

Condition: reconditioned (used), Year of construction: 2016, operating hours: 9,701 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: series 31i-B5, overall weight: 3,300 kg, spindle speed (max.): 42,000 rpm, spindle nose: A2-4", number of spindles: 2, number of slots in tool magazine: 72, tool length: 150 mm, tool diameter: 80 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC machining centre WILLEMIN MACODEL W508MT TECHNICAL CHARACTERISTICS: Year of manufacturing: 2016 CNC control: FANUC series 31i-B5 Number of simultaneous axes: 5 Stroke X axis: 450 [mm] Stroke Y axis: 200 [mm] Stroke Z axis: 425 [mm] Traversing feeds X, Y and Z axes: 40000 [mm/min] Axes acceleration: 10 [m/s²] Max. bar diameter in turning spindle: 42 [mm] Main spindle max. speed: 6000 [rpm] Main spindle max. power: 7.5 [kW] Angular A axis stroke: 360 [°] Njdpfoy Uwp Ejx Alnscu Resolution A axis: 0.001 [°] Drive A axis: Torque-motor Spindle taper A axis: A2-4" B axis swivelling stroke: -15 [°] / +100 [°] Resolution B axis: 0.001 [°] Drive B axis: Torque-motor Spindle type: HSK-E40 Max. spindle speed: 42000 [rpm] Tool changer magazin number of stations: 72 Max. tool lenght: 150 [mm] Max. tool diameter: 80 [mm] Tool change time: 1 [sec] Chip to chip time: 3 [sec] Lubrication tank capacity: 150 [l] Collant pump flow rate: 60 [l/min] Rated current: 50 [A] Total power required: 35 [kVA] Supply voltage: 400 [V] Working hours: 9701 [h] Machine weight: 3300 [Kg] INCLUDED EQUIPMENT: x1 Back working unit with integrated 3-position turret on linear slide x1 Vise on back working unit x1 Counter-spindle on back working unit x1 42,000 rpm spindle with air/oil lubrication x1 RENISHAW OMP40-2 part probe x1 BLUM LaserControl NT laser measuring system for tool setting and tool monitoring x1 DETECTOR FRANCE type 202 tool breakage detection device x1 A2-4" collet chuck Set of 58 HSK-E40 tool holders x1 Self-tightening drill chuck LNS Super Hydrobar bar feeder, type 6.42 HS 3.2 Various equipment for LNS Super Hydrobar bar feeder Set of technical manuals x1 parameter backup system Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, including CNC milling, drilling, and tapping machines, as well as CNC grinding machines.

Condition: excellent (used), Year of construction: 2000, Deckel Maho DMCU 60T New in: 2001 Control Manufacturer: Heidenhain Control Type: TNC 426 Ncodpfxjy T Irns Alneu X-axis travel: 600 mm Y-axis travel: 525 mm Z-axis travel: 500 mm Spindle speed: 6300 1/1000 Tool holder: SK40 Rapid traverse rate X, Y / Z: 18/17 m/min Feed rate range X, Y, Z: 10000 mm/min Universal table: 750x530 mm Accessories: Chip conveyor, coolant system, and documentation Condition: Operational - wear and tear consistent with age

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: chip conveyor, documentation/manual, 5-AXIS MACHINING CENTER DMG MORI HSC 70, YEAR OF MANUFACTURE 2015 EQUIPPED WITH HEIDENHAIN TNC 640 ELECTRONIC HANDWHEEL TRAVEL: X 885, Y 600, Z 450, B +20°/-110°, C, X 360° Ncodpfxjy Tv R Ee Alnju SPINDLE: 18,000 RPM, 15 KW, HSK-A63 TABLE DIAMETER: 600 MM 30-TOOL TOOL CHANGER INTERNAL COOLANT: 40 BARS LASER TOOL SENSOR: BLUM PART MEASUREMENT PROBE: DMG TS649 CHIP CONVEYOR

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, rotational speed (max.): 42,000 rpm, spindle speed (max.): 42,000 rpm, spindle motor power: 12,000 W, Equipment: documentation/manual, MIKRON HSM 400 HIGH-SPEED VERTICAL MACHINING CENTER, YEAR OF MANUFACTURE 2005 MINERALIT ANTI-VIBRATION PORTAL STRUCTURE POSSIBILITY OF AUTOMATION EQUIPPED WITH HEIDENHAIN TNC 530 TRAVEL: X 400 Y 450 Z 350 MM ELECTRONIC HANDWHEEL ELECTRIC SPINDLE HEAD AT 42,000 RPM, 12 KW, HSK-E40 TABLE EQUIPPED WITH EROWA UPC 320 RECEIVER 36-TOOL CHANGER HEAD COOLING SYSTEM Nsdpsy Tvzqjfx Alnecu MACHINE WEIGHT 8000 KG