Treppenbau Plath GmbH

Condition: good (used), Year of construction: 1992, For sale is a fully functional, robust agricultural drying line that was recently used successfully for the efficient drying of sawdust. The system is ideally suited for sawmills, pellet and biomass producers, or agricultural service providers. Versatile application: Optimized for sawdust and wood flour, also suitable for straw, grain legumes, or specialty crops. Reliable technology: Solid machine construction quality, designed for continuous operation and high throughput. Energy-efficient: Well-designed airflow for optimized heat consumption. Condition & availability: The system is in well-maintained, operational condition and can be inspected while powered on after prior arrangement. Dedpsz I Efpofx Ailjku

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Dedpfjz I Dziox Ailoku Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: used, Year of construction: 2022, functionality: fully functional, total length: 14,000 mm, total width: 2,500 mm, total height: 2,500 mm, overall weight: 5,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, MAGNUM LABORA ROTARY DRYER + 750 kW FURNACE – CAPACITY up to 1 t/h For sale: a complete Magnum rotary dryer from Labora, along with a 750 kW furnace, designed for drying sawdust and biomass. Dkjdpfx Asz Iq Rkeilsu Dryer capacity: up to 1 t/h of dry material, depending on the moisture content of the input material and the required final moisture content. The dryer is complete, installed, and operational. It is possible to view the equipment in operation on November 15th. After this date, it will be dismantled due to the installation of a larger dryer. The installation includes, among other things: - Magnum Labora rotary dryer, - 750 kW furnace, - raw material feeding and shredding system, - fan and exhaust and chimney system, - dust collection and steam extraction system, hot air discharge system, spraying system, - automation system with control cabinet, - temperature measurement and process monitoring, CO detection The installation is used for drying wood sawdust for pellet production. Sale includes the complete set, including the furnace and the raw material shredding mill. I can send a video of the equipment in operation via WhatsApp. Price: 350,000 PLN net Location: West Pomeranian Voivodeship

Condition: good (used), Year of construction: 2011, sawdust dryer capacity: 400 kg/hour prices in thousands (currency unspecified): Djdpjz E A Trsfx Aileku Dryer 35 Crusher/hammer mill 7 Boiler for wood waste 5 Feeding screw conveyor, 6 m 3.8 Belt conveyor, 2 units 2.6 Sorter with hopper 4.5 Screw conveyor, 6 units 6.6 Exhaust fan with cyclone 1 Hopper with drive, 2 units 6 Packing machine 3.5 Tank for wet sawdust 1 Fuel tank 1

Condition: used, Year of construction: 2018, machine/vehicle number: 505, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 11,700 mm, inner dimension width: 1,300 mm, inner dimension height: 2,350 mm, total length: 13,130 mm, total width: 2,840 mm, total height: 2,900 mm, overall weight: 6,600 kg, Equipment: CE marking, documentation/manual, We are selling our drying container, manufactured by Eberl Drying Systems. The system features an infeed device with radio remote control. The stacking dimensions are: height 2200 mm, width 1250 mm, length 11600 mm. The system has radio-controlled measuring points and is controlled via the Eberl drying program. Dkedpfxez Dtuks Ailsu

Condition: used, Year of construction: 2004, Continuous drying machine Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 Technical specifications - Total connected power: 23 kW - Usable width of the pallets: 1300 mm - Usable length of the pallets: 7100 mm - Total number of pallets: 24 - Infeed/outfeed speed of the workpieces (adjustable via inverter): 2-20 m/min - Max. workpiece thickness: 200 mm Dodpez A S Imsfx Ailsku - Max. load-bearing capacity per pallet: 150 kg Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1984, functionality: fully functional, power: 4.2 kW (5.71 HP), inner dimension length: 5,300 mm, inner dimension width: 750 mm, inner dimension height: 620 mm, control type: manual, actuation type: electric, fuel type: electric, Equipment: documentation/manual, We are offering this used Lauber I S-6 chamber dryer for drying wood, manufactured in 1984. Dimensions of the stacking chamber: 530 cm long, 62 cm high, 75 cm wide, 2.4 cubic meters, 4.2 kW. Dodpfx Aisz Alhielsku Cabinet with side carriage: complete dryer with carriage, high-performance radial fan, electric heating, intake and exhaust flaps, safety thermostat, spraying device, sufficient number of corrugated stacking strips, access doors, internal rails made of aluminum casting, external rail with plastic coating, manual control type A, built-in measuring unit with two wood moisture sensors and one climate sensor. Fully automatic temperature and climate control of the entire drying process according to the pre-selected drying gradient, with two wood moisture sensors and one wood equilibrium moisture sensor. If you have any questions or require further information, please send us a message or call us. Inspection is welcome. Sale only to buyers who collect the item themselves! The sale is made with the exclusion of any warranty.

