LATZKE Härteprüfung GmbH

Year of construction: 2023, condition: like new (used), Binder FP 400 Laboratory Oven Year of manufacture: 2023. Like new, unused. 2-year warranty on spare parts Binder FP 400 Material Test Chamber The BINDER FP 400 material test chamber is specifically designed for demanding applications in biological, chemical, medical, and food industry laboratories. It features exceptionally precise temperature control and uniform temperature distribution throughout the entire chamber. This makes the device an ideal foundation for reproducible materials and stability testing, incubation, or developmental processes. Compared to similar test or climate chambers, it sets itself apart with high efficiency, energy savings, and user-friendly operation — greatly simplifying daily laboratory workflows. Technical features and advantages in everyday laboratory use: Gisdpfx Afeyt A Ens Uop The advanced FP 400 technology meets the highest standards of safety, energy efficiency, and ease of operation. This material test oven allows precise control of temperature conditions across a wide range of testing and development processes—from microbiological cultivation and chemical reaction studies to stability testing of sensitive samples. Key technical specifications at a glance: - Temperature range: approx. 5 °C above ambient up to max. 300 °C - Internal volume: 400 liters; maximum total load capacity: 90 kg (up to 35 kg per shelf) - Temporal temperature deviation: ±0.3 K; spatial temperature variation: 1 K at 70 °C, 2.5 K at 150 °C, 4.8 K at 300 °C - External dimensions: 1235 x 1025 x 765 mm (W x H x D); internal dimensions: 1000 x 800 x 510 mm (W x H x D) - Power supply: 400 V, 3 N ~, 3.4 kW, 50/60 Hz - Power consumption: 520 W (70 °C), 1200 W (150 °C), 2340 W (300 °C) - Protection class: IP 20 according to EN 60529, certified according to DIN 12880 Additional features: - Interior made of high-quality stainless steel – ensures maximum durability and exceptionally easy cleaning - Digital temperature display and intuitive operation via ergonomic control panel - Practical door lock; quiet operation; low working noise - Environmentally friendly and energy saving due to low energy consumption and advanced insulation design - Flexible interior configuration with optional shelves and drawers (up to 10 shelves can be installed) - Two inner glass doors allow quick visual inspection without affecting temperature levels - Optimized air flow ensures optimal temperature uniformity - Easy to transport and install thanks to its compact design and ergonomic handle The steam chamber has a large capacity of 498 liters, and the advanced air exchange system (16–18 exchanges per hour depending on temperature) ensures rapid stabilization of conditions. The recovery time to set parameters after a brief door opening remains minimal, even at high temperatures—crucial for frequent routine operations. Compliance with globally recognized standards DIN 12880 and EN 60529 (IP 20) guarantees safe and standards-compliant operation for daily use. This device is thus perfectly suited for quality control laboratories, industrial test applications, and academic research projects where the highest precision is required.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Gjdpfxeytr Swo Af Uoip Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: excellent (used), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heat Chamber The oven will be available at a later date. Description: For sale is an industrial tempering oven / heating cabinet from Vötsch Industrietechnik GmbH. This unit is ideally suited for industrial tempering, drying, and heat treatment processes. Thanks to its large useful chamber, it is possible to process large or multiple components simultaneously. The oven is controlled by a JUMO IMAGO 500 controller, enabling precise temperature management and automated programs. Typical fields of application: Industrial production Plastics and metal processing Component drying Heat treatment Testing technology / Material testing Laboratory and research applications The system is of robust industrial quality and designed for continuous operation. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250 °C Temperature safety classes: TB Class 1 TWB Class 2 Gijdoytrzfjpfx Af Uop Interior: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm, Height: 2500 mm, Depth: 2250 mm External dimensions: Width: 2900 mm, Height: 3530 mm, Depth: 2700 mm Load capacity: Internal chamber load capacity: 400 kg Floor surface load: 1000 kg Weight: Net weight: 1850 kg Electrical data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated current: 90 A Rated power: 54 kW Connected load: 58 kW Additional data: Minimum exhaust air volume: 600 m³/h Reduced exhaust air volume: 150 m³/h Purge time: 465 s Total steam space: 14.9 m³ Sound pressure level: < 70 dB(A) Temperature limiter shut-off temperature: 280 °C Selectable temperature limiter: 270 °C Weight: 1850 kg Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Any further questions can be answered by phone.

