Daniel Radtke

Year of construction: 2015, condition: excellent (used), vertical automatic flat glass sand blasting machine with 4 air guns Kdedpfx Ahoz Dt T Te Eet working height : 2000 mm OPEN TOP including air compressor and dryer . voltage : 230/400 V 50 Hz

Condition: new, Year of construction: 2026, We offer a complete set of SUPERTOOTH jaw plates for Powerscreen Premiertrak 300 and Powerscreen Premiertrak 330 jaw crushers. Fixed jaw plate — part no. CW017-002-MN180, dimensions 1300 × 973 mm, weight 656 kg, material composition 18% Mn / 2% Cr. Swing jaw plate — part no. CW017-001-MN180, dimensions 1339 × 963 mm, weight 669 kg, material composition 18% Mn / 2% Cr. Kdjdpjz Dt Tyjfx Ah Est Other jaw plate and liner versions are available on request. The parts can also be manufactured from an alloy containing 22% Mn / 2% Cr. Our range also includes other spare and wear parts: wedges, side plates (cheek plates), toggle plates, toggle seats, springs, hydraulic cylinders, hydraulic motors, hydraulic pumps, HFO, HPTO, HRC and BOWEX couplings, liners, grizzly bars and many other components required for routine repairs and complete overhauls of these machines. Only from us: the chemical composition of the castings is confirmed by a QUALITY CERTIFICATE and verified with a spectrometer. Do not choose cheaper, lower-quality castings — insufficient manganese or chromium content can reduce the service life of jaw plates by up to 50%! We offer the widest range of spare parts for crushers and screeners in Poland, covering both stationary and mobile machines. We supply parts for machines from manufacturers including: Brown Lenox, Bruce, DKT, Extec, Finlay, HARTL, Hazemag, PSP, DSP, Keestrack, Kleemann, Komatsu, McCloskey, Metso, MFL, Nordberg, Parker, Omega, Pegson, OM, Powerscreen, Premiertrak, Terex, Red Rhino, Rubble Master, Sandvik, SBM, Tesab and others.

Condition: good (used), Approx. 51 Corlette carts, widths 1.20 and 1.80m, upholstered carts, furniture dollies, heavy-duty carts - used: Prices per unit ex works (net): Type 1 Corlette 1.80m: only €39.00 Type 2 Corlette 1.20m: only €29.00 Type 3 Upholstered cart: only €20.00 Type 4 Furniture dolly / furniture cart: €19.00 Kedpsz Dt Tmofx Ah Eodt Type 5 Heavy-duty cart: €25.00 Manufacturer: unknown Type: unknown Year of manufacture: unknown Type 1: 34x Corlette External dimensions, width: 1.80 x depth: 1.10 x height: 1.77, foldable with skids Type 2: 17x Corlette External dimensions, width: 1.20 x depth: 1.10 x height: 1.77 foldable with skids Type 3: 29x Upholstered cart Upholstery element cart, 2 levels (extendable, foldable) L: 2200, W: 700, H: 1230 (mm) Type 4: 50x Furniture dolly, 60x35cm, 300kg payload Type 5: 3x Heavy-duty cart 2.20L x 1.0W x 1.80H Condition: used Available: immediately Location: 37269 Eschwege

Condition: used, Technical details: welding current: 500 A Length: 590 mm height: 430 mm connection voltage: 400 V open-circuit voltage: 65 V capacity in kVA: 20,1 KvA protection class: IP23S weight of the machine approx.: 85 kg dimensions L x W x H: 0,60 x 0,44 x 0,44 m Kemppi FastMig KM 500 – MIG/MAG Welding Power Source The Kemppi FastMig KM 500 is a powerful industrial MIG/MAG welding power source designed for professional welding applications in metal fabrication, mechanical engineering, production and maintenance. Kedpfx Aez Dt Tgjh Esdt With a maximum welding current of approximately 500 A, the KM 500 is particularly suitable for demanding welding work and applications requiring high welding performance and a high duty cycle. The power source is designed as part of the modular Kemppi FastMig system and can be combined with suitable Kemppi wire feeding units, such as the FastMig MSF series. The modular design allows the power source and wire feeder to be positioned separately, making the system suitable for both workshop use and larger workpieces. Typical applications: steel construction, mechanical engineering, heavy fabrication, repair and maintenance, production welding and general industrial MIG/MAG welding. *