Condition: used, Year of construction: 2000, functionality: fully functional, operating hours: 0 h, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 60 °C, inner dimension length: 12,500 mm, inner dimension width: 1,750 mm, inner dimension height: 2,000 mm, total length: 13,000 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Good convection drying chamber with axial airflow, fan, and heating coil at the top and rear. Can be inspected at any time. Functional. Dkjdpfxozz Sapj Ailou

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: Eberl dryer. Dsdpfx Aszz A Speileku For more information, call 504-551-431.

Condition: used, Second-hand New eco-tec ALLin DRYer belt dryer for drying wood chips for the production of briquettes. Djdpfxezzk H Uj Ailjku Possible products: Separated fermentation substrate (fine-textured, air-permeable, frost-free, free from foreign matter, fully fermented; base material: maize silage, slurry, cereals, ≥30% dry matter) Wood chips G30 (free-flowing, air-permeable, frost-free, > 0°C, low in resin, free of coarse material, free of foreign matter) Technical data: - Heating medium: Hot water 90°C flow / 70°C return - Heating capacity: ~ 400 kW - Drying temperature: approx. 80 °C at 90° flow - Weight: ~ 12 t

Condition: used, Year of construction: 2003, functionality: unexamined, power: 400 kW (543.85 HP), temperature: 95 °C, number of chambers: 2, For sale are 2 dismantled drying chambers. Designation: ZLSM-5x1.20-1x3.10-07.72-2-F The drying chamber was designed for drying wooden pallets. Internal length: 8x0.90m + 0.52m Stacking depth: 5x1.20m + 4x0.10m Stacking height: 1x3.10m + 1x0.10m + 0.40m Heating capacity per chamber: 400kW The parts shown in the photos are still available. - Various sheet metal and frame parts - Mühlböck MB4000 control system - 2 sliding doors, each approximately 3.6x7.7m; the buyer must arrange for transportation in advance - 4 heating coils with dimensions 1.30x3.65m - 8 fans, each with 3kW, internal diameter 0.8m, air flow 27500m³/h The insulation has already been removed. Dkodpfxszyk D Do Aileu The drying chamber is sold as defective and incomplete. Inspection is absolutely necessary!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Dkjdpszw Apgsfx Aileu Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: excellent (used), Year of construction: 2018, Technical equipment of an industrial wood drying plant for sale For sale is the technical interior equipment of an industrial wood drying plant. The technical components are being sold without the chamber building or structural shell. Equipment / Scope of supply: * 16 measuring units * 12 fans/blowers with heat exchangers * Fan diameter: approx. 2.60 m * Heat exchanger dimensions: approx. 1.35 m width × 3.10 m height * 24 fan motors, each with 4 kW power * Total installed motor power of the fans: 96 kW * Complete control and regulation technology * Control computer with Viso+ Dedpfx Ajzwb Dvjiloku * Supply and exhaust air technology * Other technical components belonging to the drying plant The equipment comes from a professional wood drying plant and is suitable for reuse, expansion, or modernization of existing drying chambers, as well as for the construction of new drying chamber systems. The technical drying equipment, including fan, heat exchanger, exhaust air, and control technology, is being sold – without the chamber building.

Condition: used, functionality: fully functional, Honeycomb machine Honicel DEX3: - Fully functional - Has not been in operation for approximately 1 year, but was reliably used to heat paper honeycomb for 2 years prior. - Maximum workpiece width: 1200 mm - Workpiece thickness: 90 mm Dkodpfx Ajzv Sz Aeilsu - Weight: approx. 1.1 t Perfectly suited for removing moisture from paper honeycomb and solidifying the honeycomb structure for further processing.

