Werkzeughandel Süss

Condition: used, functionality: fully functional, mileage: 363,096 km, power: 331 kW (450.03 HP), first registration: 10/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Kjdpfx Ahez Dtz Do Eedt Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: good (used), Approx. 113 Corletten units, widths 1.10m / 2m / 2.70m - used: Prices per unit, ex warehouse (net): Type 1 – stackable: €79.00 Type 1 – non-stackable: €59.00 Type 2 – stackable: €79.00 Type 2 – non-stackable: €59.00 Kdsdpfxjz Dtzqj Ah Ejt Type 3 – stackable: €65.00 Type 3 – non-stackable: €49.00 Manufacturer: Cordes und Koch Type: unknown, various Year of manufacture: unknown, various Type 1: “Large variant” with dimensions 2.70m x 1.15m (width x depth) 25 units in red – almost all stackable 10 units in blue – non-stackable 2 units in green – non-stackable Type 2: approx. 24 units are stackable “Medium variant” with dimensions 2.00m x 1.15m (width x depth) 27 units in blue, 16 of which have a grating 12 units in green Type 3: at least 10 units are stackable “Small variant” with dimensions 1.10m x 1.15m (width x depth) 34 units in green 3 units in yellow Condition: used Available: immediately Location: 63128 Dietzenbach

Condition: excellent (used), Year of construction: 2018, overall weight: 50 kg, total height: 150 mm, total length: 830 mm, total width: 180 mm, Metal cutting Tooling CERATIZIT - CORALINE HDG-2 MACH-ID 9707 Make: CERATIZIT Type: CORALINE HDG-2 Year: 2018 Length:830mm Width:180mm Height:150mm Weight:50kg Length:830mm Width:180mm Height:150mm Kdsdpfsz Dtzkjx Ah Eot Weight:50kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), functionality: fully functional, machine/vehicle number: 11289, Year of construction: 2020, operating hours: 6,552 h, load capacity: 1,600 kg, fuel type: electric, mast type: triplex, gearing type: automatic, battery capacity: 750 Ah, empty load weight: 3,405 kg, Electric forklift 11289 TOYOTA 8FBM16T ✔ Fully inspected and ready for operation ✔ Technical maintenance performed ✔ Warranty provided ✔ Service and spare parts supply guaranteed Specification: Forklift type Electric forklift Product code 11289 Manufacturer TOYOTA Model 8FBM16T Year 2020 Lifting capacity, kg 1600 Mast type Triple mast Kjdpfx Ahjz Dtzde Eodt Lifting height, mm 4700 Operating hours 6552 Country Italy Weight (kg) 3405 Length x width x height, mm 2100 x 1060 x 2100 Overall height, mm 2100 Forklift attachments Side shift, Battery charger Battery 48V/750Ah

Condition: used, first registration: 02/2017, Year of construction: 2014, operating hours: 161 h, Equipment: all wheel drive, We are offering for sale, directly on behalf of the owner: Municipal tractor + accessories, used It was used very rarely, which explains the low operating hours of approximately 161, and for the first few years, it was only used internally. Therefore, the initial registration took place in 2017. The tractor comes from the inventory of an industrial company and has been regularly maintained; proof of maintenance is available. The sale is only for the complete package with all accessories. Manufacturer: HAKO Type: Hakotrac 2650 DA Power: 20 kW / 26 hp Year of manufacture: 2011 Initial registration: 2017 (Used internally within the factory for the first few years) Operating hours approx.: 161 Next TÜV inspection due: 4/27 Performance: Drive: All-wheel drive, hydrostatic, differential lock Equipment: Cab, heated MAUSER Front lift Front hydraulics Kodpfez Dty Tox Ah Eedt Front PTO Rear lift Rear hydraulics Rear PTO Accessories: - Snowplow (stored for several years) - Salt spreader RAUCH SA 250 Type 1 - Sweeper, HAKO 2GFKM LL

