Factory-Auction

Condition: used, Year of construction: 2005, control Heidenhain x-travel 900 mm y-travel 900 mm z-travel 500 mm a-axis -30/+110 ° c-axis 360 ° table diameter 800 mm table load 1.000 kg spindle tunring speed 18.000 U/min spindle drive 40 kW torque 137/100 Nm tool taper HSK-63 A Njdpsydqrksfx Ad Njkt number of tool places 30 Pos. max. tool diameter 90 mm max. tool length 300 mm max. tool weight 10 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2018, x-travel 1.060 mm y-travel 600 mm z-travel 560 mm Control Heidenhain TNC 640 table dimensions 1.120 x 520 mm spindle tunring speed 12.000 U/min tool taper BBT-40 weight of the machine ca. 6.850 kg auto power on hours ca. 9.848 h spindle hours ca. 2.854 h Nkjdpeydqrdjfx Ad Net In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 500 mm z-travel 500 mm Control Heidenhain iTNC 530 spindle tunring speed 15.000 U/min Nedpfx Adjydqq Ts Nekt max. torque 190 Nm tool taper HSK 63 table surface area 600 x 600 mm table load capacity 350 kg feed 60.000 mm/min auto power on hours ca. 7.975 h NC program ON ca. 1.999 h spindle hours ca. 1.378 h weight of the machine ca. 9.800 kg Overall size ca. 5.000 x 4.500 x 3.110 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - External coolant system with 3 nozzles, 4 bar - Internal coolant system, 20 bar - Scraper belt chip conveyor Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, mileage: 68,500 km, power: 130 kW (176.75 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 6,970 kg, maximum load weight: 520 kg, overall weight: 7,490 kg, tire size: 235/75R17.5, axle configuration: 4x2, wheelbase: 3,620 mm, next inspection (TÜV): 10/2026, brakes: engine braking, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 3, loading space length: 3,800 mm, loading space width: 2,320 mm, loading space height: 700 mm, Equipment: ABS, additional headlights, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling,

Condition: used, Year of construction: 1999, Max. Turning length 6.020 mm centre height 550 mm centre distance 6.000 mm max. swing over bed 1.100 mm max. swing over facing slide 730 mm max. tool weight 6.000 kg Spindle diameter in forward position 178 mm faceplate diameter 1.000 mm spindle bore 128 mm Nksdoydqqyspfx Ad Not tailstock quill taper MT 6 diameter of quill 140 mm max. chucking diameter 500 mm Lathe - cycle-controlled | WEILER - E110 equipped with a PARAT tool system as well as a chip conveyor. A comprehensive tool package, including several steady rests and a heavy-duty boring bar holder, is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition and can be inspected under power at any time in the Swiss factory location. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-110 | E 110

Condition: good (used), Year of construction: 1974, functionality: fully functional, Sharpening machine for circular saw blades up to 650 mm Nodpfxeydqqto Ad Njkt

Condition: reconditioned (used), functionality: fully functional, Location: Glendale Presentation Solutions - UK Availability: In stock Condition: Excellent – fully refurbished by Morgana-trained engineers, including new pull and fold rollers, feed belts, vacuum drum, roller gap sensors and multiple additional replacement components to ensure optimal performance and reliability. Overview Nkodpfeydqp Njx Ad Net The Morgana DigiFold Pro is a high-performance automatic creasing and folding solution designed for digital and litho print environments. Combining precision creasing with automated folding in a single compact system, the DigiFold Pro delivers professional finishing quality while eliminating toner cracking on digitally printed stock. With production speeds of up to 6,000 sheets per hour and the ability to handle media weights of up to 400 gsm, the DigiFold Pro offers an ideal balance of speed, strength and accuracy. Ideal for commercial print, digital production and in-house finishing departments, this refurbished unit provides exceptional reliability, efficiency and versatility. Featuring automated setup, touchscreen control and integrated perforation capability, the DigiFold Pro streamlines finishing workflows and maximises productivity across a wide range of applications including brochures, leaflets, menus and booklets. Key Features Fully automatic creasing and folding system Integrated creasing and folding in a single pass (or creasing only) Touchscreen “Smartscreen” control with automated setup Unlimited job memory for repeat work Handles digital and litho printed stock with ease Built-in perforation capability (up to 4 wheels) High-quality creasing to prevent toner cracking Designed for fast setup and consistent results Specifications Manufacturer Morgana Model DigiFold Pro Condition Refurbished Stock Number 114959 Max sheet size 700mm x 385mm Min sheet size 210mm x 140mm Min paper thickness 110gsm Max paper weight 400gsm Speed 6000 (A4 creased and folded) Job recall Alpha-numeric memory, unlimited jobs Set up Touchscreen. All popular folds pre-set Power supply 240v 50/60hz Weight 190kg Dimensions (L)2020mm (W)680mm (H)1265mm

