Alusen Aluminium Profiltechnik GmbH

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0799336047, Elumatec double mitre saw Lasdpfxexf Dugj Ab Ujh

Condition: excellent (used), Year of construction: 2008, Maximum cutting lenght : 3000 mm Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° Laodpfexc Tyyox Ab Ujh For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying WINDOWS 2000 Software

Condition: like new (used), Year of construction: 2019, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 500 mm, air pressure: 6 bar, Emmegi Classic Magic 500 5 Meter Year built: 2019, as new condition - LCD display with backlighting - Pre-installed interface for industrial label printer connection - USB port - Capability for single cuts - Storage for 99 profile correction values and automatic calculation of cutting lengths for miter cuts - Storage for 20 cut lists entered via the keyboard (up to 50 sets each) - Storage for 10 cut lists imported via RS232 serial interface from an external PC (up to 100 sets each) MACHINE FEATURES - Position detection of the movable unit via direct measuring system with magnetic tape - 2 carbide-tipped saw blades, diameter 500mm - Pneumatically operated full safety covers over the cutting area - 2 pneumatic horizontal clamping units with low-pressure safety device - Profile support roller conveyor - Lubrication system: mist spray or minimum quantity pulse spray system (depending on version) Laodjw Svxlspfx Ab Ush - Cuts with saw blades Ø 500 mm in the miter range from 22°30’ (external) to 90° - Manual profile support - Pre-installed interface for automatic activation of MG4 chip extraction unit - Two standard profile inserts - Metric scale - Label printer incl. label peel-off function - Overlength cut - Shortcut - Cross cut - Macro - Automatic cut - Pro software package

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: C123969, saw blade diameter: 500 mm, rotational speed (max.): 2,820 rpm, overall weight: 1,490 kg, tilt adjustment saw blade: 22 °, TECHNICAL DETAILS Speed: 2,820 rpm Number of saw blades: 2 Saw blade diameter: 450 & 500 mm Mitre angle: 22° - 90° Motor Blade motor power: 2.2 kW MACHINE DETAILS Weight: 1,490 kg Motor Lsdpfx Abow Nvxye Usah Blade motor power: 2.2 kW Electrical data Power: 5.3 kW Current: 13 A Voltage: 400/3 V Frequency: 50 Hz Note: The machine will be available from 01.12.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting length (max.): 3,000 mm, saw blade diameter: 380 mm, overall weight: 560 kg, Minimum cutting length at 90°: 520 mm Minimum cutting length at 45° (swiveled): 520 mm Locking positions at 15°, 30°, and 45° Swivel range continuously adjustable from 0° to 45° Hydropneumatic saw feed Saw blade diameter: 380 mm Saw blade speed: 2,800 rpm Voltage: 230/400 V, 3~, 50 Hz Output per motor: 3 kW Lsdpfx Aow Ng Rgob Uoah Compressed air connection: 7 bar Version: 3 m

Condition: like new (used), Year of construction: 2016, operating hours: 22 h, functionality: fully functional, saw blade diameter: 500 mm, Elumatec Double Mitre Saw DG 142 with E580/1 Control – Precision Saw for Aluminium and PVC Profiles For sale is a high-quality Elumatec DG 142 double mitre saw equipped with electronic control system E580/1. This machine is ideal for the precise cutting of aluminium, PVC, and light metal profiles – particularly suited for window, door, and façade construction. Technical specifications: Manufacturer: Elumatec Model: DG 142 Control: E580/1 (automatic positioning and angle adjustment) Mitre cuts: 45° – 90° (automatically adjustable) Cutting length: up to approx. 5,000 mm (depending on configuration) Blade diameter: approx. 500 mm Speed: approx. 2,800 rpm Connection: 400 V / three-phase Condition: used, technically flawless Availability: immediate +++ Operating hours: 22 HRS +++ Special features: - Automatic positioning of both saw units - Precise and clean cuts thanks to stable machine guidance - Programmable control for highly repeatable series cuts - Excellent cutting quality, also on demanding profiles - Ideal for metal fabrication, window production, and conservatory construction The machine is network-capable incl. extraction unit + SICK light curtain Laodpfxsw D Rv Ds Ab Ush