Condition: used, Throughfeed drying tunnel Manufacturer: Bürkle Technical data - with UV lamp - Year of manufacture estimated to be around 2000. Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding. Kedpfx Ahsz Dtyye Ejdt

Condition: used, UV drying tunnel Manufacturer: Elmag Type: Ti166-35+2iVM1-65 Technical data - Equipped with 2 UV lamps - The year of manufacture is estimated to be around 2000. Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Kodoz Dtytopfx Ah Ejdt

Condition: used, Year of construction: 2017, Overview Complete dressing line for sparkling wine in 750 ml glass bottles, rated at 5,000 bottles/h. The line runs from bottle washing and drying through capsuling and labelling to tray forming, wrap-around packing and vertical packing, linked by approximately 50 m of bottle conveyors, tray conveyors and two accumulation tables. The labelling machine dates from 2017, the packaging end from 2002 and the bottle washer-dryer from 2005. The line is still in production and can be visited on request. Technical data - Year of manufacture: 2017 (labelling machine); remaining machines 2002 to 2005 - Output: 5,000 bottles/h - Product: sparkling wine - Bottles: glass, 750 ml - Bottle conveyors: approx. 50 m total length - Accumulation tables: 2 Kdodpfx Aoz Dtymjh Eet - Electrical cabinet with power supply and automation included Scope of Delivery - Bottle washer and dryer | CAMES | WDT-12 | 2005 - Capsuling machine | Robino & Galandrino | ZENITH Z 2/16 OTTICO | 2004 - Labelling machine | Sacmi | KUBE K60 | 2017 - Tray former | CERMEX | F28.40 | 2002 - Tray former | CERMEX | F28.40 | 2002 - Bottle deviator | CERMEX | 2002 - Vertical packer | CERMEX | AN90 | 2002 - Wrap-around packer | CERMEX | WB45.00 | 2002 - Laser coder | LINX | SL301 - Hot-melt unit | Nordson - Bottle conveyors | Bobard, Thierion, Anduze | approx. 50 m total length | 2017 - Tray conveyors - 2 accumulation tables - Electrical cabinet with power supply and automation Condition In production. Inspection on site by appointment. Availability Available from 29 January 2027. Location: France.

Condition: excellent (used), functionality: fully functional, New 6 kW resonator and new cutting head to be installed by the end of 2025 Investment approx. EUR 190,000 Immediately available – inspection possible Manufacturer: Bystronic Model: BySprint fiber 3015 Year of manufacture: 2022 / new resonator and cutting head in 2025 Sheet metal format: Maximum format, 4,000 x 2,000 mm Operating hours: After upgrade at the end of 2025: approx. 1,400 operating hours, approx. 550 cutting hours Before upgrade until 2025: approx. 17,700 operating hours, approx. 7,500 cutting hours SPECIAL EQUIPMENT: - Cut Control Fiber - Part and cross conveyors in the cutting area - Dust extraction system with 200-liter drum adapter - Upgrade in 2025: 6,000-watt fiber laser with a new cutting head Standard equipment: BySprint Fiber 4020 Pallet change system with 2 pallets Enclosed housing/roof Scrap bin with rollers CNC control and cabinet Touchscreen with user interface for ByVision Operation and comfort Maintenance Messenger Restart Manager System Manager Handheld operating device ByHand Cutting parameter assistant Uninterruptible power supply (UPS) Cutting bridge OPC interface Cutting Cutting head Piercing jet ByPos Fiber Detection Eye Nozzle cleaning Scanning Fiber laser sources Tank heater Tropicalization Interface to automation/handling Cooler Operator protection in the cutting area Operator protection in the loading/unloading area Voltage 400V / 50Hz Compressed air (machine incl. laser source and cooling unit) Material specification Part tolerances and cutting surface quality Cutting gas supply and cutter quality TECHNICAL DATA: Maximum positioning speed parallel to the axes X/Y: 100 m/min Maximum positioning speed simultaneous: 140 m/min Position deviation Pa (VDI/DGQ 3441): +/- 0.1 mm Position scatter Ps (VDI/DGQ 3441): +/- 0.05 mm Edge detection accuracy: +/- 0.5 mm Maximum workpiece weight: 1580 kg Table change time: 35 seconds Laser power: 6,000 Watts Maximum sheet thickness: Kodpfx Ahez Dtygo Esdt Steel: 30 mm Stainless steel: 25 mm Aluminum: 20 mm Brass: 15 mm Copper: 15 mm Machine weight (without extraction, cooling unit): approx. 15,000 kg Machine dimensions, approx.: 13,743 mm length, 6,670 mm width, 2,565 mm height Transfer of programming software possible. This used machine can be inspected under production conditions. All information is subject to change without notice – sale excludes any guarantees and warranties. Subject to prior sale.