Condition: used, Year of construction: 2021, - Number of chambers: 3 - Volume per chamber: 90 m3 - Chamber size: 9.6x7.3x4.1 m - Final moisture content: 10 +/- 2% Dkedpfszu Amaex Ailju Drying chamber Manufacturer: BigonDry Type: Mod.LEM96.73.41 Year of manufacture: 2021 Technical data - Number of chambers: 3 - Volume per chamber: 90 m3 - Chamber size: 9.6x7.3x4.1 m - Overall chamber dimensions: 10.2x7.5x5.4 m - Type of hardwood - Final moisture content: 10 +/- 2% - Drying package: 4.5x1.2x1.2 m - Substructure: Aluminum - Wall insulation: Aluminum cassettes plus 100 mm glass wool - Sliding door: Aluminum plus 100 mm mineral wool - Front unloading - Ventilation: 900 mm - Ventilation power: 3 kW - Nominal air volume: 36000 m3/h - Hot water temperature: 90-95 C - Heating capacity: 380000-190000 kcal/h - Roof fans: 2+2 - Spray water pressure: 80 bar - Intermediate ceiling: Aluminum - Inspection doors - Wind resistance: 110 km/h - Snow load: 200 kg/m2 - Control system: Fully automatic control unit VENUS 2500-24F-PRO - Noise level: 68-70 dBA - Digital sensors - Total power: 18.5 kW - Power supply: 400v/50Hz Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 060308, functionality: fully functional, power: 6.9 kW (9.38 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 40 °C, number of chambers: 1, control type: PLC-controlled, Equipment: CE marking, documentation/manual, GIARDINA MOS® 3D Static Microwave Drying Chamber Professional static drying system designed for the drying of coated wooden components, particularly for water-based coatings. The GIARDINA MOS® 3D technology uses microwave energy for controlled and homogeneous three-dimensional drying. After removal of the water component from the coating, a low-temperature hot-air circulation phase completes the drying and curing process. The system is suitable for three-dimensional and assembled wooden components, including furniture, chairs, window and door components, profiles and turned parts. Technical data: Manufacturer: GIARDINA FINISHING S.r.l. Model: MOS® 3D Year of manufacture: 2006 Serial number: 060308 Electrical power: 6.9 kW Supply voltage: 400 V Frequency: 50 Hz Rated current: 19 A PLC controlled Air recirculation motor: 3 kW / 4 HP CE marked Dodpfx Aoztvf Tsileku Original operating and maintenance documentation as well as electrical diagrams are available. The machine was recently taken out of production and is currently dismantled and stored in a dry warehouse. It was in regular operation prior to being taken out of service.

Condition: ready for operation (used), Year of construction: 2007, A 4-level vertical dryer Giardina with a paternoster system for water-based and solvent-based coatings with flash-off, heating and drying zones is available. Workpiece length range: 300mm-3200mm, workpiece width range: 0mm-1350mm, workpiece height range: 0mm-80mm, working height: 950mm, door arrangement: vertical, number of doors: 16, number of trays: 66, levels: 4, accessibility: all sides, number of heating coils: 3. Machine dimensions X/Y/Z: approx. 5350mm/7550mm/6550mm, electrical cabinet dimensions X/Y/Z: 2500mm/500mm/2000mm. Documentation available. An on-site inspection is possible. Djdpfx Aszqu Hkeilsku

Condition: excellent (used), solid fuel furnace for supplying heat to the drying chamber. production of heating pellets. Dedpfxjzn Au Rs Ailoku capacity: 2.5 tons per hour.

Condition: new, Year of construction: 2024, I sell the wood drying chamber Logosol WDU Including humiditiy measuring unit Elbez WHT 740 Machine NEW, not used before ! Available immeditely. Djdpfx Aiszkb Riolsku

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 17,000 h, power: 7 kW (9.52 HP), temperature: 70 °C, inner dimension length: 6,000 mm, inner dimension width: 2,800 mm, inner dimension height: 2,500 mm, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, Incoplan DRY 6 model for sale. Capacity: 14-20 m3. Maximum wood length: 6000 mm. Bundle dimensions: 6000 mm x 120 mm x 120 mm. Number of bundles in the drying kiln: 4. Accessories: 8 m high chimney, manufactured in 2018. 2000 L hot water tank, manufactured in 2018. 100 kW wood-fired boiler, manufactured in 2000. Dsdeziwq Nspfx Ailoku The demolition is the responsibility of the buyer or seller, as agreed.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Hot water 90°C More technical details available on demand. Dksdozg Iw Ispfx Ailju On site inspection and testing are possible.

Condition: used, Capacity for sawn timber: approx. 1 m³, max. sawn timber length: 5000 mm. Tank capacity: 1925 l External dimensions: 620 x 100 cm Djdpfjzda D Aex Ailsku Heated with hot water.

Condition: good (used), Year of construction: 2003, functionality: fully functional, inner dimension width: 1,300 mm, total length: 6,000 mm, total width: 1,900 mm, Used for cooling after painting/coating processes where the paint/coating has been heated during drying. Dedpfx Aszbau Nsileku

Condition: good (used), Year of construction: 2000, functionality: fully functional, inner dimension width: 1,100 mm, total length: 10,000 mm, total width: 1,900 mm, Equipment: CE marking, Drying oven used for lacquered and painted sheets. Dkodpozbat Eefx Ailju

Condition: used, Technical specifications: Capacity: 3 m3 Integrated pump Shelf length: 3000 mm Shelf width: 1100 mm Dimensions: Height: 2700 mm Dkedpfx Aijzabk Aoleu Width: 2500 mm Length: 4700 mm