Aghili Drucktechnik

Year of construction: 2004, condition: ready for operation (used), Max. web width: 330 mm Gsdjy Shz Hspfx Anksub Min. / max. paper weight: 90 – 160 g/m² Max. unwind roll diameter: 700 mm Max. rewind roll diameter: 400 mm Core diameter: Unwind: 76 mm / Rewind: 76 mm Max. speed: 230 m/min Description: Unwind unit, splicing table with clamping device, web guiding and web tension control (including automatic web fixing during stop operation), single punching station (no tools included) with rewind for the punching grid, up to 12 slitting knives in a cutting unit with separators for slitting and/or longitudinal cutting of the rolls, extended operator panel for settings, counter (labels or meters) as well as inspection control (missing label detection) with visual check, 2 driven rewind shafts for fast and efficient production. All safety devices are installed on the machine.

Condition: ready for operation (used), Max. Web Width: 250 mm Gujdpey Shzysfx Ankob Min. / Max. Paper Weight: 90 – 160 g/m² Max. Unwind Roll Diameter: 700 mm Max. Rewind Roll Diameter: 400 mm Core Diameter: Unwind: 76 mm / Rewind: 50 & 76 mm Max. Speed: 230 m/min Description: Includes unwind station, 2 splicing tables with clamping devices, web guiding and web tension control (including automatic web fixation during stoppage), up to 7 razor blades in a cutting unit with separators for slitting and/or longitudinal cutting of rolls, a simple control panel for adjustments, counters (labels or meters), as well as an inspection control system (faulty label detection) with stroboscope for visual inspection, and a rewind station for fast and efficient production. The machine is equipped with all necessary safety devices.

Year of construction: 2008, condition: ready for operation (used), machine/vehicle number: LF 020, Min. / max. web width: 150 – 330 mm Min. / max. paper weight: 90 – 160 g/m² Max. unwind roll diameter: 1000 mm Max. rewind roll diameter: 400 mm (300 mm when using the 3-shaft turret) Gedpfoy Shztjx Ankeub Core diameter: Unwind: 76 mm / Rewind: 40, 45 and 76 mm (3 sets of 3 shafts) Max. speed: 200 m/min Description: Unwind with splicing tables and clamping devices, web guiding and tension control (including automatic web clamping during stop operation as well as dancer rollers), up to 12 rotary or 12 stationary knives within a pneumatically controlled slitting unit, edge trim extraction, interactive digital control panel with color touchscreen, program memory, settings management, counting functions (labels or running meters), and inspection control (missing label detection), fully automatic 3-shaft turret rewinder for non-stop operation. All required safety devices are installed on the machine.

Condition: used, functionality: fully functional, Limitless hot stamping machine / foil stamping press. Industrial hot foil stamping machine suitable for printing and branding applications. Gusdpfxoy Sg Hns Ankob Machine details: Manufacturer: Limitless Hot Stamping Machines Model: 360B 240V 1050 watts Industrial production unit Suitable for: foil printing hot stamping packaging decoration leather goods plastics promotional products industrial marking Commercial production machine from operational facility. Sold as seen / untested.

Year of construction: 2018, condition: refurbished (used), The UniNet iColor® LF900 Finisher offers all essential finishing functionalities: • On-demand digital label finishing for media up to 350 mm wide • Integrates key finishing technologies: lamination, contour cutting, weeding, slitting/separating, and rewinding • Custom cutting: supports user-defined cutting paths • Perforation capability • High productivity with impressive throughput: up to 1.5 times faster than standard systems • Optional dual cutting head available for increased throughput and flexibility • Variable slitter/blade with easy adjustment for slitting rolls • Compatible with all roll-to-roll labels up to 350 mm (14") width Gsdpfx Anoy Nmt Njksub • User-friendly control panel for intuitive navigation of various menus and functions