Condition: excellent (used), Year of construction: 2012, operating hours: 841 h, lifting height: 3,300 mm, free lift: 1,770 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, fork width: 570 mm, total height: 2,180 mm, color: other, GVW: 1.020 kg Lifting capacity: 1.200 kg Ksdpfx Ajz Dtyaeh Eodt LOW HOURS! Battery 24V 3PzV 213Ah 2025 maintenance-free, Built-in 220V high-frequency charger, Duplex-Freelift, Freelift, Fork size 1150 x 570 mm, Single fork wheels,

Condition: used, functionality: fully functional, power: 82 kW (111.49 HP), fuel type: diesel, overall weight: 22,000 kg, Year of construction: 1999, operating hours: 5,727 h, drive type: Kette, machine/vehicle number: 5963, Seat dimensions: 2,700 x 3,100 mm (W x L) Engine: Deutz / 82 kW Kdjdsz Dtxpspfx Ah Ejt Transport dimensions: 8,520 x 2,700 x 3,320 mm (L x W x H)

Year of construction: 2022, condition: used, = Additional Options and Accessories = - 2-pedal control - Airbags - Aluminum fuel tank - Anti-lock braking system - Anti-slip control - Auxiliary work lights (rear) - Auxiliary work lights (front) - Automatic transmission - Heated mirrors - Hill start assist - Bluetooth - On-board computer - Brake booster - Roof spoiler - Differential lock - Electric windows - Electrically adjustable exterior mirrors - ESP (Electronic Stability Program) - High beam headlights - Windshield - Low noise - Cruise control - Cab - Air conditioning - Air conditioning - Refrigerator - Power steering Kdjdpjz Dtxvjfx Ah Ejt - Air suspension - Air-suspended seats - Air horn - Navigation system - Fog lights - Particle filter - Radio/CD player - Rain sensor - Retarder - Sleeper cab - Hose couplings - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Immobilizer - Central lubrication system - Central locking - Fifth wheel coupling = Notes = Very nice 2022 DAF XF480 8x2 with 20-foot BDF frame, only 365,380 km, 1st axle = 10-ton axle (leaf springs and disc brakes), 2nd axle = Veldhuizen axle (steerable, liftable, air suspension, disc brakes), 3rd axle = drive axle (air suspension and disc brakes), 4th axle is a lift axle (air suspension, disc brakes, radio/CD/navigation, air conditioning, 2 beds, refrigerator, engine brake, Webasto, night air conditioning, Ringfeder trailer coupling (50 mm)), tare weight: 11,500 kg, permissible total weight: 39,000 kg, Dutch registration with valid main inspection (APK) until March 16, 2027. = Further Information = General Information Year of manufacture: March 2022 New: No Mileage: 365,380 km Cab: Sleeper cab Registration number: 28-BSR-7 Technical Information Power: 355 kW (483 hp) Number of cylinders: 6 Engine displacement: 12,902 cc Drivetrain AdBlue system: Yes Transmission Transmission: continuously variable transmission Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65-R22.5; Max. axle load: 10,000 kg; Steered; Tire tread depth left: 40%; Tire tread depth right: 39%; Suspension: Leaf spring suspension Front axle 2: Lift axle; Max. axle load: 10,000 kg; Steered; Tire tread depth left: 45%; Tire tread depth right: 60%; Suspension: Air suspension Rear axle 1: Double tires; Max. axle load: 11,500 kg; Tire tread depth left inside: 45%; Tire tread depth left outside: 40%; Tire tread depth right inside: 40%; Tire tread depth right outside: 40%; Suspension: Air suspension Rear axle 2: Double tires; Lift axle; Max. axle load: 7,500 kg; Tire tread depth left inside: 40%; Tire tread depth left outside: 25%; Tire tread depth right inside: 25%; Tire tread depth right outside: 25%; Suspension: Air suspension Dimensions Dimensions (L x W x H): 915 x 255 x 375 cm Wheelbase: 670 cm Weights Tare weight: 11,400 kg Payload: 27,600 kg GVW: 39,000 kg Environment Emission class: Euro 6 Maintenance APK (Technical Main Inspection): valid until 03/2027 Condition General condition: very good Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for more information.

