AKK Anlagen- und Maschinenhandel

Condition: new, Year of construction: 2026, Top quality made from high-strength structural steel Q355, including plasma nitriding and calibration. 3D perforated table 4000 x 2000 x 200mm, 100mm grid, plate thickness 20mm, hole diameter 28mm. Surface finish machined, very robust, weight approx. 2400 kg. With table base, adjustable in 8 positions. Price excludes accessory set, surcharge €500. Packed in a wooden crate, shipping on request. The stated price refers to the table in standard version without plasma nitriding (last 4 pictures). Price for high-strength steel Q355, stainless and impact-resistant including plasma nitriding: surcharge €1800 (as shown). Csdoyg Ex Depfx Abbsgn

Condition: new, number 96 Positionen weight 600 kg condition neu 28 mm Special 31-piece set, 28mm system, consisting of: 1x Tool trolley 10x Locking pins 10x Ball lock pins 3x Professional screw clamps, 300 x 150mm 3x Professional screw clamps, 300 x 200mm 2x Professional pipe clamps, 180° Cedpsygxz Sofx Abbjgn 2x Professional pipe clamps, 45° Material: Burnished quality steel ATTENTION!!! Tools are designed for 25mm thick tabletops.

Condition: used, Year of construction: 1992, table diameter 600 mm table load 250 Kg swivelling range 0 - 135 Grad turning speeds 0,03 - 2,0 U/min connected load frequency 400 V weight 0,4 t Dimensions (LxWxH) 1,1 x 0,9 x 1,0 m Welding turntable including: - Foot switch Cgjdpfx Aboygxzrebon - Wired remote control - 315mm chuck

Condition: new, Year of construction: 2026, Premium-class welding turn and tilt table with through hollow shaft - available in conventional or PLC-controlled versions Rated load capacity: 200 kg Faceplate diameter: 400 mm Hollow shaft passage: 80 mm Cedsyf U T Uspfx Abbogn Tilting range: up to 135° Faceplate rotation speeds: 0.4 to 4 rpm, steplessly adjustable or programmable Maximum welding current transmission: 400 amps at 60% duty cycle Drive power: 900 watts Weight without control unit: 105 kg Equipped with: - Portable control unit with safety dual foot pedal and control console with emergency stop - Rotary potentiometer - Switch for forward and reverse rotation - Switch for slow/fast operation - Switch for rotation with or without welding

Condition: ready for operation (used), Year of construction: 2006, operating hours: 11,755 h, functionality: fully functional, machine/vehicle number: 12543, type of input current: AC, load capacity: 1,000 kg, input voltage: 400 V, type of cooling: water, Severt Welding Robot OTC-IRB-AX-V 6 L - Suspended 6-axis arm on 8m traversing system - OTC Daihen controller, software update from AX-C to AX-2 - 2 stations, each with a 1-axis positioner rated for 1000kg load and 1000Nm torque - Power source: OTC DP 500, 100% duty cycle at 350A, 60% at 500A - Push-pull torch - Touch sensor - Seam tracking sensor - Water-cooled gas nozzle - Wire feeding via rolliner - Torch alignment gauge included Cedpsydc Eiofx Abbegn - Various accessories: hose packages, wire guide spirals, contact tips, gas nozzles, etc. Dismantling / transport, etc. is to be arranged by the buyer.

Condition: new, Year of construction: 2026, Welding torch holder bracket for welding positioners and rotators The welding torch holder bracket is a robust accessory designed for use with welding positioners and welding rotators. Its design ensures stable and precise guidance of the welding torch, which directly improves ergonomics, repeatability, and the overall quality of the welding process. Key advantages of the welding torch holder bracket 360° rotating clamping head allowing free adjustment of the welding torch relative to the workpiece. Multi-axis adjustment – vertical and horizontal movement enables precise positioning of the working setup. Stable yet lightweight construction made from a high-quality aluminum alloy. Resistance to high temperatures and impacts, essential during intensive welding operations. Compatibility with welding positioners and rotators, increasing workstation functionality. Design and manufacturing technology The bracket frame is made of a durable aluminum alloy that combines low weight with high mechanical strength. The material resists permanent deformation caused by heat and ensures stability even under long-term loads. The rotating clamping head allows quick and secure fastening of the welding torch, eliminating the risk of movement during operation. Cedpfxjyb Drlo Abbogn Precision and work efficiency Using the welding torch holder bracket together with a welding positioner or rotator significantly improves process control. Continuous torch guidance reduces operator fatigue, increases weld repeatability, and helps maintain the optimal welding angle. The adjustable design allows quick adaptation to changing technological requirements. Applications The welding torch holder bracket is used in: Welding stations equipped with welding positioners Welding rotators for cylindrical workpieces Manufacturing and assembly plants Specialized workshops and semi-automatic production lines Standard equipment Welding torch holder bracket 360° rotating clamping head Technical data Height: 600 mm Width: 215 mm Weight: 3 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 0119-2207-0001-7, load capacity: 100 kg, total height: 1,500 mm, total length: 1,200 mm, total width: 600 mm, type of input current: AC, rotary table diameter: 300 mm, overall weight: 300 kg, height adjustment type: mechanical, table load: 100 kg, pivoting range: 90 °, disc diameter: 300 mm, product height (max.): 1,500 mm, welding current (max.): 400 A, Equipment: documentation/manual, see images in the attachment Codpjya Urgsfx Abbsgn