Condition: good (used), functionality: fully functional, FOM BLITZ 2 double-head mitre saw Available for demonstration in our premises Equipment price includes loading Ledpfx Asw Dp A Njb Ujah Transport and installation available at extra cost.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical information – Elumatec DG 244/2 year 2008 Control unit model: E355 Main electrical connection: 3/PEN/400V - 50 Hz Power consumption: 12.8 kW Additional information Lsdow A Iubspfx Ab Ueah Advantages of the machine Technical advantages of the machine: - Saw blade diameter: 550 mm - Saw blade speed: 2,800 rpm - Compressed air supply: 7 bar - Weight: 1,850 kg Machine can be inspected in operation in department 76 Available from week S38/S39 Price includes loading

Condition: used, Year of construction: 1993, Technical details: cutting diameter: 195 x 120 mm cutting range min.: 135 x 120 mm saw blade diameter: 380 mm cutting length min.: 500 mm cutting lenght max.: 6000 mm max. spindle speeds: 2800 U/min total power requirement: 3 kW Laedpfx Aswz Hygob Ush weight of the machine ca.: 850 kg

Condition: good (used), Blade diam 420mm, lenght 4,800mm. Ledpfx Ajwzvacob Uoah

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Year: 2011 - technically efficient, ready to work – after full service - Cutting length: 6000 mm - Discs: 420 mm (bottom cutting) - E355 control Lodpjwy Emcofx Ab Ujah - Digital angle indicator - Pneumatic angle adjustment 45-90 degrees - Cutting to outside dimensions, without correction - Cooling and lubrication system - Roller feeder - Vertical and horizontal pneumatic clamps - Automatically lowered and raised disc guards

Condition: new, Year of construction: 2025, 3 NC axes for length as well as electronic tilting of the saw blades outwards 22.5° and inwards 135° Cutting length 5000mm Processing of individual cuts Processing of cutting lists Laedpfxownfvtj Ab Uoh Creating cutting lists via keyboard Import of cutting lists via USB storage device or over network Corner angle automatic/incremental cut Overlength cut processing Short cuts from 5mm cutting length Cross cuts Manages printing of labels with data or barcodes Hydropneumatic saw blade feed, continuously adjustable Pneumatic protective hoods Moving roller conveyor at the right saw unit with additional clamping cylinder Length positioning taking into account the saw angles and profile height Profile height measurement with length compensation incl. horizontal clamping cylinder Each saw unit has one horizontal and one vertical clamping cylinder Additional horizontal clamping cylinder at the fixed saw unit left of the saw blade 1 piece profile support between the saw units, pneumatically swiveling With 2-hand control IPC with Windows Embedded and HMI 15.0” touchscreen Incl. the options Minimum quantity spray devices Label printer Network connection for teleservice, 1 year duration We always have suitable extraction systems in stock, also for already existing aluminum saws!

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: LC191, cutting length (max.): 7,000 mm, air pressure: 8 bar, Double head radial saw machine. Ljdpowm Hl Hofx Ab Ueah

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, Used Emmegi PrecisionTS2 Emmegi Precision TS2 Double Miter Saw Year of 2014 Cutting length 6000mm Double miter saw with 3 controllable axes with automatically movable saw unit and electronic control of all miters from 45° (inside) to 15° (outside) with an accuracy of 280 intermediate positions per degree. Including Lsdpfewaz Agjx Ab Ueah profile support roller conveyor on the movable unit Additional clamping device on the roller conveyor Label printer with dispenser PRO software (overlength cutting, underlength cutting, cross-cutting, wedge cutting) SLICE software (butt cuts with variable corners and lengths up to a usable cut of 500mm) Driver for connecting external calculation programs

Condition: excellent (used), Year of construction: 1998, cutting diameter 150 mm cutting range min. 150 mm saw blade diameter 400 mm cutting length min. 420 mm cutting lenght max. 4000 mm dimensions of the machine ca. 4800 x 1100 x 1500 mm Ledpevwgnwefx Ab Ujah The double tiller saw is in very good condition and has only been used very little use.

