Normar Trading AS

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Tsunezawa Group automatic filleting machine that can be operated by 1 person. This is a specialised, high-efficiency filleting machine designed for salmon processing, specifically to remove the belly bones while producing a three-piece fillet (three-way filleting). Hnsdpfxoy Rimzo Ag Isl Model - TAF-BG Filleting Machine. Serial number – 8047. Date of manufacture – 2019. Throughput – 20 to 30 fish / minute, depending on fish size. Processing capability – can handle fresh salmon and thawed salmon down to -4C. Electrical requirements – 400 V / 50 hz / 3 phase. Power consumption – 3.45 kW. Overall dimensions - 2300mm long x 1550mm wide x 1800mm high. Weight – 1,000 kg (approx.). Condition – Very good - last used for production in summer 2025. Supplied with User Manual and spare knives.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: PA12704, 110610702, PA12707, mobility: mobile, Badeer Fish Grading Machine – full documentation available in both Polish and English. The onboard computer operates on the MES - B'Logic software platform. It includes two modules: B'Logic Grading and a label design software B'Logic. The set includes: - CAB label printer - Feed hopper - Acceleration conveyor - Weighing machine - Sorting conveyor - PC computer The computer located next to the label printer at the machine is touchscreen. The main computer for setting product specifications (for the currently processed product) does not need to be positioned near the machine. Specification: - 100–120 fish per minute - Maximum fish size: Length – 350 mm, Width – 220 mm - Operating speed adjustable by user (as shown in the video) - Airborne noise: < 70 dB Machine dimensions: Grading section: Height: 1.3 m, Length: 4.417 m, Width: 1.050 m Conveyor belt width: 60.8 cm (S 800 seamless belt) Power consumption: 0.37 kW Hsdpey Hiyaefx Ag Ijnl Steel quality: AISI 304 Motor: Worm gear drive Feed hopper: Height: 1.87 m, Length: 3.66 m, Width: 1.5 m Conveyor belt width: 45.6 cm Drum motor Power consumption: 0.37 kW Dynamic weigher: Belt width: 250/350 mm Product weight: up to 1 kg (possible calibration) Motor power: 0.18 kW Speed: 0.25 mm/s – 2.0 mm/s

Condition: good (used), Compact coating line - batter dip, pre dust, batter enrober, crumber - all 400mm in to 350mm wide fryer. Has come from a small factory which was set up in 2020 and closed this week 25th March 2026. The factory was producing small products like pasta and chillies filled with cream cheese which was then coated and fried. Video to be added shortly. All other machinery also available including Vemag multi head filler and several blast freezers. Hsdpfeyxfmyox Ag Isnl

Condition: as good as new (ex-display), Year of construction: 2021, Direct from closed meat-free factory which opened in 2021. All machinery in near new condition and from 2021 and 2022. Very low running hours. Can be sold as whole line. Priced for end users only. New cost from GEA £1.66M Hnodpoyvav Nefx Ag Iol

Condition: like new (used), This heading machine consists of an automatic feeder that guides the fish head first through vibrating hoppers. The fish continue in a steady flow through the four feeding sections to the heading section. The head remover cuts off the head and simultaneously removes the backbone from the bodies of pelagic fish. Species handling capabilities include anchovies, sardines, and similar species. Pelagic processing: - High-speed pelagic processing systems, from reception to packaging and palletizing. - Optimizes performance, productivity and product quality. - Superior production flow, freezing capacity and software monitoring. - Maximum fish range: 200 mm (length) x 30 mm (width). Hsdpfx Aoyuffyog Ijnl Production may vary depending on the type of fish and its range.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: SBL 300, We offer this new Marel Speed batcher fish processing machine, SBL 300 fish , year of construction 2021. Hjdpfx Agsyt H Efj Ionl Manufacturer: Marel Model: Speed batcher pakkestasjon SBL 300 Year of construction: 2021 Condition: new Category ID: 306 Type ID: 2242 Machine type: fish processing machine If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2020, operating hours: 829 h, Baader 588 Filleting Machine 2020, low hours, with spares Complete with IS026 Header Baader 61 knife sharpener 6 station trimming Line Infeeds/outfeeds, various conveyors Compressor Rare package! Hjdpfx Aeyq Sbyjg Isnl

Condition: refurbished (used), functionality: fully functional, Uni-Food-Technik A/S Type V-1558 skinning machine double lane. Skinning options range from silver skinning and traditional skinning to deep skinning of fillets, pre and post rigor. Capacity up to 50 fillets / hour. Hjdpfxoyk U Aae Ag Ienl

Condition: good (used), functionality: fully functional, Schröter 2-trolley smoke, cooking, and drying systems, gas-heated Each unit suitable for 2 standard trolleys 1x1x2 meters Hodpfx Ajykl N Reg Ionl With gas burner With cooling coil With smoke generator With control system Wiring diagrams available. There are 2 units, fully dismantled and dry stored.