Condition: good (used), Year of construction: 2010, Vertical sheet metal storage system, drawer-based sorting system for sheet metal, Hegla, 10 compartments for sheets 1.50m x 3m – used: Price ex works: €4,500 (net)! Manufacturer: Hegla Kdodjz Dtxiopfx Ah Ejt Type: SCH-SL-3 Year of manufacture: 03/2010 Maximum storage length: 3,000 mm Maximum storage height: 1,500 mm Number of compartments: 10 Load capacity: 500 kg per drawer (10 x 500 kg) Max. loading height: 1,500 mm Overall dimensions L x W x H: 3,250 mm x 1,590 mm x 1,950 mm Condition: good Available: immediately Location: 87719 Mindelheim

Condition: good (used), Year of construction: 1991, machine/vehicle number: 139607, Offer 26215 Technical Data: - Drilling capacity 28 mm - Drill spindle mounting MK 3 - Tapping thread M 12 - Drill spindle speeds: - Level 1: 120 / 215 / 360 / 600 / 1080 rpm - Level 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit with height adjustment via hand crank - Smallest / largest distance between table and drilling/milling spindle: 60 / 390 mm - Drill spindle stroke 100 mm - Fine feed adjustment of the spindle via handwheel - Drill spindle overhang 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel: - X-axis: 350 mm - Y-axis: 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Footprint: approx. W 800 x H 1800 x D 900 mm - Weight: approx. 300 kg Kdodpfxez Dtxco Ah Eet

Condition: good (used), rotational speed (max.): 2,050 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, table length: 600 mm, table width: 210 mm, Used conventional milling machine Make: Metba Model: MB-1 Features a 3-axis dimension display. Table: 600x210mm Travel: Kdsdpjz Dtw Sefx Ah Eot - Longitudinal with motor / Manual table: 290mm / 300mm - Vertical manual with bellows / without bellows: 270mm / 320mm - Vertical motorized with bellows / without bellows: 260mm / 310mm - Cross travel of the headstock, manual: 180+120mm Automatic feeds: - Vertical and longitudinal: 15 to 500 mm/min. - Slow feed: 7 mm/min. - Rapid traverse: 1200 mm/min. Speeds: 12 (From 45 to 2,050 rpm) Motor power: 5Hp (Three-phase 380V) Headstock type: Swivel / Universal (accepts arbor or vertical headstock). Common uses: Machining of small/medium-sized parts, prototyping, and maintenance or restoration work. Includes: - Vise with swivel - Collet chuck with various sets of collets - Various milling tools (See photographs of the material on the floor)

Condition: used, Second-hand Weinig UC-Matic window production line Kodpfx Aoz Dtwxsh Esdt Technical data: - TBA

