HBSGmbH

Condition: good (used), Good condition. 3 t/h. 200 kW engine. Bdsdpfexzi Ansx Ab Tjk

Condition: like new (used), functionality: fully functional, power: 110 kW (149.56 HP), Complete Refurbished Amandus Kahl C35-780 Pellet Press. The C35-780 pellet press itself has been recently refurbished with a full documentation of the all the new parts available, with one of them included in the pictures. The pellet press has been refurbished in 2024. The production line includes: - Amandus Kahl C35-780 Pellet Press with hydraulic nut - The Pellet Press has a new 110 KW engine - Electrical cabinet with emergency stop including complete electrical documentation - 4 additional die's of 6 mm - 60 liters of extra synthetic oil List of refurbished parts: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oilfilter - 1 new oil pump - 20 liters of 800/460 Syntethic Oil Bjdpfx Asxykzpjb Tedk - 1 New Pressure Piece Main Shaft

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2101177, height adjustment type: electric, type of input current: three-phase, Pelletizing plant for wood / straw / hay / sheep’s wool / feed – currently still in operation – inspection possible Bdsdpfx Abjxwzkio Tek - Raw material bunker with discharge to cutting mill, suitable for wood chips up to and including G30 size + conveyor belt - Cutting mill 22.5 kW with spare blades - Material bunker 4 m³ with discharge conveyor belt, LP series - Pellet mill LP22 (integrated central lubrication, water pump, and temperature monitoring ensure maximum user-friendliness) - Screening unit with conveyor belt for LP22 (incl. level sensor for BigBag and sensor cable for connection to pellet mill LP22) - 6x Vario BigBag rack, 1.5 m³ each - 20x production BigBags for pellets - Dies for wood pellets available in sizes 6x19mm to 6x24mm - Dies for straw and hay pellets: 8x25mm For further information, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2023, operating hours: 990 h, functionality: fully functional, type of input current: three-phase, total height: 3,900 mm, input current: 63 A, total length: 9,500 mm, total width: 4,500 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), as well as feedstuffs. This is a complete plant built on a base frame, consisting of the following components: - Raw material hopper 4 m³ incl. agitator. This was extended by approx. 3–4 m³ with wooden panels. - Intermediate screw conveyor to hammer mill - Hammer mill 11 kW for size reduction of wood chips or other materials Bdsdpfx Absxv Dkce Tok - Inclined mixer for material homogenization, incl. moisture measurement, dosing, and level measurement - Dosing hopper for pressing aids feeds into the inclined mixer - Dosing screw conveyor for optimal material feed into the press (speed-controlled) - Press 15 kW including full indicator, temperature monitoring and discharge chute - Conveyor belt to dedusting screen - Dedusting screen with material discharge at 3 m height The plant is designed so it can be easily expanded with a second 15 kW press. The entire system is centrally operated via Siemens PLC with touch display. All parameters are monitored so that the press will be shut down automatically in the event of a fault. The press can also be operated and monitored remotely from any PC. The chip dryer shown in photo 2 on the wall, including discharge and control system, is also available for purchase. For details, please contact us.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, power: 110 kW (149.56 HP), Complete Refurbished Amandus Kahl C35-780 Pellet Press Production Line. The C35-780 pellet press itself has been recently refurbished with a full documentation of the all the new parts available, with one of them included in the pictures. The production line includes: - Amandus Kahl C35-780 Pellet Press - The Pellet Press has a new 110 KW engine - Electrical cabinet with emergency stop including complete electrical documentation - Conveyor belt - A sieve system that sieves the pellets and automatically cools them - Hydraulic nut - A roller head in perfect condition, - Electrical wiring included. Bdjdpfxoxvp Rho Ab Tsk - A feeding screw that brings the product to the Pellet Press - Dispenser system that automatically measures the number of pellets to release for e.g. a big bag. - 4 additional die's of 6 mm - 60 liters of extra synthetic oil List of refurbished parts: - 7 new bearings - 2 new wear rings Dwjbngmhexd U Izsd Eed - 1 new air filter - 2 new oil seals - 1 new oilfilter - 1 new oil pump - 20 liters of 800/460 Syntethic Oil - 1 New Pressure Piece Main Shaft

Condition: used, functionality: fully functional, For sale: used Amandus Kahl 45-1250 250KW granulator, Bedpfx Asxq Tm Aeb Todk

Condition: repair required (used), Two Kahl 1000 pellet mills, 185kW and 200kW. In need of overhaul. Bsdpfx Aboxmvdvj Tjdk

Condition: excellent (used), Vomm 90kW granulator in very good condition Bdsdpfx Abjxmu E Eo Tok

