A+B Werkzeuge Maschinen Handels GmbH

Condition: used, Year of construction: 2002, sheet width 3230 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.75 mm no. of strokes 34 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control POS 100 air pressure 6.0 bar engine output 6.8 kW weight of the machine ca. 3510 kg range L-W-H 4070 x 2070 x 1400 mm Current new price including accessories approx. 70.000 Euro From a maintenance workshop Very good condition (!!) Gjlhowr Er Aeccqnoiu Special price upon request Features: - Robust / motorized swing cut guillotine shear - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * With SCHRÖDER NC POS 100 control unit * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Coarse adjustment via pushbuttons * Limit value protection with limit switches - "Duo-Cut" drive with two dynamic, powerful gear motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel blade - 1x side stop with T-slot and digital mm scale - 2x extended sheet support arms - Selector switch for single and Continuous stroke - 1x freely movable foot switch - Rear safety device (side guards) - Original operating instructions Optional accessories included: - Pneumatically controlled sheet support device for thin sheet blanks * Sheet removal / sheet slide to the front (operator side)

Condition: used, Year of construction: 1998, sheet width 2520 mm plate thickness 1.50 mm ST plate thickness 2.50 mm ALU thickness at "Niro-steel" 0.75 mm bending angle max. 180 ° bending speed 5.5 sec / Hub dayligth 215 mm upper clamping bar adjustment 120 mm Adjustment folding beam 25.0 mm engine output 1.12 kW weight 1620 kg range L-W-H 2760 x 1050 x 1060 mm Equipment: - Electric-driven folding machine - Bending angle adjustment via electric potentiometer - 1x used split set of goat's foot tools (H = 80.0 mm) Gslswrmanshccqnjiu - 2x used upper tool rails (pointed and radius rails) - 2x used bending rails (10.0 mm + 25.0 mm) - Manual lower beam adjustment - 1x freely movable foot control (3 positions) - Manual backgauge with mm scale * Maximum travel 500 mm * Adjustment from the rear with handwheel - 2x emergency stop buttons at the front - Operating instructions (PDF)

Condition: used, Year of construction: 1995, pressure 100 t chamfer lenght 2550 mm distance between columns 2050 mm column arm 350 mm stroke 315 mm dayligth 585 / 435 mm table height 925 mm ajustment speed 110 mm/sec working feed 10.0 mm/sec return speed 140 mm/sec back stop - adjustable 500 mm traversing speed 180 mm/sec control DNC 880 S oil volume 100 ltr. total power requirement 7.5 kW weight 4600 kg range L-W-H 2700 x 1450 x 2400 mm Machine from a maintenance workshop "Coffee roastery" from Switzerland Well-maintained / good condition (!!) New price in 1995 approx. 90.000 Euro - Inspected condition - Machine video - ?v=b79DLDasiIw ----- BEYELER CNC electro-hydraulic press brake with: * Increased installation height * Increased cylinder stroke * Increased throat * Increased feed and retract speed ----- Equipment: - CNC electro-hydraulic press brake - CNC CYBELEC "DNC 880S" control unit * Numerical control - specially designed for sheet metal processing * High-resolution screen * Clear, easy-to-read menus in the operator's language * Tools and product library * Bending sequence displayed graphically in 2D * Possible collisions are displayed * Pivoting control panel, right Front - CNC-controlled axes: Y1 + Y2 + X + R axes + CNC crowning - CNC electro-motorized backgauge (X axis) * with 4 manually adjustable stop fingers - CNC electro-motorized height adjustment of the backgauge (R axis) * Travel range 130 mm * Travel speed 50 mm/sec - CNC BEYELER under-table crowning - BEYELER/BYSTRONIC electro-hydraulic upper tool clamping * Tool system "R" * incl. hydraulic unit including electric motor Gislhccewqg Iveqneu - BEYELER/BYSTRONIC manual lower tool clamping - Various bending/insertion tools - Electro-motorized oil cooler - 2 front - stable material/sheet support arms - 1 freely movable two-hand control - 1 freely movable foot switch - Side guard (protective grille) - Rear guard (Protective grille) - Original machine operating instructions

