Rinke + Partner GmbH

Condition: good (used), Year of construction: 1987, Saw head with pneumatic feed cylinder for aluminum and non-ferrous metals Saw blade size 370 mm, 1700 + 3400 rpm Itsdpfxoxptxpj Afisn • Feed cylinder with pneumatic control and limit switch • Double clamping arm (pneumatic)

Condition: used, The machine is built from thick steel, mounted on a sturdy stand, and fully mechanical — no power required. Perfect for workshops, garages, or metal fabrication environments. Iedpfexpmr Nsx Afiotn Details: Manual operation with long lever for easy cutting Stable steel frame and stand included Industrial construction – built to last Suitable for cutting sheet metal, aluminum, or similar materials

Condition: ready for operation (used), Fabrication line for production of metal racks 14 stations: double driven Axle Ø 80 mm station lt;- station: 400 mm adjustable centerdistance axles: min 100mm; max 280mm max feedingwidth: 780 mm max thickness: 3 mm steel Itedpfxsxpkkve Afisn Including: - Colombo excenter Press 100 ton for punching Stroke: 150 mm 16.5 hp Table: 600 x 1000 mm Stroke/min: adjustable from 30 - 90 str/ min - 4 column press on rails acting as flying shear Table 400 x 400 mm - Unloading table Work mode: Roll forming unit Material thickness x width: W 780 mm Max Numbre of sections: 14 stations axle Ø80mm PUNCHING MACHINE: Punching press CUTTING DEVICE: Flying Shear Conveyor: Yes

Year of construction: 2002, condition: ready for operation (used), A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment. Isdsxph Swepfx Afiotn

Condition: ready for operation (used), De uitrusting bestaat uit: 1 - decoilertoren met 4 decoilers (AG 3000 a) capaciteit per decoiler: 3 ton armlengte: 1350 mm maximale snelheid: 25 m/min frequentiegestuurd 2 - spoelselector (MT-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 3 - richtunit (RM-4 1250) min: 150 mm Itjdoxpgdrspfx Afien maximale snelheid: 25 m/min frequentiegestuurd 4 - snij-eenheid (TS 1250 + KST-2) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 5 - Schechtl-schaar voor op maat knippen met Siemens Touch CNC-besturing 1250 x 2 mm

Year of construction: 1983, condition: ready for operation (used), This ZPS AN6-40 A was manufactured in 1983. It features a pick-off spindle, internal grooving slide, and marking device. The machine includes six spindles with a 40 mm spindle bore and operates on a cam-controlled system. Consider the opportunity to buy this ZPS AN6-40 A. Contact us for more information. Itsdpfxoxn Uxzj Afien Application Types Other Machine Tools

Year of construction: 1992, condition: ready for operation (used), This ZPS AN6-40 A was manufactured in 1992. It features a spindle bore of 40 mm and is cam-controlled. Equipped with an internal grooving slide "inclined plane" and a marking device, it is ideal for specialized tasks. Contact us for more information about this machine. Itodpfx Aexn Ux Ijfien Application Types Other Machine Tools

