PEHA GmbH Werkzeugmaschinen

Condition: used, L + Z lathe COLCHESTER / HARRISON Type Student VS 3000 Machine No. 306138 / 92 Year of manufacture 1995 Distance between centers 635 mm Swinging diameter over bed 330 mm Swinging diameter over cross slide 210 mm Height of centers over bed 165 mm Height of centers over cross slide 105 mm Spindle bore 41 mm Feed Longitudinal and cross Chuck mounting Short taper DIN 55029 D1-4 Camlock Ø 63 mm Tailstock spindle taper MK 3 Tailstock quill travel 100 mm Spindle speed 20 - 3000 rpm Drive power 5 kW Mains connection 400 Volt, 50 Hz - 2-axis digital display FAGOR, Type VN 300T - AINJEST quick threading device for metric threads directly on the carriage - Spindle speed via 3 gear stages and stepless via frequency converter - 3-jaw chuck with center holes RÖHM Duro Ø 160 mm with stepped jaws - Quick-change tool holder Multifix size B with 2 sets of change cassettes - Folding chuck guard with electrical monitoring - Splash guard on the back of the machine - 1 traveling steady rest - 1 fixed steady rest - 4 machine feet - 1 chuck follower Bdsdo Agw Ecopfx Apdoi - 4 change gears - Operating manual, electrical diagram and parts list available Space requirement L x W x H 1560 x 1000 x 1660 mm Weight approx. 750 kg very good condition, machine comes from the Helmholtz Institute. Lathe bed and guideways in new condition.

Condition: used, Year of construction: 2000, Weiler DA 180 / 1000 - Universal lathes - ACU-RITE position display - 3-jaw chuck, Ø 200 mm - Quick-change tool holder - Coolant system - Work area lighting - Chuck guard - Chip guard - Various tool holders and tools - Operating manual - Year of manufacture: 2000 Technical data Main spindle: - Spindle head according to DIN 55027: Size 6 - Spindle bore: 52 mm - Ø in front bearing: 83 mm - Internal taper: metric 57 - Number of speeds: 12 - Speed range: 33–1500 rpm Tailstock: - Diameter of tailstock spindle: 65 mm - Morse taper: Mk 4 - Lead of leadscrew: 6 mm - Turning tool cross-section: 20 × 20 mm Working ranges: - Swing over bed: 380 mm - Swing over cross slide: 185 mm Bsdps Agnynjfx Apdedi - Travel of cross slide: 330 mm - Travel of top slide: 120 mm - Travel of tailstock spindle: 120 mm Feeds: - Longitudinal feeds: 0.072 – 4.038 mm/rev - Cross feeds: 0.036 – 2.019 mm/rev Threads: - Metric threads: 0.5 – 28 mm - Inch threads: 56 – 1 TPI - Module threads: 0.25 – 14 - D.P. threads: 112 – 2 Electrical connection: - Drive power: 5.5 kW - Motor rated speed: 1500 rpm Dimensions: - Center height above flat guideway: 180 mm - Center height above floor: 1060 mm - Bed width: 330 mm - Machine dimensions WxHxD: approx. 2400 x 1700 x 1200 mm - Machine weight: approx. 1800 kg

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Commodor lathe with lead screw and tailstock, equipped with a 3-axis digital display Heidenhain ND780. In very good condition!!! Technical data: >> Year of manufacture 1991, Machine No. 3120 >> Center height 180 mm >> Distance between centers 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore 56 mm >> Short taper spindle head DIN 55027 size 6 with bayonet lock >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 kW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from Heidenhain ND780 Bodpfxj Agnrgs Apdjdi >> 3-jaw chuck 200 mm, 1 set of jaws >> Mulifix size B with 2 steel holders >> Drill chuck >> Bed stop >> Machine feet About the machine: Offered is a Weiler Commodor lathe in very good, fully functional condition. The machine comes from a state-owned company where it was used very little. The Commodor is one of the largest manual lathes manufactured by Weiler. A very robust and powerful machine. The 3-axis digital display from Heidenhain makes working with it even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: used, Year of construction: 1970, machine/vehicle number: 1421, Used lead screw and feed screw lathe WEILER LZ 330 Center height: 155mm Center distance: 800mm Spindle bore: 36mm Bdedpfx Aj Agnmqspdoi Spindle speeds: 30-2,050 rpm 1 x 3-jaw chuck, diameter 160mm, coolant system, bed stop, manual clamping device (pull rod) with 14 collets, chip shield, quick-change tool holder size B with 1 insert, machine light. Digital display on the X-axis. The machine has been partially overhauled and repainted. The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. An inspection of the machine can be arranged.

