Lanfranconi Macchine Utensili

Condition: repair required (used), Type AS - 900 Machine No. 74054 Hnsdpfx Aey St Ireg Iel Centre distance 900 mm Centre height 150 mm Max. grinding wheel 400 x 80 x 127 mm Centre height 150 mm Centre distance 900 mm ..... Condition: The machine cannot be switched on! The following applies to this machine: Condition unknown! Scope of delivery as per attached images ....

Condition: used, Year of construction: 1997, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm weight of the machine ca. 6 t Verkauf erfolgt mit Funktionsprüfung Auf Wunsch mit neuer Tischgeometrie gegen Aufpreis C-Achse zum Polygonschleifen B-Achse mit Handschwenkung Schleifscheibendurchmesser links 400mm Schleifscheibendurchmesser rechts auf Anfrage Innenschleifeinrichtung Hedoy R Ed Njpfx Ag Ienl Reitstock mit Feinverstellung

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Control Kelco 90 weight of the machine ca. 6 t Verkauf erfolgt mit Funktionsprüfung Auf Wunsch mit neuer Tischgeometrie gegen Aufpreis B-Achse stufenlos Schleifscheibendurchmesser links und rechts 400mm Innenschleifeinrichtung Reitstock mit Feinverstellung Sinuslineal am WSS Kel-Set Passive Lämgspositionierung Movomatic TMP91 Hnsdjy R Ed Aopfx Ag Ijl

Condition: ready for operation (used), Year of construction: 1994, Studer S30-1 Hodpfxjy Rmxuj Ag Ionl Year of manufacture: 1994

Condition: good (used), Year of construction: 2006, functionality: fully functional, center height: 180 mm, grinding length: 1,000 mm, grinding wheel diameter: 508 mm, grinding diameter: 350 mm, workpiece length between centers: 1,000 mm, grinding wheel width: 100 mm, !!!ATTENTION ON-SITE SALE IN 74219 MÖCKMÜHL!!! Hedjy N Tapspfx Ag Isnl External cylindrical grinding machine TACCELLA ELEKTRA 1018 MPC Internal and external grinding machine Year of manufacture: 2006 Control: Fanuc 21i Grinding diameter: max. 350 mm Grinding length: max. 1,000 mm Equipment: - 2 separate grinding spindles for internal and external grinding - Grinding spindle head manually swivellable - Internal grinding installed - Tailstock - Automatic balancing system - Probing system for workpiece length and diameter - Structure-borne noise sensor - Coolant system - Oil mist extraction Many grinding wheels and accessories included

Condition: good (used), Year of construction: 2008, functionality: fully functional, center height: 180 mm, grinding length: 1,000 mm, grinding wheel diameter: 508 mm, grinding diameter: 350 mm, !!!ATTENTION: ON-SITE SALE IN 74219 MÖCKMÜHL!!! External cylindrical grinding machine TACCELLA ELEKTRA Evo 1018 MPC Year of manufacture: 2008 Control: Fanuc 21i Grinding diameter: max. 350mm Grinding length: max. 1,000mm Equipment: - 2 grinding spindles for straight and angular plunge grinding on one shaft - Grinding spindle head manually swivellable - Prepared for internal grinding - Tailstock - Automatic balancing system - Probing system for length and diameter of workpiece Hnodpfx Agey N S Hnj Iel - Structure-borne noise sensor - Coolant system (KSS) - Oil mist extraction unit Many grinding wheels and accessories included

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Kellenberger URS175/800 (2 units) Year of manufacture: 2013 and 2014. Capacity: Centre height 175 mm; Centre distance 1000 mm; Grinding length 800 mm Accessories: Coolant system, internal coolant supply (IKZ), paper filter, MARPOSS probe, MOVOMATIC measurement control, internal grinding attachment, balancing unit, RS‑232 interface. Based on the documentation (2012 offer), I have summarised the technical data for the KEL-VISTA URS 2-3 175 / 800 GE FANUC 21i: Key Data · Centre height: 175 mm · Centre distance: 800 mm (note: 1000 mm in price list) Hnodpjy Nz E Hofx Ag Isl · Grinding length: 400 mm (note: 800 mm in another table) Connection Data · Supply voltage: 3x400 VAC / 50 Hz or 3x460 VAC / 60 Hz · Power consumption: max. 25 A · Compressed air requirement: min. 6 bar / approx. 2.5 m³/h · Coolant system: 80 l/min at max. 3 bar / 160 l/min at max. 1 bar Ambient Conditions · Room temperature: max. 40 °C · Air humidity: max. 75 % Weights & Floor Load · Weight (centre distance 800 mm): approx. 3,500 kg · Floor load: 8,000 N/m² Axes · X-axis (grinding slide): AC drive Fanuc, direct ball screw, resolution 0.1 µm · Z-axis (table): AC drive Fanuc, resolution 0.1 µm · Swivel range (table): 6° for 175/800 Grinding Head (Type URS) · Wheel dimensions: 450 x 63 x 203.2 mm (right) · Tool holder taper: 1:10, Ø 63 mm · Drive power: 6.0 kW · Speed range: 875 – 1,900 rpm · Peripheral speed: max. 40 m/s (T2: v constant) · Swivel system: Hirth toothing (1° indexing), swivel range -210° / +10° · Internal grinding device: belt-driven, own water-cooled motor (stepless) Workpiece Spindle (Standard) · Mount: MK 5 / external taper DIN 55026 size 5 · Roundness (plunge grinding): Delta R < 0.4 µm · Capacity in overhung position: 100 Nm, max. 80 kg · Capacity between centres: max. 100 kg · Speed range: 1 – 800 rpm (AC drive, programmable) · Positioning accuracy: < +/-0.5° · Swivel range: -10° / +100° Tailstock (Note) · Quill riveted, in preloaded ball guides · Hydraulic or pneumatic tailstock pressure selectable Control · Type: GE FANUC 21i (3-axis CNC, conversational support)