Condition: like new (used), Year of construction: 2012, Description of Ficep RAPID HP35T Ficep RAPID HP 35 T Angle Processing Machine The Ficep HP35T is the predecessor of the current Ficep RAPID series for processing angle steel. The Ficep HP35T is a CNC-controlled system for machining angle profiles. These are robust angle processing centers commonly used in steel fabrication and truss construction. The angle steel is positioned on a transport frame for material feeding. A measuring carriage with a gripper automatically conveys the angle material to the various processing stations of the system, following the machining data entered via the CNC control panel. Once machining is complete, the finished component—drilled, marked, and sawn—is transferred to the outfeed roller conveyor and storage system. Iedexn T Smspfx Afijtn Transport System Reinforced roller conveyor for profiles up to 12 meters in length. A powered measuring carriage on the infeed table transports the material at up to 45 m/min. A rotating support system with cross-transfer racks in the loading area allows for the input of pre-staged profiles into the waiting position. In the discharge area, a driven roller conveyor transports the finished profiles/angles up to a length of 12 meters. Cross-transfer equipment with 5 supports is used for unloading. Drilling Units with Tool Changer To process large angle profiles up to 350 mm with a wall thickness of 40 mm, this machine is equipped with 2 powerful drilling units (one per flange) featuring a spindle drive of 19 kW and infinitely adjustable spindle speeds from 180 - 3500 rpm. These drilling capabilities are ideal for the use of modern carbide drill tools. The drilling tools are held in HSK-A80 holders, and each drilling unit has a tool changer with 3 tool positions for rapid tool changes. MKT38N Marking Unit A marking unit with 38 marking tools allows for flange marking on angle profiles. Characters sized 16x8 mm are hydraulically embossed, enabling part identification after galvanization. Precision Circular Saw The powerful circular saw is designed for 90° cuts. A vertical clamping system secures the material during fast sawing. Material dimensions range from 60 x 60 x 6 mm to 350 x 350 x 40 mm. The 18 kW saw motor with a 560 mm circular saw blade delivers very high cutting performance. Sawing speed is 80 - 180 m/min. Technical Specifications Ficep HP35T: Angle dimensions min. 60x60x6 mm to 350x350x40 mm Circular saw blade diameter 560 mm Saw motor 18 kW Cutting speed 80 - 180 m/min Max. drill diameter 40 mm Drill spindle drive: 19 kW Spindle speed 180 - 3500 rpm Feed rate 80 - 300 mm/min

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Iodjxn R Hhjpfx Afietn Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Year of construction: 1991, condition: ready for operation (used), Available immediately from location: Itodpfx Ajxn R Hbefisn Technoimpex hydraulic guillotine shear Type HS 5 / 2550 Year of manufacture 1991 Cutting length 2550 mm Material thickness 5 mm Digital backgauge 1000 mm Drive 5.5 kW Weight 4 tons Price: EUR 4,500 plus VAT, ex location

Year of construction: 2014, condition: ready for operation (used), This Bystronic TB LK 2.70 2.50 VL 1AS was manufactured in 2014. It includes an edge removal machine, washing machine, inspection and frame placement station, assembly, gas filling, and pressing machine, spacer applicator, and sealing machine. Consider the opportunity to buy this Bystronic TB LK 2.70 2.50 VL 1AS. Contact us for more information. Application Types Other Machine Tools Isdpfsxn Dk Tjx Afietn

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Itedpfexnlwzex Afijn Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Year of construction: 2018, condition: used, Plant for Drawing Oil Preparation in Tube Production Itjdpfx Afsxnindoisn The plant is designed for the optimal preparation of undrawn tubes prior to the subsequent drawing process. In this process, the tubes are evenly treated in drawing oil baths, ensuring homogeneous wetting of the surface. The drawing oil bath provides uniform lubrication, which reduces frictional resistance during the drawing operation, improves surface quality, and increases tool life. The system is designed to ensure a continuous material flow as well as constant bath temperature and quality. It therefore represents a key process step in tube manufacturing and significantly contributes to both the quality and cost-effectiveness of production. Technical Specifications of the Plant Automatic Bridge Crane Type: Matr. 2981 t.6,5 Max. translation speed: 40 m/min class: A6 (FEM 1.001 – ISO) Number of wheels: 4, Ø 315 mm Crane gauge: 13,000 mm Net crane weight: 8,000 kg Motor: Type FC90LFECCL-4, power 1.5 kW, protection degree IP55 Brake: Disc type, DC V400 Gearbox: Type TP 315/90BR, ratio 1/35 Power supply: 400 V – 50 Hz

Year of construction: 2019, operating hours: 1,022 h, condition: ready for operation (used), General Data Measurements width 7600 mm Measurements depth 1500 mm Measurements height 2300 mm Machine weight 2100 kg Control Unit Brand SIEMENS Model SIMATIC HMI Iodsxnd S Ropfx Afistn This MHG SMG 160 was manufactured in 2019. It features a complete system size of 2300x7600x1500mm and weighs 2100kg. Equipped with a SIEMENS Simatic S7 PLC for control, it includes a recovery system and filter cabinet for efficient operation. The blasting cabinet is enhanced with wear protection and LED lighting. Consider the opportunity to buy this MHG SMG 160. Contact us for more information. Application Types Other Machine Tools