Condition: used, Technical details: welding current: 400 A Length: 590 mm height: 430 mm connection voltage: 400 V Kedpfx Ajz Dt Taoh Esdt open-circuit voltage: 50 V capacity in kVA: 18,5 KvA protection class: IP23S weight of the machine approx.: 47 kg dimensions L x W x H: 0,60 x 0,23 x 0,45 m The Kemppi FastMig KMS 400 is a powerful, industrial-grade MIG/MAG welding power source designed for professional use in workshops, metal fabrication, mechanical engineering, as well as manufacturing and maintenance applications. In combination with a Kemppi FastMig MSF wire feeder, the KMS 400 forms a modular welding system. The MSF wire feed units are microprocessor-controlled, providing precise and reliable control of the wire feed. Depending on the control panel installed, the system supports conventional MIG/MAG welding as well as synergic welding functions. *

Condition: used, Technical details: Kdedpjz Dt S Njfx Ah Eet power consumption: 205 A total power requirement: 13,6 KVA

Condition: used, Technical details: welding current: 250 A Length: 815 mm height: 390 mm connected load: 4,0 kVA connected load: 4,0 kW open-circuit voltage: 16 - 32 V machine weight approx.: 104 kg Ksdpfxsz Dt S Aj Ah Ejdt

Condition: used, mileage: 466,000 km, power: 375 kW (509.86 HP), first registration: 12/2020, fuel type: diesel, axle configuration: 6x2, wheelbase: 3,950 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,490 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2020, Equipment: ABS, central locking, cruise control, electric window regulation, fog lights, navigation system, parking heater, power mirror, spoiler, traction control, General information Number of doors: 2 Registration number: 26-BRB-8 Technical information Kdsdpsz Dt Svefx Ah Eot Number of cylinders: 6 Engine capacity: 12.419 cc Axle configuration Front axle: Max. axle load: 8000 kg; Tyre profile left: 80%; Tyre profile right: 80%; Suspension: leaf suspension Rear axle 1: Lift axle; Max. axle load: 7500 kg; Steering; Tyre profile left: 60%; Tyre profile right: 60%; Suspension: air suspension Rear axle 2: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 60%; Tyre profile left outer: 60%; Tyre profile right outer: 80%; Tyre profile right outer: 80%; Suspension: air suspension Weights Empty weight: 8.526 kg Carrying capacity: 19.474 kg GVW: 28.000 kg Interior Number of seats: 2 = Additional options and accessories = - Air horn - Aluminium fuel tank - Heated driver's seat - Heavy duty engine brake - Lock diff - Outside temperature display - Radio - Roof spoiler - Sleeper cab - Vehicle heater - Visor = Remarks = Steering liftin axcle

Condition: used, Year of construction: 2002, Technical details: x-Travel: 600 mm table cross travel (Y-axis): 500 mm w-axis: 250 mm x-travel: 600 mm y-travel: 500 mm z-travel: 350 mm drilling depth in one stroke: 600 mm number of spindle speeds: 300 - 6000 /100 - 1600 U/min drill capacity in steel: 3 - 25 mm table surface area: 900 x 500 mm table load: 2000 kg connected load: 10 kVA weight of the machine ca.: 4 t dimension machine approx.LxWxH: 2,0 x 2,8 x 1,9 m Kodpjz Dt Sisfx Ah Eodt The AUERBACH IXION AX1-TL is an industrial CNC deep-hole drilling machine designed for the precise machining of workpieces, particularly for producing deep holes with small to medium diameters. The machine is equipped with a powerful high-pressure coolant system and is designed for deep-hole drilling with single-lip carbide drills from Ø 3 to 25 mm. The coolant system has a tank capacity of 600 litres, a maximum coolant pressure of 90 bar and a maximum flow rate of 40 l/min. This ensures reliable cooling and efficient chip removal even during deep-hole drilling operations. The worktable measures 900 × 500 mm and is designed for a maximum table load of 2,000 kg. Four longitudinal T-slots provide flexible and secure workpiece clamping. The main spindle is driven by a 4.0 kW AC motor. Two belt-driven speed ranges provide programmable spindle speeds of 300–6,000 rpm and 100–1,600 rpm, allowing the machine to be adapted to different tool diameters and machining requirements. *

