SSK Schrauben Schmid GmbH

Year of construction: 2023, condition: like new (used), volume capacity 1020 m³/h engine output 7,5 kW sound - pressure - turn off level ca. max. 75 dB suction power 1013 bar motor speed 2950 min-1 range L-W-H 1,25 x 1,35 x 1,5 m weight 577 kg UNUSED Delta Blower Generation 5 rotary lobe blower, type GM 14 L, design B3, size 132 S. Efficiency class IE3. Siemens motor with 3 built-in temperature sensors, soundproof enclosure. Suction pressure 1,013 bar. Volume flow in positive pressure operation 1,020 m³/h Volume flow in negative pressure operation 1,080 m³/h Another identical device is available for the same price. The devices were unpacked and left running for a maximum of one hour until it was determined that they were too small. New, larger ones were then ordered. Sound enclosure made of galvanized sheet steel with oil drip tray. Painted in RAL 5001 color / front elements in RAL 7047. Segmented design with interior lining and forced ventilation. Fan impeller driven by blower shaft; no additional auxiliary drive required. Sound enclosure suitable for installing multiple units side by side. Transport by forklift is possible. Sound enclosure for outdoor installation, 63 mm diameter pressure gauge with connectors, maintenance indicator, and filter monitoring. The versatile compact units of the Delta Blower series are suitable for indoor or mobile installations. Applications: Iodpfxsxfwbme Afisih Water and wastewater treatment Pneumatic conveying of bulk materials Aeration Backwashing of filters Gas extraction Degassing Dust removal Negative pressure generation Biogas upgrading and many more.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Iodjxfrv Espfx Afioih Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: good (used), Elektror Side Channel Blowers RD-82 + RD-74 General Description The Elektror RD-82 and RD-74 are powerful side channel blowers designed for industrial use. They feature a compact design, high operational reliability, and maintenance-free continuous operation. With their robust construction, they are ideal for conveying air and neutral gases—anywhere reliable vacuum or overpressure is required. Technical Data (model-dependent) Ijdsxazc Djpfx Afioih Manufacturer: Elektror Airsystems Models: RD-82 + RD-74 Machine type: Side channel blower / radial fan Design: robust, low-maintenance, suitable for continuous operation Conveying medium: air and neutral gases Typical performance: depending on model, approx. 0.85 – 3.5 kW (please add exact figures if available) Pressure range: vacuum and overpressure applications Special Features • Very quiet operation • Oil-free and maintenance-free • High energy efficiency • Ideal for continuous duty • Universally applicable Applications The RD series from Elektror is used, among others, for: • Vacuum technology • Extraction and filtration systems • Pneumatic conveying • Packaging and food industry • Plastics and paper processing • General industrial air supply Conclusion With the Elektror side channel blowers RD-82 and RD-74, you get robust and reliable blowers for a wide range of industrial applications. Both models stand for high quality, low operating costs, and long service life.

Year of construction: 2025, condition: new, New OS-40-NX Nitrogen PSA Generator with the delivery for 43.9 Nm³/h at 6 bar (g) and a purity of 99.9 % (Other interpretations on request) Requirements for the compressed air supplied on site: Volume flow 2.5 m³/min Pressure >8 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 43.9 Nm³/h Nitrogen pressure: 6 bar (g) Purity: 99.9% Equipment: Nitrogen Generator OS-40-NX Compressed Air - Pressure Dew Point Sensor Compressed Air - Pressure Sensor Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors. Iijdpfsw Dqdbox Afioh

Condition: excellent (used), Screw compressor VARIO 5-22 ALUP KOMPRESSOR (VARIO TR11) (2785840001) Iiodpfjwudv Sex Afijh Year of manufacture: 2006

