Reichert Möbelwerkstätte GmbH

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B/BP, used machine Manufacturer: Tool-Temp Type: TT 138 B/BP Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Podpfx Amozqbmdsyegp Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: used, TORNOS Micro 8 is a CNC automatic lathe engineered for high-precision machining with strong accuracy and reliability. Working capacities: 5 axes, workpiece length max 20 mm, max bar diameter 10 mm; collet tapers W15 (spindle) and F13 (back spindle). Key specs: stepless spindle 0–12000 t/min; rapid traverse X 20 m/min, Y 40 m/min, Z 20 m/min; spindle/back-spindle motors 2.2/3.7 kW; 3x400 V 50 Hz; total power 8 kVA; weight ~1600 kg; dimensions 1670×870×1650 mm. Equipment: LNS TRYTON 112 bar feeder, lamp, coolant system, oil mist extractor, RS232 interface, status light. Delivers tight tolerances; suited to automotive, watchmaking, machine tools, aerospace and medical sectors. Psdpfxozqbl Ts Amyjgp

Condition: used, Pump, Wilo IL80/190-18.5/2; 18.5 kW; Used machine Manufacturer: Wilo Type: IL80/190-18.5/2 Psdpfxezqbl Ho Amyogp Overall dimensions: Width: 510 mm Depth: 350 mm Height: 960 mm Weight: 100 kg Electrical data: 400V; 31.4A; 18.5 kW Flow rate capacity: up to approx. 2,499 l/min (≈150 m³/h). Maximum delivery head: approx. 48.5 m. Fluid temperature range: −20 °C to +140 °C.

Condition: excellent (used), MATSUURA H. PLUS 300 is a Horizontal machining center with high precision, excellent accuracy and reliability. Travels X/Y/Z 500 mm; workpieces Ø 530 mm, h 700 mm; pallets 300×300 mm (10), max workpiece 250 kg, change 7 s. Spindle BT40 50–15,000 rpm, 95.4 Nm, 15/22 kW; feeds 1–50,000 mm/min, rapid 50 m/min; 3×380 V 50 Hz; weight ≈7000 kg; dims 3660×2463×2445 mm. Tool magazine 90 pos., tool change 2 s, chip-to-chip 2.9 s. Coolant 1500 l, chip conveyor, toolholder set, spindle oil cooler. Suited to tight tolerances in automotive, aerospace, medical, watchmaking and mould/die. Pgodozqblyjpfx Amyop

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 500 mm Saw blade speed: 2,800 min⁻¹ Feed length per cycle: 5,600 mm Cutting angle: 90° Miter function: Depending on the machine configuration (?) Suitable materials: Aluminum profiles, thin-walled aluminum profiles, window and door profiles MACHINE DETAILS Pgedpfx Amozqbltsyep Manufacturer: Elumatec Model: SA 142/25 Machine type: Automatic aluminum saw Year of manufacture: 1997 Power supply: 230/400 V, 3~, 50 Hz Compressed air connection: 7 bar EQUIPMENT Chip extraction

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw type: Double miter saw Suitable materials: Aluminum and PVC profiles Saw blade diameter: approx. 350 mm (300–400 mm) Saw angle: 90° and 45° Cutting length: approx. 3–4 m (?) Clamping system: Pneumatic horizontal clamping vises Motor power per head: approx. 1.5–2.2 kW Spindle speed: approx. 3,000 min⁻¹ MACHINE DETAILS Manufacturer: Emmegi Pjdpozqblaefx Amyjgp Model: TU/4 Year of manufacture: 1995 Connection voltage: 400 V Compressed air requirement: 6–8 bar (?) Weight: approx. 500–600 kg Machine condition: Functional and ready for immediate use.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 7,000 mm Travel range Y-axis: 300 mm Travel range Z-axis: 350 mm Spindle power: 5.5 kW Spindle speed: 18,000 rpm Tool holder: ISO 30 Tool positions: 2 magazines, each with 5 + 1 tool positions Machining capabilities: Five-sided machining with angled heads Maximum profile length: 7,000 mm Operating pressure: 6–8 bar (?) MACHINE DETAILS Manufacturer: Emmegi Model: Phantomatic T5 Podszqbk Aopfx Amyjgp Machine type: CNC profile machining center Year of manufacture: 2007 Control system: CNC control, 3 axes Number of clamping systems: 8 Machine weight: approx. 3,200 kg EQUIPMENT Automatic positioning of clamping jaws Automatic positioning of clamping systems Dual-zone machining / shuttle operation Two tool magazines for both work areas Sawing, drilling, and milling in a single setup Angled heads for five-sided machining