Year of construction: 2011, condition: ready for operation (used), A digital roll label color printing machine Xeikon including a Hunkeler unwinding module is available. Resolution X/Y: 1200/3600dpi, max. print width: 322mm, material width range: 200mm-330mm, max. repeat length: 55m, max. printing output: 380m²/h, material weight range: 40g-350g/m². Unwinding unit Hunkeler UW6-C 7199, year of manufacture: 2011, max. roll diameter: 1370mm, web width: 520mm, web speed: 220m/min, max. roll weight: 600kg. Documentation available. An on-site inspection is possible. Guodpfxoy Igc Ij Ankjb

Year of construction: 2017, condition: good (used), Finishing machine for digitally printed labels - Web width: 340 mm (max.) - Full-rotary speed: 120 m/min. (max.) - Repeat length: 152 - 457 mm (max.) Unwinder: - Electronic web guide control system - 3''/76 mm shaft with magnetic brake - Roll diameter Ø 700 mm (max.) Rewinder: - 2 x 3''/76 mm shafts with magnetic brake - Roll diameter: 2 x Ø 600 mm (max.) - Automatic web tension control - 1 x 3''/76 mm shaft, matrix removal/waste UV Flexo Unit, full-rotary: - Servo-driven printing unit - Automatic register control - UV curing unit - 1 x anilox roller - 1 x plate cylinder Cold foil/laminating station: - 2 x 3"/76 mm shafts - Wet lamination / cold lamination - Laminate/delaminate Die-cutting unit, full/semi-rotary: - Die-cutting width: 330 mm (max.) - Die-cutting tolerance: +/- 0.15 mm - Magnetic cylinder: 22"/176 teeth - Automatic register control - Servo control Gedoy Id T Depfx Ankeub Slitting unit: - Razor blade slitting - Shear knife slitting

Year of construction: 2007, condition: good (used), • Gallus TCS 250 • Year of manufacture: 06 / 2007 • Made in: Switzerland • CE marking: Yes _____ Printing Technology This machine utilizes Letterpress (Typographic Printing) technology: _____ Configuration • Narrow web label printing press • Approx. 250 mm web width • Modular Gallus TCS platform • Designed for continuous label production _____ Technical Data (according to available information) • Web width: approx. 250 mm • Active machine length: approx. 5 m Gujdpfx Asy Idt Donksb • Machine condition: used _____ Condition The machine is reported to be in working condition. However, no recent service or inspection report is available. _____

Year of construction: 2004, condition: good (used), Year: 2004 Configuration: Semi-rotary waterless offset press with integrated finishing units, suitable for short and medium run production with high flexibility. Technical Data: • Max. web width: 340 mm • Repeat length: 150 mm (6”) up to 305 mm (12”) • Semi-rotary execution (GAP-MASTER system) Printing & Finishing Units: • 6 x Offset units • Rotary screen unit Gjdpfxoy Idprj Ankjub • Flexo UV varnish unit • Hot foil unit • Semi-rotary die-cutting station Drying & Systems: • 8 x UV drying units • Complete IST UV system • Technotrans ink temperature control unit • Chiller Machine Equipment: • Unwind unit • Splice table • Web guide • Slitting unit • Waste matrix rewind • Product rewind General Remarks: The machine is suitable for a wide range of applications, including high-quality labels with various finishing options such as screen printing, varnishing, and hot foil stamping. The semi-rotary concept ensures efficient production, particularly for short run jobs.

Year of construction: 2020, condition: excellent (used), Weber Legi-Air 4050E CC (Gen.3) – automatic print and apply labeling system with support frame For sale: Weber Legi-Air 4050E CC (Gen.3) – a professional industrial print and apply labeling system designed for automatic product labeling in production lines. Manufactured by Weber Marking Systems, this unit is designed for continuous operation in demanding industrial environments. The machine provides highly precise and efficient label printing and application, making it ideal for packaging and product identification processes. Technical data: Manufacturer: Weber Marking Systems GmbH Model: Legi-Air 4050E CC (Gen.3) Godpfoy Ickbsx Ankoub Year of manufacture: 2020 Print resolution: 203 / 300 / 600 dpi Maximum print speed: up to 400 mm/s Capacity: up to 240 labels/min Application accuracy: ±0.8 mm Minimum label size: 10 x 5 mm Maximum label size: 160 x 350 mm Maximum applicator arm reach: 400 mm Power supply: 100–240 V AC / 50–60 Hz Power consumption: 700 W Operating pressure: 6 bar Air consumption: 0.1 – 3 l / cycle Additional information: sturdy support frame included, height adjustment on the legs and on the support column, maximum labeling head height on the support frame: approx. 140 cm from the floor, can operate in four directions: left / right / up / down. TAG: industrial labeler, labeling system, label printer, print and apply system, Weber Legi-Air, Weber Marking Systems, Avery Dennison labeler, Zebra label printer, Sato labeling machine, Novexx labeling system, Videojet label applicator, Domino print and apply, automatic label applicator, carton labeling machine, production line labeler, industrial labeling machine, packaging label applicator, automatic print and apply, product labeling system, industrial label applicator