Year of construction: 2025, condition: new, New OS-225-NX Nitrogen PSA Generator with the delivery for 505.2 Nm³/h at 5 bar (g) and a purity of 98.0 % (Other interpretations on request) Requirements for the compressed air supplied on site: Volume flow 20.21 m³/min Pressure 7 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Specification of Nitrogen Obtained: Volume: 505.2 Nm³/h Nitrogen pressure: 5 bar (g) Purity: 98.0% Equipment: Nitrogen Generator OS-225-NX Compressed Air - Pressure Dew Point Sensor Air-Purity-Control Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping Isdpfewa I Ebex Afijih -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: used, Year of construction: 2003, Compressed air tank made of steel (galvanized) Technical dimensions / data: Available quantity: 1 Volume: 5000 liters Type of tank: pressure tank Outer diameter: 1400 mm Cylindrical height: 2870 mm Total height: 3710 mm Type of operating pressure: overpressure Operating pressure: 11 bar Iijdpfx Aev Hmd Djfioh Operating temperature: -10 / +50 °C Equipment: Top: 2 x crane eyes 1 x ventilation Shell: 1 x manhole 2 x 2" socket 1 x 1 1/2" socket 2 x DN 80 flange socket Bottom: 3 x pipe feet 1 x 3/4" socket on the outlet For further equipment, see photos

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Air dryer AGRE KOMPRESSOREN ADD 3000 (18) – 13 bar | 11.18 kW | 2012. I will sell an industrial air dryer AGRE KOMPRESSOREN ADD 3000 (18), manufactured in 2012. The device is an ideal solution for compressed air systems, ensuring effective moisture removal and improvement of air quality in pneumatic installations. Technical data: ✅ Model: ADD 3000 (18) ✅ Manufacturer: AGRE KOMPRESSOREN GmbH (Austria) ✅ Year of manufacture: 2012 ✅ Weight: 550 kg ✅ Power: 11.18 kW ✅ Voltage: 400 V / 50 Hz / 3 phases Iiedpsv Dr I Asfx Afioh ✅ Working pressure: 13 bar ✅ Maximum pressure: 13 bar ✅ Maximum inlet temperature: 55°C ✅ Maximum ambient temperature: 45°C ✅ Refrigerant: R404A (10.5 kg) ✅ Country of manufacture: Italy Condition and use: The dryer is in good technical condition, ready to work.

Year of construction: 2025, condition: new, New OS-60-NX Nitrogen PSA Generator with the delivery for 65.0 Nm³/h at 7 bar (g) and a purity of 99.9 % (Other interpretations on request) Requirements for the compressed air supplied on site: Volume flow 3.7 m³/min Pressure 9 bar (g) Temperature: + 10°C to +50°C Compressed air quality according to ISO 8573: 1.4.1 Iisdpfx Aovyq S Ssfish Specification of Nitrogen Obtained: Volume: 65.0 Nm³/h Nitrogen pressure: 7 bar (g) Purity: 99.9% Equipment: Nitrogen Generator OS-60-NX Compressed Air - Pressure Dew Point Sensor Compressed Air - Pressure Sensor Siemens S7 Touch Control Panel Flow Meter -Inlet and outbound filtration Purity Sensor & Analysis -Stainless steel piping -Input and output controls -Output needle valve (flow regulator) -Output pressure sensor -Multi-language touch control panel -Working hours display Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: new, The Airtac MSI25X125CAGLB is a doppio-effect pneumatic cilindro designed for industrial applications that are rich in precision and affidabilità. With a 25 mm alesaggio and a 125 mm corsa, the cilindro offers a fluid and controlled movement, ideal for automatizzati systems and production lines. Realizzato di materiali di alta qualità, garantisce una lunga durata e prestazioni costanti costanti anche in ambient lavoro impegnativi. Inoltre, dotato di caracteristiches avanzate as un ammortizzatore regolabile e una guida lineare per migliorare l'efficienza operativa. Ijdsugi H Ajpfx Afieih

Condition: new, minicylinder Iijdpfjuadywex Afioh

Condition: new, minicylinder Ijdpfx Asuadydsfioih

Condition: not inspected (used), functionality: unexamined, From stock clearance: Festo DNC-50-545 PPV-A with signs of wear due to storage Ijdpfx Afsq Htd Usieih untested 11 pcs. available

Condition: good (used), Siemens radial fan with 400V motor Siemens radial fan Pulley broken 400V motor Dimensions: HxDxW 1020 x 1190 x 830 Outlet: 74 x 72 cm Iisdpoqbq Naefx Afish Fan: 40 cm ⌀ Find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Festo Didactic Mobile Pneumatic Board Mobile base units with pump unit and oil pan Festo Didactic Hydraulics learning system and service for training and continuing education Modular workstation system for training and continuing education. With many practical details that facilitate teaching and learning. Without effort and without the need for additional tools, all elements are easily and securely attached to the profile plate using hammer nuts or the patented Quick-Fix quick-mounting system. A mounting system for all technologies and applications. The torsion-resistant construction and high-quality coating ensure a long service life despite heavy loads. The lockable containers are equipped with full extension and a pull-out lock. Each drawer can hold up to 20 kg. Dimensions: 1900 x 860 x 1860 mm (HxWxD) Iisdpfx Afjnfu N Nsijh Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, * Pneumatic valves suitable for WEINIG type UNIVAR 10 or similar * Standard actuation on both sides or spring return * Number: 27, Price per piece: €25.00 + VAT. Iijdolkckqspfx Afish