Condition: excellent (used), Weiss Model: WT11-340/40 Weiss Temperature Test Chamber, Air-Cooled Temperature range: -40°C to +180°C Temperature fluctuation over time at center of test chamber: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (heating): 2.3 K/min Temperature change rate (cooling): 1.6 K/min Heat compensation: max. 1000 W Internal test chamber dimensions: Height 750 mm x Width 580 mm x Depth 765 mm External dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm Test chamber volume: approx. 335 liters Rated voltage: 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.9 kW Rated current: 9.0 A Refrigerant: R404A Weight: approx. 490 kg For your security as a buyer, the following information applies! The following steps are performed on our chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, new fill with legally compliant refrigerant 3. Leak test including certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Gjdpfx Aeytqnqsf Ueip Scope of delivery: (see photo) (Specifications and details subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Godpfeytn Hksx Af Ujip Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Year of construction: 2001, condition: used, Erichsen Universal Sheet and Strip Testing Machine Model 145-60 Condition: Used Year of manufacture: 2001 Technical Specifications Hydraulic drive Motor power max.: 11.5 kW / 1500 rpm Pump output (small pump circuit): 12.3 dm³/min Pump output (large pump circuit): 31 dm³/min Test cylinder Punching force: 665 kN / 160 bar Hydraulic test head opening Max. operating pressure: 95 bar Holding pressure: 50 bar Drawing force ranges, switchable Small drawing force range: 37 kN / 10 bar Medium drawing force range: 225 kN / 60 bar Large drawing force range: 600 kN / 160 bar Max. drawing stroke: 150 mm Max. drawing speed: 750 mm/min Drawing ram stroke display: Resolution 0.1 mm Giodeyr R Uhopfx Af Uop Electrical connection values Power supply: 400 V three-phase, 50 Hz Fuses: 25 AT and 35 AT Ambient operating temperature: between +5° and +50° C Dimensions, weight Dimensions (L/W/H): 1800 mm / 1320 mm / 1400 mm Net weight: approx. 2400 kg

Year of construction: 2017, condition: ready for operation (used), A torsion measuring device EasyDur for material testing is available. Measuring range: 0.2Nm/2Nm/5Nm/50Nm, dynamometer capacity: 200kg. Documentation available. An on site inspection is possible. Giedpfoyr Rwvex Af Uep

Condition: excellent (used), Binder Type: MKFT 720 E3.2 Temperature and Climate Test Chamber, Air-Cooled Temperature range: -70°C to +180°C Humidity range: 10% RH to 98% RH The MKFT climate chamber is a specially designed environmental simulation cabinet for industrial materials testing and environmental simulation. It offers exceptional performance that far exceeds the capabilities of a standard heating chamber, meeting all requirements for materials testing, as well as aging and stress tests. Technical data: External dimensions: Width: 1615 mm Height: 2005 mm Depth: 1230 mm Internal dimensions: Width: 1200 mm Height: 1020 mm Depth: 600 mm Internal volume: 734 liters Net weight (empty): 635 kg Maximum total load: 160 kg Maximum load per shelf: 40 kg Temperature performance: Temperature range: -70°C to 180°C Temporal temperature deviation: 0.1...0.5 ± K Spatial temperature deviation: 0.3...2.0 ± K Average heating rate according to IEC 60068-3-5: 4.8 K/min Average cooling rate according to IEC 60068-3-5: 4.0 K/min Max. heat compensation: 5000 W Climate performance: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation depending on setpoint: 0.1...1.0 ± K Max. heat compensation: 800 W Electrical data: Rated voltage: 400V 3N~ ±10% 50Hz Rated power: 13 kW 22.2 A Refrigerants: R-404A / R-23 Important information for you as the buyer: The following services are carried out in advance on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: Used Scope of delivery: (See photo) Gjdpfx Afsyr Hi Uo Uoip (Specifications and technical details subject to change and error!) Feel free to contact us by phone for any further questions.