Condition: excellent (used), Granulator PD 1 with 22 kW power, intended for processing sawdust into wood pellets. Used equipment. Capacity: 300–350 kg/h. The granulator is in very good condition. Bdedpfx Aexmu Efjb Tsk

Condition: used, CPM 7930 granulator with 762mm die for sawdust. Motor 200 or 250kW, 132kW also possible. Capacity 2-3 t/h. Bedsxmu Dnspfx Ab Tedk

Condition: good (used), 3 tonnes per hour. Factory stopped production in 2013. Kahl pelletizer was renovated in Germany. Price does not include dismantling. Bdedpjxlgddofx Ab Tok

Condition: new, functionality: fully functional, We offer a high-quality low-speed pellet granulator. The pellet mill is 100% manufactured at our ECOMAS Polska Czernikowo facility. We guarantee equipment engineered for continuous 24/7 operation. Our machines produce pellets that comply with EU standards—properly compacted, free from harmful additives, and with a calorific value of at least 4.6 kWh/kg. The main advantage is the use of modern, hardened dies and rollers (60HRC+), manufactured using CNC technology. Our dies ensure high output, low energy consumption, and long service life for both dies and rollers. Another benefit is the main shaft lubrication system featuring oil and oversized bearings, which significantly reduces wear! Are you struggling with your current granulator—frequent bearing failures, low efficiency, die blockages, high energy consumption, fast wear of parts, etc.? With our machines, these problems are eliminated. We provide a tailored approach to every customer! See our machines in action by searching YouTube for: ecomas_polskie_peleciarki Available power options: 7.5kW, 11kW, 15kW, 18.5kW, 22kW, 30kW, 37kW, 45kW, up to 55kW. Bjdsxk Ta Nopfx Ab Todk Configuration: - Complete head with 2/3/4/5 rollers on cylindrical bearings - Welded body—completely filled with Orlen Oil Transol VG 320 - Cylindrical-bevel gearbox (98% efficiency) - Base frame - Bolted dies: Ø230, Ø260, Ø285, Ø310, Ø400, Ø520; hole diameters: 3, 4, 5, 6, 8, 10mm (100% stability, easy disassembly, and temperature control) - Standard oil tank or optional tank with pump and oil system (oil lubrication, easy oil change) - User manual - 12-month warranty The buyer receives a comprehensive operating manual and a one-year warranty. We offer full warranty and post-warranty support. Prices listed below in the attached PDF file. *Product and technical solutions are protected.

Condition: used, machine/vehicle number: No. 0028/90, Pellet press, Granulator Buhler DPAB 660/138 660 790 196 138 Bodpfx Asxg Hmueb Tjdk No. 89308 DPAA No. 0028/90 Granulator 'Buhler' 2.5 t/h, 250 kW €44,500 Trakai district For sale: granulator 'Buhler' Capacity: 3 t/h Motor: 250 kW Location: Trakai district Price: €44,000 German manufacturer. Equipment is in very good condition, lightly used. We can also offer other professional pellet production equipment.

Condition: used, Granulation and packaging line. Model: HM700E PRO 11KW Year of manufacture: 2022 Bdodpfx Ajxcy D Esb Tjk It includes: Hammer mill - shredder Chip mixer Chip feeder Granulator Vibrating table Product feed belt (conveyor belt) Pellet hopper with packaging equipment Bag sealer and chip moisture meter Hammer mill with cyclone Motor: 11 kW / 400 V Productivity: 300 - 700 kg / h Weight: 360 kg Soft start installed Cutting system 16 hammers Chip mixer: Volume: 1.0 m³ Chip feeder: Motor: 3.3 kW / 380V Feeds up to 800kg / h Granulator: Motor: 22 kW / 380V/50hz; Productivity: 300 - 700 kg/h Weight: 590kg Soft start installed Vibrating table: Weight 90kg Product feed belt (conveyor belt): Dimensions: 5m × 0.4m. Automated packaging equipment: Dimensions: 1, 90x2, 50x2, 30 Volume: 1.5m³ Packing in bags: 1 - 50kg Equipped with two types of scales Bag sealer 220V Moisture meter