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW Lodpfxju Nigws Ab Ueah weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm Lodpeu Nigkjfx Ab Ujah mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1049333220, cutting length (max.): 4,500 mm, saw blade diameter: 420 mm, double mitre saw 4,5 m D=420mm; E 355; 22,5° inside second-hand, year of manufacture: 2008 M-No.: 1049333220 - cutting length 4.500 mm - saw blade diameter 420 mm - Swivel range inwards, pneumatic 90° - 45° (up to 22.5° manual with digital display) - External dimension cutting for all cutting variants. This eliminates the need for length calculations necessary. Great advantage for special angles. Positioning control E355 - Drive-independent measuring system - Positioning accuracy +/- 0.1 mm per meter - Pneumatic locking in position - 5" matrix display with membrane keypad and handwheel for navigation in the operating menus - Memory for 999 data records Correction values for profiles - The record memory can store the record number, length dimension, profile number, angle position and number of pieces can be saved - Switch to 2nd language - Switchover mm/inch - RS 232 interface Lodpfxsuw T Stj Ab Usah Technical data: Smallest cutting length at 90°: 335 mm Smallest cutting length at 45° inclination: 335 mm Voltage: 400V, 3 PH, 50 Hz Power output per motor: 4 kW Compressed air connection: 7 bar Air consumption per work cycle without spraying: 40 l with spraying: 64 l Accessories supplied: 2 carbide saw blades for aluminum and PVC (used): 420 mm diameter, 96 teeth Dosing spray device The following accessories are also included: 1x mobile workpiece support

Condition: excellent (used), Cross-cut saw Velox 350 with roller conveyor approx. 5000 mm Machine ready for immediate use 1.5 kw, 380 Volt 2 speeds Double miter cuts possible Lajdpfx Ast Ta Ursb Ush

Condition: used, Year of construction: 1995, cutting width 375 mm Lasdpfxjtv Rgrs Ab Ujh Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: good (used), Year of construction: 2009, in a good working condition, DG244/E555/1 , 6 meters Ljdpfxotuvg Do Ab Usah

Condition: good (used), Year of construction: 2016, Year: 2016 - technically efficient, ready to work - after full service Ljdstqmmdepfx Ab Ueah - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

Condition: good (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work - after full service - cutting length: 6000 mm - discs: 550 mm - E555 control Laedper Ikvujfx Ab Ujh - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cutting according to external dimensions, without correction - cooling installation - roller feeder - vertical pneumatic clamps - automatically lowered and raised disc guards - chip extraction for each head

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round steel at 45°: 300 mm, cutting range round steel at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Laedpfsq Atyzjx Ab Ush Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm With support elements approx. 800 mm (optional) Noise emission: 74 dB(A) Measured at the operator's workplace Including the two roller conveyors shown.

Condition: new, Cutting range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° R: 230 mm Lsdjiqt Rlopfx Ab Ueah square 45° R: 220 x 220 mm flat 45° R: 230 x 150 mm round 60° R: 140 mm square 60° R: 140 x 140 mm round 45° L: 200 mm square 45° L: 175 x 175 mm flat 45° L: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw blade: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double mitre saw with swivel saw arm from left -45° to right +60° - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration work - With 2 saw blade speeds for optimum adaptation to the workpiece - Hydraulic lowering cylinder - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - CE/IEC, German documentation and German service Scope of delivery: - BiMetal band saw blade 2925 x 27 x 0.9 mm - Band tension adjustable via pressure gauge - Carbide guides - Quick-clamping vice - Material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut - Underframe