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Good day, We are pleased to offer, without obligation, a pre-owned forced air drying oven / drying cabinet from Binder, model FD 53. Manufacturer: BINDER GmbH, Germany Model: FD 53 Article number: 9010-0082 Year of manufacture: 2015 Temperature range: +5°C above ambient to 300°C Heating-up time to 70°C: approx. 7 min Heating-up time to 150°C: approx. 24 min Heating-up time to 300°C: approx. 60 min Spatial temperature deviation at 150°C: approx. 6.7 +/- K Interior volume: 53 L Internal dimensions: 400 x 400 x 340 mm (W x H x D) External dimensions: 640 x 660 x 630 mm Max. number of shelves: 5 units Shelf dimensions: 385 x 300 mm (W x D) Max. load per shelf: 15 kg Permissible total load: 40 kg Weight (empty): 44 kg Electrical supply: 230V, 50/60 Hz Current consumption: approx. 5.3 A Rated power: 1.2 kW Energy consumption at 70°C: approx. 172 W Energy consumption at 150°C: approx. 429 W Energy consumption at 300°C: approx. 951 W Temperature controller: Microprocessor PID controlled Safety class: 2 (DIN 12880) Controller function (timer): 0–99 hours Areas of application: These units are suitable for precise temperature control of non-hazardous materials, as well as for drying and heat treatment of solid or powdered materials and bulk goods by means of heat input. The ovens can also be used for drying items such as glassware and for hot storage of liquids in containers. Note: The forced air drying oven / drying cabinet is in good condition, fully functional, and can be tested under power in our workshop. Note: The above technical data is taken from the manufacturer’s operating manual, brochures, or other sources. We cannot guarantee the accuracy and completeness of this information. Gisdpfxoypv Ihj Af Usp Scope of delivery: 1 x Forced Air Drying Oven / Drying Cabinet, Manufacturer: BINDER GmbH, Model FD 53 We would be pleased if this machine is of interest to you. Your Service Team Mertens & Frowein GmbH

Year of construction: 2018, operating hours: 1,448 h, condition: excellent (used), Advanced X-ray inspection with the perfect balance of high performance detection sensitivity and low operating costs Advanced X-ray detection that strikes the balance between optimal sensitivity and economic operation. Suitable for a wide range of products, this X-ray inspection system can be adapted to virtually any application. Gijdpfx Afoynzaas Ujp -GA (Genetic Algorithm) image processing optimises detection for individual customer requirements -Integrated air conditioning system -User-friendly 17” touch screen control Technical data in attached leaflet

Condition: excellent (used), Binder Type: Binder ED 53 For sale is a high-quality BINDER ED 53 drying oven, Made in Germany. This unit is ideally suited for laboratory, workshop, research, electronics, material testing, or hobby applications that require constant temperatures. Features: - Precise digital temperature display - Robust industrial-grade quality - Even heat distribution - Made in Germany - Ideal for professional applications Capabilities: The BINDER ED 53 is a precision drying oven with natural convection. It is used for: - Drying samples and materials - Heating components - Tempering of workpieces - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably regulated. Thanks to its high-quality insulation and construction, the unit operates consistently and stably. Technical Data: - Model: BINDER ED 53 - Temperature range: up to 300 °C - Rated power: 1.20 kW - Connection: 230 V / 1N~ - Current draw: approx. 5.3 A - Frequency: 50–60 Hz - Protection class: IP20 - Temperature protection: DIN 12880 - Device class: 2.0 - Interior volume: approx. 53 liters - Approx. dimensions: - External: approx. 63 × 63 × 57 cm (W × H × D) - Internal: approx. 40 × 40 × 33 cm Gsdpfsynh E Ajx Af Usip - Weight: approx. 40–45 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data. All data provided without liability!) For further questions, feel free to contact us by phone.