Condition: refurbished (used), Year of construction: 2010, HOLTEC round timber infeed LINCK infeed conveyor EV40 LINCK V40 LINCK turning device DV55 LINCK infeed conveyor EV40 LINCK V40 LINCK double profiling unit VPP34 LINCK circular saw VS66 Cedpoyat R Usfx Abbsgn LINCK board separator SEA LINCK turning device DV35 LINCK centering unit ZZP LINCK double profiling unit VP34 LINCK circular saw MKV LINCK splitter wedge SEK

Condition: good (used), Year of construction: 2002, max. load capacity 10,000 kg Dimensions (LxWxH): 2700 x 2000 x 2300 mm Cedpfxjyaarxs Abbegn

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei 5010 € 96.69 € 100 kg 150 mm 150 mm 360 ° 120 kgm 230 / 50 V / Hz 0.25 kW 0.25 kW 0.1 - 3 U/min 30 s 350 mm M12x6 mm 690 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed Codpfjx Urqwox Abbsgn - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, Year of construction: 2025, neu 2025 Cedpfxex Urqke Abbegn 020156 prompt, Zwischenverkauf v Türkei 6720 € 129.7 € 1 250 kg 205 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm 1000 mm 700 mm 1700 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) INCL. FOLLOWING OPTION: Pneumatic centering attachement

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei 24400 € 468.48 € 3000 kg 150 mm 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW 1.1 kW 1200 mm 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Cgjdpfx Abox Urqdoben Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Codpfxex Urpmo Abbjgn Türkei 6320 € 121.98 € 1 250 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: good (used), Year of construction: 1986, machine/vehicle number: 205891, Offer 25396 Technical Specifications: - Load capacity: 250 kg - Faceplate diameter: 600 mm - Table height in horizontal position: 910 mm - Faceplate continuously tiltable by hand crank - Faceplate rotational speed electrically variable: 0.2 – 2 rpm - Welding current transmission: 300 A - Drive: 220 V - Right and left rotation - Electric foot switch Cjdpfx Aex Tqblobbogn - Space requirement: approx. W 800 x H 910 x D 1,200 mm - Weight: approx. 150 kg

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 10,000 kg, Column lifting and rotating device with 10-ton or 15-ton load capacity, available as a set or individually. Both sides powered. The machine is offered as a synchronized set or individually. Protec turning device/positioner Syncrolift. Dual column, wireless and manual handheld remote control. Column adjustment electrically movable on both sides. Load capacity: 10,000 kg, 360° rotation. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Rotation speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotational movement: 2 x 2.2 kW. Torque: 18,950 Nm. The machine is also available individually as a mono model (at a lower price). Available with articulated flange (cardan flange) on request. Cjdpjx Tig Hefx Abbsgn

Condition: excellent (used), load capacity: 2,000 kg, Height-adjustable welding positioner, load capacity 2 tons, with infinitely extendable clamping extensions and clamping claws included. Condition: very good. Speed, height, and tilt are infinitely adjustable. Hand and foot remote control. Welding current transmission: 600 amps. Dimensions: Length: 1940 mm, Width: 1200 mm, Table diameter: 1200 mm. Height when tilted: min. 700 mm, max. 1550 mm. Height horizontal: min. 900 mm, max. 1700 mm. Weight: 1750 kg. Cedpsx Tif Aefx Abbsgn

Condition: excellent (used), load capacity: 5,000 kg, Self-supporting, braked rotating device for jig construction, tool making for assembly, welding, painting, etc. with foot-operated remote control, right/left switchable with warning light when working with speed control on request (additional charge approx. €400) Cgsdpfx Abex Tib Dsben Machine is technically in mint condition, almost unused Weight 1200 kg Dimensions: Height to axle center 1000 mm Mounting plate 400 x 400 mm Hole spacing approx. 240 x 240 mm External dimensions of box section 1000 mm x 850 mm More machines of this type in various sizes are in stock. Load capacity up to 5000 kg New machine price over €20,000

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Equipment: foot remote control, 3-axis welding positioner Protec KT 10 000 HV Complete set incl. hand and dual foot remote controls Cgsdex Th Suopfx Abben Digital speed display Hydraulic height adjustment Tilting range 0 to 130° Dimensions: Min. tilted height: 1050 mm Max. tilted height: 2200 mm Min. horizontal height: 1360 mm Clamping plate diameter: 2000 mm Length: 3250 mm, width: 1700 mm Speed from 0.05 to approx. 0.6 rpm (range from 0.05 to 1.2 rpm possible)