Condition: ready for operation (used), Various machines from a production line are available. 1) Band saw Wagner WPB 420. 2) Conventional soldering machine Dalex Technoplex. 3) Broaching press. 4) Guillotine shear Omag. 5) Jaw grinding machine Wagner. 6) Two electric induction heaters. 7) Two thread cutting machines. 8) Two crimping machines. An on-site inspection is possible. A package sale is preferred. Itsdpexnbr Uofx Afisn

Year of construction: 2021, condition: used, Filling volume: 1,400 L, cleaning agent: aqueous cleaner, 2 KÖPPL roller conveyors, type: 2000, year of manufacture: 2021, SIEMENS Simatic HMI control system, dryer, various storage/cleaning racks Itjdpfjxnahbox Afion

Year of construction: 2018, condition: used, Power: 14.8 kW, max. loading dimensions (W x H x D): approx. 48x20x32 cm, with feed roller conveyor, various washing/wire baskets, COMPACT cooling, manual roller conveyor Isdpfxexnagdo Afietn

Year of construction: 2021, condition: excellent (used), For sale: Metal Stamping Press ALP-25J (25T, 2021) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25J Year of manufacture: 2021-04 A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping a wide range of metal components. Technical specifications: Nominal capacity: 25 T Stroke: 100 mm Stroke rate: 100 strokes/min (SPM) Max. die height: 260 mm Height adjustment: 55 mm Ram working area: 560 × 370 mm Bolster area: 250 × 220 mm Country of origin: China Ijdjxm U S Sopfx Afiotn Applications: The ALP-25J press is suitable for: - Stamping, cutting, bending, and forming metal components - Small press operations in tool, metal structure, and automotive part manufacturing - Working with thin and medium-thickness sheet metal If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2017, FICEP GEMINI G32 HPE. Year 2017. MAXIMUM LENGTH 6100mm MINIMUM LENGTH 1250mm MAXIMUM WIDTH 3100mm MINIMUM WIDTH 800mm. DRILLING CAPACITY MAXIMUM HOLE DIAMETER DRILLED / MILLED 40mm (250mm) MINIMUM PLATE THICKNESS 5mm MAXIMUM PLATE THICKNESS THAT CAN BE DRILLED 80mm Iodpfoxmvn Ujx Afiotn MAXIMUM PLATE THICKNESS WITH HPR 260XD 38mm PRODUCTION PIECE 64mm EDGE CUTTING 27mm WITH BEVEL CUT 45 DEGREES PRODUCTION PIECE 45mm WITH BEVEL CUT 45 DEGREES EDGE CUTTING.

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Scribing. Isdoxmvnuopfx Afijtn Short Piece Removal. Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. Iedsxmvm Ropfx Afietn 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1974, Mitsubishi Floor Borer MAF 200/135 Year 1974 Fully Operational X Axis 10,000 mm Itedpfx Ajxmr Ausfien Y Axis 3000 mm Z Axis 600 mm W axis 1,000mm Spindle diameter 200 mm Borer Diameter 135mm Max. spindle speed 810 rpm Spindle motor power 37 kW Table length 1,600 mm Table width 2,100 mm Table Load 15,000 kg Length x width x height (1750.0 × 2667.0 × 300.0) Weight 55,000 kg Immediate Delivery

Condition: used, functionality: unexamined, machine/vehicle number: ABMC-1, input voltage: 380 V, Used Mitsuboshi Diamond Industrial glass breaking machine. Model: ABMC-1 Itsdjxmhqzopfx Afien Manufacturer: Mitsuboshi Diamond Industrial CO., LTD. Voltage: 380V (50Hz)

Year of construction: 2023, operating hours: 109 h, condition: like new (used), functionality: fully functional, High-performance extraction unit for aluminium chips MG 9V Iodpoxmhkbefx Afijtn Centrifugal fan with soundproofed housing, M-class filter, chips fall downwards into a customer-supplied container, max. drop height 1,100 mm Drive: 4.0 kW, 400 V, 50 Hz, max. air volume flow 4,000 m3/h, noise level below 80 dB(A), selector switch for continuous operation or control via the saw. Equipped with 2 connection nozzles D160 mm, dimensions when assembled: 1825 x 1140 x 4675 mm, finish RAL 9016

Condition: used, functionality: fully functional, Year of construction: 2012, machine/vehicle number: 0760801000602, Multiflex tube cutting machine Adige Iodpfx Afjxmg Aioijtn Operational