Condition: used, Year of construction: 2018, operating hours: 142 h, lifting height: 4,150 mm, free lift: 1,310 mm, fuel type: electric, mast type: triplex, fork length: 1,150 mm, total height: 2,020 mm, color: other, GVW: 2.032 kg Lifting capacity: 1.200 kg NEW BATTERY CELLS 24V 5PzB 500Ah, FUNCTIONS LIKE NEW! ONLY 142 HOURS! 220V high-frequency charger, SIDESHIFT, Fork length 1150 mm, Space between forks 850 mm, Power steering, Kdjdpoz Dt Scjfx Ah Est

Condition: good (used), Year of construction: 2012, Wall-mounted swivel crane, Abus, 250 kg, 5 m – used: Price ex works: only €950.00 (net)! Manufacturer: Abus Type: GM 2 250.8.1 Year of manufacture: 2012 Factory number: 220-104643 Lifting speed: 2.00 / 8.00 m/min Load capacity: 250 kg Outreach: approx. 5 m Motor: 0.09 kW / 0.35 kW 400 V / 50 Hz / 0 V 1.14 A cos $ 0.71 / 640 / 2770 1/min Kdjdpfxez Dt R Ej Ah Ejt Classification: FEM 2m, 60% duty cycle / 360 cycles/hour Insulation class: F IP55 Condition: good Available: immediately Location: Frankenberg / Saxony warehouse

Condition: used, axle configuration: 3 axles, first registration: 07/2014, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2014, Axle configuration Tire size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Kodpfoz Dt Rxsx Ah Esdt Rear axle 1: Tire tread depth left: 12 mm; Tire tread depth right: 12 mm Rear axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Rear axle 3: Tire tread depth left: 8 mm; Tire tread depth right: 10 mm Weights Unladen weight: 5,960 kg Payload: 32,040 kg GVWR: 38,000 kg Condition Damage: none

Condition: new, axle configuration: 3 axles, suspension: air, tire size: 385/55-22,5, color: blue, Year of construction: 2026, Equipment: ABS, - ADR - LED lighting - Air suspension - Disc brakes - Toolbox Internal number for inquiries: 6-166 Available immediately!!! NEW in our offer!! -> PAVIC - STAR 3-axle container chassis semi-trailer, telescopic for: 1 x 45" container 1 x 40" container 2 x 20" containers 1 x 20" centrally located and 1 x 40" HC 1 x 45" HC CHASSIS Heavy-duty main frame in I-beam construction, designed for particularly high durability; high-strength MC700 steel, automatically robot-welded. • Extension in the middle and rear area • Fixed front chassis • Locking mechanism by means of brake chamber in the middle and rear area • Suitable for a GENSET in the middle area AXLES 3 x 9 t SAF axles with disc brakes. SUSPENSION Air suspension. LIFT AXLE 1st axle. TIRES 6 x 385 / 55 R 22.5 (A-brand). RIMS 6 x 11.75 x 22.5 steel rims (Turkish brand). BRAKE SYSTEM WABCO braking system. 2-line brake system in accordance with EC regulations. PREMIUM EBS 2S/2M with RSS (Roll Stability System). Pneumatic parking brake. 1 x yellow air coupling. 1 x red air coupling. 1 x brake pressure valve (WABCO brand). TPMS. KING PIN 1 x coupling pin 2" (JOST or SAF brand). SUPPORT LEGS Mechanical support legs, operable on one side, with 2 speeds. Both support legs are operated via a crank handle on the right side (BPW or SAF brand). ELECTRICAL SYSTEM Voltage 24 V, 2 x 7-pole and 1 x 15-pole ISO, EC-compliant. Lighting according to standard with SAE tail/brake lights, side marker lights, brake warning lights and rear turn signals. 2 combined tail/brake lights (red). 2 combined turn signal lights (orange). 1 license plate light. 1 license plate holder. ADR. All components of the electrical system: ASPOCK ECOLED III. In accordance with EC regulations. ACCESSORIES • 6 x plastic fenders (DOMAR brand) • 2 x mud flaps • 2 x reflective strips and reflector markings on the rear and sides • 1 x rear bumper • 1 x water tank • 2 x wheel chocks with holders • 2 x aluminum side protection • 1 x toolbox • 12 x twistlocks (JOST) - Spring model of the twistlocks at the rear and in the middle • 8 x RoRo rings (according to IMO standards) PAINTING Before painting, surfaces and components are smoothed and then cleaned with a mixture of water and chemicals. Sandblasting up to SA 2.5, primer; then 2 coats of acrylic topcoat. RAL code 5015 sky blue. Financing / hire purchase, as well as leasing / partial amortization leasing is possible with our leasing partner. Kedpez Dt Rlefx Ah Eodt For further questions, our sales team is at your disposal. This is a non-binding offer. Subject to prior sale, errors and changes. General Information Year of manufacture: 2026 Axle configuration Tire size: 385/55-22.5 Axle brand: Pirelli Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle Weights Unladen weight: 4,998 kg Payload: 22,002 kg GVW: 27,000 kg Condition...

