MSW Maschinenservice GmbH

Condition: ready for operation (used), Year of construction: 2012, Main Drive Spindle speed range 12000 Tool taper HSK-A 50 Number of axis 3 Max payload Up to 5 kg Movement X-Axis Movement 550 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 320 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 360 mm Z-Axis Rapid Traverse 60 m/min Table Table load 500 kg Tools Max weight 5 kg The system consists of: 2 x CHIRON FZ 12 KW (2012) + 2 x Fanuc LR Mate 200iC (2011) + 2 x Fanuc M - 20iA (2011) + Waschstraße. It features a high-speed spindle with a maximum speed of 12,000 rpm and a rapid traverse speed of up to 60 m/min on the Z-axis. Each machine includes a 24-slot automatic tool changer and can handle a table load of up to 500 kg. Ideal for precision machining tasks. Contact us for more information about this machine. Gedpfxox Hlidj Ag Djca Application Types Milling

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 15,000 mm, controller manufacturer: FANUC, controller model: SERIES 16i-M, workpiece weight (max.): 250 kg, total height: 2,300 mm, total length: 2,100 mm, total width: 2,200 mm, table width: 400 mm, table length: 650 mm, overall weight: 2,200 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 14, mount diameter: 30 mm, tool length: 200 mm, tool diameter: 80 mm, STAMA MC 014 CNC Vertical Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 17 A - Overhang: 380 mm - Table to spindle nose: 150 - 480 mm - Table including 3 T-slots - Spindle bearing diameter: 50 mm - Note: without clamping devices and tool holders shown in the photos Note: the item must be collected on a binding date between 04. and 12.03.2026, to be agreed. FCA D-75181 Pforzheim – loaded onto truck Gcsdpfxsx E T Nco Ag Dja

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, feed length X-axis: 15,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 15,000 mm, controller manufacturer: FANUC, controller model: SERIES 16i-M, workpiece weight (max.): 250 kg, total height: 2,300 mm, total length: 2,100 mm, total width: 2,200 mm, table width: 400 mm, table length: 650 mm, overall weight: 2,200 kg, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 14, mount diameter: 30 mm, tool length: 200 mm, tool diameter: 80 mm, STAMA MC 014 CNC Vertical Machining Center - Operating voltage: 400 V Godpfox E Tz Eex Ag Djca - Frequency: 50 Hz - Rated current: 17 A - Overhang: 380 mm - Table to spindle nose: 150 - 480 mm - Table with 3 T-slots - Spindle bearing diameter: 50 mm - Note: Without the clamping devices and tool holders shown in the photos Attention: The item must be collected firmly between 04 and 12.03.2026 on a date to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2017, operating hours: 35,000 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller model: SIEMENS 840 D Solution Line, number of spindles: 2, number of slots in tool magazine: 32, Equipment: chip conveyor, rotational speed infinitely variable, - Twin-spindle machining centre - 5 axes Gedpfsx E Sr Nex Ag Doca - Automatic tool changer with 2x 16 tool positions Further details available on request.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 4,835 h, functionality: fully functional, machine/vehicle number: Ser. Nr. 111162, workpiece weight (max.): 100 kg, travel distance X-axis: 410 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 170 mm, workpiece height (max.): 170 mm, workpiece width (max.): 350 mm, workpiece length (max.): 580 mm, overall weight: 1,350 kg, input voltage: 380 V, Equipment: documentation/manual, This 5-axis wire EDM machine Brother HS-50A was built in November 1999 and has been in operation since 2000. The low operating hours of only 4,835 h are due to the fact that the machine has only ever run in single-shift operation. 90% of its use has been for eroding holes in 12 mm cutting plates. The machine has undergone all scheduled servicing and, apart from regular wear parts, has never required any major repairs. The machine will remain in use until week 51/2025 and can be inspected on site by arrangement. Videos of the machine in operation are available upon request. Godjx E R Hfopfx Ag Djca