Condition: used, 6m frying length, 600mm wide, top hold down belt and teflon infeed. Hnsdpsyivunjfx Ag Iol

Condition: good (used), Trio FDS3000 skinner for up to 150 cod fillets a minute. 460mm wide conveyor. Hjdpeyivryofx Ag Ijnl

Condition: used, Suhner Needle Injector Model: S120F- 45 With filter Ex fish factory, last used on salmon Hsdpfxsygxrde Ag Ijnl

Condition: excellent (used), GEA Westfalia separator for dewatering industrial and municipal waste water sludge. In excellent condition. Hnsdpfxsyf Hw So Ag Iel

Condition: refurbished (used), Baader 185 Fish Filleting Machine Hnjdpfx Ageyfhx Rj Iel With Baader 51 skinner attached Overhauled in 2022 and little use since Last used on Cod. Lots of pictures and videos available on request

Condition: good (used), Year of construction: 2011, Fish Skinning Machine Make: Nock Model: TFE350 2011 Refrigerated drum, with built in compressor Hnodeycklzjpfx Ag Ijl With various spares

Condition: excellent (used), Year of construction: 2006, Fish Filleting Machine Make: Pisces Model: FR200 2006 Complete with Pisces Heading machine and conveyor Hedpfx Aox Uz Hueg Isnl Removed in good working condition. Videos available.

Condition: used, overall dimensions 2135x1275x2270 mm; power supply 400 V, 50 Hz; power 8.0 kW; air supply 6 bar; 320 needles Ø1,6 mm; injection speed 20-70 punctures/min; conveyor 350 mm wide; clearance height 100 mm; product height 70 mm; Hnsdpfsx Tgdpsx Ag Isl weight 700 kg.

Condition: excellent (used), Year of construction: 2012, Carnietch / Marel Pinbone Remover Model: 2612 2012 Hodpsx H Td Asfx Ag Ijnl Single lane, Very good ocndition

Condition: excellent (used), 600mm batter enrober. Can be supplied as part of complete coating line. Hnodpfx Agex Hbfuj Iol

Condition: excellent (used), Marel stainless steel 350 bandsaw in lovely condition. Perfect for factories cutting meat, fish blocks etc. Direct from closed UK fish company. Hnedpjx Av R Iefx Ag Isl

Condition: excellent (used), SAIREM TMW 35 defrosting tunnel, year of manufacture 2016 Hjdpfx Agexy Nhbj Isnl

Condition: excellent (used), Year of construction: 1991, Drum 3 mm, plastic Hsdpjxx T Nyjfx Ag Isnl Full service done. New belt added, all seals changed, oils and ball bearings. New pictures will be available on May 10th. Repair pictures will be sent upon request.

Condition: refurbished (used), Year of construction: 2012, Arenco CIS Nobbing Machine. Refurbished. Ready to use. Fully maintained. When the machine was acquired, there was no documentation with it. The machine comes with 10 knives in total, all 2: 1) 130x17x2.5 8B40R 2) 130x17x2.5 8BR40L 3) 130x17x2.5 SB 4) 130x38x2.5 SB 5) 150x25x1.5 SB Hnedpfexx T Ivsx Ag Iel Everything that remains above the belt has been maintained. The gearbox has not been touched. The machine is in full working order. The price is non-negotiable. Located in Rae Vald, Harjumaa, Estonia. Will be VAT-free if exported outside of the country.

Condition: excellent (used), Automatic poultry and fish skinner The ST600 automatic poultry and fish skinner is designed to deliver high yields and can handle very fine, delicate or rough work. Product is handled very gently and will prevent split tails and damages on the in-or outside of the fillets. This enables the machine to endure high speed throughput. STEEN ST600 technical specifications: Manufacturer: STEEN Model/Type: ST600 Series: 2G8/1709B Power supply: 380 V, 50 Hz Power: 2200 W Current consumption: 5.8 A Machine dimensions: L: 310 cm x W: 80 cm x H: 150 cm Advantages of the STEEN ST600 skinning machine: Hnjdpfoxuqktox Ag Isl High precision skinning with minimal product loss. Robust stainless steel construction – durability and easy hygiene maintenance. Energy-efficient 2.2 kW motor for stable operation. Simple operation and quick cleaning, tailored to the requirements of processing plants. The STEEN ST600 skinning machine is the ideal solution for meat, fish, and poultry processing plants that need a reliable device for effective skinning.

Condition: ready for operation (used), Skinning machine. Manufacturer - Baader. Model - 51. Capacity - 50-160 fillets/min, depending on size. Infeed belt length - 91 cm. Infeed belt width - 38 cm. Outfeed belt length - 65 cm. Power consumption - 1.5 kW. Water consumption - 15 L/min at 4 bar. Overall dimensions - 200x78x113 cm, weight - 300 kg. New roller and knife included. STRAND.25. Hnedpfjxugu Uox Ag Iol