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V Gjlhccqjwpw Epsnsiu total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8721 oil volume 240 l voltage 400 V total power requirement 17.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm Good / well-maintained condition With special accessories (!!) Equipment: - NC electro-hydraulic guillotine shear "Sliding Guided" - Heavy-duty / stable welded construction (machine body) - NC ELGO digital control unit "P8721" Gjlhccswpw Eioqnoiu - NC electro-motorized backgauge on recirculating ball screws - Electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side stop, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball transfer units in the work table including recessed grips - Front finger guard - foldable at the front - 1x freely movable foot switch - 2x emergency stop buttons at the front - Operating instructions (PDF) Special accessories included: - Pneumatic sheet holding device for thin sheet metal blanks * Movable - on casters - 1x used Set of scissor blades

Condition: used, Year of construction: 1997, sheet width 3020 mm plate thickness 4.0 mm Opening width / upper beam 350 mm Adjustment folding beam 100 mm adjustment of lower beam 80.0 mm bending angle max. 130 ° work height max. 900 mm Control SIEMENS OP 7 voltage 400 V total power requirement 9.5 kW weight 5400 kg range L-W-H 4300 x 2400 x 1780 mm Furnishing: - SIEMENS - PLC control model OP 7 * Bending process as a controlled, fully automatic, or semi-automatic workflow can be selected * Bending angle adjustment electronically preselectable 0-135 ° - electr. / controlled backgauge X = 1000 mm * with large sheet metal support surface - heavy welded construction - all drives both. via worm gear - Motorized adjustment of the bending beam - large adjustment range of the cheeks - hydraulic upper tool clamping - Insert / bending tools - Operation manual * Special accessories included: - separate split goat foot splint H 170 mm * Machine video: Gelhccewplnrsqnoiu - ?v=C3rwhUDtOKw

Condition: used, Year of construction: 1995, pressure 60.0 t chamfer lenght 2050 mm distance between columns 1550 mm column arm 255 mm stroke 165 mm dayligth 360 mm table height 890 mm working feed 7.0 mm/sec return speed 85.0 mm/sec back stop - adjustable max. 500 mm Control EURO IV oil volume 100 ltr. total power requirement 5.5 kW weight 4600 kg range L-W-H 2700 x 1450 x 2400 mm Machine from a workshop for the disabled very good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=jileVh2DvNA Equipment: - CNC electro-hydraulic press brake - CNC CYBELEC EURO IV control unit * High-resolution screen * Clear, easy-to-read menus in the operator's language * Tool & product library * Front right control panel, pivoting - CNC-controlled axes: Y1 + Y2 + X + R axes - CNC electro-motorized backgauge (X axis) * Max. travel 500 mm * Travel speed 180 mm/sec. - CNC electro-motorized height adjustment (R axis) * Max. travel 130 mm * Travel speed 50 mm/sec. - 3 manually adjustable stop fingers - BEYELER electro-hydraulic top tool clamping * Includes adapter from BEYELER to AMADA tools Gelhswplnleccqnjiu * 1 bending tool set - Manual table crowning - including analog value scale * Adjustment via hand crank * Includes adapter rail for BEYELER tools - 2 front material/sheet support arms - 1 freely movable two-hand control unit - 1 freely movable foot switch - Side guards (2 hinged doors) - Rear guards (1 hinged door) - Operating instructions for machine and control system

Condition: used, Year of construction: 1998, sheet width 3050 mm plate thickness 4.0 mm ST thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° down holder 21 Stück oil volume 160 Liter strokes per minute 18 - 31 Control ELGO 0 max. 300 bar voltage 400 V Gislhccqewm Rf Denju main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm From a maintenance workshop Good condition (!!) Equipment: - Electro-hydraulic swing cut sheet metal shear - Machine frame = all-steel welded construction - ELGO NC control, control panel at the front left * For positioning the electro-motorized backgauge * Target/actual position value input possible * Adjustment by three-phase motor via toothed belt - Support table with ball transfer rollers * Grip recesses are located between the table plates - Front finger guard - Hydraulically operated sheet metal hold-down clamps - 1x freely movable foot switch - Emergency stop button at the front - 1x movable scrap diverter (at the rear) - Operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks - 1x EHT extra-long side stop with mm scale & support foot - 1x EHT front - movable support arm