Condition: used, Year of construction: 2000, overall weight: 1,500 kg, This FAMOT universal lathe, type: EUROPA, will be auctioned off in our online industrial auction / machine auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. Bdedpfx Apj Agi Ipjdoi You can find this and many other items on our platform.

Condition: used, Year of construction: 2000, overall weight: 1,500 kg, This FAMOT universal lathe, type: EUROPA, will be auctioned off in our online industrial auction / machine auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. Bdjdpfx Aj Agizbjpdei You can find this and many other items on our platform.

Condition: good (used), Year of construction: 1999, functionality: fully functional, FAMOT Europa lathe – manufactured in 1999 Technical specifications: Manufacturer: FAMOT Type: Europa Year of manufacture: 1999 Turning length: 1,000 mm Turning diameter: 350 mm Spindle bore: 54 mm Spindle speed: 28–2,500 rpm Digital position display: Fagor Electrical connection: 400 V Machine weight: 1,500 kg Dimensions (L × W × H): 2,300 × 940 × 1,400 mm Bodpj Aggi Aefx Apdjdi

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B guide and pull spindle lathe with 3-axis digital display from K&C, from a vocational school. Technical data: >> Year of manufacture 1992, machine no. 92 160 3220 >> Center height 160 mm >> Center distance 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be activated >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, ABS/INC coordinate selection, halving the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeroing, switching the counting direction, >> 3-jaw chuck 160 mm with 2 sets of jaws >> 4-jaw chuck with 2 sets of jaws >> 3-jaw chuck with individually adjustable jaws >> Multifix A with 2 steel holders Bdsdpfx Aps Afyg Nedei >> Bed stop, drill chuck >> Electronic spindle protection >> Rear panel >> Coolant system >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 160 B guide and pull spindle lathe, manufactured in 1992 with toolmaker precision, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as ground. Take advantage of the opportunity to inspect this machine on-site while it is powered and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler high-precision lathe, model Condor 81, with lead and pull spindle, featuring a 3-axis digital display, Heidenhain ND780, from a training workshop. Technical data: >> Year of manufacture: 1988, Machine No. 88-955 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be activated >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital display, Heidenhain ND780 >> 1 three-jaw chuck, new, with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 collets, some in duplicate >> Mulifix size B with 3 steel holders >> Bed stop >> Machine feet >> Drill chuck >> Follower rest For safety: >> Guard for the lead and pull spindle >> 2 emergency stop buttons Bdodpfxo Afxx Ho Apdsi >> Spindle brake About the machine: For sale is a used Weiler Condor 81 lathe, manufactured in 1988, in very good condition. The machine is fully functional. The lead and pull spindle are equipped with a guard for safety. This Weiler lathe comes from a training workshop. It is a very robust and powerful machine. The 3-axis digital display from Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Weiler Praktikant 160 B, lathe with guide and draw spindle, year of manufacture 2000, with 3-axis digital display K&C, NEW, CE marking!! Technical data: >> Year of manufacture 2000, machine no. 4651 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev Bdsdpfx Aj Afxq Sopdji >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeroing, switching the counting direction >> Quick-change tool holder, collets from 2 to 28 mm, increasing in 1 mm steps >> 3-jaw chuck 160 mm Röhm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> Electric chuck guard >> Bed stop, drill chuck >> Back wall >> Machine feet >> Coolant system >> Operating manual, parts list (PDF) About the machine: Offered is a Weiler Praktikant 160 B lathe with guide and draw spindle, year of manufacture 2000, in very good condition. The machine is fully functional and has CE marking. All slides run very smoothly and evenly. The Weiler comes from a training workshop. Even at high speeds, the Weiler runs smoothly. This newer generation of Weiler lathes is very user-friendly and allows for the production of surfaces that appear to be ground. Take the opportunity to inspect this machine on site and under power to convince yourself of its condition.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, from a vocational training workshop, CE compliant, in excellent condition!!! Technical data: Bodpo Afxm Ujfx Apdjdi >> Year of manufacture: 2013, Machine no. D4D 130601 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed stages from 40-3000 RPM, infinitely variable >> Quill stroke: 120 mm >> Tailstock: MK3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint / Dimensions approx.: Length 1,600 x Depth 0.9 x Height 1.3 meters >> Weight approx.: 750 kg Accessories and equipment: >> 3-axis position indicator >> 1 three-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 four-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 quick-change tool holder without collets >> Steel tool rest with 2 pockets >> Chip guard >> Coolant system >> Bed stop About the machine: Offered for sale is an Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, in well-maintained condition. The machine is fully functional, of course. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to inspect this machine on-site while it is powered on and to convince yourself of its condition.