Condition: excellent (used), Jones & Shipman 1076 Universal Cylindrical Grinder Capacity 10" x 27" Hydraulic Feeds Hnedpfx Agoy Nzxys Ijl Swivel Wheelhead Variable Speed Swivel Workhead Serial Number BO 94944 Plunge & Intermittent Feeds Internal Grinding Spindle Low Volt Light Coolant Note: External Guards and Extraction not included

Condition: used, External/Internal Cylindrical Grinding JONES-SHIPMAN type 1310 Capacity: Ø 200 x 450 mm (8'' x 18'') Hnsdey Nzhzspfx Ag Iel Tilted table Grinding wheel: Ø 300 mm x thickness 25 mm x bore Ø 125 mm Drive wheel speed: 1750 and 2300 RPM Rotary grindstone holder support Supplied without internal grinding spindle Equipped with 1 lubricant tank Voltage : 380 V Length: 1800 mm Depth: 1600 mm Total height: 1900 mm Weight: approx 2 T

Condition: used, Year of construction: 1989, Technical details: Hnjdpfx Asy Nk Hmjg Isl grinding diameter: 300 mm grinding length: 540 mm centre height: 175 mm total power requirement: 20 kVA centre distance: 1000 mm

Condition: excellent (used), with internal grinding attachment Center height 125 mm Distance between centers 1000 mm Table size 1650 x 145 mm Grinding wheel 400 x 50 x 127 mm Grinding wheel speeds 1'500 - 2'200 rpm Grinding head turnable 270° Grinding wheel 225 x 20 x 76.2 mm Misc. accessories MARCELS MASCHINEN AG Hnsdpfx Aey H Dq Heg Ijl

Condition: used, KARSTENS K11-1000 Hnedpfx Agey Ezbtj Isl USED CONVENTIONAL CYLINDRICAL GRINDING MACHINE FUNCTION TESTED Function tested, machine is powered and can be inspected under power. Technical specifications: Distance between centres: 1000 mm Centre height: 180 mm, Grinding diameter: 360 mm Grinding spindle motor: 4 kW Workpiece spindle motor: 0.55 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 liters Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle head for quick and safe positioning to the grinding location. Fully automatic operation, feed motion selectable via rotary switch: Rapid advance, rapid retraction, grinding mode, feed stop, micro-meter feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding positions Workpiece spindle head with infinitely variable drive for both rotating and lockable spindle. Internal grinding attachment Face grinding attachment

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Lizzini IG-FL in as-new condition: - Year of manufacture: 2019 - Siemens control system - 2 external grinding wheels - 1 internal grinding spindle - C-axis Hjdpfx Ajy Em Tnog Ionl - CNC-controlled B-axis Suitable for capto grinding (non-cylindrical/irregular shapes) Centre distance: 1000 mm Centre height: 200 mm

Condition: used, Year of construction: 1999, functionality: limited functionality, CNC Cylindrical Grinding Machine for Sale – STUDER S40 (1999) We offer for sale a STUDER S40 cylindrical grinding machine, year of manufacture 1999. Hnsdpfsy Elz Djx Ag Isl The machine is in working condition. It is equipped with one grinding spindle and a turret wheelhead suitable for both external and internal grinding operations, making it a versatile solution for precision machining. Control system: FANUC 16 Key Features: External and internal grinding capability Turret wheelhead Reliable FANUC 16 control system Solid and proven STUDER build quality Operator manual. Delivery Terms: EXW (Ex Works) The machine is available for inspection upon request. For more information, photos, or pricing, please get in touch.

