MHS-Werkzeugmaschinen

Condition: ready for operation (used), Year of construction: 2021, Make: POS Type of machine: POSmill H 800 U Year of manufacture: 2021 Control system: Heidenhain TNC 640 Machine's weight: 20 t Tool holder: HSK 63 A Dkjdpfxe Ahyd Ns Aiiow x-travel: 670 mm y-travel: 820 mm z-travel: 600 mm Speed range: 18.000 U/min max. Table load: 1.200 kg Operating time: 20.954 h Spindle operating time: 11.514 h Table dimensions: 800 mm Number of tools in the magazine: 96 Internal coolant supply: 40 bar

Condition: excellent (used), Year of construction: 2017, operating hours: 32,000 h, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 12,000 h, spindle nose: SK 40, number of slots in tool magazine: 60, Equipment: chip conveyor, Universal Machining Center Manufacturer: DMG MORI Model: DMU 50 3rd with Lang RoboTrex52 Year of manufacture: 2017 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed ​​range - main spindle: 20 – 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 60 Feed rates: Rapid traverse (X/Y/Z): 42 m/min Operating hours: approx. 32,000 h Spindle hours: approx. 12,000 h Dkedpfxs Agr I Se Aiiow Technical features & accessories: - Active spindle cooling - Direct measuring system in all axes - Scraper-type chip conveyor - Internal coolant supply (ICS) 40 bar, includes: - Paper belt filter - 600 l tank - Cabin roof - Rotary union through spindle center - Air blast through spindle center - Wash-down gun - Mechanical oil and emulsion mist separator - Infrared touch probe, Heidenhain TS 649 (if present) - 3D quickSET preparation - Operating mode 4 - ATC – Application Tuning Cycle - Tool breakage detection TRS2 (if present) - Tracy Cylindrical surface interpolation - Lang RoboTrex 52 automation system Accessories, tools, and workholding devices shown are included in the scope of delivery only if this is stated in the additional information. Unless otherwise agreed, sales between B&B customers are always made without warranty.

Condition: excellent (used), Year of construction: 2023, operating hours: 12,320 h, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 4,020 h, spindle nose: SK 40, number of slots in tool magazine: 120, Universal Machining Center + Robot Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: 2023 / 2025 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed ​​range - main spindle: 20 – 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: Dia. 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 pos. Feed rates: Rapid traverse (X/Y/Z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4,020 h Technical features & accessories: - Active spindle cooling - Direct measuring system in all axes - Scraper-type chip conveyor with self-cleaning screen - Internal coolant supply (IKZ) 40 bar, comprising: - Paper belt filter - 600 l tank - Cabin roof - Rotary union in spindle - Duplex filter - Air blast through spindle center Dksdpfe Agr I Dex Aiiow - Rotating viewing window - Chip flushing gun - Oil and emulsion mist separator - Infrared touch probe, make Heidenhain TS 460 (if present) - Tool measurement - Heidenhain TT160 (if applicable) - 3D quickSET preparation - PH Cell automation interface, comprising: - Interface - 4-channel rotary union - Automatic loading door - Operating mode 4 - Tracy peripheral surface interpolation - PH 150 pallet loading/unloading system, comprising: - 10-station pallet magazine - External electronic handwheel (if applicable) Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Unless otherwise agreed, sales between businesses (B2B) are always made without warranty.