Condition: used, - 5 printing units - 1 varnishing unit Gedpfjy H U Uijx Ankoub - 6 UV dryers (air-cooled) - Rotary die-cutting unit - GAP Master - BST video web inspection Full rotary: 355.6 mm Maximum web width: 340 mm Minimum web width: 120 mm

Condition: new, Year of construction: 2023, functionality: fully functional, JWEI RSF-330 Digital Label Cutter The JWEI RSF-330 is a digital label cutter designed to cut label materials into any required size. It is an ideal companion for the AccurioLabel 230 printer. Key Features: Unique solution: The only system equipped with 8 cutting heads in a single line, enabling efficient cutting of even small labels at maximum speed. Automatic cutting head distribution: No need for a fixed number of graphic columns—the system intelligently selects the optimal cutting layout. Automatic deviation correction: Dual-color coded electronic “eye” scanning system ensures accurate alignment and smooth feeding. Automatic lamination: Built-in cold lamination allows multiple processes in a single pass. QR code recognition: Automatically identifies different job files via QR codes. Automatic positioning: Fast detection of crop marks for precise cutting. Guedpfey Hp Nnex Ankeb Automatic slitting: Roll-to-roll slitting mode allows labels to be cut into separate rolls or sheets. Automatic waste removal: Continuous waste removal keeps production clean and efficient. Technical Specifications: Max. cutting size: ≤ 330 mm × 1000 mm Cutting heads: 8 pcs Slitting blades: 7 pcs Cutting speed (plotting): ≤ 12 m/min Slitting speed: ≤ 60 m/min Repeat accuracy: ±0.1 mm Registration marks: square / dot / QR code / barcode Supported formats: DXF, AI, CF2, HPGL Machine dimensions: 2000 × 1150 × 1600 mm Weight: 1300 kg

Year of construction: 2007, condition: like new (used), Unwinder with paper splicing table 6 letterpress printing units 1 flexo printing unit Gujdpoy Hiagjfx Ankob Semi-rotary die-cutting unit Inspection system with freeze frame Semi-rotary electronic advance Finishing section with independent electronic advance, comprising: Flat hot stamping unit Laminating unit Flatbed die-cutting / embossing unit Waste removal / rewinder with longitudinal slitting Various spare parts