Condition: used, Bosch valve coil 1824210059 Iiedpfx Aelkchkjfieh * 2 pieces.

Condition: as good as new (ex-display), Festo pneumatic cylinders RA1941 Manufacturer: Festo cylinders Some still Orginalverpackt alongside prices are per piece. 8 x ADVU-25-10-P-A 86,39€ 7 x ADVU-40-15-P-A 128,46€ 8 x ADVU-40-20-A-P-A 131,49€ 4 x ADVU-25-20-A-P-A 89,60€ 8 x DNC-63-160-PPV-A 198,00€ 1 x DNC-50-125-PPV-A 165,03€ 7 x DNC-40-80-PPV-A 139,50€ 1 x DNC-40-200-PPV-A 149,01€ 2 x DNU-32-50-PPV-A price on request 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A 624,99€ 1 x FENG-40-200-KT 474,99€ 4 x DMM-25-15-P-A 46,38€ 1 x DFM-32-50-PA-GF 228,55€ 8 x DNC-32-40-PPV-A 120,54€ 1 x DNC-32-50-PPV-A 121,15€ 10 x DNC-32-80-PPV-A 122.93€ 10 x DNC-40-50-PPV-A 137,13€ 3 x DNC-50-80-PPV-A 160,87€ 2 x DNC-50-50-PPV-A 157,85€ 5 x DSNU-25-25-PPV-A 43,28€ 4 x ESNU-25-20-P-SA Price on request 1 x DSNU-25-10-P-A 36,59€ 2 x DSNU-20-20-P 34,65€ 1 x ESNU-16-25-P Price on request 1 x DSNU-20-20-P-A 34,65€ 1 x DSNU-20-50-PPV-A 40,77€ 2 x DGPL-40-450-PPVA-KFB price on request Iiedpfx Afek Abl Neioh 7 x DNC-40-500-PPV-A 172,76€ 7 x DSNU-32-80-PPV-A 52,08€ 4 x DSNU-32-60-PPV-A 57,12€ 6 x DZF-25-12-A-P-A 110,52€ 1 x DZF-32-A-?-A price on request 2 x DZF-32-125-P-A-SA 126,57€ 2 x DSNU-25-125-PPV-A 45,05€ 1 x DSNU-25-125-PPV-A+2 SENSORS 101,30€ 1 x DSNU-25-300-PPV-A 48,35€ 1 x DNC-63-160-PPV-A-KP 815,28€ 2 x DNC-63-160-PPV-A 198,01€

Condition: new, Model: dtrans p30 Iiedoh Rul Eepfx Afijh Modified Item: No MPN: 404366/000 Country/Region of Manufacture: Germany Custom Bundle: No Brand: Jumo UPC: Does not apply

Condition: new, Elster SM-RI-X-E G1600 Turbine gas meter Elster turbine gas meter SM-RI-X-E-G1600-200-98.5-K (170) Iijdpfx Afsd I Tz Tsieh Qmax: 2500 m³ / h Qmin: 130 m³ / h pmax: 89.5 bar No: 10520813-2014 Pulse generator HF2 162.370 Imp / m³ Manufacturer price: 21.540, - € net More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Emulsion splitting plant, oil-water separation system The inexpensive and permanently reliable The solution to the problem is usually the oil / water Separation for dispersed condensates. The purified water meets the legal Sewer discharge regulations -Dimensions: 500 x 1000 mm Iiodpfx Afob A I Dvoijh -Weight: 50 kg

Condition: good (used), Emulsion splitting plant, oil-water separation system The inexpensive and permanently reliable The solution to the problem is usually the oil/water Iedpfxeb A Ib He Afijih Separation for dispersed condensates. The purified water meets the legal Sewer discharge regulations