Year of construction: 2018, condition: good (used), ASYS TDM 06 * Year of manufacture: 2018 * Dimensions (L × W × H): 1,590 × 1,000 × 950 mm * Transport height: 850 mm * Overall height including signal light: 2,050 mm * Weight: 235 kg * Passageway width: 790 mm * PCB size: 70–460 × 50–460 mm * PCB thickness: 0.8–4.5 mm * PCB weight: 0–3 kg Pgjdpfjzqbkvjx Amyep * Maximum component height: ±40 mm * Power connection: 230 V / 50 Hz * Pneumatics: 6 bar supply pressure, 5 bar working pressure, oil-free compressed air * Sound pressure level: < 75 dB(A) * Complete documentation available

Condition: used, OKUMA MAC TURN 350-W is a CNC Lathe-Milling Center, engineered for precision, high accuracy and reliability. Capacities: turning Ø 530 mm (over cross-slide), 550 mm (over bed); spindle hole 62 mm; turning length 1625 mm; Z 1670 mm, X 505 mm, Y ±95 mm (190 mm). Specs: 9 axes; C axis 360° res. 0.001°; B axis swivel 210° res. 1°; spindle speeds up to 5000 t/min (main and back spindle); milling cutter speeds 6000 t/min; spindle motor 22/15 kW. Equipment: 44-station tool changer, chip conveyor. Delivers tight tolerances; ideal for automotive, aerospace, medical and precision manufacturing. Psdpfxszqbkpo Amyogp

Year of construction: 2023, condition: ready for operation (used), overall weight: 980 kg, Optical measurement machine manufactured in 2023. This VISCOM S3016 features a maximum PCB dimension capacity of up to 430 mm x 610 mm and includes an uninterruptible power supply. It is equipped with 4 orthogonal cameras and offers high-resolution inspection capabilities. If you are looking to get high-quality inspection capabilities, consider the VISCOM S3016 optical measurement machine we have for sale. Contact us for further details. Pgsdpfx Amszqbkijysp - System Function: Individual inspection from below with automatic track width adjustment; well-suited for inspecting THT solder joints- Max. PCB Dimensions: Up to L 430 mm x W 610 mm- System Computer: MS Windows operating system (presumably Windows 10)- Power Supply / UPS: Uninterruptible power supply included- Software: SI inspection software- Sensor Specifications: 8M-4SRW- Inspection Dimensions: 2D resolution- Camera Configuration: 4 orthogonal cameras- Illumination: Red illumination- Resolution (Standard Mode): 23.4 µm/pixel- Resolution (High-Resolution): 11 µm/pixel- Hardware Extensions: Traffic light extension to 2,500- Power Consumption: 2500 W- Supply Voltage: Y400V 3P/N/PE AC, 50 Hz- Control Voltage: 24 V- Pneumatic Operating Pressure (P/min-max): 4 - 6 bar- Sound Level: < 70 dBA

Condition: used, BEYELER PR 6 1000 KN x 2050 MM is a Bending center engineered for precision, high accuracy and reliability. Working capacities: workspace 2050 mm, shearing/pressing force 1000 kN, number of axis total 6, lifting height 415 mm. Technical specifications: air connect max. 8 bar, voltage 50 Hz 3x 400 Volt, total installed power 7.5 kW, machine's weight about 8’000 kg. Enables achievement of tight tolerances; typical application sectors: automotive, aerospace, medical, machine tools, watchmaking Pgedpfx Amszqbi Ejyop