Condition: ready for operation (used), Year of construction: 2026, travel distance X-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 128, spindle speed (max.): 4,500 rpm, number of axes: 3, This new 3-axis KUNZMANN WF 610 M was manufactured in 2026. It features a longitudinal travel of 610 mm, cross travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with an electronically regulated main drive for the vertical milling spindle and a rigid angle table with a clamping surface of 800 x 425 mm. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 610 M universal machining centre. Contact us for further details. - New Machine- Main drive: Electronically regulated stepless main drive for vertical milling spindle- Spindle drive power: 8.5 kW (S1 - 100% ED) / 16.2 kW (S6 - 25% ED)- Tool interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 Form AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872)- Feed drives: Electronically regulated stepless servo drive per axis- Rapid traverse rate X / Y / Z: up to max. 5 / 5 / 4 m/min (stepless)- Table type: Rigid angle table (Winkeltisch, starr)- Clamping surface: 800 x 425 mm- T-slots: 6 x 14 H7 (pitch / spacing: 63 mm)- Max. table load: 300 kg- Vertical milling head: Swivelling +/- 90°, manually extendable quill with lever, stroke 70 mm (clampable), speed-dependent air cooling- Tool clamping: Automatic mechanical tool clamping, clamping force 10,000 N (hydraulic release)- Measuring system: Distance-coded linear scale systems, direct, incremental, resolution 0.001 mm- Safety handwheels: In all 3 axes- Electronic handwheel: Portable HEIDENHAIN HR 510 FS with integrated axis selection keys, feed rate potentiometer, and emergency stop button (including bracket on control panel)- Operating voltage: 400 V / 3-phase / 50 Hz- Nominal current / Backup fuse: 20 A / 25 A- Connected load: 13 kVA - Control voltage: 24 V- Base machine installation weight: approx. 2,000 kg (including fluids, without options/tools)- Max. transport weight: 2,100 kg- Coolant system: Free-standing container, capacity 66 liters- Central lubrication: Automatic central lubrication system with separate, easily accessible residual oil container- Work light: LED flexible arm lamp- Machine leveling elements: 1 set = 4 pieces Dkedj Afzixspfx Aiijw

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 450 mm z-travel 300 mm CNC-control Roeders RMS6 table-size 700 x 550 mm max. table load 800 kg spindle turning speed range 42.000 U/min feed stepless 0 - 30.000 mm/min rapid traverse 30 m/min drive capacity - spindle motor 14 kW tool change unit Pick-up 18 Pos. voltage 400 V total power requirement 20 kVA weight of the machine ca. 5,2 t dimensions of the machine ca. 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 Djdpfxo Adu Tzs Aiiokw - HSC spindle Fischer MFW1230/42 - Dust extraction system

Condition: used, Year of construction: 2017, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 750 mm, controller manufacturer: Heidenhain, controller model: TNC 640, overall weight: 15,300 kg, spindle speed (max.): 18,000 rpm, coolant supply: 38 bar, spindle motor power: 39,000 W, number of spindles: 1, number of slots in tool magazine: 117, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, Highlights: - High-performance motor spindle with 18,000 rpm - 117 HSK-A 63 tools in the system - Coolant high-pressure system (38 bar) _____ Base machine G350 AB Generation 2 Travel of the X-axis 600 mm Travel of the Y-axis 855 mm Travel of the Z-axis 750 mm Power supply 400 V, 50 Hz, TN-S Work area door, automatic, for manual and automatic loading/unloading Decentralized work area extraction Machine control HEIDENHAIN TNC 640 Swivel axis calibration GSC Swivel table (A-axis) Rotary table (B-axis), T-slots Motor spindle HSK-A 63, 18,000 min-1, 35/47 Nm, 29/39 kW GROB spindle diagnostics GSD Double disc magazine HSK-A 63 with 117 (57+60) tool positions Tool cleaning device Electromechanical tool length measuring device Chip conveyor with scraper band, discharge height 1,100 mm Coolant high-pressure system (5-38 bar, internal coolant) Compressed air supply through the spindle center Switchable coolant pressure booster for the nozzles in the motor spindle Oil skimmer for coolant maintenance Dksdpfx Aj Acanuoiisw Blow-off gun in the work area Flush gun in the work area Infrared measuring probe OMP60 (RENISHAW) Remote machine diagnostics with access control switch Warranty for 3 months

Condition: used, Year of construction: 2013, BAZ DMC 635V ecoline, year of manufacture 2013. Dkjdpfx Aez Tf Ehjiisw