Condition: excellent (used), functionality: fully functional, Complete Industrial Ammonia Refrigeration System (R717) A complete refrigeration system based on ammonia (R717) refrigerant, designed for industrial applications in food processing plants, cold stores, freezing facilities, and high-performance process installations. The installation includes compressor units, pressure vessels, heat exchangers, circulation pumps, and control panels. Main system components: Ammonia separator vessel Manufacturer: Retech Refrigeration Technologies A/S Type: PSH-0820 Number: 346601 Year of manufacture: 1994 Capacity: 1,092 l Design pressure: -1 / +22 bar Test pressure: 29 bar Refrigerant: R717 Equipment: 2 ammonia pumps Dimensions: 2,700 × 1,300 × 2,400 mm Condenser / Heat exchanger (Shell & Tube Condenser) Manufacturer: Sabroe Refrigeration Type: COSB 411904 Year of manufacture: 1994 Refrigerant: R717 Capacity: 134 / 61.9 l Dimensions: 2,500 × 800 × 2,300 mm Pressure vessel Manufacturer: Tortmans Capacity: 80 l Refrigerant: R717 Dimensions: 1,300 × 500 × 1,400 mm Intermediate cooler Manufacturer: Sabroe Refrigeration Type: DVEA 051411 Serial number: 92578 Year of manufacture: 1994 Max. working pressure: 26 bar Capacity: 340 / 10 l Refrigerant: R717 Dimensions: 1,000 × 800 × 2,300 mm Compressor unit (Sabroe skid): 2 × single-stage reciprocating compressor Sabroe Type: CMO 28 Serial numbers: 99008 / 99007 Year of manufacture: 1994 Capacity: 2 × 190 m³/h Pressure: 20 bar Refrigerant: R717 Sabroe separator Type: GHEA 0520 Serial number: 92419 Year of manufacture: 1994 Capacity: 600 l Alfa Laval heat exchangers: • M10-BWFDT – 37.2 l (year 1993) • M10-BWFGT – 67.4 l (year 1994) Overall skid dimensions: 3,700 × 2,500 × 2,050 mm Additional heat exchanger: Manufacturer: Alfa Laval Type: M10-BWFD Factory number: 30101-12952 Year of manufacture: 1995 Capacity: 104.0 l Design pressure: 25 bar Design temperature: 110°C Dimensions: 1,700 × 500 × 1,000 mm Grundfos circulation pumps (set): LP 80-125/124 – 50 m³/h (several units) LP 100-125/130 – 85 m³/h (2 units) LP 65-125/117 – 42 m³/h UPS 50-120 F – 3 × 400–415 V, 50 Hz Two-stage compressor: Njdpoydqpvefx Ad Nokt Manufacturer: Sabroe Refrigeration Type: TSMC 108 L Serial number: 99112 Year of manufacture: 1994 Refrigerant: R717 Capacity: LP – 276 m³/h Pressure: 18 bar Dimensions: 2,200 × 1,100 × 1,550 mm Control panels (3 units): 2 × panel with Siemens touchscreen – 1,200 × 500 × 2,200 mm Sabroe ammonia plant control cabinet – 2,000 × 500 × 2,300 mm Auxiliary cabinet – 800 × 300 × 800 mm

Condition: used, Year of construction: 2010, turning diameter over bed 316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min Njdpfeydqpiex Ad Njkt voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: used, Year of construction: 1980, faceplate diameter 2000 mm turning diameter over plate 2200 mm travel -x axis 1700 mm travel -z axis 400 (+550) mm faceplate turning speed range -stepless- 0,28- 160 U/min centre height over plate 1140 mm diameter of main spindle 285 mm spindle bore 100 mm Control S 840 D Njdjydqpcopfx Ad Nskt max. workpiece weight 5000 kg max. torque on the faceplate 25000 Nm total power requirement 75 kW weight of the machine ca. 21 t dimensions of the machine ca. 6 x 3,5 x 3 m Machine was reconditioned and modernized in 2015 with Siemens 840 D CNC control. Originaly it was built in 1980.