Condition: good (used), Year of construction: 2001, Distance between centres: 600 mm Centre height: 180 mm Hnedpfx Asy Dz R Seg Ijl Max. grinding diameter: 355 mm Min/max Z-axis feed rate: 0.01 / 15 m/min Z-axis resolution: 0.5 µm Min/max X-axis feed rate: 0.01 / 10 m/min X-axis resolution: 0.5 µm Grinding wheel left side: 500 x 40 x 203 mm Peripheral speed of grinding wheel: 45 m/sec External grinding spindle drive power: 10 kW Workpiece spindle speed: 0-1000 rpm Workpiece headstock taper: MK 5 Tailstock centre taper: MK 4 Cylindricity adjustment: +10 / -4 degrees CNC control: SIEMENS 840 D Total connected load: 28 kW Machine weight: 5.2 t

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: GD12002, workpiece weight (max.): 150 kg, grinding length: 1,000 mm, grinding diameter: 360 mm, overall weight: 4,700 kg, TECHNICAL DETAILS Max. grinding diameter: 360 mm Max. grinding length: 1,000 mm Max. workpiece weight: 150 kg Hedpfx Agey A Nl Uj Ijnl MACHINE DETAILS Main drive power: 5 kW Dimensions & Weight Dimensions (L x W x H): 3,030 x 2,250 x 2,030 mm Weight: 4,700 kg EQUIPMENT PLC controlled Tailstock Work spindle Grinding spindle with flange and grinding wheel Internal grinding device Wet grinding system Electronic handwheel Work lamp Center point Chuck Manual

Condition: used, centre height 200 mm dist. between centers 1.000 mm grinding length 1.000 mm max. workpiece diameter 360 mm grinding wheel width 127 mm spindle tunring speed 1.500 U/min turning speed range - workpiece spindle 15 - 320 U/min dimensions 2,80 x 1,50 x 1,70 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. The machine has been overhauled. The guideways have been re-scraped. Hodpfx Agoy Ay N De Ionl The spindle has new bearings. The control cabinet is new. Accessories, tools, and clamping devices shown in the images are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, TECHNICAL DETAILS Hsdpfoy Abbzsx Ag Ijnl - Table dimensions : 800 X 400 [mm] - Z stroke : 390 [mm] - Maximum weight upon table : 500 [kg] - Machine weight : 3700 [kg] - Supply voltage : 380 [V]

Condition: excellent (used), After repair in 2022. Swing mm 400 Distance between centres mm 1000 Grinding wheel: diameter x hole x width mm 500 x 80 x 203 Hnsdpfxsyzpyce Ag Isl Taper in spindle Morse 5 Max. workpiece weight between centres kg 300 Grinding spindle revolutions r.p.m. 1720, 1980 Cross motion of grinding spindle mm 415 Motor output kW 9,5 Total input kVA 16 Machine dimensions: length mm 4890 width mm 2320 Machine weight kg 5150

Condition: used, Technical details: Hsdpfx Agjyzptis Ijnl grinding diameter: 250 mm grinding length: 1000 mm max. workpiece weight: 300 kg grinding wheel width: 150 mm Grinding wheel/diameter x bore x width: 600 x 305 x 80 mm folded disc width: 200 mm spindle taper: MK 5 tailstock taper MT: 5 sanding headstock rotation: 45° speeds:: 1050/1240 U/min longitudinal feed of the table: mind. 1 mm table speeds: 0,05-5 m/min traverse movement of the grinding headstock : 415 mm traverse movement of the grinding headstock with aut. infeed: 2 mm For grinding : 0,15 mm aut. infeed at table dead center: 0,005-0,05 mm for grinding : 0,0005-0,01 Self-infeed at grooving : 0,01-5 mm/min Quick adjustment of the grinding headstock : 60 mm grinding wheel motor: 19 kW total power requirement: 22 kW weight of the machine ca.: 5 t

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 31.211.014, center height: 225 mm, grinding length: 1,000 mm, grinding wheel diameter: 400 mm, grinding diameter: 500 mm, workpiece diameter between centers: 500 mm, Kellenberger UR 175x1000 CNC Kelco 70, fully functional Upgrade from 175 to 225 Machine no. 31.211.014 Year of manufacture: 1987 Hnodpfxoyyur Ij Ag Isl Prepared for internal grinding device Ball screw X-axis replaced in 2017 Axis card Z-axis replaced in 2021 Tailstock bearing renewed in 2017 Monitor renewed in 2023 Accessories: 1x grinding wheel flange left 1x grinding wheel flange right 1x centre support 1x workpiece magnet 1x paper band filter Further accessories on request No warranty, guarantee or return Available immediately, ex location Transport can be organised if required