Condition: used, Year of construction: 2008, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2008 Control : Heidenhain iTNC 530 Speed : 18000 rpm Dkjdpfx Aez Tbahoiiow Movement X/Y/Z : 600/770/805 mm Tool holder : HSK 63 In General: Year of manufacture:2008 Control system:Heidenhain iTNC 530 X/Y/Z travel:600/770/805 mm Spindle speed:18,000 Tool holder:HSK 63 Spindle: Technology:Direct drive spindle Speed:18,000 rpm Power:36 kW Torque:47 Nm Tool holder:HSK 63 NC swivel t able: A-axis:240° B-axis:360° Pallet size:400 x 400 mm Max. table load:300 kg Clearance:600 mm Tool magazine: Technology:Radmagazin Tool changer:Pick-Up Number of stations:40 Max. tool length:365 mm Max. tool diameter:72 (160) mm Equipment: Position Measurement Systems:Direct on all axes (glass scales) Automation:2-position pallet changer Chip Removal:Chip conveyor Coolant Supply:Internal coolant system Workpiece Measurement:Probe preparation Emulsion Mist Separator:Mechanical Setup Mode:Electronic handwheel

Condition: repair required (used), Year of construction: 2013, functionality: unexamined, machine/vehicle number: GM 5251/01-01 NEU 4541/01-08 ALT, travel distance X-axis: 550 mm, travel distance Y-axis: 655 mm, travel distance Z-axis: 685 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 75 m/min, feed rate Z-axis: 90 m/min, nominal power (apparent): 58 kVA, torque: 197 Nm, total height: 3,100 mm, total length: 4,000 mm, total width: 2,700 mm, table width: 1,300 mm, table length: 800 mm, table load: 1,070 kg, rotational speed (max.): 8,000 rpm, overall weight: 15,000 kg, spindle motor power: 25,000 W, spindle mount: MK 0, number of spindles: 2, number of slots in tool magazine: 72, tool length: 300 mm, tool diameter: 160 mm, tool weight: 8 g, input voltage: 400 V, type of input current: AC, Equipment: rotational speed infinitely variable, GROB G320EA22K – CNC Double-Spindle Horizontal Machining Center, 4 Axes The machine is stored in Hamburg. No CE marking, as it was originally intended for use in China. For sale is a GROB G320EA22K CNC horizontal machining center with two spindles and 4-axis machining. The machine is equipped with a Siemens 840D sl control system and is suitable for precise and efficient machining in industrial production. Technical data: Manufacturer: GROB Machine type: G320EA22K Machine type: CNC horizontal machining center Control system: Siemens 840D sl Number of axes: 4 Number of spindles: 2 Spindle distance: 550 mm Spindle manufacturer: Kessler Max. spindle speed: 8,000 rpm Spindle power: 20 kW (S1) / 25 kW (S6) Spindle torque: 159 Nm (S1) / 197 Nm (S6) Tool holder: HSK-A63 Tool magazine: 2 × 49 slots (98 tools) Max. tool diameter: 86 mm / 160 mm with limitations Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time chip-to-chip: 2.7 seconds Travel distances X/Y/Z: 550 × 655 × 685 mm Rapid traverse X/Y/Z: 65 / 55 / 90 m/min NC rotary table: Ø 800 / 1,300 mm Max. workpiece weight on the rotary table: 1,070 kg Rotary table speed: 25 rpm Positioning accuracy of axes: 0.006 mm Repeatability of axes: 0.004 mm High-pressure coolant system: 80 bar Dkodpfx Aez R Upfsiiow Coolant temperature control: available Filter fineness: 30 µm Machine dimensions (L × W × H): approx. 4,000 × 2,700 × 3,100 mm Machine weight: approx. 15,000 kg Installed power: 58 kW Compressed air requirement: 15 Nm³/h at 5 bar Additional equipment: Fully enclosed machine Closed-loop control of the axes Temperature monitoring and water cooling of the spindles Automatic tool changer Tool cleaning system Central lubrication for guides and ball screws Automatic, reversible high-pressure coolant filtration No CE certification, as it was originally intended for use in China.

