APM-Schinn, Maschinen und Entsorgungssysteme

Condition: excellent (used), Year of construction: 2010, Extraction / Mobile Dust Extractor Vacumobile EA160 Machine in excellent condition – very little use – Extraction diameter: 160 mm Year of manufacture: 2010 Weight: 287 kg Rated airflow: 1500 m³/h Iedpsxpkftefx Afioih Maximum airflow: 2750 m³/h Motor power: 3 kW Automatic motor-driven cleaning: 0.18 kW Location: ex stock 54634 Bitburg – immediately available –

Condition: good (used), functionality: fully functional, type of input current: three-phase, total height: 2,000 mm, total width: 900 mm, total length: 1,600 mm, Höcker Polytechnik VACUMOBIL EA 160 Self-cleaning Dust & Chip Extractor Specification: • Condition – used, after inspection • Manufacturer – Höcker Polytechnik • Model – VACUMOBIL EA 160 • Turbine motor power – 3.45 kW • Filter self-cleaning mechanism • Turbine inlet – dia. 160 mm • One collection bin for dust/chips Ijdoxph Dajpfx Afieih • Automatic mode for extractor start synchronised with machine • Overall dimensions – 160 x 90 x 200 cm (L x W x H) Additional information: • Good, factory technical condition • Photos show the actual condition of the item for sale • Possibility to switch on and test the device on site

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 35.02.003.16, Fully functioning and comes with loads of extras: Ducting, automatic valves and automatic control unit. Clean air dust collector RL 300 Extraction connection 300 mm on the right (can be converted to the left) Nominal volume flow 6000 m³/h, H3 "GS dust tested, JET cleaning Iodsxpgq Eopfx Afieih Compressed air connection 3/4 inch Connection pressure 7-12 bar with 50NL/min Operating pressure in the device 6 bar Chip container capacity 2x210l Extinguishing device with water connection For the extinguishing device, the clean air extraction unit must be connected to the domestic water supply. - The extinguishing device must be connected to the domestic water supply 1/2" with at least 4 bar. - The minimum water pressure after triggering must be 1 bar. - The connecting line between the fixed piping and the machine must not exceed 1 m and must not restrict the flow rate. Cartridge filter standard RL300

Condition: used, No. 04492 Mobile extraction unit / Mobile dust extractor with fine dust filter cartridge Bernardo DC 400 Used Iiodpsxn Tlyofx Afieh Air flow rate 2520 m3/h High air flow rate due to large filter surface Including cleaning brush for manual filter cleaning Effective filtering of finest particles Filter surface 4 m2 Max. negative pressure 1800 Pa Suction connection diameter 1x 130 mm / 2x 100 mm Chip bag capacity 300 l Idle speed 2950 rpm Sound pressure 87.1 dB Motor output power S1 100% 1.5 kW (2.0 hp) Voltage 400 V / 50 Hz With dust protection housing self-construction No further documentation available Transport dimensions approx. 1100 x 600 x 2100 mm LWH Weight approx. 75 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Isdpfsxn Tilox Afioih Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, For sale: Schuko Vacomat 200P, year of manufacture 1999, from a well-maintained workshop environment. The unit runs flawlessly and is ready for immediate use—ideal for woodworking shops, joineries, or CNC workstations with high chip and dust volumes. 🔧 Technical Data: Motor power: 3.7 kW (400 V three-phase) Airflow: approx. 2,500 m³/h Negative pressure: approx. 2,800 Pa Filter surface area: approx. 14.5 m² Inlet diameter: Ø 200 mm Chip collection containers: 3 × 160 l, individually dischargeable Filter cleaning: pneumatic (compressed air pulse) Dimensions (L × W × H): approx. 2,600 × 900 × 2,100 mm Ijdpfoxn Nu Dox Afioih Weight: approx. 350 kg Sound pressure level: approx. 75 dB(A) ✅ Condition: Fully operational, ready for immediate use Regularly serviced Normal age-related signs of use 📦 Special features: Pneumatic filter cleaning – maintains constant suction performance Large filter surface for efficient extraction Three separate collection bins – easy to empty Mobile & compact – flexible use in the workshop Proven, durable Schuko quality "Made in Germany" 💶 Price: negotiable 📍 Location: Haldensleben 🚚 Collection preferred, transport or shipping available by arrangement

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested Iodpfx Afsxnxm Nsioih - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Max. air flow rate 2900 m³/h Inlet diameter 200 mm Max. negative pressure 3500 Pa Drive power 4.0 kW Filter area 24 m² Filter elements 2 pcs. Dust collection bin 38 l Dimensions 1,660 x 840 x 1,640 (L/W/H) mm Weight 310 kg Sound pressure level 72 dB(A) Metal chips Metal dusts Plastic dusts Iiedpoxnrxxefx Afish Plastic chips Cotton dusts Paper dusts Welding fumes Soldering fumes

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Ijdpfxjxnqaus Afieih Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Isdpfxoxnprcj Afisih Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2018, Nominal air flow: 5,089 m³/h Inlet nozzle: Ø 300 mm Negative pressure at nozzle: 2,434 Pa Filter cleaning: compressed air Chip collection volume: 3 x 165 liters Motor power: 7.5 kW | 400 V - 50 Hz / IE3 Sound pressure level: 71 dB(A) Max. compressed air connection: 6.0 bar Protection: 25 A Dimensions (LxWxH): 3,050 x 1,058 x 2,361 mm Weight (net): approx. 952 kg Stock location: Nattheim Iodpfx Aexnlapefieih