Condition: like new (used), Year of construction: 2010, machine/vehicle number: IntNr231643, LTA AC 3001 _E120 Infinitely variable fan speed control (0-10V in the 230V version) · Low energy consumption thanks to filter elements with minimal pressure loss and energy-efficient fans · Filtration stages for the separation of coolant mist · Mechanical solid particle filter · Suitable for use with oil/emulsion mist · High-voltage generator with two pre-programmed voltage levels · Direct mounting on the machine is possible · Separation efficiency of up to 99% Pgsdpfozqbixjx Amysp - Dimensions (L x W x H): 1130x625x610 mm - Weight: 135 kg Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, HAHN + KOLB ZL 800 is a lapping / fine grinding machine engineered for precision, high accuracy and reliable operation. Capacities: max wheel Ø 810 mm, max workpiece length 250 mm, carrier root Ø 306 mm; upper and lower wheels 4 steps, 30 t/min–84 t/min. Main specs: main motor 3.0/4.0 kW, total power 11 kW, machine weight approx. 3500 kg, footprint L1720×W2100×H2100 mm. Accessories: set of grinding wheels, coolant system. Delivers tight tolerances; typical applications include automotive, watchmaking, machine tools, aerospace and medical. Pgedpfx Amszqbh Ujyep

Condition: used, BIGLIA B 470/YSM is a CNC turning lathe engineered for precision machining, delivering high accuracy and reliable performance. Capacities: turning diameter 210 mm, bar diameter 65 mm, turning length 300 mm, Y axis 110 mm; two turret slides (2) with 12 positions each and 12 driven tools per turret. Key specifications: max speed 4000 t/min; power of back spindle 11 kW; spindle motor 26 kW; voltage 50 Hz 3x 400 Volt; machine weight about 6150 kg; time under power 74536 Heures, operating time 24651 Heures, working time 8588 Heures. Accessories: bar feeder LNS HYDROBAR SPRINT. Capable of achieving tight tolerances; suitable for automotive, aerospace, medical, watchmaking and machine tool industries Pgedpozqbh Isfx Amyep

Condition: used, ROSA LINEA IRON 11.6 is a CNC surface grinder engineered for precision, high accuracy and reliable performance. Capacities: table 1100×500 mm; travels X 1350 mm, Z 650 mm; table load max 1100 kg; grinding length 1200 mm; width 650 mm; wheel Ø400×100 mm, bore 127 mm. Specs: wheel speed fixed 1500 t/min; table speed 1–40 m/min; automatic cross feed stepless 1–3 m/min; voltage 3x400 V 50 Hz; machine weight ≈6400 kg; dimensions 5500×2490×2600 mm. Accessories: coolant system, paper filtration, magnetic plate 1100×500 mm, grinding wheel with flange. Delivers tight tolerances; suited to automotive, aerospace, toolmaking, medical and watchmaking. Pedpfszqbhzox Amyogp

Condition: used, WILLEMIN MACODEL 508S2 is a vertical machining center delivering high precision, accuracy and reliability. Working capacities: 6 axes; rotary table Ø180 mm, table load max 15 kg; travels X400 Y200 Z385 mm; B -100/+30°; resolution 0.0001. Main specs: spindle HSK E40 50–42000 rpm; spindle power 10/15 kW; torque 8/12 Nm; rapid traverse 60 m/min; acceleration 10 m/s²; air 6 bar; supply 3×400V 50Hz; total power 35 kVA; weight ≈5000 kg. Equipment: BLUM 3D Z‑MT tool setter, Renishaw OMP400 probe, Donaldson oil‑mist extractor, Turbo Separator filter, automatic central lubrication. Achieves tight tolerances for automotive, watchmaking, aerospace, medical and machine‑tool sectors. Podpfx Ajzqbhujmyjgp