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 765, height adjustment type: hydraulic, type of input current: three-phase, ambient temperature (min.): 12 °C, ambient temperature (max.): 40 °C, total height: 1,635 mm, overall weight: 3,900 kg, power: 110 kW (149.56 HP), input voltage: 400 V, Equipment: documentation/manual, The Amandus Kahl 38-780 pellet press was manufactured and purchased from the manufacturer in 2016 and is designed to produce 6mm diameter pellets from wood waste and other plant waste. Installed in a line for demonstration production of wood pellets. The granulator is supplied as a set of: 1. Amandus Kahl 38-780 pellet press with automatic granule density adjustment system Use conditions: ambient temperature Press: 0 to + 40 °C Includes: - Dismountable cast housing, equipped with cooling ribs in the gearbox area - Dust cap and inlet cap with product distributor - Main shaft with axial and radial bearing support - Runner head with roller runners made of flame-hardened steel - Spacer rings - Unloading device - Auger transmission operating in an oil bath, auger wheel made of special bronze, hardened auger shaft - V-belt fan pulley - Oil pump for lubricating main bearings, with oil filter, pressure switch and thermometer - Tool box with special tools Press drive - granulator consisting of: - Three-phase motor on legs, (IE 2) power: 110 kW - Tension tires - V-belt pulley - V-belt - V-belt protection - execution in the form of a steel structure, side walls with grates and special deflectors, required for cooling the press Central lubrication of runners for lubrication of runner bearings during press operation consisting of: - Lubricant distributor, with a system of pipelines and couplings - Hose with a central lubrication nipple - Unit of grease lubrication pumps with a tank, motor pump, safety valves - Control device and control unit Hydraulic system of the granulator press for stepless change of the gap between the roller runners and the matrix, as well as for quick and easy release of the runner head Bjdpfoxcv Dzsx Ab Tjdk Using conditions: ambient temperature 12 to + 40 °С - Hydraulic unit consisting of: - Hydraulic nut with corrosion-protected sealing surfaces, with sealing rings laid in grooves, flat hinge and spacer rings - Hydraulic motor pump with electric control box for adjusting the hydraulic pump and hydraulic valves with an on-off button, control voltage of the high-pressure hose, couplings and pressure limiting valves 2. Mixing auger M 315 For mixing and preparing raw materials consisting of: - Pipe body with a service cover, including inlet and outlet openings - Auger shaft with progressive suction and mixing blades - End shields with rolling bearings and seals - Device for spraying liquids using a double-sided nozzle - Hinged joint for turning the auger from the press - Overhead gearbox, power: 5.5 kW 3. Water dosing system in composition: Water dosing system, type WD GLI 15 - capacity: 10-100 l/h at a back pressure of 36 bar Consisting of: - Dirt trap - Magnetic shut-off valve - Reducer made of cast tin-zinc bronze with a pressure gauge - Flexible metal hose - Inductive flow meter 4. Flat matrix Material: AKN 13 Perforation: 6 mm 5. Flat matrix for soft wood Material: AKN 13 Perforation: 6 mm 6. User manual, other documentation ALSO FOR SALE: COMPLETE PELLET PRODUCTION LINE A fully operational pellet production line is for sale. This is a turnkey solution ready to start production immediately. Key Specifications: Productivity: 160 tons/month Pellet Density: 1.24 kg/dm³ Installed Power: 352 kW Heat Generator: 1 MW (thermal energy) Final Product: High-quality 6 mm fuel pellets

Condition: new, Year of construction: 2024, functionality: fully functional, power: 132 kW (179.47 HP), input frequency: 50 Hz, Equipment: CE marking, air conditioning, Brand new, unused pellet press, year of manufacture 2024!\n\nTECHNICAL DETAILS\n\nRaw material processing: grass, rice husks, wood sawdust, biomass, straw, cotton stalks\nOutput: 1,500 – 2,000 kg/h\nPellet diameter: 6 – 12 mm\n\nMACHINE DETAILS\n\nMain motor power: 132 kW\nVoltage: 3 phase, 380 V, 50 Hz\n\nDimensions & Weight\nDimensions (L x W x H): 2,600 x 1,300 x 2,300 mm\nWeight: 4,500 kg\n\nEQUIPMENT\nFully automatic control cabinet\nAir conditioning\nAutomatic bearing lubrication system\nRoller and new ring die (6 mm) for sawdust\nCE & ISO certification Bsdpfx Ajxclitob Tedk

Condition: used, Year of construction: 2007, functionality: unexamined, machine/vehicle number: 439944, power: 335 kW (455.47 HP), Hammermill 1500RPM 335 kW and air separator for sale. Bdjdpjxby Tkjfx Ab Tek