Condition: used, Year of construction: 1985, round bar steel 40 mm square edge steel 40 mm Njdpjydqn Sjfx Ad Njkt L-beam 120 x 12 mm Punch power 600 kN hole punching press: throat 400 mm hole punching press: max. length of stroke 32 mm hole punching press: capacity (dia. x thick.) 30 x15 mm hole punching press: capacity (dia. x thick.) 20 x 20 mm notching: l + T material 80 x 10 mm no. of strokes 40 / 46 Hub/min shear: flat material 150 x 15 mm shear: length of knifes 275 mm total power requirement 3 kW weight of the machine ca. 2,9 t dimensions of machine L x W x H 2,18 x 0,83 x 2,15 m Accessories: tool cabinet with various punches and dies, length stop

Condition: good (used), axle configuration: 3 axles, first registration: 08/2011, suspension: air, Year of construction: 2011, Equipment: ABS, = More options and accessories = - EBS - Lift axle - Air suspension = More information = Suspension: Air suspension Rear axle 1: Lift axle Rear axle 2: Steered Curb weight: 7,100 kg Payload: 31,900 kg Nksdpoydqn Esfx Ad Not GVW: 39,000 kg Technical condition: good Visual condition: good Contact Emad Al Shogran for more information. Vehicle number: Trailer.: 12 Fliegl / BPW / Steering + lift axle / Extendable .: WFDFLT333501001822 German vehicle TÜV: HU: 05.2024 - SP: 11.2023 F.1 Technically permissible total weight in kg: 39,000 G Curb weight:. 7100 Kg Steering + lifting axle PBW axle Extendable = Company information = Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: used, Year of construction: 1974, length 450 mm width 250 mm height 1.250 mm accuracy +/- 1 ° distance between tapping holes H: 130 mm distance between tapping holes V: 150 mm Nodpjydqnxsfx Ad Nskt distance between tapping holes H: 70 mm distance between tapping holes V: 200 mm JOHANN FISCHER - Measuring Angle

Condition: used, Year of construction: 2009, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 / 74 Nm tool taper HSK A 63 table surface area 630 x 500 mm max. table load 200 kg Swivel range -110 / +5 ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. tool taper HSK A 63 max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm rapid traverse 24 m/min Feed force 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 3,5 x 3,5 x 2,8 m CNC - Milling Machine Universal DMG DECKEL MAHO - DMU 50 New Design - 5 Axis (3+2) - swivable rotary table Nksdpsydqnrofx Ad Nst - only 1.943 Spindle hours

Condition: used, functionality: fully functional, mileage: 3,617 km, gearing type: mechanical, fuel type: diesel, color: yellow, Year of construction: 1996, JCB 3CX BACKHOE LOADER – YEAR 1996 – 3617 HOURS – 55 KW – 75 HP – 2990 CC – LENGTH 6190 – WIDTH 2369 – PERKINS ENGINE Nedpfx Aoydqnljd Nskt

Condition: used, Year of construction: 2003, travel -x axis 180 mm Nodpjydqnfsfx Ad Nekt travel -z axis 370 mm Total weight, approx. 65 kg dimensions of the machine ca. 2,0 x 1,2 x 2,0 m Tool Presetter DMG Microset - ECO 1

Condition: used, Year of construction: 2003, travel -x axis 300 mm travel -z axis 400 mm Njdpjydqm Usfx Ad Nokt tool taper VDI 40 / VDI 50 Total weight, approx. 141 kg dimensions of the machine ca. 1,2 x 0,8 x 0,85 m Tool Presetter ULMER - Präzisa 400

