Pphu Traco

Condition: used, Year of construction: 1989, pressing area: 2500mm x 1100mm opening: 400mm heating: elektrisch plate surface: ALU - Gold eloxiert Emergency stop switch: yes pressure: 65t number of cylinder: 4 electricity: 22A machine length: 3500 mm machine width: 1300mm weight: 3000kg Kwodpfx Aeyl Tinogzju

Condition: excellent (used), The press frame and the press table are made from a heavy, robust, welded steel construction. All support or pressing surfaces are machined. The hydraulic cylinder features hardened and ground piston rods made from high-quality steel. Precise, backlash-free piston guidance is achieved through high-pressure seals and wipers. The hydraulic pump operates in two stages with an automatic changeover valve. Pressing pressure can be infinitely adjusted using a pressure switch. A parallel rack compensation system is included. Central control panel. Opening and closing of the press is operated via push buttons. Temperature control system. Main switch. Electrically heated aluminum plates. Technical data: Pressing area: 2200 x 1100 mm 4 press cylinders Press cylinder diameter: 60 mm 1 level = 2 heating plates Clear level height: approx. 300 mm Total pressing force: approx. 50 t Operating voltage: 3 x 400 V + N, 50 Hz Kwsdpfxeylat To Agzou Total connected load: approx. 12.0 kW Required space (L x W x H): 2600 x 1300 x 1750 mm Weight: 3000 kg

Condition: new, Year of construction: 2025, Plate dimensions 3000x1350 mm Daylight opening 400 mm Number of daylights 1 St. Heating 31,5 kW Specific pressure 2,5-5,0 kg/cm² Total pressure 90 t Kwedpfx Ageyk H Stszsu Motor output 1,5 kW Dimensions (L/W/H) 3480x1500x2000 mm weight of the machine ca. 5000 kg

Condition: good (used), SIMIPIANTI COLD PRESS WITH MOVABLE UPPER PLATENS LOWER PLATEN: DIMENSIONS 1800x1215mm With rollers in the platen for panel conveying Kodpfsyk Hzujx Agzjwu UPPER PLATEN IN 2 SECTIONS: 1800x600mm OPENING BETWEEN THE 2 PLATENS: 650mm

Condition: excellent (used), Catalogue number 7740 Kwjdpfx Agjyk E Nqezeu TECHNICAL SPECIFICATIONS - heating plate dimensions: 3000x1350 mm - number of loads: 1 - electrically heated shelf - clearance: 340 mm - number of cylinders: 6 - cylinder diameter: 80 mm - total power: 20.7 kW - pump motor: 1.1 kW - dimensions (L/W/H): 3570x1600x2200 mm - weight: approx. 3500 kg ADVANTAGES – made in Germany – electrically heated shelves – unpainted – in impeccable condition – used press Net price: 48,900 PLN Net price: 11,650 EUR at an exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Condition: good (used), Year of construction: 2007, GRIGGIO Model TYP NPC/A 30/19 AF-BO, S/N B3720207. Through-feed press for bonding natural veneer, laminate, etc. Working width: 1830 mm. Max length: 3010 mm. Price includes Osama S4 R/P-2000 glue rollers. Kjdpfx Agjyk Dnfezswu

Condition: used, Year of construction: 1990, total width: 1,500 mm, total length: 3,150 mm, total height: 2,100 mm, overall weight: 5,000 kg, pressing force: 135 t, opening width: 400 mm, operating pressure: 340 bar, power: 22 kW (29.91 HP), cylinder diameter: 90 mm, transport width: 1,500 mm, space requirement width: 1,500 mm, space requirement length: 3,150 mm, transport height: 2,100 mm, transport length: 3,150 mm, space requirement height: 2,100 mm, pressure: 340 bar, working width: 1,350 mm, empty load weight: 5,000 kg, plate width: 1,350 mm, table width: 1,350 mm, table length: 2,550 mm, No. 04516 Veneer press Ott ST 2513/135 Used, year of construction 1990 Aluminium heating plates with protective foil 2550 x 1350 mm LW Total pressure 135 tons Specific pressure 4.4 - 6.0 kg/cm2 6 hydraulic cylinders with diameter 90 mm Maximum operating pressure 340 bar Heating plates electrically heated 2x emergency stop safety line all around Opening width 400 mm, infinitely adjustable 4 heavy longitudinal beams in the press table ensure enormous stability Pull-out material support on the left front side Button control for close - open - stop Total electrical connection approx. 22 kW Kjdpfxsykt H Rs Agzewu Transport dimensions approx. 3150 x 1500 x 2100 mm LWH Weight approx. 5000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Technical data: Number of pistons: 8 Piston diameter: 80 mm Own heating system: 27 kW Temperature up to 120°C Connection to central heating possible Shelf dimensions: 1300x3500 mm Table working height: 1040 mm Clearance: 400 mm Hydraulic pressing force: power/max 160 tons Ksdpfx Aeykalysgzjwu Automatic loading and unloading on roller-belt table (1680x3500 mm) Belt loading speed: 15 m/min Safety switch Pump motor power: 3 kW Loading motors power: 1 kW Total power: 31 kW Power supply: 380V Weight: ~5500 kg Overall dimensions: Length: 4650 mm Width: 3400 mm (press 1615 mm / table 1680 mm) Height: 2400 mm