Condition: used, Year of construction: 2007, sheet width 3100 mm plate thickness 13.0 mm ST pre-bending 10.0 mm ST diameter of upper rolls 300 mm side roll diameter 270 mm bending speed 4.5 m/min voltage 415 V total power requirement 11.0 kW weight 8200 kg range L-W-H 5090 x 1620 x 1630 mm Current new price including accessories approx. 100.000 Euro Special price upon request Equipment: - Robust electro-hydraulic 3-roll bending machine - Induction-hardened rolls - Robust machine body + stable welded construction - SIEMENS ELGO digital position indicator * Position indicator for the two side rolls - Freely movable control panel - Curved side roll feed - Electro-hydraulic conical bending device - Electro-hydraulic safety chuck - Pressure gauge/pressure indicator for the rolls - Operating instructions (PDF) * Special equipment included: - 2x AK BEND SIDE supports (lateral sheet metal support system) - Bending rolls with profile roll extension * Includes various profile rolls Gielowmf Sxshccqnsu

Condition: used, Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm very well-maintained condition Machine with only approx. 7.700 operating hours (!!) Furnishing: - CNC control OPERATEUR for axes X,Y1+Y2,R1+R2,Z1+Z2 - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop fingers (R-axis) - CNC-controlled adjustment of the stop fingers left-right (Z-axis) - Hand control device on the foot switch for manual movement of the axes - freely movable two-hand control & foot switch - Tool top wedge crowning - type AMADA - various application tools - CE marking - 2x EMERGENCY stop buttons at the front Gijlhccjwmf Sfoqneu - original documents such as operating instructions * Machine link: ?machineno=1008-9308346 * Machinevideo : ?v=G4oZ0TFcD9c&feature=

Condition: new, working area L-W-H 1000 x 900 x 900 mm range L-W-H 1300 x 1750 x 2200 mm Geljwmf R Uohccqneiu weight 350 kg Description: - Compact and elegant design - Easiest operation - low material consumption - optimal use of space - highly effective dedusting - efficient way of working - Environmentally friendly working without dust nuisance - controllable material consumption - Any conventional, dry abrasive is suitable as a blasting material * such as B. corundum, steel sand, glass grain, glass beads, ceramic beads

Condition: used, Year of construction: 1975, turning length 1500 mm turning diameter over bed 610 mm turning diameter over slide rest 375 mm number of spindle speeds 9.0 - 1800 U/min. spindle bore 82.0 mm tailstock quill taper MT MK 6 spindle taper DIN 55022 bed width 500 mm Cross slide displacement 455 mm Upper support displacement path 200 mm voltage 380 V total power requirement 25.0 kW weight of the machine ca. 4250 kg range L-W-H 4250 x 1400 x 1600 mm Machine from a maintenance workshop New price in 1975 approx. 40.000 Euro Lathe with precision-ground and induction-hardened bed. Ideal for use in workshops/industrial plants, for example. Features: - Robust, conventional Lathe with drawbar - 1x three-jaw chuck with spare jaws - HEIDENHAIN digital readout - Special control panel Gislhcewlvhzecqneu * on swivel arm on the lock case - MULTIFIX tool holder with numerous inserts - Machine bed without offset - Hardened and ground guideways - Hardened and ground gears in the headstock - Electromagnetic main spindle brake - 1x robust, adjustable tailstock * including live center - Chip guard on the rear panel - 1x separate motor cooler - 1x separate control cabinet - Coolant system - Original machine documentation