Condition: used, Year of construction: 2011, Web Width: 850 mm 1. Unwinding and Infeed System - Unwinder with constant web tension control - Web guiding and stabilization unit - Electronically controlled infeed system with precise tension regulation - Complete drive package for accurate web handling 2. Rewinding System - Single-shaft rewinder, max. roll diameter: 1000 mm - Constant tension control for stable winding 3. Surface Treatment & Web Cleaning - Corona treatment unit for surface energy optimization (pre-print) - ACE single-sided contact roller web cleaner for dust and particle removal 4. Printing Units Flexographic Printing Section - 8 flexo printing units with: - Central impression drum - Removable ink drawer (excl. anilox rollers) - Optional flexo features: - Explosion-proof configuration (per print station) - Drum cooling system - Lightweight anilox rollers: - 5 units (195–300 lpi) with gear - 5 units (>300 lpi) with gear - 24 print sleeves with cams - 2 additional ink drawers (tray + rubber roller) - 1 trolley for ink drawers (3 slots: 2 in use + 1 reserve) Special Flexo Units - 1 cold foil trolley - 1 movable cold foil unit (can be positioned at any print station, rail-free design) Rotogravure Printing Section - 1 rotogravure station for front- or reverse-side printing, includes: - Reversing bar for reverse-side printing - Designed for PETROCOLL cold-seal coating (2.8–3.2 g/m² at 180 m/min on paper) - Rotogravure trolley for mobile positioning - Extended hot air drying system: - “Super Hood” with 32 high-efficiency blowers - Methane gas burner for heating - Integrated cooling unit - Electrostatic assist for ink transfer - 3 rotogravure print sizes (16”–26”) - Solvent ink viscometer - Pump and ink supply tank 5. Drying and UV Curing - 8 UV curing units, 22 kW each (one per print station) - Integrated cooling for UV lamps - Drum cooling for heat-sensitive substrates 6. Die-Cutting and Finishing Units - Rotary die-cutter, working width up to 530 mm - Base unit for die station - Trim removal system (up to 530 mm wide) - Matrix waste pressure system (limit: 530 mm) 7. Slitting Section - Shear (scissor) slitting system - 6 Helios box knives with self-sharpening counter blades 8. Electronic Control & Inspection - OMET electronic register control for 8-color operation Gjdpfey Ey Nisx Ankeub - Includes “gate” function for accurate registration - Vision system for real-time print inspection - Motorized E+L Elscan camera for high-resolution web monitoring 9. Safety and Compliance - Complete CE-compliant safety guards and emergency stop systems - Designed for ergonomic operation and rapid job changeovers

Condition: used, Used for marking spacers in insulation production • Model – 1710 • Serial number: 2009007C19ZH • Immediately operational • Still connected, flushed regularly Gsdpfx Anjy Ddhgskoub • The machine will only be disconnected after the sale to prevent drying out • Price on request

Condition: good (used), Year of construction: 2008, OMET Year of manufacture: 2008 Printing process: UV flexo Condition: Used – very good condition (single owner) Location: Italy _____ Machine Configuration • 8 x UV flexo printing units • UV curing system • 2 x die-cutting stations • 1 x Gap Master system • 1 x additional die-cutting unit for sheet-off • Sheet delivery with evacuation conveyor • Turn bar (web turner) • 3 x corona treatment units • Chilled impression cylinders with integrated chiller • Suitable for adhesive label printing _____ Equipment & Tooling • 3 sets of tooling • 10 anilox rollers • 3 magnetic cylinders _____ Technical Highlights & Advantages This OMET Flexy 330 offers a robust and versatile configuration, ideal for a wide range of label applications. Key advantages: • 8-color configuration for high flexibility • Corona treatment for improved ink adhesion • Chilled impression cylinders for consistent print quality • Well-maintained machine from single owner • Currently in production – inspection and testing possible This machine represents a cost-effective solution for converters seeking a flexible and efficient printing line. Gedeyyn Snepfx Ankoub _____

Condition: good (used), Year of construction: 2010, functionality: fully functional, OMET FlexyServo 330 mm Year of manufacture: 2010 Printing process: Servo-driven UV flexo Condition: Used – excellent condition Location: Europe _____ Machine Configuration • 6 x UV flexo printing units • 6 x GEW UV drying units • Double die-cutting stations • 1 x Gap Master system • Turn bar (web turner) • Sheet-off unit with additional die-cutting station • Suitable for adhesive label production _____ Equipment & Tooling • 6 sets of tooling • 6 anilox rollers • 3 magnetic cylinders (currently in production) _____ Technical Highlights & Advantages This OMET FlexyServo is a modern servo-driven flexo press offering excellent register accuracy and efficient production performance. Key advantages: • Servo technology for high precision and reduced waste • Strong UV drying system (GEW) Gusdjyyn Rwjpfx Ankjb • Flexible configuration with multiple die-cutting options • Well-maintained machine in excellent condition • Immediate availability with testing possible This machine is ideal for converters looking for a reliable and efficient narrow web solution. _____