Condition: new, Year of construction: 2025, load capacity: 1,500 kg, Perforated Table 1200 x 2400 x 200 mm Tabletop thickness: 20 mm, hole diameter: 28 mm Swivel range: 360° Cgsdpfx Aex Th Sbobbjn Height adjustment: Hydraulic motor, 800 to 1200 mm Rotation speed: 0.5 rpm Motor power: 0.75 kW We offer tables in various sizes and load capacities: Fodpz Aer Uft Deq A Tepb Load capacity 500 kg, dimensions 1000 mm x 1500 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000 mm x 2000 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500 mm x 3000 mm x 200 mm, borehole 28 mm, with manual or automatic height adjustment

Condition: new, Year of construction: 2025, load capacity: 1,000 kg, 3-axis turning and tilting positioner with 1000 kg load capacity, clamping plate diameter 0.65 meters Height adjustment 1000 - 1500 mm Suitable for welding, assembly, processing, etc. Cgjdpfx Aox Th Rwsbben With its stable and robust construction, flexible positioning via three axes including overhead, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces. Optimal positioning of the workpiece improves welding quality and allows higher specified loads in any position. Thanks to the endless rotation of the two rotary axes and additional height adjustment, all workpiece positions (including overhead) are possible. Turntable speed infinitely adjustable from 0.1 to 1.0 rpm. With wireless remote control Rotation range 360° infinite Swivel range 360° infinite Lift: 1000 - 1500 mm Arm outreach radius: 1 meter

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Column adjustment: 2x movable Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Cgedpex Th N Hefx Abbsn Speed: 1 rpm Clamping plate diameter: 500 mm Rotary drive: 0.37 kW Upon request, 2 to 10 tonne load capacities available

Condition: like new (used), load capacity: 1,500 kg, The Siegmund M-Positioner is perfectly suited for welding, assembly, and maintenance work. Positioning is achieved via a manually operated handwheel. Positioner with load capacities up to 1,500 kg. Torque: 900 Nm Handwheel with handle, Ø 315 mm U-angle compatibility: System 28 Maximum U-angle length: 3,000 mm A – Working height: 850 mm B – Column height: 955 mm C – Total height: 1,140 mm D – Base plate width: 600 mm E – Base plate length: 600 mm Price does not include 3-D accessories. Prices for 3-D accessories, heavy cast parts with 28 mm wall thickness, all newly machined special prices: Original angle bracket 28, U-shape, 500 mm x 200 mm x 200 mm (surcharge €500) Cgsdsx Th H Eopfx Abbon or 2,000 mm x 200 mm x 200 mm (surcharge approx. €1,000) or 2,400 mm x 200 mm x 200 mm (surcharge €1,300) or with tabletop, 28 mm grid holes, 2,000 mm x 1,000 mm x 200 mm (surcharge €2,000) Multiple positioners available.

Condition: new, load capacity: 1,000 kg, Equipment: foot remote control, 1000 kg load capacity complete set incl. hand and double foot remote control (available from 600 kg to 10,000 kg) Cgodpfex Th A Hsx Abbsn 3-axis weld positioner with adjustable height with through bore 200 mm table plate diameter 900 mm with T-slots, alternatively with screwed-on solid perforated plate 2000 x 1000 x 200 mm, thickness 20 mm, hole grid 100 mm, diameter 28 mm height (horizontal) min. 0.65 m, max. 1.25 m height (tilted) min. 0.45 m, max. 0.95 m speed from 0.01 - 1.1 rpm tilt up to 135° hand and double foot remote control with speed display very robust price without accessories, accessories available at very competitive surcharge table plate surcharge €1,900 (only in combination with positioner)

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,500 kg, Perforated Table 1200 x 2400 x 200 mm Tabletop thickness: 20 mm, borehole diameter: 28 mm Includes wireless remote control Swivel range: 360° Height adjustment: Hydraulic motor, 800 to 1200 mm Rotation speed: 0.5 rpm Motor power: 0.75 kW We offer tables in various sizes and load capacities: - Load capacity 500 kg, dimensions: 1000 mm x 1500 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 1000 kg, dimensions: 1000 mm x 2000 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 1500 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic Cgjdpfx Abjx Thyrjben - Load capacity 2000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 3000 kg, dimensions: 1200 mm x 2400 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic - Load capacity 5000 kg, dimensions: 1500 mm x 3000 mm x 200 mm, borehole 28 mm, height adjustment manual or automatic

Condition: like new (used), functionality: fully functional, load capacity: 1,500 kg, 3D perforated welding table 2000 x 1000 x 200 mm, 100 mm grid, tabletop thickness 20 mm, bore diameter 28 mm. The tabletop is precision machined and extremely robust, weight approx. 750 kg. The Siegmund M Positioner is ideal for welding, assembly and maintenance work. Positioning is accomplished via a manually operated handwheel. Positioner with load capacity up to 1,500 kg. Torque: 900 Nm. Handwheel with handle Ø 315 mm. U-bracket compatibility: System 28. Maximum length of U-bracket: 3,000 mm. A - Working height: 850 mm, B - Column height: 955 mm, C - Overall height: 1,140 mm, D - Base plate width: 600 mm, E - Base plate length: 600 mm. Price includes the table top with legs, but excludes 3D clamping accessories. Codpfox Thwqex Abbjgn