Condition: like new (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, overall weight: 4,200 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,200 h, number of spindles: 1, Equipment: chip conveyor, The machine is rarely used and is in like-new condition, with only 1,200 spindle hours. Djdpfxjz R Sg Ue Aiiokw

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 5-AXIS CNC MACHINING CENTER WEMAS VZG 72-5A (YEAR OF MANUFACTURE 2019) Travel ranges: X = 720 mm, Y = 600 mm, Z = 520 mm. 5-axis milling and drilling. Multi-sided machining in conjunction with a rotary table, ø 720 mm. 60-position tool changer, automatic workpiece measuring probe. Glass scales in all axes. SK 40 with 12,000 rpm and 80 bar internal coolant. Dkodpfxoz Ri Ste Aiiew

Condition: good (used), Year of construction: 2014, functionality: fully functional, DMG Mori Sauer Lasertec 65 Shape Year of manufacture: 2014 X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 560 mm Control system: Siemens 840D sl Main spindle: Speed range – main spindle: 20 – 10,000 min/-1 Drive power – main spindle: 13 / 9 kW Max. torque: 83 / 57 Nm Tool interface: HSKA63 DIN 69893 NC rotary table: Table clamping surface: 800 x 650 mm Max. table load: Swiveling range / Rotational range T-slots: 600 B: +/- 120 C: 360 Max. workpiece dimensions: 650 (840) x 500 mm Tool magazine: Number of tool positions: 30 Dodpsz Ix Uqefx Aiiekw Max. tool weight: 6 kg Max. tool diameter: 80 mm Max. tool diameter with free neighboring position: 160 mm Max. workpiece length: 315 mm Tool change time (tool to tool): 1.6 sec Chip removal time: 8.0 sec Feeds: Rapid traverse: 40 m/min Feed force: 7/13/10 kN Feed rate: 1 – 40,000 mm/min Total power consumption: 24 kVA Machine weight: approx. 11.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Documentation Coolant system Electrical handwheel Laser head: 100 watts Laser operating hours: 6177 h / 2802 h Machine operating hours: 18703 h / 4738 h

Condition: used, Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: TNC 640, table load: 150 kg, spindle speed (max.): 20,000 rpm, spindle nose: HSK-A63, number of slots in tool magazine: 170, tool weight: 6,000 g, Universal Machining Center Manufacturer: MIKRON Type: HPM 450U Year of manufacture: 2017 Control: Heidenhain TNC 640 Technical details: X-axis travel: 600 mm Y-axis travel: 450 mm Djdpfoz Ic Afsx Aiiskw Z-axis travel: 450 mm B-axis: ° C-axis: 360° Spindle speed: 20,000 rpm Drive power at S1/S6 (40% duty cycle): 23/36 kW Torque at S1/S6 (40% duty cycle): 77/120 Nm Tool holder: HSK-A63 Number of tool positions: 170 Tool change time:

Condition: used, Year of construction: 2011, travel distance X-axis: 600 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (max.): 30,000 rpm, Universal Machining Center The offer includes 2 GROB G350 machining centers from the years 2011 and 2013. Manufacturer: GROB Type: G350 Year of manufacture: 2011 Control: Heidenhain iTNC 530 Technical data: - X-travel: 600 mm - Y-travel: 770 mm - Z-travel: 800 mm - Spindle speed: 30,000 rpm Technical features & accessories: - Disc-type tool magazine with 40 tool positions - Auxiliary tool magazine TM171 with 171 tool positions Dkjdpfx Aisz Hz Nneijw - SCHULER LMC600 pallet storage system (3/4 module) - 27 pallet storage positions, 3-level - 1 rotary setup station - SCHULER Pilot control system - 2 KNOLL 500K-1/10 chip conveyors Condition: Used Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 2016, Mazatrol Smooth Control, Table Size 700 X 500mm, Table Load 700 Kgs, Traverses X Y Z; 630 X 1100 x 600mm, Min-Max Distance Spindle to Table 100 -700mm, Dkodpfjz Ehzbox Aiisw C Axis 0.0001 Degrees, A Axis -120 ~ +30 Degrees, Spindle Power 22kW, Spindle Speed 18,000 Rpm, 30 Station ATC, Spindle Taper DIN 40, Coolant, Through Spindle Coolant