Condition: excellent (used), functionality: fully functional, center height: 125 mm, grinding length: 600 mm, grinding diameter: 249 mm, control cabinet length: 1,200 mm, control cabinet width: 40 mm, grinding spindle speed: 1,530 rpm, control cabinet height: 1,500 mm, overall weight: 3,250 kg, For sale is a cylindrical grinding machine manufactured by Kellenberger. The machine is in very good condition. Make: Kellenberger Model: R 125x600 Technical Specifications: Centre distance: 600 mm Centre height: 125 mm Workpiece diameter: 249 mm Power requirement: 10 kW Table: Travel: 700 mm Travel per handwheel turn, coarse/fine: 20/2.5 mm Speed, hydraulically adjustable: 0.02–6 m/min Minimum reversing travel: 1.5 mm Dwell time at reversal, adjustable: 0–5 sec Swivel range: 11 degrees Cross slide: Travel with feed handwheel, coarse/fine: 220 mm Travel per handwheel turn, coarse/fine: 4/0.5 mm Rapid traverse and return, hydraulic: 50 mm Hnedpfx Aeyyn Ehsg Iel Feed, electro-mechanical with stepper motor: 0–9.99 mm/Ø Micro-stop of feed, per graduation: 1 µm/Ø Plunge grinding: Feed rate coarse/fine: 1–49/0.2–2.8 µm/sec Grinding spindle head: Grinding wheel, diameter x width x bore: 500 x 80 x 203.2 mm Motor rating: 5.5 kW Grinding spindle speeds: 1220, 1360, 1530 rpm Workpiece spindle head: Swivel range: 360 degrees Speeds, steplessly adjustable: 20–400 rpm Spindle internal taper: Morse 5 Motor rating: 0.9 kW Tailstock: Quill internal taper: Morse 3 Quill travel: 30 mm Machine dimensions: 2800 x 1850 mm Weight: approx. 3000 kg

Condition: good (used), Year of construction: 2000, Universal Cylindrical Grinding Machine Studer S30 leanPRO Studer S 30 Year of manufacture: 2000 Operating hours counter Regular maintenance intervals by manufacturer (last service 11/25, report available) Wheel change: according to manufacturer intervals Hydraulic inspection: annual check Backup battery replacement: included in Studer maintenance Control system: FANUC 16 T Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 125 mm Distance between centers: 650 mm Optional grinding cycles for increased center height Table adjustment: 11° Glass scale on X / Z axis Paper band filter unit Workpiece headstock: approx. 1-1,000 rpm Internal grinding attachment with accessories LED spotlight with flexible arm Grinding wheel: 400x80 mm Frequency converter for external grinding spindle Grinding wheel flange Bore diameter: 127 mm Frequency converter for internal grinding spindle Workpiece weight: approx. 80 kg Workpiece support with live center and MK 4 Workpiece headstock: MK 5 taper Tailstock: MK 3 taper Quill stroke: 40 mm Machine weight: approx. 3,400 kg Installation dimensions (LxW): 2,300x1,550 mm Machine height: approx. 2,000 mm Electrical supply Hnjdpfsyx Hgzjx Ag Isl Digital linear measurement system Coolant supply with fleece filter, tank capacity 300L Operating hours counter, control ON: 35,978 h

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: C210068/9002194, grinding length: 750 mm, grinding wheel diameter: 400 mm, grinding diameter: 250 mm, overall weight: 3,900 kg, grinding wheel speed: 2,640 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. grinding length: 750 mm Grinding wheel diameter: 400 mm Max. workpiece diameter: 250 mm Hsdpfx Ageyxpclj Isnl Grinding wheel speed: 2,140 / 2,640 rpm MACHINE DETAILS Operating voltage: 400 V Operating current: 16 A Frequency: 50 Hz Apparent power: 9.8 kVA Grinding spindle motor power: 5 kW Dimensions & Weight Dimensions (L x W x H): 1,950 x 2,750 x 1,750 mm Machine weight: 3,900 kg EQUIPMENT Filter unit Tailstock suitable for external cylindrical grinding

Condition: reconditioned (used), KELLENBERGER KEL-VISTA UR 175X600 is a CNC cylindrical grinder engineered for precision, high accuracy and reliability. Capacity: centre height 175 mm; between centres 800 mm; grinding length 600 mm; max Ø 349 mm; max weight 100 kg. Key specs: Z 750 mm; X 320 mm; left wheel Ø400×80×127, right Ø300×40×127; wheel speeds 875–1900 rpm (stepless); wheel motor 5 kW; work spindle 8–800 rpm (stepless), taper 5 CM; rapid 12 m/min; air 6 bar; 3×400 V 50 Hz; machine ≈3000 kg; 3200×1700×2000 mm. Accessories: coolant, coolant-through-spindle (IKZ), paper filter, MARPOSS probe, MOVOMATIC measuring control, internal grinding attachment, balancing, RS‑232. Suited for tight tolerances in automotive, watchmaking, machine tools, aerospace, medical. Hnsdpfxeyxn Iys Ag Ijl