Condition: good (used), Year of construction: 2003, For sale Fehlmann Picomax 60 M Machining Centre Year 2003 Specification Machine type: Vertical CNC machining centre, 3 axes (expandable to 5) CNC control: Heidenhain iTNC 530 Travel: X axis (longitudinal): 505 mm Y axis (transversal): 355 mm Z axis (vertical): 610 mm Table size: 920 mm x 380 mm Max spindle speed: 18,000 rpm or 20,000 rpm Spindle taper: SK 30 (or ISO 30) Tool magazine: 24 positions Machine weight: Approx. 3,200 kg Gcedox E R Dkopfx Ag Doa BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: ready for operation (used), Year of construction: 2005, Control Unit Brand HEIDENHAIN Model iTNC 530 General Data Machine weight 3600 kg Main Drive Spindle speed range 20 - 10000 RPM Spindle motor power 9 / 13 kW Tool taper SK 40 Number of axis 5 Movement X-Axis Movement 500 mm Y-Axis Movement 450 mm Z-Axis Movement 400 mm Additional Equipment Tool Positions: 16 / Max. Tool Weight: 6 kg / Max. Tool Length: 300 mm Max. Tool Diameter: Without adjacent tools: 130 mm / With adjacent tools: 80 mm Total Power Requirement: 17 kVA No chip conveyor included / No automatic measuring probe included / No tools included This 5-axis DMG DECKEL MAHO DMU 50 vertical machining centre was manufactured in 2005. It features a Heidenhain iTNC 530 control, a main spindle speed range of 20 - 10,000 RPM, and a rotary table with a clamping surface of 630 x 500 mm. The machine has undergone significant overhauls, including a complete X-Axis bearing replacement and new coolant pump installation. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 machine we have for sale. Contact us for more information. Application Types Milling Gcsdpfox E D U Aex Ag Dea

Condition: like new (used), Year of construction: 2018, operating hours: 502 h, functionality: fully functional, machine/vehicle number: 1154161, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 394 mm, rapid traverse X-axis: 61 m/min, rapid traverse Y-axis: 61 m/min, rapid traverse Z-axis: 61 m/min, feed length X-axis: 508 mm, feed length Y-axis: 406 mm, feed length Z-axis: 394 mm, feed rate X-axis: 31 m/min, feed rate Y-axis: 31 m/min, feed rate Z-axis: 31 m/min, nominal power (apparent): 20 kVA, torque: 46 Nm, controller manufacturer: HAAS, controller model: HAAS NGC (Next Generation Control), workpiece length (max.): 660 mm, workpiece width (max.): 381 mm, workpiece height (max.): 394 mm, workpiece weight (max.): 113 kg, total height: 2,489 mm, total length: 1,626 mm, total width: 2,083 mm, table width: 381 mm, table length: 660 mm, table load: 113 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, overall weight: 2,722 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 502 h, coolant supply: 20 bar, distance table to spindle center: 495 mm, spindle motor power: 11,200 W, number of spindles: 1, number of slots in tool magazine: 21, mount diameter: 30 mm, tool length: 127 mm, tool diameter: 76 mm, tool weight: 1,800 g, input voltage: 400 V, type of input current: three-phase, HAAS DT-1 High-Speed Drilling/Tapping Center - Excellent Condition - Only 502 Spindle Hours Exceptionally well-maintained HAAS DT-1 vertical machining center with very low hours. This compact, high-speed machine is ideal for drilling, tapping, and light milling operations in aluminum, steel, and other materials. Full details are available (including all invoices) through a website build for this machine. Machine History: - Built: August 2018 - 2018-2021: Demo machine at Landré (official HAAS distributor Netherlands) - October 2021: Purchased by IMBU BV - 2021-2025: Used exclusively for prototyping - never production work - December 2025: Full service by Landré (service report available) Condition: Outstanding condition for its age. Only 502 spindle hours and 1,764 power-on hours. The machine has been carefully maintained and used only for prototype development, resulting in minimal wear. Installed Options: - 15,000 RPM spindle (11.2 kW, BT-30) - Through Spindle Coolant (TSC) 20 bar with 25 micron fine filter - Renishaw Wireless Probing System (WIPS-R) for tool and workpiece measurement - 4th axis interface with wiring (ready for rotary table) - 5th axis interface with wiring - High Speed Machining (HSM) - 80 block look-ahead - Dynamic Work Offsets (DWO) & Tool Center Point Control (TCPC) - Programmable coolant nozzle (34 positions) - Automatic chip auger Software Options: Macros, Rotation and Scaling, Rigid Tapping, M19 Spindle Orient, VPS Editing, Media Display, Wireless Networking, Compensation Tables, 1GB Max Memory Technical Specifications: - Travel: X=508mm, Y=406mm, Z=394mm - Rapid traverse: 61 m/min (all axes) - Table size: 660 x 381 mm - Table load: 113 kg - Tool changer: 20+1 side-mount - Spindle nose to table: 102-495 mm - Coolant tank: 208 liters - Machine weight: 2,722 kg - Dimensions (L x W x H): 1626 x 2083 x 2489 mm - Power: 400V 3-phase Machine Data (from controller): - Power-on hours: 1,764 - Spindle hours: 502 - Feed cutting time: 337 hours - Tool changes: 13,803 - Programs completed: 3,896 Included: - Complete machine documentation Gcedpfxox E Au Uj Ag Dsa - All original invoices (machine, tooling, accessories) - Landré service report December 2025 - Renishaw wireless probing system (tool probe + workpiece probe) ALSO INCLUDED: Extensive set BT-30 toolholders (list attached), Ceratizit cutting tools, and Lang Quick-Point clamping system (list attached). Total investment approx. €25,000. Location: Netherlands Reason for sale: Company restructuring All documentation available on website. Inspection welcome by appointment.