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch Kdsdpsz Dtwrjfx Ah Eot -TIG hose package: gas-cooled -Length: 4 m -Connector: 4-pin -Dimensions: 300/300/H70 mm -Weight: 1.7 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 683 h, lifting height: 1,700 mm, free lift: 1,700 mm, fuel type: electric, fork length: 1,150 mm, total height: 2,100 mm, color: other, GVW: 683 kg Lifting capacity: 1.200 kg Kedpfxjz Dtwfe Ah Esdt LOW HOURS! FUNCTIONS LIKE NEW! Battery 24V 3PzB 225Ah 2025 with water filling system, 220V high-frequency charger, Freelift, Fork width 1150 x 570 mm, Single fork rollers, Foldable platform,

Condition: excellent (used), Year of construction: 2016, operating hours: 54,737 h, functionality: fully functional, power: 250 kW (339.91 HP), volume flow: 2,502 m³/h, pressure (max.): 8.5 bar, Screw compressor GA250 250 kW 8.5 bar 41.70 m3/min Kdsdpez Dtvnefx Ah Est Year of manufacture: 2016 Operating hours: 54,737 h

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8 m -Connector: 4-pin Kodez Dtvbspfx Ah Eedt -Transport dimensions: 400/400/H90 mm -Weight: 3.1 kg

Year of construction: 2011, condition: good (used), Storemaster Regal, Master Tower SL 19, with double-sided pull-out and 6m crane – used: Price at location: €22,500 (net), disassembled and loaded Manufacturer: Storemaster Type: Master Tower SL 19 Year of manufacture: 2011 Max. possible load per drawer with uniform distribution: 1,200 daN Max. possible load per shelf block with uniform distribution: 60,000 daN Max. possible payload under the vacuum device attached to the 6m crane jib: 400 daN PROJECT NO.: 1101 AS 11459 TwenTower SL with 19 large-format drawers, each with a load capacity of 1.2 tons, filling height: 50 mm, Double-sided pull-out – continuous locking not possible, Pull-out roller guides in MasterTower® SL – - Standard design with pivoting function OverheadTop with 5 large-format stacking bays, each with a capacity of 3 tons, Overall height: 4,135 mm (bridge crane height 3,500 mm!!!) Tower crane system-integrated for max. 400 kg sheet weight with a 6 m operating radius (from 350 kg sheet weight and fully electrified for safety reasons) ... manual version Kodpfx Asz Dtu Rsh Ejdt Additional cost for electric trolley for sheet weights ≥ 350 kg (large format 10 mm) Additional cost for electric crane arm swivel for sheet weights ≥ 350 kg (large format 10 mm) VacuMaster special for use with storemaster® drawer systems with a max. of 750 kg storemaster heavy-duty drawer rack system: MasterTower SL 19 (TwenTower base) Surface: Frame zinc-plated and drawers painted according to NCS-S6500-N (dark gray) Item in stock Drawing No.: 1 shelf block for large-format sheet packs, consisting of: 2 side walls 2,200 x 1,785 x 1,000 + welded top plate 220/100/10 19 welded rails in a 100 mm grid 4 side doors made of HEB100x2 200x1,535x650 with hinges 1 top beam pair: front 1x HEB 180 x 3,730 mm rear 1 x IPE 180 x 3,810 mm each with 4 supporting deep-web girders IPE 80 x 1,500 mm 1 frame extensions: 1,500x1,785x3,810 front 2 x HEB 140 x 1,500 (with 1,500 -C85SL length) rear 2 x IPE 180 x 1,500 (with 1,500 -C85SL length) each with 4 supporting deep-web girders IPE 80 x 1,500 mm 3 bracket beam levels IPE 120 x 1,100 with flange plate incl. end face each with 4 connecting bolts (1 piece per bracket arm shoe) each with 2 attached head-deep girders UNP 120 x 1,714 mm each with 2 insert deep girders IPE 80x 1,572 mm 1 top beam pair front 1x HEB 100 x 3,730 mm rear 1 x HEB 100 x 3,810 mm each with 4 supporting deep-web girders IPE 80 x 1,500 mm 19 drawers St-rollers UNP 80 x 3,300 x 1,750 (H*W*D) with ryt gf tiv 080 43 6 recessed deep-web girders QR 40/4, 3 mm from UK 1 tower crane, with electric rotation, electric travel and electric lifting, consisting of: a crane column QR 140/14 x 3,740 mm long (mounted on the right side), a pivoting crane 6,000 mm nominal length x 225° x 500 kg 1 VacuSheet - vacuum lifting device x 750 kg 1 machine nameplate 1 operating manual VacuMaster Basic and VacuMaster Comfort Technical data Due to its modular design, the VacuMaster Basic and VacuMaster Comfort can be individually configured for any application. The technical data of the device depend on the chosen configuration. Below, you can determine initial technical parameters for your VacuMaster based on preconfigured lifting devices for standard workpiece formats. Here's how to proceed: 1. Select the type of handling: e.g. Horizontal handling 2. Select the maximum load capacity: e.g. 250 kg 3. Select the workpiece format: e.g. 2,000 x 1,000 mm Condition: good Available: immediately Location: 87719 Mindelheim

