Maschinenservice Chemnitz GmbH

Condition: used, Year of construction: 1966, sheet thickness steel (max.): 4 mm, working width: 2,050 mm, overall weight: 4,300 kg, max. working length 2050 mm max. sheet thickness 4 mm Weight 4300 kg Dimensions 3.5 x 2.1 x 1.7 m Nksljukd R Sjhccqtsw

Condition: good (used), Year of construction: 1992, Travel : X-axis (longitudinal movement) 880 mm Y-axis (transverse movement) 300 mm Z-axis (vertical movement) 385 mm Clamping table : Clamping surface 315 x 1250 mm Nslhccetvfwcsqtskw Table load 1000 kg Spindle head : Tool holder 50 SK Speed 28 - 1400 rpm Drive power 5.5 kW Feed : X-, Y-axis 16 - 800 mm/min Z-axis 5 - 250 mm/min Rapid traverse : X-Y-axis 3150 mm/min Z-axis 1000 mm/min connected load : 8 kW Weight : 4.0 t Space requirement : L x W x H 2.3 x 2.0 x 2.6 m Accessories : * various tool holders * Operating instructions

Condition: good (used), Year of construction: 1991, Control Fanuc O-T Turning diameter max. 180 mm Nslhccqslmlwdotekw max. turning diameter over slide 120 mm spindle bore 26 mm speed 6000 rpm rapid traverse 10 m/min X-axis 200 mm Z-axis 180 mm Space requirement L x W x H 1,3 x 1,6 x 2,2 m Weight 1500 kg

Year of construction: 2013, Condition: excellent (used), Punching force 80 kN working stroke 40 mm installation height 140 mm throat 110 mm Working pressure 10 bar Space requirement L x W x H 0.9 x 0.9 x 1.4 m Nkslhcelmk Uyocqtew Weight 250 kg Operating instructions

Condition: excellent (used), Year of construction: 2003, Cutting capacity Round material 0°-360 mm; 45° left -300 mm; Nkelhccqjixqdbotow 60° right-300 mm; 45° right-180 mm square 0°-350 mm; 45° left-300 mm; 60° right-300 mm; 45° right-180 mm rectangle 0°-420x300 mm; 45°left-300x300 mm; 60°right-300x300 mm; 45°right-180x180 mm saw band dimensions 4640 x 34 x 1,1 mm connected load 3,6 kW weight 1,8 t Space requirement L x W x H 2.8 x 1.8 x 2.1 m

Condition: good (used), Year of construction: 1995, Technical data: - Pressure capacity 250 KN - max. sheet thickness 6 mm - max. punching diameter 90 mm Nslohikdashccqtekw - stroke 42 mm - throat 500 mm - maximum stroke rate 200 H/min - connected load 4 kW - space requirement LxWxH 1000 x H 1750 x D 1400 mm - weight approx. 1600 kg

Condition: like new (used), Year of construction: 1989, 100 various tool holders SK 50 partly unused "NEW especially suitable for Heckert console milling machines and machining centers C500 or C630 Nksleg U H S Rohccqtow

Year of construction: 1974, Condition: good (used), Drilling capacity in steel 20 mm Drilling capacity in cast iron 32 mm Morse taper in spindle MK 3 drilling spindle stroke 160 mm working surface table 320 x 345 mm table tiltable +/- 90 ° Speed range 95 - 2000 rpm Feed range normal 0,08 - 0,32 mm/rev. Motor power 1,2 kW Weight 470 kg Outer dimensions W x D x H 0.9 x 0.6 x 1.9 m Nkslhccjg Rxdrsqtjw Equipment: Operating instructions

Year of construction: 1984, Condition: reconditioned (used), Machine is modernized in 2015. Drilling capacity max. 20 mm Tool taper 2 MK speed 355/710/1400/2800 rpm spindle stroke 100 mm spindle throat 210 mm headstock adjustment 250 mm max. distance spindle-table 445 mm table surface 340X280 mm connected load 1,1 kW weight 0,165 t Nolhcjgqukfecqtekw space requirement LxWxH 0,6 x 0,5 x 1,3 m

Condition: excellent (used), Support bearings suitable for Union Boring mills BFT80/3 and BFT 90/3 and BFT90/5 Nkjlhccscxa A Asqtsw -long version -for spindle diameter 90mm -for spindle diameter 102mm on request

Condition: good (used), Support bearings suitable for Union boring mills BFT80/3 and BFT 90/3 and BFT90/5 -short version Nkolhcocw St Sjcqtew -for spindle diameter 90mm

Condition: good (used), Support bearings for Union Boring mills BFT80 and BFT 80/2 with fixed face support -short version Nslhjcw Sthjccqtokw -for spindle diameter 80mm

Condition: good (used), Plan support for Union drilling works of the series type: BFT80 / BFT90 / BFT102 RPM depending on engine type: 4-250 U/min-1 Maximum travel: 160 mm Nkslhcjcwwlcecqtsw Also available: Swing arm / mount for attachment to the stand Steel holder

Condition: new, Control unit for BT-2 / BT-12 drilling machines Other spare parts for these machines available on request! Njlhcscwgauscqtokw