Condition: excellent (used), Shelf press for veneering Cooper 3000×1300, water-heated Kedsyi Sfcopfx Agzewu

Condition: used, Year of construction: 1984, Plate dimensions 3000 x 1350 mm Daylight opening 400 mm Number of daylights 1 St. Total pressure 3,5 - 5,5 to Dimensions (L/W/H) 3530 x 1520 mm weight of the machine ca. 6500 kg Number of pressing cylinders 6 Stk. Ott Veneer Press Type Stabil-3013 ----- Technical Manufacturer's Description: -Pressing area: 2,500 × 1,350 mm -6 cylinders -Replaceable aluminum plates -Protective film Kwodpfeyif S Tox Agzou -Plate size: 3,000 x 1,350 mm -Total pressing force: 135 t, 3.5 - 5.5 kg/cm² -Operating pressure, max. 340 bar -Pressure cylinders: 6 x 90 mm diameter -Opening width: 400 mm -Weight with 2 plates: approx. 6,300 kg -Overall length: 3,530 mm -Overall width: 1,520 mm -Overall height with 2 plates: 2,000 mm -Motor power rating: 2.2 kW -Power rating per electric heating plate: 11.2 kW -Consumption per plate: Approx. 4.5 kW/h -Heating time 20 - 100 degrees Celsius: approx. 20 min -Consumption per hot water heating plate: approx. 9000 W/h ----- Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT.

Condition: used, OTT 300K100 Shelf Press Shelf length: 255 cm Width: 135 cm Clearance between shelves: 350 mm Shelves are in nice gold color but have a single dent of approximately 3 cm diameter Electric heating Piston diameter: 100 mm, 4 pistons Weight approximately 3.2 t Machine in stock, inspection possible Kwjdpfx Asyh H Uyegzeu

Condition: excellent (used), Shelf press for veneering Manni 2500×1300 Shelf length: 2500 mm Shelf width: 1300 mm Press with 4 cylinders Shelves heated with water from the central heating system Kedpfsyhnvnex Agzowu

Condition: excellent (used), Shelf width 136 cm Shelf length 260 cm 18 kW Kodeygxbljpfx Agzswu

Condition: ready for operation (used), electrically heated Press dimensions 2,200 x 1,100 mm Kjdpoygg Imsfx Agzswu 4 press cylinders, diameter 80 mm Temperature of upper and lower plate separately adjustable

Condition: used, Platters 300cm/125cm divisible into 3 pieces Kwjdpfoyf Enijx Agzeu 380V Cold press

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: -, ORMA NPC/DIGIT 6/95. Press area of 3000x1300 mm, six cylinders.Press opening stroke 650 mm. 3 loads. Pressure 90 ton. 18 kW electro-heater for thermo-oil heating up to 120°C. Parallelism control by sensor. CE-standard. Transport throughout Europe is available at a good price. Kedsyf Azgspfx Agzowu

Condition: used, total width: 1,300 mm, total length: 2,600 mm, total height: 2,000 mm, overall weight: 2,800 kg, pressing force: 65 t, opening width: 300 mm, cylinder diameter: 80 mm, transport width: 1,300 mm, space requirement width: 1,300 mm, space requirement length: 2,600 mm, transport height: 2,000 mm, transport length: 2,600 mm, space requirement height: 2,000 mm, empty load weight: 2,800 kg, plate width: 1,100 mm, table width: 1,100 mm, table length: 2,200 mm, No. 04486 Veneer press Ott JU 60 Used Heating plates 2200 x 1100 mm LW Plates gold anodized, in very good condition Electric heating 2x 6 kW 4 hydraulic cylinders, diameter 80 mm each Total pressing pressure 65 tons Specific pressing pressure at full capacity 2.7 kg/cm2 Opening width 300 mm Button control for close - open - stop Circumferential emergency stop safety pull cord Transport dimensions approx. 2600 x 1300 x 2000 mm LWH Weight approx. 2800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Kwjdpfxeyfw D As Agzju Terms of delivery: ex warehouse