Condition: ready for operation (used), Year of construction: 2000, Control Unit Brand FANUC Model 18-M Gcodpfxox Eni Re Ag Dja Main Drive Number of axis 3 Movement X-Axis Movement 560 mm Z-Axis Movement 570 mm Y-Axis Movement 400 mm This 3-axis DAEWOO ACE-V400 vertical machining center was manufactured in 2000. It features a working envelope of XYZ dimensions 560 x 400 x 570 mm and includes a hand wheel. If you are looking to get high-quality milling capabilities, consider the DAEWOO ACE-V400 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Siemens 840 D, 48 tool stations HSK-A 50, spindle speed 15,000 rpm, workpiece changer, Knoll coolant system with internal coolant supply (IKZ), Thermodrive, mineral cast bed, automatic loading doors, central lubrication, extraction system for plastic chips. Gsdex D Up Sepfx Ag Doca

Condition: ready for operation (used), Year of construction: 2014, Main Drive Spindle speed range 21000 Number of axis 4 Movement X-Axis Movement 500 mm Y-Axis Movement 400 mm Gcodpfex D N Ntjx Ag Dsa Z-Axis Movement 330 mm This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document). Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, Main Drive Spindle speed range 15000 Spindle motor power 16 kW Movement X-Axis Movement 450 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Table Outer length 770 mm Gcedpsx D N Nyjfx Ag Dea Outer width 410 mm Tools Slots in storage 24 This SPINNER VC 450 Vertical Machining center was manufactured in the year 2014 in Germany. The machine has a spindle speed of 15000 rpm and a spindle motor power of 16 kW. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, Main Drive Number of axis 3 Godpfjx D N Ucex Ag Deca Movement X-Axis Movement 510 Y-Axis Movement 406 Z-Axis Movement 330 Additional Equipment Number of tool slots: 21 Bracket: BT30 This 3-axis NCT VD-510S was manufactured in 2017 and features a vertical machining centre with X: 510 mm, Y: 406 mm, and Z: 330 mm travel distances. It boasts a high turnover rate of 18,000 and a BT30 bracket, equipped with 21 tool slots. If you are looking to get high-quality milling capabilities, consider the NCT VD-510S machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle speed range 20000 Tool taper HSK A-40 Number of axis 4 Movement X-Axis Movement 550 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 400 mm Y-Axis Rapid Traverse 70 m/min Z-Axis Movement 415 mm Z-Axis Rapid Traverse 70 m/min Gcedpfex D Rdrox Ag Dja This 4-axis Brother TC-32BN QT was manufactured in 2008, featuring a Brother B00 control system, X-axis travel of 550 mm, Y-axis travel of 400 mm, and Z-axis travel of 415 mm. It boasts rapid traverse rates of 70 m/min, a spindle speed up to 20,000 rpm, and a tool magazine with 40 positions. Consider the opportunity to buy this Brother TC-32BN QT vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1999, General Data Measurements height 2860 mm Machine weight 3800 kg Control Unit Brand MITSUBISHI Main Drive Spindle speed range 12000 rpm Spindle motor power 7.5/5.5 kW Tool taper 7/24, No. 40 Movement X-Axis Movement 510 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Table Number of tslots 5 Table load 350 kg Tools Number of index 25 Max weight 6 kg Max tool diameter 100 mm Max tool length 250 mm Media Power consumption 22.5 kVA Additional Equipment APC (Automatic Pallet Changer) - Only for CV-500A (APC): Number of Pallets: 2 Pallet Change Method: Front rotation Gcodpfx Ajx D D Eveg Dea This 3-axis MORI SEIKI CV-500 was manufactured in 1999. Ideal for precision CNC milling, this machine maintains robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI CV-500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1994, Control Unit Brand FANUC Godpjx D Nq Rjfx Ag Dsca