Condition: used, Year of construction: 2024, operating hours: 25 h, Caterpillar engine (kW/HP): 340 / 460 Discharge height: 2,898 mm (tracked version) Discharge height: 1,830–4,151 mm (at 35°) Shredding unit: • Screen basket: 250 mm (other sizes available, including 80 / 100 / 125 / 150 / 180 / 250 / 300 mm) Pgedszqbhnspfx Amysp • Roller speed (min⁻¹): – Hydraulic drive, max. 32 • Roller length: 2,820 mm • Roller diameter: 610 mm Throughput, depending on the material: up to approx. 60 t/h Weight: approx. 25.7 t Transport dimensions – L × W × H (mm): 6,940 × 2,854 × 3,268 (tracked version) Working position L × W × H (mm): (conveyor belt 35°): approx. 11,372 × 3,290 × 4,151 Further features: Slow-speed, 2-shaft shredder for wood and green waste Very well suited for green waste, tree stumps, and all types of wood waste, as well as old wood Optional screen baskets available upon request: 80 mm round, 100, 125, 150, 180, or 250 mm (among others)

Condition: used, Belt Conveyor, Conveyor Belt, Industrial Belt Conveyor, 2.1 m, Used Machine Overall Dimensions Width: 2140 mm Depth: 380 mm Height: 150 mm Technical Specifications Pedezqbhhepfx Amyegp Power Supply: 400 V, Three-phase Motor Power: 0.12 kW Rated Current: 0.51 A Belt Dimensions: 2100 × 150 mm Belt Speed: 4.38 m/min Cleat Dimensions: 25 × 150 mm Cleat Spacing: 100 mm

Condition: used, WILLEMIN MACODEL 408S2 is a Machining and turning center from bar with high precision, superior accuracy and reliability. Travels X 250 mm, Y 200 mm, Z 310 mm; B axis -100°/+30°; resolution 0.0001; bar capacity Ø32 mm; tool magazine 24 positions; tool length 95 mm, max weight 1 kg; tool change 0.8 s; Ø with free adjacent pockets 80 mm. Spindle nose HSK E-25, stepless up to 75'000 t/min; voltage 50 Hz 3x400 V; total power 16 kVA; machine weight ~2300 kg; footprint L1840 x W2450 x H1385 mm. Equipment: Renishaw OMP 40-2 touch probe, BLUM Nano NT tool break control, coolant system, oil mist extractor, coolant filter, fire extinguishing system. Delivers tight tolerances; ideal for watchmaking, medical, aerospace, automotive and tooling. Pgedpozqbhbsfx Amyop

Condition: used, SCHAUBLIN 202 TG-CNC W25-0127 is a CNC turning, milling and grinding centre engineered for precision, high accuracy and reliability. Capacities: 3 axes, centre height 60 mm, travels Z 300 mm, X 150 mm, collet bore 19 mm (W25), resolution 0.0001 mm, C‑axis 0.0001°. Specs: spindle up to 7000 rpm, power 5/6 kW, max torque 26.1/35.1 Nm, rapid traverse 20 m/min, supply 3×400 V 50 Hz, weight ≈3000 kg, overall 1930×1300×2040 mm. Accessories: coolant, Ethernet, chip conveyor, parts catcher, loader LNS Express 112+, rinsing guns, fire extinguishing system. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Pedpfxezqbg Ro Amysgp

Condition: refurbished (used), Year of construction: 2007, VIDEOS AVAILABLE ON REQUEST UNION CBFK 130/2 CNC Table Type Horizontal Boring & Milling Machine Manufacturer: UNION Gera (VEB Werkzeugmaschinenfabrik UNION Gera) Model: CBFK 130/2 Control: Heidenhain CNC Machine type: CNC Table Type Horizontal Boring & Milling Machine Travels X-axis: 3,000 mm Y-axis: 1,600 mm Z-axis: 1,275 mm W-axis (spindle quill): 400 mm B-axis (rotary table): 360° Table Table size: 1,600 × 2,000 mm Maximum workpiece weight: 7,000 kg Main Drive Main spindle motor: 32.4 kW Electrical Data Connected load: 80 kW Supply voltage: 380 V Frequency: 50 Hz Control voltage: 220/24 V Podpezqbg Dsfx Amyegp Auxiliary voltage: 220/15 V Rated machine current: 150 A Recommended fuse: 200 A Operating temperature: 15–35 °C Machine Weight Approximate machine weight: 28.3 tonnes Year Originally manufactured: (not shown on plate) General overhaul: 2007 Machine Identification Model: CBFK 130/2 Serial number: 12266 Operating Hours (Heidenhain) Control ON: 112,694 h Machine ON: 100,869 h Program running time: 22,209 h Spindle running time: 18,280 h