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 C-axis table rotation 360° B-axis table swivel -50° / +110° Spindle nose - table distance 150mm Table clamping surface Ø650 Table load max. 300kg Table slots 5 x 18H7 x 100 mm Centering bore Ø50 H7 x 30 mm Workpiece size max. Ø 520 x 330 mm Machine accuracy VDI I DGQ 3441* Positioning accuracy +/-0.006mm* Axis resolution 0.001mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive AC motor, direct drive Drive power (100% / 25% ED) 10.0/17.0 KW Speed range, stepless 20-12000 RPM Spindle taper SK 40 DIN 69871 Torque at (100% / ED) 63.7/108.6 Nm Axis drives: Axes X, Y, Z AC motors Axes B, C AC motors Travel speeds: Rapid traverse in axes X, Y, Z 36m/min Speed max. B-axis 25 RPM Speed max. C-axis 25 RPM Acceleration X, Y, Z 6.5m/s² Coolant system: External tool cooling via external nozzles Coolant tank 280l Operating pressure, external 0.9bar Coolant system, internal tool cooling DIN69871 Form A Operating pressure, internal coolant supply 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control Heidenhain iTNC 530, full simultaneous 5-axis configuration -Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Scraper conveyor with discharge height 800 mm • Spindle cooling - radiators - plate cooling for spindle motor - Full protective enclosure with canopy Tool magazine VZG 65 5A from Indunorm: Number of tools 100 with a tool length of up to 320mm / Convertible to 125 tools, then only 200mm tool length is possible. Tool diameter max. 80mm Tool diameter max. 130mm (with free adjacent spaces) Tool change with double gripper -Linear path measuring system in axes X / Y / Z (glass scale) -Direct encoder in axes B / C -Temperature compensation - IR measuring probe - 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double cartridge filter • Switchable filter cartridges • Filtration rating 10my Belt filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: 100 kg (35 kg) Handling weight max. Pallet capacity: 6 pallet spaces up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance 180mm Djdpfx Aioz Diq Ujiekw - Clamping force 4x12500N - Repeat accuracy 0.005mm - Axial load max. 4000kg • Zero point clamping plate 320 x 320 -Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, power chucks, and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary through-feed integrated in the table • pneumatic lines routed to the outside • Pneumatic maintenance unit • Control via M commands logical inputs/outputs prepared incl. 12 pallets 320x320 !!without tool holders and without tools!! WITHOUT clamping devices such as vises, etc. !! Machine ex works, without delivery and assembly, all information without guarantee, price plus legal value-added tax.