Condition: used, Year of construction: 2018, punching pressure 60.0 t punch diameter 28 in 15 mm punch diameter 38 in 11 mm adjustment of stroke 0 - 60.0 mm round bar steel 40.0 mm L-beam 120 x 12.0 mm square edge steel 35.0 mm shear: flat material 200 x 20 / 300 x 15 mm blade length 317 mm strokes per minute max. 25 work height max. 900 / 1130 mm oil volume 75.0 l voltage 400 V Giolhccjwli E Tsqnou total power requirement 5.5 kW weight 1440 kg dimensions 1520 x 950 x 1780 mm From a maintenance workshop New price for basic machine including accessories ~ €17.000 Special price upon request Equipment: - Electro-hydraulic profile steel shear - Punching station, flat steel shear, angle/profile steel shear, . notching station * Including special equipment: bending station - Heavy-duty and stable welded construction - Continuously adjustable stroke - Very compact design - Support table at notching and punching station - Side support/storage surfaces - 1x adjustable electrical contact length stop - 1x freely movable foot switch - Emergency stop button - Operating instructions (PDF)

Condition: used, Year of construction: 2008, pressure 56.0 t Gjlhccqowk N Nisnoiu chamfer lenght 1400 mm distance between columns 1300 mm throat 220 mm stroke 200 mm dayligth 485 mm work speed 8.0 - 10.0 m/min return speed 35.0 mm/sec Control CNC Boschert back stop - adjustable 0 - 370 mm work height max. 915 mm Cylinders : 2 Stück voltage 3x 400 V connected load 8.0 kVA weight 3700 kg range L-W-H 2320 x 1280 x 2030 mm very good / well-maintained condition (!!) with lots of bending tools Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control)

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore diameter 28 mm - Surface holes with a 100x100 mm grid - Rounded corners, edges, and holes - Side panel height 200 mm - Side panel hole spacing 50 mm - Surface scale included - Construction reinforced with ribs - Grid lines enable precise setups The welding tables are equipped with a scale as standard. Gielswkvl Rohccqnou Plasma nitrided finish: - Protection against rust, scratches, and weld spatter adhesion - More corrosion-resistant / higher load capacity Features: - 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm - Plasma nitrided finish (750) with scale - Includes 4x base feet

Condition: used, Year of construction: 2010, sheet width 4100 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 350 mm side roll diameter ~ 300 mm bending speed ca. 2.0 + 5.0 m/min oil volume 125 Liter voltage 380 V total power requirement 11.0 kW weight 9150 kg range L-W-H 5600 x 1700 x 1500 mm Very good condition (!!) Current new price including accessories approx. 135.000 Euro Special price upon request Features: - Robust electro-hydraulic 3-roll bending machine - All 3 rolls directly driven via planetary gears - Conical rolling possible by tilting the rolls - Parallelism of the side rolls via torsion shafts - Double-sided bending - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Permanent lubrication of all bearings - Sturdy welded steel construction - 1 mobile control panel * with digital position indicators for the side rolls * Control via joysticks - 2 bending speeds selectable - Electro-hydraulic folding bearing for easy adjustment Pipe removal - Pressure gauge / pressure indicator for the rollers Gielhcowkvl Dscqneu - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, Year of construction: 2008, sheet width 2050 mm plate thickness 10.0 mm ST Golhowi Ufyeccqneiu pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm bending speed ca. 2.0 + 5.0 m/min Control ELAP LYNX oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 5000 kg range L-W-H 3500 x 1550 x 1400 mm Very good condition (!!) Current new price including accessories approx. 90.000 Euro Special price upon request Equipment: - Robust electro-hydraulic 4-roll bending machine - 4-roll concept offers a wide range of bending and rounding options - MG NC control unit "ELAP LYNX" * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks * Freely movable control panel - Two central rolls are directly driven by hydraulic motors - Conical rolling is possible by tilting the rolls - Parallelism of the side rolls via torsion shafts - Pre-bending on both sides - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Permanent lubrication of all components Bearings - Sturdy welded steel construction - 2x bending speeds selectable - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure indicator for the rollers - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, Year of construction: 2016, pressure 20.0 t chamfer lenght 850 mm distance between columns 850 mm back stop - adjustable 375 + 400 mm stroke of upper beam 196 mm dayligth 470 mm ajustment speed 200 mm/sec table height ca. 900 mm total power requirement 5.0 kW weight of the machine ca. 2500 kg New price ~ 85.000 euros well-kept / very good condition (!!) with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - ?v=foxzKIA7vX8 Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design Gislhccqswh Ugzenou - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm

Condition: used, Year of construction: 1987, sheet width - max. 2035 mm plate thickness 4.0 mm ST Golhjwh Uguoccqnjiu plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control TOUCH total power requirement 8.5 kW weight of the machine ca. 3100 kg range L-W-H 2416 x 2250 x 1760 mm Machine from training workshop good / well-maintained condition (!!) Equipment: - electro-hydraulic NC guillotine shears - electro-motoric back stop * with NC control unit (ELGO) - electric cutting length limit - manual cutting gap adjustment - front support table including recessed grips - 1x stable side stop, with scale and tilting cam - 2x stable, front support arms - 1x freely movable foot switch - front finger guard - rear sheet metal slide - EMERGENCY STOP button at the front - operating instructions * Special accessories included: - 1x FASTI replacement blade for model 509-20/4

Condition: used, Year of construction: 1995, pressure 80.0 t chamfer lenght 2050 mm distance between columns 1550 mm column arm 250 mm table width 85.0 / 135 mm stroke ca. 390 mm dayligth ca. 585 mm ajustment speed 180 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec work height max. 1050 mm Number of working hours 32.495 h oil volume 200 l operating pressure 320 bar total power requirement 11.6 KW weight of the machine ca. 7300 kg range L-W-H 3700 x 2000 x 3000 mm Good/well-maintained condition (!!) - in checked conditions - machinevideo - ?v=IKyUmzB0WTI ----- CNC electro-hydraulic press brake with: * Increased installation height .. approx. 550 mm * Increased cylinder stroke .. approx. 390 mm ----- Features: - Robust electro-hydraulic press brake * MADE IN GERMANY (!!) - CYBELEC CNC control "DNC 904 PS-A" (SN 0332) Golhcowfttzecqnoiu * Pivoting, front right * High-resolution graphic display * Clear, easy-to-read menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bending sequence calculation - CNC-controlled axis adjustment: Y1+Y2 / X / R axes - CNC electro-motorized backgauge (X axis) * With 4 manually adjustable stop fingers - CNC Electric height adjustment (R axis) - WEINBRENNER electro-hydraulic upper tool clamp - WEINBRENNER electro-hydraulic lower tool clamp - 1x freely movable 2-hand/foot control - 2x front, movable support arms - Side safety device (swinging doors) - Rear safety device (swinging doors) - Machine/control manual + circuit diagram

