Gattringer

Condition: used, Year of construction: 2021, YEAR OF MANUFACTURE 2021 MAIN ENGINE 60 HP (45 kW) CUTTING HEIGHT 120 mm CUTTING WIDTH 400 mm Ksdpfjyaplbox Ah Njll

Condition: used, machine/vehicle number: 008384, Max. panel width: 4300 mm Klsdpfx Ahjx Swcmo Njl Max. panel length: 4300 mm Main saw blade projection: 95 mm No of Grippers: 9

Condition: used, machine/vehicle number: 008392, Max. panel width: 4500 mm Max. panel length: 2200 mm Kledpfx Aex Swb Noh Nel Main saw blade projection: 127 mm No of Grippers: 7 Panel Rotation Station: yes Thin sheet loading: yes

Condition: used, Parts cutter - for doors Klsdpfx Asx N T Nwsh Nol

Condition: used, machine/vehicle number: 008339, Max. panel width: 3800 mm Max. panel length: 1600 mm Main saw blade projection: 95 mm Kledpfx Ajx Nm S Seh Nol No of Grippers: 6

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Homag SAWTEQ B-130 Optimat / HPP130/38/38 Optimat Cutting length: 3800 mm Klsdpfx Ahex Na Awj Nel Pusher depth: 3800 mm Blade projection: 65 mm, saw carriage speed up to 60 m/min Pusher speed: up to 25 m/min Main saw motor: 5.5 kW Main saw blade diameter: 300 mm Control: CADMATIC 5.0 software

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, saw blade diameter: 600 mm, STROMAB TR600 Crosscut Saw Specification: • Condition – used, after inspection Klsdpfx Ajx Ezmcsh Nol • Manufacturer – STROMAB • Model – TR600 • Total power – 9.2 kW • Blade diameter – 600 mm • Motor spindle diameter – 30 mm • Motor speed – 3,000 rpm • Hydraulic clamping and blade movement • Adjustable cutting speed • Max. cutting width – 610 mm (at 30 mm height) • Max. cutting height – 160 mm (up to 380 mm width) • Additional table – 1 x 2.0 m • Base weight 570 kg • Year of manufacture: 2001 • Extraction port – 3 x 100 mm • Machine complies with CE standards, equipped with guards, E-stop buttons, and Italian documentation • Overall dimensions (base) – 130 x 145 x 135 cm (L x W x H) Additional information: • Very good original technical and visual condition • The photos shown reflect the actual condition of the item for sale • Possibility to run and test the machine on site

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 32664, collet bore: 40 mm, saw blade diameter: 220 mm, main saw diameter: 220 mm, overall weight: 1,200 kg, table length: 5,000 mm, positioning accuracy: 0.1 mm, table width: 250 mm, working range: 250 mm, pressure: 6 bar, type of input current: three-phase, total width: 250 mm, cutting width (max.): 250 mm, compressed air connection: 6 bar, cutting diameter: 220 mm, extraction nozzle diameter: 120 mm, working height: 30 mm, Friulmac Randomat E 001 Serial No: 32644 Year 2001 in excellent condition specially made for End Matching all types of wood flooring. Ksdjx Ec Hnjpfx Ah Nell Fitted with a Sound & Safety Enclosure with front sliding doors and an entrance door at each end. 2 x 4kw motors do the cutting of the tongue & groove. Will machine random or fixed lengths from 250m/m up to 6m. long. 6m. Long Infeed Belt Conveyor, and a 6m. Long Outfeed Belt Conveyor. Siemens Simatic OP7 Control System. Complete with documentation for Operating and Programming.

Condition: used, machine/vehicle number: 008357, Max. panel width: 4400 mm Max. panel length: 4300 mm Kedjx A Tk Ejpfx Ah Njll Main saw blade projection: 75 mm No of Grippers: 9

Condition: used, machine/vehicle number: 008206, Max. panel width: 4300 mm Klodpjx A Tizsfx Ah Nel Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 9

Condition: used, machine/vehicle number: 008177, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 7 Klodpfjx A Tamsx Ah Nel

Condition: used, machine/vehicle number: 008236, Max. panel width: 3200 mm Max. panel length: 3200 mm Main saw blade projection: 65 mm Kljdpex A Hc Ujfx Ah Nel No of Grippers: 7