Condition: ready for operation (used), Binder KB-115 Cooling Incubator Heating Oven External dimensions: L 83.5 cm x W 68 cm x H 85 cm Internal dimensions: L 60 cm x W 40 cm x H 46 cm Temperature range: -10°C to 100°C Rated voltage: 230V You are welcome to arrange a viewing. You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Gijdpfx Asynhp Uof Usp Subject to prior sale. Visit our shop and check out our other offers as well. Company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Year of construction: 2019, condition: excellent (used), Memmert ICH 750 L eco climate chamber. Chamber directly from the manufacturer, fully tested and functional. Gijdsymy Utopfx Af Uep Climate chamber ICH 750L, 115 V, lighting module ICH Q1B option 2, light intensity 8000 lux, 4 fluorescent tubes with cool white light – 2 tubes with UV lamps. Temperature range from -10°C to +60°C without humidity, with humidity 0-60°C, RH 10–80% – ICH750L. Included: software on USB stick.

Condition: excellent (used), Thermo Scientific Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Data: - Heat transfer medium: water - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm Godpjymn Egefx Af Usip - Weight: 55 kg Total: - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Memmert Type: UFP 800 Basic Equipment of the Device - Electronic, fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal protocol memory with 1024 kB for storing actual temperature, setpoint temperature, air turbine, air flap, and error states with a timestamp - Device control and logging of actual values on MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for forced-air cabinets (settings in 10% increments) - Servo-motor controlled air flap (settings in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn knob for easy operation of the device - Visual alarm indicator - Built-in buzzer as an alarm for setpoint exceedance, as an acoustic signal at program end, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-tracking monitoring (ASF) - Mechanical temperature limiter (TB, protection class 1) - Monitoring relay for heater shutdown in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent interior and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and for reading the internal controller log Technical Data: - Chamber: made from stainless steel, highly stable and easy to clean due to deep-drawn profiled structure. - Housing (outer shell): textured stainless steel, rear panel galvanized steel sheet - UFP 800 mobile and lockable on wheels. - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm Godpfx Afoymnv Ej Usip - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N〜 400 V 50/60 Hz - Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), Memmert Type: UFP 800 Basic Equipment of the Device - Electronic, fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter "Error Messages") Godpfx Afsymm Ers Usip - Language selection - Alphanumeric text display - Internal protocol memory with 1024 kB for storing actual temperature, setpoint temperature, air turbine, air flap, and error states with a timestamp - Device control and logging of actual values on MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for forced-air cabinets (settings in 10% increments) - Servo-motor controlled air flap (settings in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn knob for easy operation of the device - Visual alarm indicator - Built-in buzzer as an alarm for setpoint exceedance, as an acoustic signal at program end, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-tracking monitoring (ASF) - Mechanical temperature limiter (TB, protection class 1) - Monitoring relay for heater shutdown in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent interior and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and for reading the internal controller log Technical Data: - Chamber: made from stainless steel, highly stable and easy to clean due to deep-drawn profiled structure. - Housing (outer shell): textured stainless steel, rear panel galvanized steel sheet - UFP 800 mobile and lockable on wheels. - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N〜 400 V 50/60 Hz - Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), Zwick/Roell Model: 500N zwicki Zwick/Roell Material Testing Machine 500N Year of manufacture: 2016 | Xforce P / testXpert II For sale is a high-quality material testing machine from Zwick/Roell, model 500N. This system is ideally suited for tensile, compression, and material tests in the lower force range, and is typically used in laboratories, quality assurance, research & development, as well as in the plastics and packaging industries. The machine is equipped with an Xforce P load cell (20 N) and is operated via the proven testXpert II software (version 3.71). The software enables professional data analysis, including graphical representation and test reports. Applications: - Tensile tests on plastics, films, textiles - Compression tests - Tear and peel tests - Quality control and material development Technical specifications: - Maximum force: 500 N (0.5 kN) - Load cell: Xforce P, 20 N - Year of manufacture: 2016 - Power supply: 100–240 V, 50/60 Hz - Made in Germany - Incl. PC, monitor, keyboard - Stable laboratory table with drawer unit Weight: - Testing machine (without table & PC): approx. 70 – 90 kg - With laboratory table: additional approx. 40 – 60 kg - Complete system with PC & monitor: total approx. 120 – 150 kg Condition: used Scope of delivery: (see pictures) (Subject to change and errors in the technical data, details are provided without guarantee!) If you have further questions, we are happy to answer them by phone. Gedpjymmg Nefx Af Ujip