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total length: 5,650 mm, total width: 1,600 mm, total height: 2,520 mm, overall weight: 1,500 kg, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, vertical glass wasching machine 1600 mm OPEN TOP working direction : from LEFT to RIGHT min. glass size : 350 x H100 mm max. glass weight : 200 Kg Kdodpjz Dt Rfofx Ah Est in- en outlet conveyor size : 2000 mm working height : 550 mm glass thikness : 3 - 15 mm number of brushes : 4 brushes diameter : 120 mm speed : 0,5 - 5 m/min . total power : 7 kw machine body in stainless steel

Condition: used, Year of construction: 2012, 2012 Feeler HV-800 CNC Machining Center with Fanuc 18i-MB Controller X/Y/Z: 800/520/505 mm. 4th axis Unit: Peiseler AWUP 160. Table size: 950 x 520 mm. Spindle r.p.m: 15,000 r.p.m. Spind taper: BigPlus 40. Tools magazine: 30 pcs. Machine S/No: HVG044. Kodpfjz Dt N Uex Ah Esdt

Condition: excellent (used), Drill diameter: 31.75 mm Spindle mount: MK 3 Variable speed control: 180 - 2100 rpm Overhang: 280 mm Kdjdsz Dt N Ijpfx Ah Eot Table size: 350 x 450 mm Maximum distance between table and quill: 700 mm Drive motor: 380 V, 0.9/1.3 kW Weight: 270 kg

Condition: used, Year of construction: 2018, Horizon HT-30C Three-Knife Trimmer, used The Horizon HT-30C is an innovative and efficient three-knife trimmer specifically designed for the small-run and print-on-demand book market. Key Features: - Color touchscreen for easy operation and automatic settings - Fully automated job setup and quick changeover times - Precise cutting quality through servo motor-controlled knife positioning - Hydraulically controlled clamping and cutting pressure for mark-free trimming - Capability to continuously process books of varying thickness - Compatible with nearline binding machines like the Horizon BQ-270V for complete book production Technical Specifications: - Untrimmed book format: 148 x 200 mm to 320 x 320 mm Kdsdjz Dt Nzopfx Ah Eot - Trimmed book format: 145 x 200 mm to 303 x 303 mm - Cutting thickness: 1 - 51 mm - Production speed: Up to 500 books per hour - Storage capacity: Up to 200 recurring jobs All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Panel saw HOLZ-HER 1254 - used - Welded frame with extremely high rigidity, Stable locking mechanism of the saw carriage at the top and bottom, Retractable splitter for cutouts, Control panel at eye level, Digital display on the length stop, Digital display for horizontal cutting, Lift-and-roll transport system, Additional length stop at the bottom, Super-Cut scoring saw with carbide tipped reversible inserts, Scoring device with counter-rotation, Edging support, Dust extraction system TRK, Dust-tested ----- Technical data ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Edging height: 2,100 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Dust extraction nozzle Ø: 120 / 100 mm, Space requirement (L x W x H): 5,400 x 2,900 x 1,600 mm, Weight: 800 kg Quality information: - Guide strips renewed / overhauled - Saw spindle newly re-lagered - Complete basic inspection - Complete basic cleaning Kjdpfx Ahoz Dt Nnj Eedt - Electrical system checked - Immediately ready for use

Condition: like new (used), functionality: fully functional, Year of construction: 2014, operating hours: 2,607 h, fuel type: diesel, gearing type: automatic, empty load weight: 3,570 kg, Diesel forklift 11314 TOYOTA 02-8FDKF20 ✔ Fully inspected and ready for operation ✔ Maintenance performed Kdjdoz Dt Nhjpfx Ah Eot ✔ Warranty provided ✔ Service and spare parts supply guaranteed Specification: Forklift type Diesel forklift Product code 11314 Manufacturer TOYOTA Model 02-8FDKF20 Year 2014 Lifting capacity, kg 2000 Mast type Duplex with free lift Lifting height, mm 3000 Transmission type Automatic Operating hours 2607 Country France Weight (kg) 3570 Length x width x height, mm 2220 x 1150 x 2080 Overall height, mm 2080 Forklift attachments Side shift, Front and rear windshield