Condition: excellent (used), Year of construction: 2022, operating hours: 150 h, functionality: fully functional, Machine overhauled in July 2022, date of purchase by our Company. The asset was purchased directly from the manufacturer with overhauls and warranties. The die-cutting machine is suitable for a wide range of applications and in our organization was used to shape fiberglass panels, including multilayer ones, due to the power of the die-cutting table. Line features: Kledpsxz Emiefx Ah Nsl - Width = 2400 cm - Depth = 1500 cm - Opening clearance = 250 mm with plates open - Pressing force = up to 80 Tons The machine is equipped with all the safety systems required to be considered safe for all operations pertaining to the equipment. The system is supplied complete with a set of dies generally used for our needs.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ZH-3316, overall weight: 3,000 kg, table length: 2,680 mm, table width: 1,450 mm, Purchased new in 2021. Very good overall condition. Ideal for cutting veneer, cardboard, paper, etc., and suitable for high production volumes. All essential settings for cut quality and precision are conveniently located on the front of the machine. Highly precise motorized rear stops, controlled via the digital display on the control console. Cutting parameters are adjusted on the console and can be fine-tuned using a handwheel, allowing for quick and accurate setup. Photoelectric safety: safety sensor protects the operator during blade operation. Emergency stop with access at the front of the machine. Cutting line illumination. Stroke counter. Technical specifications: Ksdjxzrfxepfx Ah Nsll • Maximum cutting length (mm): 2680 • Maximum cutting width (mm): 1450 • Maximum cutting thickness for wet veneer (mm): 60 • Maximum cutting thickness for dry veneer (mm): 30 • Blade size (mm): 2680*140*12.7 • Motor power (kW): 4.37 • Machine dimensions (mm/inch): 4200*2300*1700 • Weight (kg): 25 • 380V 3PHASE 50HZ Extras: Sold with new spare blade and a new Teflon plate.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Edging saw Producer Strojírna Loučná Year of manufacturing 1999 Kljdpoxzntxsfx Ah Nsl Main drive 11kW Saw diameter 200mm Cutting widht 200 mm Cutting high up to 30 mm

Condition: used, Year of construction: 2001, functionality: fully functional, Two pneumatically lowered heads with 330 mm diameter saws. Left head – stationary, right – movable. Cutting heads of P models are tilted with the help of pneumatic cylinders. Has a “two-hand” control mode and an instant saw stop device. General characteristics 1 Motors 2 pcs. x 1.1 kW, 380 V 2 Number of revolutions 3765 rpm 3 Saw diameter 330 x 30 mm 4 Saw head tilt 90º- 45º 5 Rotation -45º- 90º- 45º 6 Max. cutting length 3335 mm, 7 Min. cutting length (all models) when heads are turned inward 45º 420 mm 8 Min. cutting length when heads cut at an angle of 90º 365 mm 9 Max. dimensions of cut workpieces when cutting 45º (HxW) 90 x 100 mm Kedexytnlepfx Ah Nell 10 Max. dimensions of cut workpieces when cutting 90º (HxW) 90 x 145 mm

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, workpiece length (max.): 2,600 mm, workpiece height (max.): 45 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. machining length: 2,600 mm Max. machining height: 45 mm Kledpoxxapgsfx Ah Nol MACHINE DETAILS Installed total power: 6.5 kW

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Kedpfxexvc Rzs Ah Nell Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels Ksdpfx Ahexvc N Ds Njll With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 160 / 2018, overall weight: 4,600 kg, positioning accuracy: 0.01 mm, table width: 500 mm, air demand: 1 m³/h, compressed air connection: 6 bar, warranty duration: 12 months, working height: 150 mm, saw band length: 6,170 mm, saw band width: 90 mm, wheel diameter: 1,000 mm, wheel width: 80 mm, Generallly refurbished from 330 mm version to 500 mm in 2025: - complete new conveyor system with chromatic table - complete new driven infeed top pressure system - new electrical cables on the machine, new pneumatic and oil lines. - new crowning on main wheels Kjdpsxtmqmsfx Ah Noll - new main shafts & bearings - all linear guides are new Heavy-duty horizontal Thin Cutting Band Saw for all your re-sawing applications, including flooring, windows, doors, furniture and musical instruments. Put these advantages to work in your operation: - Steel Table at the cutting spot for the highest precision - High precision lamellas with gluable surface in tolerance ± 0.15 mm, depending on lamellas width - Divided Feed Conveyor with Top Driven Infeed Pressure Unit - Bearings on both sides of the Main Wheel Shafts for maximum cutting stability - Saw Monitoring during machine operation - Heavy-duty, cast-iron construction-built for longevity and superior tolerances - CNC touch-screen control panel for easy height adjustment - Thin-kerf, high-tension blades to minimize your waste - Handles material up to 500 mm wide, 150 mm thick - Adjustable cutting speed and feed speed as well - Produces smooth, gluable surface - Variable feed up to 16 m/min. - Cutting speed up to 50 m/s