Condition: good (used), Year of construction: 2000, total width: 4,000 mm, total length: 4,000 mm, total height: 3,200 mm, overall weight: 43,000 kg, type of input current: three-phase, temperature: 160 °C, pressing force: 500 t, continuous press with mylar belt dimensions: 2700 x 3200 mm Kwedpfxsycxvuj Agzou

Condition: good (used), Code: 0283 Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Kwodpfxjyazdie Agzeu Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: used, Shelf Press Tiger TM/6 Shelf length: 300 cm Width: 130 cm Clearance between shelves: 650 mm Nice, straight aluminium shelves Kjdpex S Nbbefx Agzjwu Water heating system; the machine has its own heaters and circulation Option to connect to external central heating Piston diameter: 85 mm, 6 pistons Emergency stop switch (pull cord) Pressure: 5 kg/cm2 Weight: approx. 6.5 t

Condition: excellent (used), Year of construction: 2002, plate length 3500mm Ksdpfsx Sqlzox Agzowu plate width 1300mm solid steel plates oil heating with included heater 8 hydraulic pistons pistons diameter 85mm total pressure 160 tons safety line switch year 2002

Condition: used, Year of construction: 2014, functionality: fully functional, A complete production line for manufacturing decorative panels, render carrier boards, and facade profiles is being sold due to retirement. Consisting of: - Mixing plant (Respecta) incl. control cabinet and conveyor belt for 3 different types of raw materials Kwedpfx Asx R Dpwsgzou - Continuous press with conveyor belt and control cabinet incl. heating unit - CNC machine - Panel saw - Panel cutting machine - 3 spindle moulders and one wide-belt moulder - Including extraction system for the existing machines - Documentation with CE conformity declarations for the machines available Dismantling and collection must be arranged by the buyer. Pickup location: A-8265 Kroisbach an der Feistritz Training, recipes (panel production can be started immediately), and know-how for panel production can be negotiated at an additional cost. Input VAT deductible within Austria.

Condition: used, functionality: fully functional, machine/vehicle number: 17, opening width: 900 mm, working width: 2,000 mm, SECOND-HAND PRESS PELLEGRINI - Platens dim. mm. 2000X800 - Opening mm. 900 - S/N 17 Kwsdsx Rrgqepfx Agzsu

Condition: used, Year of construction: 2003, functionality: fully functional, overall weight: 3,500 kg, pressing force: 60 t, input frequency: 50 Hz, operating temperature: 100 °C, input voltage: 380 V, cylinder diameter: 65 mm, SECOND-HAND UNIVERSAL HOT PRESS FOR VENEER AND SOLID WOOD GLUED PANELS WITH SIDE PRESSURE CYLINDERS ORMA MOD. NPC/L Vertical thrust - Total thrust – 60 tons - Specific pressure – 2 kg/cm2 - Plate dimensions – 2500x1300 mm - Cylinders – 4 - Cylinder diameter – 70 mm - Electric boiler thermal power – 18 kW Kwjdpex Rrb Isfx Agzou - Voltage – 400/3/50 Hz Horizontal thrust - Total thrust – 25 tons - Cylinders – 5 - Cylinder diameter - ø 65/40 mm - Operating temperature - 100°C - Weight - 3.5 tons - Power - 21 kW 29 A - Voltage - 380/3/50 Hz - Dimensions - 3100 x 1650 x 1800 mm - CE standard - Year 2003

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 9,000 kg, pressing force: 240 t, operating temperature: 130 °C, cylinder diameter: 85 mm, SECOND-HAND ORMA NPC/L DIGIT30/13AF-BO (2007) POWERFUL UNIVERSAL PRESS FOR VENEERING, THREE-LAYER PANEL PRODUCTION AND WITH SIDE PRESSURE BLADES FOR WOOD PANEL PRODUCTION Vertical thrust: - Total thrust - 240 tons - Specific pressure - 6.15 kg/cm2 - Plate dimensions - 3000 x 1300 mm - Cylinders - 12 pcs. - Cylinder diameter – 85 mm Kwsdpfxex Rraqo Agzsu - Hydraulic unit – 4 kW - Electric boiler thermal power – 18 kW Horizontal thrust: - Total thrust – 30 tons - Cylinders – 6 pcs. - Cylinder diameter – ø 65/40 mm - Operating temperature – 130°C - Weight – 9 tons - Power – 33.6 kW 54 A - Voltage – 400/3/50 Hz - Dimensions – 3600x1650x1800 - CE standard - Year 2007