Model Series 16-M Movement X-Axis Movement 400 Y-Axis Movement 300 Z-Axis Movement 300 This 3-axis FANUC Robodrill Alpha-T10A was manufactured in 1994. It features a FANUC Series 16-M CNC, a table size of 650x400 mm, and can handle a maximum part weight of 200 kg. It has 10 tool pockets, enhancing its versatility for various machining tasks. Consider the opportunity to buy this FANUC Robodrill Alpha-T10A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, General Data Measurements width 2665 mm Measurements depth 3065 mm Measurements height 2840 mm Machine weight 5600 kg Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 20 – 12000 Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm Table Table load 600 kg Tools Max weight 8 kg Max tool diameter 80 mm Max tool length 300 mm Type of tool holder SK40 Media Godpfx Asx D Nigeg Deca Power consumption 20 kVA Additional Equipment Job Shop package Renishaw PP40 wireless workpiece probe TS27R tool measurement probe Scraper-type chip conveyor Coolant tank capacity: 200 L (left side) Coolant pump: 20 bar internal through-spindle coolant Machine enclosure roof LED work area lighting This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements width 2349 mm Measurements depth 1640 mm Measurements height 2600 mm Machine weight 2300 kg Movement X-Axis Movement 500 Y-Axis Movement 300 Gcsdpfex D Nfbjx Ag Doa Z-Axis Movement 300 This 3-axis Hyundai SPT-V30TD was manufactured in 2001. It features a spindle speed of 8,000 rpm, table dimensions of 600 x 380 mm, and a maximum table load of 200 kg. Ideal for milling applications, it offers X, Y, and Z travels of 500 mm, 300 mm, and 300 mm respectively. Consider the opportunity to buy this Hyundai SPT-V30TD vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2015, Control Unit Brand HAAS Gcedex D I Dijpfx Ag Dja Main Drive Spindle speed range 15000 Tool taper ISO 40 Number of axis 5 Movement X-Axis Movement 508 mm Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 5-axis HAAS DM-1 vertical machining center was manufactured in 2015. It features a spindle speed of 15,000 rpm, a spindle drive of 11.2 kW, and a tool magazine with 18+1 tools. The rapid traverse rate is 61 m/min, enhancing productivity. If you are looking to get high-quality milling capabilities, consider the HAAS DM-1 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, Main Drive Spindle speed range 10000 Tool taper CT/BT40 Number of axis 3 Movement X-Axis Movement 406 mm Y-Axis Movement 300 mm Z-Axis Movement 250 mm Gedpfx Agox D Ifgs Djca Table Table load 227 kg This 3-axis HAAS MiniMill HE was manufactured in 2007. It features a spindle speed of 10,000 rpm, a CT/BT40 taper, and a side-mount tool changer with 30+1 positions. The table measures 914 × 305 mm and supports a maximum load of approximately 227 kg. If you are looking to get high-quality milling capabilities, consider the HAAS MiniMill HE machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2019, operating hours: 40 h, Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 10–5000 Number of axis 3 Movement X-Axis Movement 450 mm Y-Axis Movement 350 mm Z-Axis Movement 400 mm Tools Type of tool holder SK40 This 3-axis EMCO Emcomat FB-450 MC was manufactured in 2019. It features a travel range of X450/Y350/Z400 mm, a fixed angle table of 800x400 mm, and a table load capacity of 450 kg. The spindle speed reaches up to 5000 rpm, complemented by a rapid traverse of 5000 mm/min. Includes a Sinumerik 828D interface with multi-touch display and a comprehensive 3-axis control package. If you are looking to get high-quality milling capabilities consider the EMCO Emcomat FB-450 MC machine we have for sale. Contact us for more information. Gsdpex D Havsfx Ag Deca Application Types Milling