Condition: used, Year of construction: 2018, travel distance X-axis: 510 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 70 m/min, rapid traverse Z-axis: 70 m/min, feed length X-axis: 510 mm, feed length Y-axis: 600 mm, feed length Z-axis: 700 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 70 m/min, nominal power (apparent): 63 kVA, torque: 900 Nm, workpiece height (max.): 490 mm, workpiece diameter (max.): 535 mm, workpiece weight (max.): 200 kg, total height: 3,470 mm, total length: 4,150 mm, total width: 3,120 mm, table load: 200 kg, rotary table diameter: 450 mm, rotational speed (max.): 80 rpm, overall weight: 18,000 kg, distance between spindles: 540 mm, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 12,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We are offering this very well-maintained, twin-spindle, 5-axis machining center, MAG SPECHT 450 DUO, manufactured in 2018. Manufacturer: MAG / FFG Machine Type: SPECHT 450 DUO Year of Construction: 2018 Condition: very good Operating Hours: 15,908 hours Machine Number: X.0112.6552 Order Number: E.7500194.001 Wiring Diagram Number: E.7500194.001 Location: 36199 Rotenburg an der Fulda, Germany Inspection: possible under power The machine is designed as a highly productive, twin-spindle machining center for series production and features 5-axis machining, two working spindles, and HSK-A63 tool holders. Technical Data: Dsdjz Ar H Sjpfx Aiiskw Year of Construction: 2018 Machine Number: X.0112.6552 Number of Spindles: 2 Machining: 5-axis Tool Holder: HSK-A63 Travel X: 510 mm Travel Y: 600 mm Travel Z: 660 / 700 mm Axis Speed X/Y/Z: up to 70 m/min Spindle Distance: 540 mm B-/A-Axis: up to 80 rpm B-Axis Division: 360° x 0.001° Table Plate Diameter: 2 x 450 mm Table Load: 2 x 200 kg Max. Interference Diameter of Workpiece/Fixture: 2 x 535 mm Max. Workpiece and Fixture Height: 490 mm Max. Weight Moment at 90°: 900 Nm Tool Magazine: 112 tool positions HSK 63 Tool Diameter with Full Load: 75 mm Tool Diameter with Empty Spaces: 140 mm Max. Tool Length: 550 mm with front loading Max. Tool Weight: 12 kg Total Weight of Tools in Magazine: max. 420 kg Accuracy / Measuring System: Path Measuring System X/Y/Z: 0.0001 mm Positional Accuracy: 0.005 mm Positional Repeatability: 0.004 mm Machine Dimensions: Width: approx. 3,120 mm Length: approx. 4,150 mm Height: approx. 3,470 mm Machine Weight: approx. 16,000–18,000 kg Electrical Rated Power according to Nameplate: 63 kVA Operating Voltage: 400 V / 50 Hz The machine can be inspected under power at the Rotenburg an der Fulda location by appointment. Technical documentation is available. Sale from location. Subject to prior sale and errors in the technical data.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 860 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, feed length X-axis: 630 mm, feed length Y-axis: 730 mm, feed length Z-axis: 860 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, nominal power (apparent): 70 kVA, torque: 1,400 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece height (max.): 640 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 290 kg, total height: 3,650 mm, total length: 5,650 mm, total width: 3,560 mm, table width: 400 mm, table length: 400 mm, table load: 290 kg, rotational speed (max.): 80 rpm, overall weight: 25,000 kg, distance between spindles: 720 mm, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 12,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, For sale is a high-performance, two-spindle CNC machining center, MAG SPECHT 500 DUO LIMO PW, manufactured in 2017, with a pallet changer, two working spindles, and 5-axis machining capabilities. The machine has been used infrequently recently and is currently not in active production. It remains connected to the power grid, so an inspection while powered on is possible by appointment. Manufacturer: MAG / FFG Model: MAG SPECHT 500 DUO LIMO PW Year of manufacture: 2017 Condition: very good (original images dated September 15, 2026) Operating hours: 17,690 h Category ID: 1458 Type ID: 4166 Machine type: Universal machining center Technical data: Year of manufacture: 2017 Machine number: X.0112.6258 Control system: Siemens 840D SL Number of spindles: 2 Machining: 5-axis Design: LIMO PW Pallet changer Tool holder: HSK-A63 Travel in X: 630 mm Travel in Y: 730 mm Travel in Z: 860 mm Axis speed X/Y/Z: up to 120 m/min Spindle distance: 720 mm B-/A-axis: up to 80 rpm B-axis division: 360° x 0.001° Pallet size: 400 x 400 mm Table/pallet load: 2 x 290 kg Max. weight moment at 90°: 1,400 Nm Max. workpiece and fixture height with pallet changer: 640 mm Max. clearance circle workpiece/fixture: 2 x 700 mm Tool magazine: 112 tool positions for HSK-A63 Tool diameter with full load: 75 mm Tool diameter with empty spaces: 230 mm Max. tool length: 550 mm Max. tool weight: 12 kg Total weight of tools in the magazine: max. 420 kg Accuracy / Measuring system: Linear measuring system X/Y/Z: 0.0001 mm Positional accuracy: 0.005 mm Dodpfx Aisz Ar E Ijiskw Positional repeatability: 0.004 mm Machine dimensions: Width: approx. 3,560 mm Length: approx. 5,650 mm Height: approx. 3,650 mm Machine weight: approx. 22,000–25,000 kg Electrical rated power according to nameplate: 70 kVA Operating voltage: 400 V / 50 Hz If you have any questions or need more information, please send us a message or call us. Inspection while powered on is possible by appointment in 36199 Rotenburg an der Fulda. Technical documentation is available. Sale from the current location. Dismantling, loading, and transport can be arranged. Subject to prior sale, errors, and changes in technical specifications.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC machining center Kunzmann WF 650 Control system: Heidenhain iTNC 640 Year of manufacture: 2015 Internal machine number: 67 Travel ranges: X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Rotary table C-axis: Ø 400 mm Tilting range A-axis: +120/-95° Rotational range C-axis: 360° Tool holder: SK 40 DIN69871 Tool magazine: 40 positions Spindle speed: 1 – 12,000 rpm Spindle tilting range: +5 / -92° - Coolant system - Internal coolant - Electronic handwheel HR 510 FS Dkedpfx Aozwmbgoiiow - Chip conveyor