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Consists of: Kjdpjxraucjfx Ah Njll Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Positioning speed 60 m/min SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values 2 software versions with different optimization levels available optionally. ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Locking cable for customer’s own crosscut saw

Condition: like new (used), Motor power 5.5 kW Cutting length 3000 mm Maximum height 60 mm Ksdpfx Aexnzuveh Nell Hydraulic knife movement Hydraulic clamping Photocell protection

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Automated saw for quality sorting of boards – Edger-Crosscut Saw-Conveying Unit for Sawmill Timber Grading JRIMAC Twin-Cut This installation is designed for sawing and optimal sorting to separate grades. Edger (complies with current safety standards): Cutting length 6.0 m – Cutting height 120 mm – Maximum cutting width against stop 380 mm – Retractable saw blade cuts in both directions (forward and reverse) – Pressure bar with safety device – Positioning lasers – Adjustable cutting speed. Crosscut Saw: Cutting unit at both ends – Unit 1 is fixed – Unit 2 can be positioned at 4,000 mm, 5,000 mm, and up to 6,000 mm. Conveying Unit – The board is fed from the right to the edger by toothed wheels – The operator rips the boards longitudinally and marks the quality (X, O, //, etc.) – Offcuts are automatically discharged at the rear into a trolley – The edged timber is conveyed and crosscut automatically to the desired length – End trimmings are ejected into containers or bags – The timber continues on roller tracks to be picked up and stacked by a third party according to its grade. Scissor Lift Table (not included in the machine price): Upstream, the timber is placed on a scissor lift table and brought to the height of the edger/operator. 400 Volts – 63A – 22 kW – 550 mm blade diameter – Control panel with programmable touch screen Ksdexm R U Aopfx Ah Nsll Machine dimensions: Length 8.80 m x Width 4.40 m x Total height 3.50 m – Length of conveying unit to stacking area: 15.0 m – Full footprint fits within a rectangle of 8.80 x 19.5 m – 3,200 kg Existing customer base: There is currently a steady clientele in French-speaking Switzerland for timber selected based on quality criteria – This external market is also available for sale. The machine is in good technical and visual condition – Available mid-December 2025 (Y07-pa300k-ppoc100k/pv30k)

Condition: like new (used), Year of construction: 2020, Total Cutting Performance: 24,000 linear meters Cutting length: 4400 mm Air-cushioned machine table, version with stop ruler on the left Width stop / Cutting width: 3100 mm, with SL 4400 welded steel construction – absolutely stable and torsion-free, running on linear guides Angle air-cushion table and stop ruler: 1800 mm 2 air-cushion support tables: 1800 mm Additional air-cushion support table: 1800 mm (total of 4 tables) 4 feed rollers on the front side (1 per table), Part No. 5030631 Electrical system: Standard 400 V, 50/60 Hz Saw carriage: Cast version for SL 4400 Main saw motor: 7.5 kW, 400 V, 50/60 Hz Scoring unit motor: 2.2 kW with electric adjustment Automatic cutting length detection Motor-driven groove height adjustment Automatic / manual infinitely variable cutting height adjustment Klsdoxlthpepfx Ah Njl Quick-change clamping system: Pro-Lock Side alignment Single Press SL 4400, pneumatically and program-controlled Max. number of workpiece clamps: 9 workpiece clamps (6+3) for cutting length 4400 mm Operator console: CUTCONTROL 2 multitouch control system, 21.5" Full-HD screen, 16:9 format Manually operated device incl. stand Label printer and software Uninterruptible power supply (UPS) EASY-PLAN – Dongle version OPTI-CUT – Machine software Opti Pro – Office optimization software

Condition: excellent (used), Year of construction: 2018, Complete Posch line Klsdpfexgg Nvex Ah Nol