Condition: good (used), TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled Kdedpoz Dtuwsfx Ah Eot -Length: 8 m -Connector: 4-pin -Transport dimensions: 400/400/H90 mm -Weight: 3.2 kg

Condition: used, Year of construction: 2018, machine/vehicle number: 505, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 11,700 mm, inner dimension width: 1,300 mm, inner dimension height: 2,350 mm, total length: 13,130 mm, total width: 2,840 mm, total height: 2,900 mm, overall weight: 6,600 kg, fuel type: electric, Equipment: CE marking, documentation/manual, We are selling our drying container, manufactured by Eberl Drying Systems. The system features an infeed device with radio remote control. The stacking dimensions are: height 2200 mm, width 1250 mm, length 11600 mm. The system has radio-controlled measuring points and is controlled via the Eberl drying program. Kodpfez Dtukex Ah Eedt

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (software IMAWOP) Max useful working area (without edge banding process) mm 6100 x 2000 x 125 Max useful working area (edge banding process) mm 3100 x 1925 x 100 (panel thickness) No. 10 movable rails (supports) 6 x length mm 1400, + 4 x length mm 1450 LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pump, capacity 140 m3/h) Clamps for workpieces fixing Safety side metal grids and front emergency carpets Motorized carpet to evacuate chips and wastes Separate electric and command cabinet No. 1 Vertical Electro-spindle HSK F63 ( Kw 18) Automatic Tools Changing System, with 18 folds (places) Kdodpfx Aoz Dtudoh Eet Banding group on board - (Y AXIS) Glueing Unit (P.U.R. Glue + Quick Melt unit) VT 100/100 with NORDSON premelter Edge coils supporting unit (No. 2 reels) OPTIONALS: N° 1 Aggregate Boring Unit, "cross" shape, with 4 horizontal spindles N° 1 Circular saw (diam. mm 200) N° 1 Combined unit: Corner rounding / Edge scraping (with glue scraping extension)

Condition: new, functionality: fully functional, mileage: 1 km, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,450 mm, fuel: diesel, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2026, Equipment: ABS, Android Auto, Apple CarPlay, EBS, air conditioning, airbag, blind spot assist, cruise control, electronic stability program (ESP), full service history, lane keeping assist, navigation system, power assisted steering, traction control, IVECO Daily 35-160, BRAND NEW, NOT YET REGISTERED. 3.0cc engine, 3,450 mm wheelbase, 6-speed manual transmission, business pack including air conditioning, driver’s suspension seat, touchscreen infotainment system with Apple CarPlay/Android Auto, and virtual cockpit. Option for customization. Kdodjz Dtt Tjpfx Ah Ejt 24 MONTHS OFFICIAL IVECO WARRANTY.