Condition: excellent (used), Year of construction: 2024, operating hours: 1,080 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 3,600 mm, total width: 3,000 mm, table load: 300 kg, rotary table diameter: 650 mm, rotational speed (max.): 25 rpm, overall weight: 9,800 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 700 h, coolant supply: 30 bar, spindle motor power: 23,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, The machine was used as a bridging machine because the customer ordered an MT EVO UDS80. This is already his second one. UDS65-5A 5-axis universal machining center with Rotary table with Heidenhain TNC640 - 12,000 rpm hybrid bearing direct drive, water-cooled - Torque 120 Nm (25% ED) - Drive power 23 kW (25% ED) - Separate spindle cooling for constant temperature - Tool holder DIN SK40 with blow-out function Rotary table: Dkjdezwkwlspfx Aiisw - Ø 650 mm - Direct measuring systems in C and A axes General: - 48-position tool changer with dual-arm gripper - Travel ranges X/Y/Z: 620/520/460 mm - Coolant and compressed air gun - Chip conveyor as a scraper conveyor - Coolant system - Electronic handwheel - Work area light IKZ, 30 bar, including paper band filter Heidenhain TS460 for SK40, Workpiece probing system with radio and infrared transmission Heidenhain TT460, tool probing system with radio and infrared transmission for tool measurement Heidenhain KinematicsOpt #48 Machine cover that can be opened, mechanically operated Incl. a large number of – approx. 100 – SK40 holders.