Condition: like new (used), Year of construction: 2017, functionality: fully functional, total length: 1,120 mm, total height: 1,490 mm, total width: 660 mm, type of input current: AC, product height (max.): 120 mm, product height (min.): 1 mm, product length (min.): 50 mm, product length (max.): 430 mm, product width (max.): 290 mm, product width (min.): 50 mm, input voltage: 230 V, input current: 13 A, overall weight: 100 kg, power: 3 kW (4.08 HP), film width: 400 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), table width: 320 mm, table length: 460 mm, Equipment: documentation/manual, 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine – UNUSED – As New Used 2017 Robert Seal Corp SC346 heat shrink wrapping machine for sale. Never used from new, single phase, compact shrink wrapper, excellent condition. Machine Manufacturer: Robert Seal Corp. Model: SC346 Machine Type: Heat Shrink Wrapping Machine Year: 2017 Condition: Never used from new. High-Quality Heat Shrink Packaging Machine for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 2017 Robert Seal Corp SC346 Heat Shrink Wrapping Machine, supplied new and never used from new. The machine is in very good / as-new condition, making it an excellent opportunity to acquire a modern shrink wrapping system at a fraction of new cost. Designed for efficient, professional heat-shrink packaging, this compact and reliable machine is ideal for manufacturing, food, print, distribution, e-commerce, and general packaging applications. Key Features & Benefits Robert Seal Corp SC346 Heat Shrink Wrapper Manufactured 2017 Nodpfoydqm Iox Ad Nskt Never used – unused stock Compact footprint Simple, reliable operation Single-phase power – easy installation Ideal for small to medium production runs CE marked Technical Specifications – Robert Seal Corp SC346 General Machine type: Heat Shrink Wrapping Machine Model: SC346 Year of manufacture: 2017 Condition: Very good – never used Supplier: Robert Seal Corp CE compliant Power & Electrical Power supply: 230V – 1 Phase Frequency: 50 Hz Installed power: 3.0 kW Current: 13.6 A Dimensions & Weight Overall machine dimensions: Length: 1120 mm Width: 660 mm Height: 550 mm Machine weight (without stand): 69 kg Working table height (on stand): 940 mm Sealing & Packaging Capacity Sealing area: 320 × 460 mm Minimum package size (A × B × C): 50 × 50 × 1 mm Maximum package size (A × B × C): 430 × 290 × 120 mm Note: B + C must not exceed 350 mm Film type: Centre-fold shrink film Maximum film thickness: 60 gauge Typical film dimensions (D-F-E): 400 × 250 × 75 mm Operating Characteristics Acoustic noise level: 71.8 dB Compact, energy-efficient heat tunnel Suitable for continuous or intermittent operation Ideal Applications Product shrink wrapping Food & beverage packaging Printed materials & cartons E-commerce fulfilment Contract packing operations General manufacturing & distribution Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used & unused machinery Machines honestly described and inspected Nationwide & export delivery available Competitive pricing

Condition: used, This listing is for the Tecan Infinate 200 Pro Microplate Reader Nkjdoydqmzopfx Ad Not The unit is in full working condition and is ready for immediate use The Tecan Infinite 200 PRO is a multimode microplate reader — a laboratory instrument used to measure the intensity of light in biological and chemical assays placed in microplates (usually with 96, 384, or more wells). It’s widely used in life sciences research, clinical labs and drug discovery for quantitative analysis of samples Typical Uses Laboratories use this type of plate reader to: • Quantify DNA/RNA or protein concentrations • Run immunoassays like ELISA • Perform drug screening assays • Read fluorescence or luminescence signals from reporter gene assays • Monitor cell viability or enzyme activity

Condition: used, Year of construction: 2016, clamping force: 400 kN, displacement volume: 1,078 cm³, injection pressure: 2,000 bar, overall weight: 24,000 kg, load hours: 33,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Nsdpoydqmnofx Ad Njkt

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, VOLLMER semi-automatic machine for carbide-tipped saw blades Njdeydqmhspfx Ad Nskt

Condition: used, Year of construction: 1962, Strip planer knives Z = 4, planing width 500 mm Stock location: Nattheim Nodpfxeydql Re Ad Njkt

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Nkodpfxoydql Ds Ad Not

Condition: good (used), Year of construction: 1993, functionality: fully functional, Hollow tooth sharpening machine, manufacturer AKE Nkodjydqlwspfx Ad Nst

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h • At 50% load: 167 Nm³/h Manufacturer: MTU – Centrica Business Solutions Srl Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Condition: New – 0 hours Enclosure: Enclosed container Capacity: 1,178 kW Cooling System Flow rate: 56.4 L/sec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Weight: 13,700 kg Nkodjydqlqjpfx Ad Njt Evaporative Cooling Towers: No. 2 Condition: New – 0 hours