Condition: used, Year of construction: 2003, turning diameter over cross slide: 210 mm, spindle bore: 38 mm, turning diameter over bed slide: 330 mm, center height: 167 mm, center width: 1,000 mm, feed length X-axis: 190 mm, feed length Z-axis: 92 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 40 rpm, Centre Lathe Manufacturer: HARRISON Model: M300 Year of manufacture: 2003 Technical specifications: - Swing over bed: 330 mm - Distance between centres: 1,000 mm - Centre height: 167 mm - Spindle bore: 38 mm - Swing over cross slide: 210 mm - Spindle speed: 40 - 2,500 rpm - X-axis: 190 mm - Z-axis: 92 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if noted in the additional information. Bodpfx Aps Ad Nnasdjdi Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 1982, spindle bore: 37 mm, spindle speed (max.): 3,000 rpm, overall weight: 1,500 kg, 2-axis Sony vision system Bedps Ad Ibxsfx Apdjdi Capacity: 750 x 360 mm Spindle speed variator, maximum: 3,000 RPM Bore: 37 mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 77 mm, turning diameter: 520 mm, center height: 260 mm, turning length: 1,500 mm, feed length X-axis: 310 mm, feed length Z-axis: 1,500 mm, spindle speed (max.): 2,500 rpm, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 4 m/min, spindle mount: MK 6, EMCO LABOR E-260 SELF-LEARNING LATHE WITH FAGOR 8055 CNC, COMPLETE MACHINE WITH ACCESSORIES, MANUALS, AND CE DECLARATION CENTER HEIGHT: 260 mm DISTANCE BETWEEN CENTERS: 1500 mm MAXIMUM DIAMETER OVER BED: 520 mm MAXIMUM DIAMETER OVER CARRIAGE: 300 mm SPINDLE NOSE, CAM LOCK TYPE: 6" SPINDLE BORE DIAMETER: 77 mm SPINDLE POWER: 16.5 KW SPINDLE SPEED: 2500 RPM (2 RANGES) CNC: FAGOR 8055 MOTORS AND DRIVES: SIEMENS Bdsdps Aa Nicefx Apdoi

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, A very well-maintained machine, originally used for vocational training, with a digital display and good accessories. The machine is connected. Bedo Aa Ic Uspfx Apdodi

Condition: excellent (used), turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter: 355 mm, turning diameter over bed slide: 210 mm, turning length: 635 mm, total length: 1,605 mm, total width: 890 mm, total height: 1,195 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 22 rpm, type of input current: three-phase, overall weight: 790 kg, Colchester Student 1800 Gap Bed Lathe Model: 1800 Distance Between Centres: 635mm Swing Over Bed: 355mm Swing Over Cross Slide: 210mm Swing In Gap: 480 x 115mm Spindle Speeds: 22-1800 RPM Spindle Bore: 40mm Machine With: 3 Jaw Chuck Bsdez S Nibspfx Apdodi Quick Change Toolpost and Holders Coolant Pump & Fittings Lo-Voltage Light Dimensions: 1605 x 890 x 1195mm High Weight: 790Kgs