Condition: reconditioned (used), functionality: fully functional, pressure: 160 bar, empty load weight: 96 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, Kärcher HDS 698 CSX ECO Hot Water Pressure Washer New heating coil The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle Built-in high-pressure hose reel for easy winding and storage Durable brass pump head with new ceramic pistons and seals ensures long, trouble-free operation High-efficiency three-phase motor ensures stable performance even during prolonged use With an operating pressure of 160 bar and a flow rate of 650 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture Each unit we offer features custom-taken photos; you are buying the exact machine shown Technical specifications: Model: HDS 698 CSX ECO Supply voltage (V): 400 ~ 3-phase Flow rate (l/h): 650 Operating pressure (bar): 30 - 160 Max. Water heating temperature (°C): 80–155 Connected load [kW]: 4.5 Kdedpez Dt Nbefx Ah Ejt Dimensions (L x W x H mm): 940 x 600 x 740 High-pressure hose length (m): 20 Weight (kg): 96 EQUIPMENT: NEW heating coil Built-in hose reel NEW heavy-duty spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 20m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Built-in chemical tank allows for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other lines.

Year of construction: 2017, operating hours: 7,500 h, condition: excellent (used), functionality: fully functional, Manufacturer: MAZAK Model: VARIAXIS J-600 Kodpfez Dt I Rex Ah Eedt Year: 2017 Control unit: Smooth X X-axis travel: 850 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle connection: DIN-69871 Tool magazine capacity: 30 Maximum spindle speed for milling: 12,000 rpm Maximum workpiece dimensions: 730 mm Maximum workpiece height: 450 mm 5-axis continuous operation: Yes Spindle power: 11 kW Table size: 600 x 500 mm High-pressure coolant system through the spindle: 20 bar B-axis travel: -120 / +90 Maximum workpiece weight (spindle): 500 kg

Year of construction: 2002, condition: good (used), machine/vehicle number: 3298, Offer 26206 Twin-chamber blasting cabinet with material recovery and dust extraction Technical data: - 2 blasting chambers - Blasting chamber width / blasting chamber depth: 600 / 940 mm each - Workpiece access via side doors - 2 hinged viewing windows: 400 x 250 mm - 2 blasting guns - 2 electric foot switches Kdodpsz Dt I Dofx Ah Eet - Material recovery system - Dust extraction system with cartridge filter - Power supply: 400 V / 3 kW - Pneumatic connection: 6 bar - Space requirement: approx. W 1500 x H 2200 x D 1600 mm - Weight: approx. 350 kg

Condition: used, Year of construction: 2001, operating hours: 37,300 h, functionality: fully functional, Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connection power: 19kVA, control system: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 37,700 h, multi-tool control, optional sensor-controlled feeder, marking and blowing device for small parts, chip conveyor with container, soft punch. The machine has been regularly maintained and has already been upgraded with the conversion kit for the new linear amplifier. Kdjdpfx Ahsz Dt Iws Ejt

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Roll-off compactor Year of manufacture: 2011 Kedpfx Aez Dt Idoh Ejdt 18 m³ 5.5 kW 400 V, 16 A CEE 200 bar in working order

Condition: reconditioned (used), Year of construction: 2025, briquette diameter: 100 mm, Equipment: cooling unit, emergency stop, Briquette press Di Più MB100 – Year of manufacture 2009 – Complete system with saws & accessories (Overhauled in 2026!) Briquette press Pawert SPM I-90/200 Overhauled in 2025 (Like new!) For sale are briquette presses of the type Di Più MB100, year of manufacture 2009 (overhauled in 2025/26), including saws, conveying equipment, and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, wood chips, and wood residues. --- Technical data (per machine): Type: Di Più BRIK MB100 Year of manufacture: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Particle size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic ram press Kdedpfx Ahjz Dt H To Eot --- Equipment: Material hopper Conveying screws Hydraulic system Control cabinets Saws for cutting briquettes to length Protective covers & safety systems Discharge units --- Scope of delivery: 3 complete Di Più MB100 briquette presses Saws Conveying equipment & accessories Spare parts upon request --- Application areas: Sawmills Wood processing industry Biomass plants Briquette production for energy & sale Location: on request Transport: Organization possible by agreement Price: on request Individual sale or complete package possible