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 2270 mm Measurements depth 1910 mm Measurements height 2540 mm Machine weight 3000 kg Main Drive Gcedpjx D Haiofx Ag Doa Number of spindles 1 Spindle speed range 12000 Spindle motor power 9.5 kW Number of axis 4 Movement X-Axis Movement 500 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Table Outer length 908 mm Outer width 480 mm Tools Slots in storage 20 Type of tool holder ISO/SK 30 This FEHLMANN PICOMAX 56 TOP Vertical Machine Center was made in the year 2013 in Switzerland. It is equipped with a Heidenhain TNC 620 control unit and has 3 axis. The machine has a spindle speed of 12000 rpm and is in good condition, with low hours. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand HEIDENHAIN Model TNC 310 General Data Measurements width 2580 mm Measurements depth 2210 mm Measurements height 1910 mm Machine weight 1910 kg Main Drive Spindle motor power 5.5 kW Movement X-Axis Movement 500 Y-Axis Movement 400 Z-Axis Movement 400 This 3-axis INTOS FNG-40 CNC E was manufactured in 2007. It features a table size of 800 x 400 mm, X/Y/Z travel of 500/400/400 mm, and a spindle taper ISO 40. Equipped with a Heidenhain TNC 310 control system, it includes a workpiece probe, rotary table, and shaping head. If you are looking to get high-quality milling capabilities consider the INTOS FNG-40 CNC E machine we have for sale. Contact us for more information. Gcedpfxsx D E Urs Ag Doa Application Types Milling

Condition: ready for operation (used), Year of construction: 2004, Control Unit Brand SIEMENS Model 840D Main Drive Spindle speed range 20 - 10500 rpm Movement Spindle motor power 5.0 kW Number of axis 3 Gcjdpfsx D Ewgsx Ag Dsa Movement X-Axis Movement 550 mm Y-Axis Movement 300 mm Z-Axis Movement 425 mm Tools Max weight 2.5 kg Max tool diameter 65 mm This 3-axis CHIRON FZ 12 W was manufactured in 2004, featuring a robust AC spindle motor with a speed range of 20 - 10,500 rpm and a rapid traverse speed of 40 m/min. It includes a high-capacity automatic tool changer with 20 positions and a dual clamping surface for efficient multitasking. Equipped with Siemens CNC 840D control for precise and versatile machining operations. If you are looking to get high-quality milling capabilities consider the CHIRON FZ 12 W machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2022, operating hours: 123 h, Control Unit Brand SIEMENS Model SINUMERIK One 828D Main Drive Spindle speed range 12000 Movement X-Axis Movement 550 Y-Axis Movement 550 Z-Axis Movement 510 Gcedpfsx D Rw Esx Ag Dsa Table Outer length 850 mm Outer width 650 mm Table load 600 kg Tools Slots in storage 24 Additional Equipment Automation interface with 6-axis robot, high dynamics Siemens PLC and HMI with safety module IDS industrial camera with Halcon Vision integration This 3-axis DMG M1 vertical machining center was manufactured in 2022. It features a Siemens SINUMERIK One 828D control, a spindle speed of 12,000 rpm, and a table size of 850 x 650 mm supporting up to 600 kg. Equipped with a 24-place tool changer and both internal and external cooling systems, it ensures precise milling operations. If you are looking to get high-quality milling capabilities consider the DMG M1 machine we have for sale. Contact us for more information. Application Types Milling