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, L & Z spindle lathe / WEILER CONDOR B / incl. Heidenhain 3-axis digital control - Machine from an educational institution / in perfect condition - Three-axis Heidenhain digital control - Center height 165 mm - Swing over bed 330 mm - Swing over cross slide 185 mm - Turning length approx. 800 mm - Spindle speeds (geared) 22 - 2800 rpm - Thread cutting / Metric / Inch, etc. - Bar capacity 40 mm Bdsdpfez St Iujx Apdsi - Tailstock / Morse taper MK 3 - Electric chuck guard - Multifix base holder with inserts - Three-jaw chuck Forkardt - Machine lamp - Chip guard - Bed stop - Machine feet - Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1100 kg Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, WEILER COMMODOR from vocational school / technical college - identification -Guides in good condition -Technical college identification -Good working condition -Maximum turning height 180mm -Maximum turning diameter 1000mm -Bar capacity 56mm -Speed range (gearbox) 56 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Tailstock MK4 -Three-jaw chuck approx. 200mm -ELECTRIC CHUCK GUARD -SPINDLE COVERS -2 x Emergency stop -Multifix base and inserts -Coolant system -Chip guard -Work light Bdsdpfxjz R Dn Aj Apdsi -Documentation Dimensions: L x W x H 2.5 x 1.3 x 1.7 meters / Weight 1500kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1996, greates pass round over bed 320 mm turning dia. over face-slide 198 mm centre height 160 mm turning length 650 mm spindle turning speed range max. 3.000 U/min spindle passage 40 mm tailstock quill taper MT 3 quill stroke 85 mm total power requirement 4 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1582 x 715 x 1145 m Well-maintained machine from a vocational school Accessories/Equipment: - CE marking - WEILER 3-axis digital readout - Multifix tool post - 3 Multifix tool holders Bedez Rqp Tepfx Apdjdi - KLOPFER 160 mm 3-jaw chuck - KLOPFER 160 mm 4-jaw chuck - Various sets of clamping jaws - Safety drive plate - 34 collets - Collet clamping system - Drill chuck - Live center - Various machine keys/wrenches - Machine mounts/feet - Work light - Chuck guard with electrical cut-off - Coolant pump - Operating manual and circuit diagrams

Condition: like new (used), Year of construction: 2015, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 43 mm, turning diameter: 330 mm, center height: 165 mm, center width: 750 mm, turning length: 750 mm, quill stroke: 110 mm, total length: 1,800 mm, total width: 1,200 mm, total height: 1,650 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, overall weight: 1,250 kg, Conventional precision lathe, control WEILER C3/Sinumerik 840D, center high 165 mm, between centers 750 mm, bore Ø 43 mm, speed 1 - 4500 rpm stepless, motor 9 kw, equipement: collet device, coolant device, 3-jaws chuck SCHUNK, drill chuck, tool post MULTIFIX with 6 toolholders, lamp, dimensions 180x120x165 cm, weight ca. 1250 kgs; only a few working hours Bjdjz Rpmqspfx Apdodi

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Bdjdpfx Aoz Nym Espdei

Condition: used, Parallel Lathe GEMA LZ 160 Between points: 1000 mm Maxi Ø on bench: 310 mm Maxi Ø over saddle: 180 mm Maxi diameter in brocken bed: Ø 420 mm x Length 200 mm Spindle diameterØ 44 mm Spindle speed: from 48 to 1500 RPM TRIPAN Turret Supplied with 2 tool holders 3-jaws chuck Ø 200 mm Bdsdpfxsz Iz Efo Apdsi Threadings: Metric + Whitworth Tailstock: CM3 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2100 x 800 x 1300 mm Weight: approx 1,3 T

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, L & Z lathe / WEILER CONDOR AC / Stepless speed control / FROM AN EDUCATIONAL INSTITUTION - CE marking - Year of manufacture: 2000 - Swing over cross slide: 180 mm - Distance between centers: 165 mm - Max. swing: 330 mm - Turning length: approx. 800 mm - Speed (stepless): max. 2800 rpm - Automatic longitudinal / cross feeds - Threading / Metric / Inch etc. - 3-jaw chuck - Tailstock - Chip guard Bodpfxoz Izi Dj Apdodi - Machine light - Multifix base and 6 inserts - Various change gears - Coolant system - Various operating tools - Documentation Dimensions: L x W x H: 1.8 x 1 x 1.8 meters / Weight: 1300 kg Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, L&Z Lathe WEILER LZ 330 incl. new 3-axis digital display (from an educational institution) -3-axis digital display "NEW" -Center height 165mm -Swinging diameter over bed 330mm -Turning length 800mm -Spindle speed range (geared) 25 - 2800 rpm -Automatic longitudinal / cross feeds -New Multifix base and inserts -Collet chuck and various collets -3-jaw chuck -Original copying attachment -Various accessories -Documentation Bdjdpoz Ihvkjfx Apdoi Dimensions: L x W x H 1.8 x 0.7 x 1.6 meters / Weight 800kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1988, Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Bsdpez Hylbsfx Apdedi Turning length: 500 mm Swing diameter over bed: 315 mm Maximum turning diameter over compound slide: 200 mm Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 rpm.