Condition: good (used), Year of construction: 2002, OMET Varyflex 520 Year of manufacture: 2002 Web width: 520 mm Printing process: Servo-driven flexo (sleeve technology) Condition: Used – good working condition Location: Europe _____ Machine Configuration • 8 x flexo printing units (servo-driven, sleeve system) • Drying system: 7 x UV LED + 1 x conventional UV • Water-based ink compatible • 2 x die-cutting stations • 1 x additional die-cutting unit for sheet-off system • Sheet delivery with evacuation conveyor • Cold foil unit • In-line slitting system (scissor type) • Double rewinder (dual shaft) • Web inspection camera system • Chilled impression drums • Integrated chiller unit • Ink preheating system _____ Equipment & Tooling • 5 sets of sleeves Gujdoyyn Ipopfx Ankob • 12 anilox rollers • 5 magnetic cylinders _____ Technical Highlights & Advantages This OMET Varyflex 520 offers a very flexible configuration, making it suitable for a wide range of label applications.

Year of construction: 2014, condition: good (used), DT250 Slitter / Rewinder Year of manufacture: 2014 Machine type: Tabletop slitter rewinder for narrow web label materials Condition: Used – in good working condition Technical Data Maximum web width: 254 mm Maximum unwind diameter: 450 mm Maximum rewind diameter: 360 mm Rewind shafts: 2 × 76 mm 1 × 40 mm Slitting system: Rotary shear slitting with knife holders Accessories and Tooling Spare slitting knives included Core adapters included Machine Dimensions Length: approx. 1300 mm Depth: approx. 700 mm Height: approx. 600 mm Application The Daco DT250 is designed for finishing self-adhesive label materials and is ideally suited for digital label production environments such as HP Indigo, Konica Minolta AccurioLabel, Xeikon, and similar presses. Typical applications include: Gjdpfeyt H R Iox Ankeub - Slitting wide master rolls into multiple narrow label rolls - Rewinding and roll inspection - Production of finished label rolls for customers - Converting digital label print jobs into finished products Advantages of this Machine - Compact and space-saving tabletop design - Ideal for small and medium-sized label converters - Reliable and user-friendly operation - Suitable for a wide range of self-adhesive label materials - Cost-effective finishing solution for digital label production

Condition: ready for operation (used), functionality: fully functional, Cutting machine, stack cutter Polar - Mohr CE 92 Cutting width: 92 cm Programmable cutting Two-hand operation / dead man's switch Fully operational with three spare knives. Weight approx. 2.5 t Manual available Additional cutting sticks included Year of manufacture probably after 1972 Can also cut plastics Gusdpoyr Itnefx Ankeb Machine can be inspected under power

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, product width (max.): 250 mm, working width: 247 mm, number of drawers: 4, roll width: 250 mm, roll diameter: 600 mm, inner diameter: 76 mm, EDALE ALPHA 250 year 2007 web width 250mm 4 - color 4 - IR dyer's 2 - die stations 4-anilox 4 doctor blades web camera slitting web guide 2 sets of print cylinders 8pcs Gjdpfx Ansyrzy Uskeub 2 magnetic cylinder condition very good In production Can be see any time

Year of construction: 2014, condition: good (used), Machine Type: Web Finishing Line Year of Manufacture: 2014 Working Width: 520 mm Location: Labelpressshop/Germany Machine Configuration Dispensing Unit • Feeding unit for self-adhesive materials Die Cutting Unit • Die cutting station equipped with 24 inch magnetic cylinder Slitting Unit • Slitting station for separating the continuous web into individual lanes Condition Gjdpfx Ajyrq I Uenkjub • Machine in fully functional condition • Currently still in production • Short-term availability possible • Documentation available Machine Highlights • Reliable web finishing system from the French manufacturer GIC • Suitable for processing self-adhesive label materials • Integrated die-cutting solution with magnetic cylinder • Slitting unit for flexible finishing possibilities • Solid industrial design and easy operation • Ideal addition to digital or flexographic label production lines