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 12,000 rpm, total height: 3,295 mm, total width: 3,200 mm, overall weight: 12,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: 31i-5, product length (max.): 3,537 mm, tool weight: 8,000 g, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DOOSAN VC 630/5Ax was manufactured in 2013. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a maximum workpiece weight capacity of 500 kg and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5Ax universal machining centre we have for sale. Contact us for further details. • Travels: A (tilt) +30° to -120°; C (rotation) 360° • Spindle nose to table: Standard 160–680 mm; with APC 210–730 mm • Spindle center to column guideway: 220 mm • Rapid traverse: X/Y/Z 40/40/36 m/min; A/C 20/30 rpm • Cutting feed: X/Y/Z 18,000 mm/min; A/C 7,200 deg/min • Table: Ø630 mm (standard); APC pallet 500 x 500 mm • Max workpiece: 500 kg; dimensions standard Ø730 x 500 mm; with APC Ø730 x 450 mm • Min table indexing: 0.001° • Spindle: Built-in; 12,000 rpm; ISO #40 7/24 BIG-PLUS (optional HSK-A63) • Max spindle torque: 204 N·m • Spindle motor power: FANUC 22/18.5 kW Dkjdpfszt Rwqjx Aiiew • ATC: MAS403 BT40 (options CAT40/DIN40); 40 tools (options 60/81/101/121); max tool Ø adj 80 mm, without adj 125 mm; max tool length 300 mm; fixed address; tool-to-tool 1.0 s; chip-to-chip 8.5 s

Condition: ready for operation (used), Year of construction: 2014, operating hours: 15,662 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller model: Heidenhain TNC530i, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 620 mm Travel range, Y-axis: 520 mm Travel range, Z-axis: 460 mm C-axis: 360° B-axis: -50° / +110° Rotary table diameter: 500 mm Spindle speed (max.): 12,000 rpm Spindle type: SK40 Number of spindles: 1 Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Heidenhain TNC530i Operating hours (see image) Control system operating hours: 38,569 h Machine operating hours: 37,263 h Spindle operating hours: 15,662 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Scraper-type chip conveyor Workpiece measuring probe Coolant system Compressed air via M-command Heidenhain handwheel Kinematic optimization cycle Dkodpfx Ajzr Nmbeiiow Note: The machine is sold without tools, vise, and clamping plate.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 350 kg, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 630 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 560 mm Tool magazine slots: 24 Tool holder: SK 40 Rotary range, C-axis: 360° Table clamping surface: 600 x 1,000 mm Table diameter: 600 mm Maximum table load: 350 kg Table weight: 800 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 T-slot spacing: 63 mm MACHINE DETAILS Number of axes: 5 (3+2) Dodpfx Aiezpxdweiekw EQUIPMENT Controlled NC swivel milling head (B-axis) NC rotary table integrated in the fixed table (C-axis)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,514 h, spindle speed (max.): 18,000 rpm, overall weight: 20,000 kg, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2021. It features an X-axis travel of 670 mm, Y-axis travel of 820 mm, and Z-axis travel of 600 mm. The machine is equipped with a Heidenhain TNC 640 control unit and has a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U universal machining centre we have for sale. Contact us for further details. Dkjdpfx Asznktusiiow - Coolant Supply: 40 bar- Nominal Power: 90 kVA- Input Voltage: 400 V, 50 Hz (3-Phase)- Full Load Current: 125 A- Max. Current Load: 200 A- Short-Circuit Strength: 25 kA- Included Equipment: Documentation/Manual, Chip Conveyor, Coolant System & Filtration Unit- Condition: Very good, fully functional; completely inspected by manufacturer at the end of 2025 (receipts available)- Spindle Hours: 11,514 h- Machine Power-On Hours: 20,954 h- Control Power-On Hours: 22,231 h- Usage History: Exclusively soft-annealed tool steels (no hard or dry machining)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 6LUD-321, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik ONE, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Demonstration machine Dedpfx Aezdddgeiiokw Axon LU 620 features: - Siemens Sinumerik ONE - 5-axis simultaneous machining - Heidenhain glass scales in all 5 axes - Kinematic Optimizer - 15,000 rpm direct drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar internal coolant system - Air supply through the spindle - Media supply through the center of the table - Automatic workpiece measurement system Renishaw OMP 40 - Laser tool breakage detection system Blum NT A-3 Split - Paper band filter system - Ring flushing system on the spindle - Automatic side door - 60 magazine positions - SK40 - Drag chain chip conveyor - Chip flushing - Dust extraction system