Condition: used, mobile extraction unit with filter bag on top Ijdpfx Asxnfflsfieih extraction nozzle 140 mm motor 400 V 1.1 kW Availability: short-term Stock location: Flörsheim

Condition: good (used), functionality: fully functional, type of input current: three-phase, CORAL Sawdust Extraction Unit, 1 Bag, 2.2 kW Specification: • Condition – used • Manufacturer – CORAL • Turbine motor power – 2.2 kW (3-phase) Iiedexnbl Iepfx Afish • Turbine inlet – 200 mm • Collection bag diameter – 1 x Ø 450 mm • 1 filter bag, size – 450 x 1100 mm (new) • Overall dimensions: 110 x 56 x 225 cm (L x W x H) Additional information: • Good, original technical and visual condition • The photos shown reflect the actual condition of the item for sale • Possibility to connect and test the unit on site • The price listed in the auction does not include VAT

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, 2-bag sawdust extractor 4.0 kW Specification: • condition – used, after inspection • turbine motor power – 4.0 kW • turbine inlet – Ø 250 mm • collection bag diameter – 2 x Ø 600 mm • 2 x filter bags, dimensions – 600 x 1350 mm (new) • capacity approx. 5,000 m3/h • overall dimensions 189 x 73 x 267 cm (L x W x H) Additional information: • very good technical and visual condition, factory standard • the provided photos show the actual condition of the item for sale Isdpfx Afexnbk Rjisih • possibility to connect and test the device on site

Condition: like new (used), functionality: fully functional, type of input current: three-phase, Dust Extractor RL 350 3 x 400V 50Hz 15HP 11kW | Power and speed adjustment through pressure measurement | Powder extinguisher instead of water extinguisher • Max. air flow rate: 8000 m³/h • Nominal air flow rate: 20 m/sec, 6920 m³/h • Vacuum: 2630 Pa • Filter (surface) area: 71 m² Iodpfxoxm Swfo Afisih • Extraction port diameter: 350 mm • Remaining dust concentration, returned airflow quality:

Condition: used, functionality: fully functional, type of input current: three-phase, Felder RL-300 clean air extraction unit with a maximum air flow rate of 6,000 m³/h. The extraction unit is in as-new condition and has very low working hours. Technical specifications: - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm Iiedpfexm Suwsx Afish - Chip container volume: 2 x 210 liters - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) - Automatic extinguishing system - Steel impeller - Motor power: 8.2 kW The clean air unit is located in Estonia and can be inspected at any time during our business hours. Related terms: extraction, extraction unit, clean air unit, clean air, RL

Condition: excellent (used), NESTRO 535525 clean air extraction - used - ----- Technical specifications ----- Extraction nozzle Ø: 250/300 mm, Nominal air flow: 5000 m³/h, Minimum air flow: 3532 m³/h, Filter area: 25.2 m², Number of bags: 3 pcs, Iodpoxlt Dkofx Afieih Motor: 5.5 kW, Weight: 740 kg Quality info: - complete basic cleaning - immediately ready for operation

Condition: ready for operation (used), Year of construction: 2014, Spänex SMU 6000.1 Iijdpexlk Tvjfx Afijh Extraction diameter: 300 mm Motor power: 7.5 kW H3 tested 2 bins of 165 l each Space requirement: 2710 x 900 x 1965 mm Price: 10,000.- Condition: Function tested

Condition: used, Bag house filter system, used, 4-bag unit, approx. 34 m² filter area, length approx. 2820 mm, width approx. 785 mm, height approx. 3200 mm. Equipped with SP 315 K 1 fan, 6400 m³/h, 7.5 kW, 2300 Pa, 2890 rpm. Location: Rhineland-Palatinate. Availability: by arrangement. Ijdpexiztbjfx Afisih

Condition: used, Year of construction: 2025, including piping as agreed, extraction nozzle 300 mm left, nominal airflow rate: 6000 m³/h, JET cleaning, chip container 2x 210 l, motor 8.2 kW (11 HP), extinguishing system with powder extinguisher, dry powder fire extinguisher 12 kg, silencer. Storage location: customer Iodpfexguvkex Afisih

Condition: used, Year of construction: 1997, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Iodpfx Aexgn Rhofijih Machine height: 2200 mm Weight:

Condition: used, Year of construction: 2014, Extraction nozzle diameter: 160 mm Iisdpfxexgn Rus Afish Nominal volumetric flow: 1950 m³/h Volumetric flow monitoring: differential pressure indicator Vacuum: 3200 Pa Filter area: Filter cleaning: motorized Motor power: 2.2 kW Machine length: Machine width: Machine height: Weight: 320 kg

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Nominal volumetric flow: 2050 m³/h Volumetric flow monitoring: differential pressure indicator Filter area: Filter cleaning: motorized Motor power: 3 kW Machine length: Machine width: Machine height: Weight: 250 kg Iijdpfoxgn Rnjx Afish

Condition: used, Year of construction: 2003, functionality: fully functional, AL-KO MOBIL 100, mobile extraction unit, year of manufacture 2003, 865 m³/h, 1780 Pa, 230 Volt Iisdoxf E R Aepfx Afieh

Condition: as good as new (ex-display), Year of construction: 2023, Exhibition Machine For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air volume flow of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our specialist staff. (Fully functional) Technical data: - H3 dust tested - Residual dust content < 0.1 mg/m³ - Max. air volume flow 1900 m³/h Iodpfxoxd Aits Afisih - Chip collection volume 200 litres - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117-102