Year of construction: 2007, condition: good (used), PRATI LF 330 Machine Type: Label finishing / inspection rewinder Year of Manufacture: 2007 Serial Number: LF012 Machine Type Code: LF330-C0-N0-T0-0-0P0-5-009 Location: Germany Condition: Used – good working condition Unwinding Unit • Shaft unwinder for self-adhesive label rolls • Pneumatic expanding shaft • Adjustable tension control • Suitable for narrow web label rolls Web Guiding System • Electronic web guiding system for precise web alignment • Edge guiding sensors installed Inspection Table • Large illuminated inspection table • Designed for visual inspection of printed labels • Enables removal of defective labels during the inspection process Slitting System • Razor blade or shear slitting system (depending on configuration) • Adjustable slitters for multiple lanes • Suitable for narrow label formats Rewinding Unit • Differential rewind shafts • Independent tension control for multiple rolls • Designed for rewinding several finished label rolls simultaneously Control Panel • Operator control panel for machine speed and tension adjustment • Emergency stop and safety control system Safety Equipment • CE certified machine • Safety guards and emergency stop systems installed Maximum Web Width: 330 mm Power Supply: 400 V – 3 Phase Frequency: 50 Hz Installed Power (Pn): 3.4 kW Nominal Current (In): 7 A Maximum Current (Imax): 9 A Gsdpsyrg S Ajfx Anksub Short Circuit Current (Isc): 120 kA Machine Weight: approx. 2,200 kg Typical Applications • Final inspection of printed labels • Slitting of narrow web label rolls • Rewinding finished labels into customer roll formats • Converting and finishing of self-adhesive labels Advantages of PRATI Finishing Machines PRATI machines are widely recognized in the label converting industry for their robust construction, precise tension control and excellent operator ergonomics. The LF series allows efficient inspection and finishing of label rolls, reducing waste and ensuring consistent product quality before delivery. Thanks to the reliable web guiding and differential rewind system, the machine ensures

Year of construction: 2006, condition: good (used), ABG Digicon 1 Year of manufacture: 2006 Machine type: Label converting and finishing machine Condition: Used – good working condition Location: Germany Technical Configuration  Die-cutting station – 152 teeth  Semi-rotary operation possible  Full rotary operation possible  1 UV curing unit  1 air dryer  Lamination unit installed  Cold foil possible (rollers missing)  Crush knife slitting system Equipment Guodpfsyrg Rfex Ankob • 1 anilox roller – 140 lpi / volume 8.5 • 2 print cylinders • 4 varnish cylinders • 4 ink trays • 1 additional fountain roller • Core holders: – 2 × 40 mm core – 2 × 45 mm core – 4 × 76 mm core Application and Advantages The ABG Digicon is a well-known converting platform designed for efficient label finishing. It is suitable for: • Rotary and semi-rotary die cutting • Varnishing and coating applications • Lamination processes • Slitting and rewinding Thanks to its flexible configuration, the machine allows label converters to efficiently perform finishing operations after printing, increasing productivity and reducing handling steps. ABG is recognized worldwide as a specialist in finishing and converting equipment for the label industry, known for precision engineering, reliability, and long service life.

Year of construction: 2005, condition: good (used), Year of manufacture: 2005 Machine type: Label converting and finishing machine Condition: Used – good working condition Location: Germany Technical Configuration: • Die-cutting station – 152 teeth • Semi-rotary operation possible • Full rotary operation possible • 1 UV curing unit • 1 air dryer • Lamination unit installed • Cold foil application possible (rollers missing) • Crush knife slitting system Equipment: • 1 anilox roller – 140 lpi / volume 8.5 • 2 printing cylinders • 4 lacquer cylinders • 4 ink trays • 1 extra fountain roller • Core holders: – 2 × core 40 mm – 2 × core 45 mm – 4 × core 76 mm Application and Advantages: The ABG Digicon is a renowned converting platform engineered for efficient label finishing. Suitable for: • Rotary and semi-rotary die cutting • Varnishing and coating processes Godpfxoyrg Nzo Ankeub • Lamination • Slitting and rewinding With its flexible configuration, the machine enables label converters to efficiently perform post-printing finishing operations, enhancing productivity and reducing handling steps. ABG is globally recognized as a specialist in finishing and converting equipment for the label industry, known for precision engineering, reliability, and long service life.