Condition: new, Year of construction: 2024, operating hours: 12 h, functionality: fully functional, input voltage: 380 V, 1. Material feeding table with moving chain mechanism. Height adjustable: min 0.8m, max 1.4m, equipped with electric drive. 3kW, length 4m. 2. Large roller shredder with double blades, blade diameter 1.8m, depth 1.9m. 380V, 30kW. 3. Connection point with locking mechanism for bulk material feeding to the crushing mill. 4. Hammer mill turbine, 380V, 35kW. 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume: 4.8m³, 380V, 2.2kW. 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Includes additional cooling for granulator rings and fine dust extraction. Maximum capacity 3T/h, 380V, 90kW. Bdodpfsw U Ugmox Ab Tek 7. Small mobile conveyor belt. Width 38cm, length 2m, 380V, 0.5kW. 8. Large transport conveyor with head valve. Width 38cm, length 6m, 380V, 1.5kW. 9. Pellet cooler with cyclone for fine dust collection and head valve. Maximum capacity 3.5T/h, 380V, 3kW. 10. Screener/vibrating table with screenings collector and screw feeder. 380V, 1.5kW. 11. Long rotary drum screener with screening mesh. Length 3m, 380V, 1.5kW. 12. Conveyor belt for feeding to packaging. Length 4.2m, 380V, 0.75kW. 13. BIG BAG packaging unit with calibrated scales (accuracy +/- 5g per 1T). 14. Screw conveyor for feeding material to the automatic bag packing machine. Length 5m, diameter 27.5cm, 380V, 3kW. 15. Automatic packaging machine with bag sewing and PVC bag sealing functions. Includes automatic labeling conveyor. Maximum capacity 4.2T/h, with air compressor. 16. New electric forklift, 2.5T, triple mast, low lift, with enclosed cabin.

Condition: excellent (used), functionality: fully functional, height adjustment type: electric, power: 90 kW (122.37 HP), input voltage: 380 V, Ready for work. Maximum capacity from the manufacturer 1.5T/H Bedpfjw Ulq Ajx Ab Tjdk

Condition: used, Year of construction: 1985, functionality: fully functional, For sale: granulator from the renowned manufacturer Buhler. Granulator model: DPAA-660 Motor power: 160 kW – option to install a more powerful motor – 200 kW. Die diameter: 660 mm, Die working width: 160 mm, Granulator output on straw / sawdust: 2 – 2.5 t/h The granulator is currently dismantled. For a committed buyer, we will assemble it using new wear parts. Bedpfx Aow Uh Nzsb Tsdk Contact for more photos and details. Machine available for inspection in Sępólnie Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: used, Year of construction: 2009, operating hours: 1 h, machine/vehicle number: -----, Business Relocation – High-Quality Pellet Production Plants for Sale! For years, we have been recognized as one of the leading manufacturers of premium pellets. Due to the relocation of our production site to our main plant premises, attractive opportunities now arise for companies in the wood and pellet industry: We are offering you the chance to acquire our currently operational production plants for manufacturing A1plus grade pellets. Your Benefits • High-quality machines and equipment currently in operation • Ideal for producing premium-grade A1plus pellets • Facility visits possible during ongoing production until mid-October 2025 • Attractive conditions for prompt purchase • On-site inspection & consultation Interested parties have the opportunity to see the equipment in operation on site and gain a comprehensive impression of the condition and performance of the machinery. For initial orientation, we provide you with informative photos of the machines. Upon request, we are happy to send you detailed technical specifications and provide individual consultation. Bdedpfxow Tdk Ss Ab Tek For further information or to arrange a viewing appointment, please do not hesitate to contact us:

Condition: used, CPM 9042-12 granulator with many spare parts Bodsw Saayspfx Ab Tsdk

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 75 kW (101.97 HP), For sale: fully operational pellet production line. Bjdew Ry U Iepfx Ab Todk

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, power: 75 kW (101.97 HP), Complete pelletizing line consisting of: - Pellet press OGM 1.5 - Hammer mill - Cyclone - Cyclone with fan - Screw conveyor - Material silo - Material mixer for pellet plant - Elevator - Pellet collector Bdsdpfjw Rmpfex Ab Tjk - Control cabinet - Pellet cooler TECHNICAL DETAILS Capacity for wood: 1 tonne/hour Capacity for straw: 1.5 tonnes/hour Die for sawdust: 8 mm Elevator height: 6 m MACHINE DETAILS Pellet press OGM 1.5 rated power: 75 kW Hammer mill rated power: 55 kW Cyclone with fan rated power: 11 kW

Condition: used, Pellet presses Bodpfxsw Iy T Ss Ab Tjdk Manufacturer: Bühler Model: RPWPR 900.138 EX 4 presses - Bühler 3-4 tons per hour 4 mixers 4 feed screw conveyors 20 m long stainless steel chain conveyor 16 m long output conveyor Soft starters