Year of construction: 2025, operating hours: 50 h, condition: like new (used), functionality: fully functional, DSC 300 Caliris® Select - Dostosowany do potrzeb użytkownika W Select wersji DSC 300 Caliris®istnieje możliwość wyboru pomiędzy trzema aktualnie dostępnymi modułami. Maksymalny zakres temperatur dostępny w DSC 300 Caliris® Select wynosi od -170°C do 650°C. Wersja Select umożliwia wymianę modułów tego samego typu, co pozwala uniknąć przestojów urządzenia. Posiada zintegrowany kolorowy wyświetlacz dotykowy, pasek stanu LED i może być opcjonalnie wyposażony w automatyczny podajnik próbek. DSC 300 Caliris® Select to kompleksowe, niezawodne i wszechstronne urządzenie DSC do charakteryzacji materiałów, dostosowane do indywidualnych zastosowań. Niezależnie od tego, czy chodzi o badaniaarch & development, kontrolę jakości, testy kontraktowe czy specyfikację materiałów do określonych zastosowań, ważne są informacje o zachowaniu materiału w zmiennej temperaturze i różnych atmosferach. DSC 300 Caliris® może w tym pomóc: Identyfikację materiału Optymalizację procesu Kontrola jakości Diagramy fazowe Giodpoymd Iqefx Af Uop Analiza kinetyczna Kompatybilność

Condition: excellent (used), Weiss Model: WK 5/55-120 Weiss Technik Climate Test Chamber WK 5/55-120 -55°C to +120°C / 5 m³ | Year of manufacture: 2016 The system is water-cooled, high-performance, and designed for continuous professional operation. For sale is a professional climate test chamber from Weiss Technik, model WK 5/55-120, manufactured in 2016. This unit is ideal for temperature, climate, and material testing in industrial, research, and development applications. With a temperature range from -55°C to +120°C and a humidity range from 10–95% RH, the chamber covers a broad range of testing scenarios. The spacious test chamber of approximately 5 m³ allows for testing of larger components or assemblies. Gedpfx Afjymdc Ij Ueip Technical highlights: - Temperature range: -55°C to +120°C - Climatic range: 10–95% RH - Heating/cooling rate approx. 1.5 K/min - Requires water cooling Technical data: Manufacturer: Weiss Technik GmbH Model: WK 5/55-120 Year of manufacture: 2016 Dimensions / Volume - Test space volume: approx. 5 m³ - External dimensions (W×D×H): approx. 1900 × 4410 × 2621 mm - Internal dimensions (W×D×H): approx. 1600 × 1700 × 2000 mm Temperature range: -55 °C to +120 °C - Heating/cooling rate: approx. 1.5 K/min - Climatic range: 10 – 95 % RH - Dew point range: +4 °C to +85 °C Electrical data: - Mains connection: 3/N/PE AC 400V ±10% 50Hz - Rated power: approx. 47 kW (depending on configuration) - Rated current: 71 A - Customer-side fuse: 63 A Cooling water: - Water cooling required - Maximum cooling water consumption: approx. 7 m³/h - Inlet temperature: approx. 20 °C Noise level: approx. 76 dB(A) Weight: approx. 4,600 kg Scope of delivery: - Weiss Technik climate test chamber WK 5/55-120 - Control system - Operating manual (German) - Nameplate & documentation Condition: used Scope of delivery: (see photo) (Subject to change and error in technical data! All information provided without liability.)