Condition: used, mileage: 1,198,353 km, power: 397 kW (539.77 HP), first registration: 05/2009, fuel type: diesel, tire size: 385/65R22.5, tire condition: 40 %, axle configuration: 8x4, wheelbase: 4,100 mm, fuel: diesel, fuel tank capacity: 450 l, brakes: retarder, color: blue, gearing type: automatic, number of gears: 16, emission class: euro5, suspension: other, total length: 7,600 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2009, Equipment: ABS, air conditioning, cruise control, fridge, parking heater, retarder, = Additional Options and Accessories = - Radio/CD Pgodpfx Amszqbgweyop = Additional Information = General Information Cab: XXL Technical Information Number of Cylinders: 6 Axle Configuration Tire Size: 385/65R22.5 Front Axle: Tire Tread: 40%; Reduction: External planetary axles; Suspension: Parabolic spring suspension Rear Axle 1: Tire Tread: 30%; Reduction: External planetary axles; Suspension: Air suspension Rear Axle 2: Tire Tread: 20%; Reduction: External planetary axles; Suspension: Air suspension Rear Axle 3: Tire Tread: 30%; Reduction: External planetary axles; Suspension: Air suspension Weights Unladen Weight: 12,040 kg Payload: 28,960 kg GVW: 41,000 kg Layout Number of Sleeping Berths: 2 Condition Damage: None = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - E-Mail: - Website:

Condition: good (used), loading space length: 2,990 mm, loading space width: 2,440 mm, loading space height: 2,800 mm, Year of construction: 2011, Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Manufacturer: Unknown Model: Office container Year of build: 2011 Condition: Used Podszqbf Hepfx Amyjgp Data: Dimensions LxWxH: 2989x2435x2800 mm Colour: red Transport Points in accordance with ISO Standard: in the corners, forklift pockets present Stackable: 3-times Drainage of rainwater: Via circumferential drainage gutters in the frame, with downpipes in the corner posts Windows: white PVC-windows Powerinstallation: 2x double sockets Lighting (2x16W): 1x lamp Weight: 1.350 kg Special features: E-heating Information: Used, damaged, dents on the outer walls. Location: 41468 Neuss immediately available

Condition: refurbished (used), Year of construction: 2009, machine/vehicle number: R-00649, load capacity: 165 kg, arm reach: 2,655 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C302#EGN, FANUC R-2000iB/165F manufactured in 2009.05. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/165F Model Number: A05B-1329-B201 Year of Manufacture Robot: 2009.05 Warranty term (months): 12   Payload (kg): 165 Reach (mm): 2655 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1170   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2009.05 RCC Length (m): 14   Teach Pendant: A05B-2518-C302#EGN Podpfx Amozqbftjysgp Teach Pendant Cable Length (m): 10  

Condition: good (used), Year of construction: 2017, Equipment: documentation/manual, * Dimensions (L × W × H): 1,000 × 1,038 × 950 mm * Transport height: 950 mm * Overall height including signal light: 2,050 mm Pedpfx Aozqbfmomysgp * Conveyor segment: 1 × 1,000 mm * PCB size: 100–430 × 50–350 mm * PCB edge distance: 3 mm * Interface: SMEMA * Power connection: 230 V / 50 Hz * Pneumatics: 5 bar, air consumption 3–8 l/min * Electrically adjustable width via stepper motor