Condition: used, Year of construction: 2007, puncher 50.0 t square edge steel 30.0 x 30.0 mm round bar steel 35.0 mm L-beam 80 x 80 x 8.0 mm Gislhccqjwd Tw Ronsu hole punching press: capacity (dia. x thick.) Ø 31.0 x 12.0 mm shear: flat material 350 x 15.0 mm throat 175 mm work height max. 950 / 1050 mm total power requirement 3.0 kW weight 950 kg range L-W-H 1300 x 1100 x 1850 mm Good condition (!!) Current new price approx. 16.000 Euro Special price upon request Equipment: - Robust electro-hydraulic profile steel shears - With multiple workstations: * Flat steel shears * Profile steel shears * Hole punch * Notching station - Driven by hydraulic cylinders - Continuous stroke adjustment - Support table at punching station * Including material stop * Including material stripper - Support table for notching station (square notcher) - Side storage options - 1x GEKA electric contact length stop - 1x GEKA freely movable foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 1995, x-travel 700 mm y-travel 315 mm z-travel 495 mm turning speeds 50 - 9200 U/min spindle taper ISO SK 30 DIN 69871 A quill stroke 178 mm table: 1230 x 410 mm workpiece weight max. 250 kg T-slots 7 x 12-H8 feed range X+Y 9.000 / Z 4.000 mm/min solution in X-, Y- und Z-axis 0.001 mm distance spindle /table 165 / 660 mm 32 weight of tools max. 3.0 kg Time for tool-changing ca. 5.0 sec Boring power Ø 30.0 mm threading M 24 Milling performance 100 cm³/min coolant capacity 100 l control TNC 415 B voltage 3x 400 V total power requirement 16.0 kW weight of the machine ca. 3400 kg range L-W-H 2500 x 2500 x 2800 mm Good / well-maintained condition (!!) Features: - Robust machining center - Vertical * Vertical milling and drilling machine in single-column design * With integrated coordinate table * Height-adjustable machine head with extendable spindle sleeve - CNC HEIDENHAIN control unit "TNC 415 B", front left * Includes separate remote control - Electric motor adjustment of all axes (X/Y/Z/W axes) * Rapid traverse in all 4 directions * X+Y axes .. max. 9.000 mm/min * Z axis .. max. 4.000 mm/min * W axis .. max. 4.500 mm/min - Continuously variable speed .. 50-9.200 rpm - Heavy-duty, robust coordinate table including 7 T-slots * Two telescopic steel covers protect the cross guides * X-axis: dovetail guide * Y-axis: preloaded roller shoes on hardened steel rails * Axis driven by ball screws * With preloaded double nuts * And DC servo motors mounted directly in the spindle axis * Both axes are equipped with linear scales (direct position measurement) - CNC-controlled machine head (W axis = feed axis) * Driven by DC servo motors / toothed belt drive and ball screw * Machine head is permanently mechanically clamped by disc spring assemblies Golhswbvg Noccqnoiu * For a secure and stable connection between the head and the machine bed * Milling and drilling spindles are mounted in the quill, . requiring no maintenance * Spindle head according to DIN 2079 allows for the use of SK 30 tools * Tool changer with 32 positions - Machine base with two drawer cabinets for machine accessories * Includes numerous tools - Work area with fully protected cabin * With wide-opening cabin doors - Coolant with external coolant reservoir - VOGEL automatic central lubrication system * Supplies oil to the guides, spindles, and drive - Original operating instructions + spare parts lists

Condition: used, sheet width 1050 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm distance between columns 1200 mm blade length 1150 mm no. of strokes 46 - 69 Hub/min cutting angle 1.30 ° Control konv. oil volume 100 ltr. total power requirement 5.68 kW Gijlhcev U Dgrecqnju weight 1100 kg range L-W-H 1600 x 1500 x 1400 mm From a maintenance workshop In good condition (!!) Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge * Backlash-free ball screw for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 2007, sheet width 4080 mm plate thickness 2.5 mm ST thickness at "Niro-steel" 1.5 mm no. of strokes 34 Hub/min cutting angle 1.3 Grad table height 820 mm distance between columns 4310 mm Control POS 100 engine output 9.0 kW weight of the machine ca. 3600 kg. Giolhjv Uq Iioccqnju range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. 70.000 Euro Special price upon request The MHSUV motorized guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, low-noise, and powerful gear motor. The high static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports, and the main drive unit. The motorized guillotine shear was developed for sheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shear - with SCHRÖDER POS 100 NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC motorized backgauge - "Duo-Cut" drive with two dynamic, powerful gear motors - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions (PDF) Optional accessories included: - Pneumatic sheet holding device for thin sheet metal blanks

Condition: used, Year of construction: 1992, sheet width 2030 mm plate thickness 2.0 mm ST plate thickness 3.0 mm ALU distance between columns 2100 mm no. of strokes 34 Hub/min cutting angle 2.0 ° back stop - adjustable max. 750 mm total power requirement 2.5 kW Gjlhccov T Nppjqneiu weight 1150 kg range L-W-H 2400 x 1400 x 1100 mm From a maintenance workshop Current new price approx. €28,000 Special price upon request The MHSU model motorized guillotine shear was developed for sheet metal and plastic processing. With these shears, you can effortlessly produce clean cuts in series. Features: - Robust, motorized swing-cut guillotine shear - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Manual depth/backgauge * Adjustment via handwheel from the rear * Adjustment range max. 750 mm - 1x hold-down bar - Support/work table with 10 mm groove spacing - Extended, extendable support table - 1x freely movable foot switch - Operating instructions (PDF)