Condition: excellent (used), Binder Model: FD 53 Binder drying oven, warming cabinet Warming cabinet with forced convection External dimensions (housing): Width (mm) 635; Height (incl. feet/casters) (mm) 620; Depth (without connections and attachments) (mm) 575; Depth (with connections and attachments) (mm) 690 Internal dimensions: Width (mm) 400; Height (mm) 400; Depth (mm) 340 Internal chamber volume (l) 53 Load per shelf (kg) 15 Permissible total load (kg) 40 Weight (empty) (kg) 44 Temperature range: approx. 5 °C above ambient up to (°C) 300 Electrical Data: Rated voltage (±10 %) 50/60 Hz (V) 230 5.3 A Rated power (kW) 1.2 Energy consumption: at 70 °C (W) 172 at 150 °C (W) 429 Gjdpfx Asyma Nwef Ueip at 300 °C (W) 951 max. 300°C Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Gijdoyl T U Dspfx Af Uop Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Condition: excellent (used), Binder Model: Binder MKT 240 E3 Climate Test Chamber / Temperature Simulation Chamber –70°C to +180°C | 400V For sale is a professional environmental simulation chamber from BINDER, model MKT 240 E3. This unit is ideally suited for temperature testing in industry, research, quality assurance, as well as electronics and material testing. Features: - Temperature range approx. –70°C to +180°C - 240 L usable capacity - 400V 3-phase power supply - Power consumption: 6.5 kW - Precise microprocessor control - Low-temperature technology with R404A / R23 refrigerants - Heavy-duty industrial design - Made in Germany Technical Data: Model: MKT 240 E3 Voltage: 400 V / 50 Hz / 3~ Power: 6.5 kW Rated current: 11.3 A Max. temperature: 180°C Refrigerant: R404A / R23 Max. operating pressure: 25 bar Interior dimensions: approx. 600 x 650 x 600 mm External dimensions: approx. 925 x 1,825 x 865 mm Weight: approx. 320 kg Condition: used Scope of delivery: (see picture) (Specifications and data are subject to change and errors excepted!) Godpfx Afoylxvye Usip For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS Type: CW-60/7 Walk-in Climate Test Chamber CTS Walk-in climate chamber 7 m³ Temperature & humidity testing from -60 to 120°C Description: For sale is a professional CTS climate test chamber, type CW-60/7. This is a professional walk-in climatic and temperature test chamber designed for industrial, research, and quality assurance applications. The system simulates extreme environmental conditions to test components, modules, or complete systems under realistic stress scenarios. The climate test chamber enables: - Temperature testing from -60°C to +120°C - Climatic testing with 10–95% relative humidity - Programmable temperature and humidity cycles - Endurance stress testing - Trend recording - RS232 / RS485 interfaces - Manual or automatic program operation Particularly suitable for: - Electronics testing - Solar modules (former application) - Automotive components - Materials testing - Endurance tests Airflow management ensures very uniform temperature distribution throughout the entire 7 m³ test chamber. Technical data: Temperature: -60°C to +120°C Change rate approx. 2 K/min Humidity: 10–95% r.H. Dew point range: +5°C to +89°C Refrigerants: R404A/R23 Max. allowable pressure: 25 bar III.6 Quick Start Instructions Volume: Test volume: 7 m³ Walk-in design (walk-in) Internal dimensions: approx. 1,400 x 2,200 x 2,250 mm (W x D x H) External dimensions: approx. 4,990 x 1,851 x 2,500 mm (L x W x H) Power / Connection: 400 V, 3/N, 50 Hz Rated power: 43.1 kW Rated current: 67.5 A Protection class: IP54 Weight: 4,000 kg Condition: used Delivery scope: (see pictures) (Specifications and technical data subject to change and error!) For further questions, please feel free to contact us by phone. Godpfeylxaxox Af Ujip

Condition: excellent (used), CTS Model: CTS CW+40/7/7 Walk-In Climate Chamber CTS Walk-In Climate Chamber 7 m³ Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climate-temperature test cell, CTS CW+40/7/7, industrial design. This system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles are possible. High air circulation ensures uniform climate distribution throughout the entire test area. The walk-in construction enables testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Gsdpoylmamjfx Af Ueip Rated current: 45.8 A Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm Overall external dimensions: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (overall) Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Internal chamber: Stainless steel Exterior: Coated steel panels (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle mode available Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (see image) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Condition: ready for operation (used), Door glass present Interior dimensions: Width: 340 mm Height: 355 mm Giedpfx Asyk Et Njf Uop Depth: 360 mm Rated temperature: 500° C